Search QC/T
500 QC/T standards in English, from QC/T 836-2010 to QC/T 1281-2026, in code order.
- QC/T 836-2010Classification and codes of special purpose vehicles$105.00
- QC/T 837-2010Types of hybrid electric vehicles$75.00
- QC/T 838-2010Ultracapacitor electric city buses$165.00
- QC/T 839-2010Power supply systems for ultracapacitor electric city buses$135.00
- QC/T 840-2010Specifications and dimensions of traction batteries for electric vehicles$35.00
- QC/T 841-2010Conductive charge couplers for electric vehicles$125.00
- QC/T 842-2010Communication protocols between battery management systems and off-board chargers for electric vehicles$85.00
- QC/T 843-2011General specifications for stretched limousines$105.00
- QC/T 844-2011Technical specifications for seat recliners of passenger cars$85.00
- QC/T 845-2011Technical specifications for seat locks of passenger cars$249.00
- QC/T 846-2011General specifications for heavy-duty flatbed transport vehicles$255.00
- QC/T 847-2011Sewer dredging vehicles$135.00
- QC/T 848-2011Hook-arm self-loading and unloading devices$195.00
- QC/T 848-2023Hook-arm self-loading and unloading devices$345.00
- QC/T 849-2011Stage vehicles$135.00
- QC/T 849-2023Stage vehicles$255.00
- QC/T 850-2011Polyurethane foam for passenger car seats$155.00
- QC/T 851-2011Reinforcing adhesive sheets for automobiles$225.00
- QC/T 852-2011Hemming adhesives for automobiles$105.00
- QC/T 853-2011Hexagon flange bolts with chip-clearing thread$135.00
- QC/T 854-2011Shouldered double end studs$135.00
- QC/T 855-2011Hexalobular socket pan head screws$145.00
- QC/T 856-2011Hexalobular socket countersunk head screws$145.00
- QC/T 857-2011Weld studs$135.00
- QC/T 857-2023Weld studs$225.00
- QC/T 858-2011Hexagon thick nuts - Fine pitch thread$135.00
- QC/T 859-2011Square nut cages - Type A$105.00
- QC/T 860-2011Hexagon weld nuts$135.00
- QC/T 861-2011Flat head hexagon blind rivet nuts with closed end$135.00
- QC/T 862-2011Square nut cages - Type B$165.00
- QC/T 863-2011Square weld nuts$135.00
- QC/T 864-2011Hexagon nuts with serrated flange$135.00
- QC/T 865-2011Tapping rivets$135.00
- QC/T 866-2011Hexalobular socket raised countersunk head screws$135.00
- QC/T 867-2011Round weld nuts$165.00
- QC/T 868-2011Plastic hexagon nuts$165.00
- QC/T 869-2011Short-cycle drawn arc welding studs$189.00
- QC/T 869-2022Short-cycle drawn arc welding studs$55.00
- QC/T 870-2011Double end studs bm=1.25d$165.00
- QC/T 870-2022Double end studs bm=1.25d$90.00
- QC/T 871-2011Double end studs bm=2d$165.00
- QC/T 871-2022Double end studs bm=2d$70.00
- QC/T 872-2011Hexagon flange weld nuts$165.00
- QC/T 873-2011Hexalobular socket raised countersunk (oval) head self drilling screws with tapping screw thread$145.00
- QC/T 874-2011Hexalobular socket countersunk head self drilling screws with tapping screw thread$165.00
- QC/T 875-2011Hexalobular socket pan head self drilling screws with tapping screw thread$105.00
- QC/T 876-2011Hexagon collar head tapping screws for plastics$165.00
- QC/T 877-2011Hexagon flange head tapping screws for plastics$135.00
- QC/T 878-2011Hexalobular socket pan head tapping screws for plastics$135.00
- QC/T 879-2011Through-hole embedded plastic nuts - Type E$135.00
- QC/T 880-2011Anti-removal bolts$135.00
- QC/T 881-2011Welding studs for plastics$135.00
- QC/T 882-2011Split clamps$135.00
- QC/T 883-2011Sealing plugs$85.00
- QC/T 884-2011Hexagon socket taper plugs with magnetic core$135.00
- QC/T 885-2011Prevailing torque type spring nuts - Type B$135.00
- QC/T 886-2011Arc welding pins$105.00
- QC/T 887-2011Ventilation tube assemblies$105.00
- QC/T 888-2011Prevailing torque type all-metal hexagon collar weld nuts$165.00
- QC/T 889-2011Retaining rings for shafts - Type A$165.00
- QC/T 890-2011Through-hole embedded plastic nuts - Type D$165.00
- QC/T 891-2011Welding screws for plastics$165.00
- QC/T 892-2011Open end blind rivets with break pull mandrel and protruding head for plastic parts$165.00
- QC/T 893-2011Failure classification and assessment of drive motor systems for electric vehicles$75.00
- QC/T 894-2011On-board measurement methods for pollutant emissions from heavy-duty hybrid electric vehicles$1,670.00
- QC/T 895-2011Conductive on-board chargers for electric vehicles$55.00
- QC/T 896-2011Interfaces of drive motor systems for electric vehicles$55.00
- QC/T 897-2011Technical specification of battery management system for electric vehicles$105.00
- QC/T 898-2013Spokes for motorcycles and mopeds$165.00
- QC/T 899-2013Spoke nipples for motorcycles and mopeds$115.00
- QC/T 900-1997Evaluation method for quality inspection of complete vehicle products$4,340.00
- QC/T 901-1998Evaluation method for quality inspection of automotive engine products$409.00
- QC/T 901-2026Quality inspection and evaluation method of automobile engine products$165.00
- QC/T 902-2013Technical specifications for electronically controlled fuel injection systems of motorcycles$485.00
- QC/T 903-2013Failure modes of motorcycles and mopeds$480.00
- QC/T 904-2013Wheel hubs for motorcycles and mopeds$209.00
- QC/T 905-2013Protective bars for automobiles$145.00
- QC/T 906-2013Technical requirements and test methods for hemp fibre composite boards for automotive interior trim$285.00
- QC/T 907-2013Test methods for heat dissipation performance of automotive radiators$235.00
- QC/T 908-2013Horse transport vehicles$325.00
- QC/T 909-2013Bitumen-cement mortar mixing semi-trailers$590.00
- QC/T 910-2013Glass transport semi-trailers$325.00
- QC/T 911-2013Power supply vehicles$165.00
- QC/T 911-2023Power supply vehicles$270.00
- QC/T 912-2013Technical requirements for matching of semi-trailer towing vehicles and semi-trailers$229.00
- QC/T 912-2026Technical requirements for matching of towing vehicle and trailer$120.00
- QC/T 913-2013General technical specifications for hydraulic suspension trailers$355.00
- QC/T 914-2013Type approval test procedure for dimethyl ether vehicles$205.00
- QC/T 915-2013Integrated cylinder valves for vehicle dimethyl ether cylinders$355.00
- QC/T 916-2013Technical specifications for mono-fuel dimethyl ether engines of heavy-duty vehicles$335.00
- QC/T 917-2013Manual shut-off valves for gas-fuelled vehicles$115.00
- QC/T 917-2024Manual shut-off valves for gas-fuelled vehicles$165.00
- QC/T 918-2013Test methods for automotive gasoline filters$465.00
- QC/T 919-2013Test methods for automotive lubricating oil filters$500.00
- QC/T 920-2013Specifications for full-flow lubricating oil filter assemblies for automobiles$229.00
- QC/T 921-2013Specifications and test methods for by-pass centrifugal lubricating oil filters for automobiles$375.00
- QC/T 922-2013Specifications for paper elements of automotive air filters$229.00
- QC/T 922-2023Air filter element for automobiles$180.00
- QC/T 923-2013Specifications for fuel pre-filter assemblies of automotive diesel engines$269.00
- QC/T 924-2011Fuel consumption limits for heavy-duty commercial vehicles (The first stage)$105.00
- QC/T 925-2013Ultracapacitor electric city buses - Type approval test procedure$285.00
- QC/T 926-2013Reliability test methods for power units of light hybrid electric vehicles (ISG type)$75.00
- QC/T 927-2013Flange coupling connectors$225.00
- QC/T 928-2013Plastic cable and tubing clips with middle fixing hole$165.00
- QC/T 928-2022Plastic cable and tubing clips with middle fixing hole$90.00
- QC/T 929-2013Plastic cable and tubing clips with side fixing hole$165.00
- QC/T 929-2022Plastic cable and tubing clips with side fixing hole$90.00
- QC/T 930-2013Clamps for corrugated pipes$165.00
- QC/T 931-2013Heavy duty hose clamps$165.00
- QC/T 932-2012Emergency shut-off valves for road tank vehicles transporting dangerous liquid goods$125.00
- QC/T 932-2018Emergency shut-off valves for road tank vehicles transporting dangerous liquid goods$355.00
- QC/T 933-2012Technical specifications for radio control vehicles$165.00
- QC/T 934-2012Technical specifications for radio monitoring vehicles$165.00
- QC/T 935-2013Kitchen waste collection vehicles$85.00
- QC/T 935-2025Kitchen garbage vehicle$330.00
- QC/T 936-2013Detachable container refuse collection vehicles$249.00
- QC/T 937-2013Guardrail repair vehicles$85.00
- QC/T 938-2013Test procedure for pedestrian protection in vehicle collisions$135.00
- QC/T 939-2013Technical specifications for front-discharge concrete truck mixers$145.00
- QC/T 940-2013Exhibition vehicles$85.00
- QC/T 941-2013Test method for mercury in automotive materials$145.00
- QC/T 942-2013Test method for hexavalent chromium in automotive materials$325.00
- QC/T 942-2021Test methods of hexavalent chromium in automotive materials$455.00
- QC/T 943-2013Test method for lead and cadmium in automotive materials$155.00
- QC/T 944-2013Test method for polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in automotive materials$105.00
- QC/T 945-2013Air conditioning systems for passenger cars$115.00
- QC/T 946-2013Performance requirements and test methods for automotive safety belt webbing$145.00
- QC/T 946-2024Automotive safety belt webbing$165.00
- QC/T 947-2013Technical specifications for automatic anti-glare rear-view mirrors of automobiles$145.00
- QC/T 947-2025Automatic anti-glare mirrors for motor vehicle$433.00
- QC/T 948-2013Roof load carriers for automobiles$710.00
- QC/T 949-2013Specifications for on-board audio players$205.00
- QC/T 950-2013Technical requirements and test methods for automobile seat heating pads$85.00
- QC/T 950-2019Technical requirements and test methods for automobile seat heating pads$270.00
- QC/T 951-2013Circuit breakers for automobiles$205.00
- QC/T 952-2013Disc wheels for passenger cars - Attachment dimensions on hubs$85.00
- QC/T 952-2025Disc wheels for passenger car - Dimensional of attachment on hub$321.00
- QC/T 953-2013Commercial vehicles - Flat attachment wheel fixing nuts$70.00
- QC/T 954-2013Commercial vehicles - Flat attachment fixing nuts - Test methods$70.00
- QC/T 955-2013Automatic leveling support devices for special purpose vehicles$85.00
- QC/T 956-2013Dry-mixed mortar transport vehicles$85.00
- QC/T 957-2013Washing and sweeping vehicles$205.00
- QC/T 957-2023car wash$300.00
- QC/T 958-2013Performance requirements and bench test methods for automotive vacuum pumps$145.00
- QC/T 959-2013Performance requirements and bench test methods for mechanical parking brake control lever assemblies$115.00
- QC/T 960.1-2013Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats$115.00
- QC/T 961-2013Performance requirements and bench test methods for plastic reservoir assemblies of hydraulic braking systems$115.00
- QC/T 962-2014Specifications for paint coatings of motorcycles and mopeds$235.00
- QC/T 963-2014Wheel brake rings for motorcycles and mopeds$85.00
- QC/T 963-2026Drum brake of motorcycles and mopeds wheels$135.00
- QC/T 964-2014Strength of plastic seats and their anchorages for city buses$85.00
- QC/T 965-2014Actuators for electric rear-view mirrors of motor vehicles$145.00
- QC/T 966-2014Technical specifications for coatings of automotive plastic parts$185.00
- QC/T 967-2014Port fuel injectors for gasoline engines$235.00
- QC/T 968-2014Determination methods of platinum, palladium and rhodium contents in metallic catalytic converters$205.00
- QC/T 969-2014Interior trunk release mechanisms for passenger cars$85.00
- QC/T 970-2014Technical specifications for passenger car air filters$125.00
- QC/T 971-2014Specifications for air filter elements of motorcycles and mopeds$85.00
- QC/T 972-2014Technical requirements and test methods for automotive electronically controlled hydraulic power steering gear assemblies$175.00
- QC/T 973-2014Wheel cushion blocks for motorcycles and mopeds$145.00
- QC/T 974-2014Specifications for cargo boxes of three-wheeled motorcycles and mopeds$90.00
- QC/T 975-2014Drive axles for three-wheeled motorcycles and mopeds$205.00
- QC/T 976-2014Wheel cushion sleeves for motorcycles and mopeds$235.00
- QC/T 977-2014Technical specifications for automotive electronic accelerator pedal assemblies$165.00
- QC/T 978-2014Technical specifications for auxiliary control relays of automotive starters$85.00
- QC/T 979-2014Waterproof breathable vents for protection of automotive electrical and electronic equipment$145.00
- QC/T 980-2014Coal transport vehicles$85.00
- QC/T 981-2014Wheels for motor vehicles - Surface paint coatings$85.00
- QC/T 981-2026Wheels for motor vehicles - Surface paint coatings$85.00
- QC/T 982-2014Technical specification for laser and electron beam welding of automotive transmission gears$205.00
- QC/T 983-2014Cleanliness test method for automotive manual transmission assemblies$115.00
- QC/T 983-2025Measuring method of cleanliness of automobile transmission assembly$405.00
- QC/T 984-2014Requirements for replacement installation of automotive glass$145.00
- QC/T 985-2014Automotive heat-reflective coated laminated windscreens$145.00
- QC/T 985-2024Automotive heat-reflective coated laminated windscreens$240.00
- QC/T 986-2014Condensate atomizing devices for vehicle air conditioning$175.00
- QC/T 987-2014Performance requirements and test methods for safety belt retractors of motor vehicles$85.00
- QC/T 988-2014Outside door handles for motor vehicles$115.00
- QC/T 989-2014General requirements for traction battery enclosures of electric vehicles$65.00
- QC/T 990-2014Zinc-air batteries for electric vehicles$185.00
- QC/T 991-2015Passenger cars - Light alloy wheels - 90° impact test method$125.00
- QC/T 992-2015Municipal engineering emergency rescue vehicles$145.00
- QC/T 993-2015Explosives transport vehicles$235.00
- QC/T 994-2015Demountable tank carrier vehicles$295.00
- QC/T 995-2015Hydraulically driven modular transporters$235.00
- QC/T 996-2015Technical requirements and bench test methods for automotive air dryers$205.00
- QC/T 997-2015Structural requirements for fully load-bearing integral frame bodies of buses$85.00
- QC/T 998-2015Technical specifications for automotive cabin air filters$125.00
- QC/T 998-2023Cabin air filter for automobiles$300.00
- QC/T 999-2015Specifications for by-pass lubricating oil filter assemblies for automobiles$205.00
- QC/T 1000.1-2015Performance requirements and test methods for nonwovens of automotive filters - Part 1: Nonwovens for cabin air filters$125.00
- QC/T 1000.2-2015Performance requirements and test methods for nonwovens of automotive filters - Part 2: Nonwovens for air filters$150.00
- QC/T 1001-2015Evaluation of filtration performance of automotive lubricating oil filters - Particle counting method$235.00
- QC/T 1002-2015Bench durability test method for motorcycles and mopeds$189.00
- QC/T 1003-2015Determination of precious metal content in metal substrate catalytic converters for motorcycles$85.00
- QC/T 1004-2015Performance requirements and bench test methods for automotive electric vacuum pumps$85.00
- QC/T 1005-2015Technical requirements and bench test methods for hydraulic solenoid modulators of automotive anti-lock braking systems$145.00
- QC/T 1005-2026Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive$525.00
- QC/T 1006-2015Technical requirements and bench test methods for pneumatic solenoid modulators of automotive anti-lock braking systems$145.00
- QC/T 1007-2015Evaluation of filtration performance of automotive fuel filters - Particle counting method$235.00
- QC/T 1008-2015Specifications for fuel tank ventilation filters$85.00
- QC/T 1009-2015Specifications for automatic transmission filters of passenger cars$85.00
- QC/T 1010-2015Technical requirements and bench test methods for boosters of clutch hydraulic-pneumatic booster systems$145.00
- QC/T 1010-2023Clutch boosters for automobiles$255.00
- QC/T 1011-2015Technical requirements and bench test methods for master cylinders of clutch hydraulic-pneumatic booster systems$85.00
- QC/T 1011-2023Clutch master cylinders for automobiles$315.00
- QC/T 1012-2015Technical requirements and determination method for cleanliness of automotive hydraulic power steering systems$85.00
- QC/T 1013-2015Technical requirements and test methods for rotary shaft lip seals of steering gear input shafts$85.00
- QC/T 1014-2015Commutators for starter motors of automobiles and motorcycles$175.00
- QC/T 1015-2015Automotive air conditioning controllers$235.00
- QC/T 1016-2015Door trim panel assemblies for passenger cars$235.00
- QC/T 1016-2022Door trim panel assemblies for passenger cars$240.00
- QC/T 1017-2015Headlamp cleaning nozzle assemblies for automobiles$205.00
- QC/T 1018-2015Automotive step boards$205.00
- QC/T 1019-2015Performance requirements and bench test methods for automotive gear shift control devices$205.00
- QC/T 1020-2015Test methods for automotive constant velocity universal joints and assemblies$309.00
- QC/T 1020-2023Drive shaft assembly for automobiles$420.00
- QC/T 1021-2015Performance requirements and bench test methods for ball joint assemblies of automotive independent suspensions$205.00
- QC/T 1022-2015Technical specifications for reduction gearbox assemblies of battery electric passenger cars$95.00
- QC/T 1022-2026Technical specifications and test methods of reduction gearbox for battery electric vehicles$390.00
- QC/T 1023-2015General requirements for traction battery systems of electric vehicles$85.00
- QC/T 1024-2015One-component polyurethane sealants for automobiles$235.00
- QC/T 1025-2016Performance requirements and bench test methods for automatic transmission oil pumps$125.00
- QC/T 1026-2016Performance and testing of PVC slush-moulded skins for automotive instrument panels$115.00
- QC/T 1027-2016Technical requirements for film-applied automotive glass$345.00
- QC/T 1028-2016Performance requirements and test methods for automotive vacuum check valves$85.00
- QC/T 1029-2016Polypropylene (PP) honeycomb board products for automobiles$85.00
- QC/T 1030-2016Push-out emergency windows for buses$255.00
- QC/T 1030-2023Passenger car push-out emergency window$569.00
- QC/T 1031-2016Wheel spline sleeves for motorcycles and mopeds$225.00
- QC/T 1032-2016Engine camshafts for motorcycles and mopeds$240.00
- QC/T 1033-2016Air brakes - Technical requirements and bench test methods for external automatic slack adjusters$125.00
- QC/T 1034-2016Rectifier bridges for automotive alternators$235.00
- QC/T 1035-2016Electronic throttle bodies for automotive engines$235.00
- QC/T 1036-2016Automotive power inverters$295.00
- QC/T 1037-2016High-voltage cables for road vehicles$105.00
- QC/T 1038-2016Light-emitting diodes (LED) and modules for automobiles$295.00
- QC/T 1039-2016Sun sensors for automotive air conditioning$235.00
- QC/T 1040-2016Electric fuel pumps for motorcycles and mopeds$325.00
- QC/T 1041-2016Technical requirements for fuel evaporative emission control systems (devices) of motorcycles and mopeds$175.00
- QC/T 1041-2026Control system of fuel evaporative pollutants from Motorcycles with petrol engine$165.00
- QC/T 1042-2016Test method for vibration comfort of motorcycles and mopeds$235.00
- QC/T 1043-2016Nylon tubing for automotive fuel systems$115.00
- QC/T 1044-2016Automotive floor mats$235.00
- QC/T 1045-2016Heat-shrinkable tubing for protection of automotive pipes$135.00
- QC/T 1046-2016Performance requirements and bench test methods for rear-mounted hydrodynamic retarders of commercial vehicles$285.00
- QC/T 1047-2016Plastic seats for city buses$205.00
- QC/T 1048-2016Emergency hammers for buses$135.00
- QC/T 1049-2016Technical requirements and test methods for matching of automotive rack and pinion hydraulic power steering systems$235.00
- QC/T 1050-2016Technical requirements and test methods for dual mass flywheels of passenger cars$235.00
- QC/T 1050-2025Automobile dual mass flywheel assembly$460.00
- QC/T 1051-2017Driver training vehicles$175.00
- QC/T 1052-2017Communication vehicles$235.00
- QC/T 1053-2017Concrete spraying vehicles$295.00
- QC/T 1054-2017Tunnel cleaning vehicles$315.00
- QC/T 1055-2017Drainage rescue vehicles$265.00
- QC/T 1056-2017Technical requirements and test methods for automotive dual clutch transmission assemblies$295.00
- QC/T 1057-2017Anti-skid chains for automobiles$225.00
- QC/T 1058-2017Fingerprint recognition devices for automobiles$125.00
- QC/T 1059-2017Truck cabs - Torsion bar tilting and locking mechanisms$125.00
- QC/T 1060-2017Hexalobular flange bolts for automobiles$125.00
- QC/T 1061-2017Road tank vehicles for light fuel oil - Overfill prevention systems$205.00
- QC/T 1062-2017Road tank vehicles for light fuel oil - Unloading valves$235.00
- QC/T 1063-2017Road tank vehicles for light fuel oil - Vapour recovery components$265.00
- QC/T 1064-2017Road tanker for flammable liquid goods transportation -- Pressure and vacuum breather vent$265.00
- QC/T 1065-2017Road tank vehicles for flammable liquid dangerous goods - Manhole covers$265.00
- QC/T 1066-2017Performance requirements and bench test methods for automotive parking brake cable assemblies$315.00
- QC/T 1067.1-2017Connectors for automotive wire harnesses and electrical equipment - Part 1: Definitions, test methods and general performance requirements$475.00
- QC/T 1067.2-2017Connectors for automotive wire harnesses and electrical equipment - Part 2: Types and dimensions of male terminals$125.00
- QC/T 1067.3-2017Connectors for automotive wire harnesses and electrical equipment - Part 3: Types, dimensions and particular requirements of wire terminals$125.00
- QC/T 1067.3-2026Connector used in automobile wire harness and electrical device - Part 3: Type, dimension, test method and requirement of the ring terminal and battery terminal$485.00
- QC/T 1067.4-2023Connectors for automotive wiring harnesses and electrical equipment - Part 4: Types and dimensions of equipment connectors (plugs)$195.00
- QC/T 1067.5-2023Connectors for automotive wiring harnesses and electrical equipment - Part 5: Types and dimensions of equipment connectors (sockets)$390.00
- QC/T 1068-2017Asynchronous drive motor systems for electric vehicles$125.00
- QC/T 1069-2017Permanent magnet synchronous drive motor systems for electric vehicles$125.00
- QC/T 1070-2017Technical specifications for remanufactured automotive components - Cylinder block assemblies$125.00
- QC/T 1071-2017Steady flow test method for port characteristics of cylinder heads of automotive engines$315.00
- QC/T 1072-2017Automotive gear position sensors$155.00
- QC/T 1073.1-2017Automotive acceleration sensors - Part 1: Linear acceleration sensors$105.00
- QC/T 1074-2017Technical specifications for remanufactured automotive components - Cylinder heads$105.00
- QC/T 1075-2017Technical specifications for metallic honeycomb substrates for exhaust catalytic converters$125.00
- QC/T 1075-2026Honeycomb metal substrate for exhaust catalytic converter and electric heating units$225.00
- QC/T 1076-2017Performance requirements and test methods for continuously variable transmissions (CVT)$125.00
- QC/T 1077-2017Terms and definitions for classification of automotive automatic transmissions$105.00
- QC/T 1078-2017Advertising vehicles$205.00
- QC/T 1079-2017Suction and pressure delivery tankers$235.00
- QC/T 1080-2017Science popularization vehicles$145.00
- QC/T 1081-2017Automotive electric power steering gear$125.00
- QC/T 1082-2017Electric motors for automotive electric power steering$125.00
- QC/T 1083-2017Controllers for automotive electric power steering$95.00
- QC/T 1084-2017Sensors for automotive electric power steering$105.00
- QC/T 1085-2017X-ray inspection of light alloy motorcycle wheels$205.00
- QC/T 1086-2017Specifications of range extender for electrical vehicles$125.00
- QC/T 1086-2026Specifications and test methods for range extender of electric vehicles$360.00
- QC/T 1087-2017Specifications of city battery electric sanitation vehicles$145.00
- QC/T 1088-2017Specifications for charge-discharge motor controllers of electric vehicles$125.00
- QC/T 1089-2017Requirements and test methods for regenerative braking system in electric vehicles$150.00
- QC/T 1090-2017Specifications of sealing gaskets for automotive engines$145.00
- QC/T 1091-2017Specifications for air purifiers for buses$235.00
- QC/T 1091-2023Air Cleaner for Passenger coach$390.00
- QC/T 1092-2018Static stiffness test method for 15° drop centre steel wheels of commercial vehicles$125.00
- QC/T 1093-2018Side door impact beams for passenger cars$125.00
- QC/T 1094-2018General specification of lithium ion batteries for motorcycle starting$235.00
- QC/T 1095-2018Performance requirements and bench test methods for automotive auxiliary vacuum pumps$225.00
- QC/T 1096-2018Bench test methods for fatigue life of torsion beam rear axles of passenger cars$175.00
- QC/T 1097-2018Bench test methods for fatigue life of front axle horizontal modules of passenger cars$225.00
- QC/T 1098-2018Technical specifications for powder metallurgy hubs of automotive clutches$105.00
- QC/T 1099-2018Specifications for collapsible spacers of automotive final drive assemblies$145.00
- QC/T 1100-2019Liquid asphalt tank truck$284.00
- QC/T 1101-2019Electric heaters for electric vehicles$150.00
- QC/T 1102-2019Power sliding door systems for automobiles$210.00
- QC/T 1103-201912-point head heat-resistant lock nuts$90.00
- QC/T 1104-201912-point head heat-resistant bolts$90.00
- QC/T 1105-2019Performance requirements and test methods for earth bolts$135.00
- QC/T 1106-2019Restraint barriers for bus seats$150.00
- QC/T 1107-2019Compression refuse collection vehicles$270.00
- QC/T 1108-2019Pneumatic solenoid valves for commercial vehicles$270.00
- QC/T 1109-2019Leveling motors for automotive front lighting$270.00
- QC/T 1110-2019Fuel heating devices for automotive diesel engines$225.00
- QC/T 1111-2019Commercial vehicles - Light alloy wheels - 30° impact test method$165.00
- QC/T 1112-2019Passenger cars - Biaxial fatigue test method for wheels$210.00
- QC/T 1113-2019Technical requirements and test methods for quick connectors of automotive air braking systems$330.00
- QC/T 1114-2019Specifications and bench test methods for automotive automated manual transmission (AMT) assemblies$180.00
- QC/T 1115-2019Technical requirements and test methods for automatic transmissions (AT)$240.00
- QC/T 1116-2019Dust suppression vehicles$270.00
- QC/T 1117-2019Vehicles for harmless transport of livestock and poultry$240.00
- QC/T 1118-2019Technical specifications for swap bodies of van-type vehicles$240.00
- QC/T 1119-2019Road vehicles - Safety glazing materials - Vocabulary$390.00
- QC/T 1120-2019Dimensions of push-to-connect fittings for automotive air braking systems$390.00
- QC/T 1121-2019Plastic fuel tanks for vehicles$270.00
- QC/T 1122-2019Technical specifications of electric water pump for vehicle engine$270.00
- QC/T 1123-2019Automobile tyre inflators$210.00
- QC/T 1124-2019Durability test method for leveling devices of automotive adaptive front lighting systems$285.00
- QC/T 1125-2019Terms and definitions of automotive clutch systems$195.00
- QC/T 1126-2019Terms and definitions of automotive drive axles$195.00
- QC/T 1127-2019Technical specifications and test methods for aluminium alloy control arm assemblies of passenger car MacPherson suspensions$195.00
- QC/T 1128-2019Automotive cameras$540.00
- QC/T 1129-2019Rear crash energy-absorbing devices for special vehicles$195.00
- QC/T 1130-2021Fuel consumption test methods for methanol vehicles$150.00
- QC/T 1131-2020Test methods for polycyclic aromatic hydrocarbons in automotive materials$360.00
- QC/T 1132-2020Noise measurement methods for electric powertrains of electric vehicles$240.00
- QC/T 1133-2020Safety elements of air filters for commercial vehicles$150.00
- QC/T 1134-2020Test method for water separation of engine intake air$195.00
- QC/T 1135-2020Coolant filter for automobile engine$180.00
- QC/T 1136-2020Environmental test requirements and test methods of insulated-gate bipolar transistors (IGBT) module for electric vehicles$255.00
- QC/T 1137-2020Encapsulated glazing for road vehicles$270.00
- QC/T 1138-2020Sliding window glazing assembly for road vehicles$270.00
- QC/T 1139-2020Technical specifications for remanufactured automotive components - Connecting rods$195.00
- QC/T 1140-2020Technical specifications for remanufactured automotive components - Crankshafts$185.00
- QC/T 1141-2020Automobile clutch release bearing assemblies$195.00
- QC/T 1142-2021Test method for natural frequency of automobile wheels$120.00
- QC/T 1143-2021Test method for static bending stiffness of automobile wheels$150.00
- QC/T 1144-2021Oxygen sensor for motorcycles and mopeds$120.00
- QC/T 1145-2021Technical specifications for diesel/methanol dual-fuel engines$270.00
- QC/T 1146-2021Technical specifications for methanol fuel engines$210.00
- QC/T 1147-2021Electronic silicon oil fan clutch for vehicle engine$345.00
- QC/T 1148-2021Power tailgate system for automobile$210.00
- QC/T 1149-2021Special vehicles for transporting large indivisible loads$240.00
- QC/T 1150-2021Technical specifications for fuel systems of methanol vehicles$240.00
- QC/T 1151-2021Technical specifications for methanol fuel vehicles$180.00
- QC/T 1152-2021Specifications for DC/DC converters of electric motorcycles and electric mopeds$240.00
- QC/T 1153-2021Axial force test of bolts in automotive threaded joints - Ultrasonic piezoelectric ceramic method$175.00
- QC/T 1154-2021Commutators for automotive micromotors$225.00
- QC/T 1155-2021USB power adapters for automobiles$375.00
- QC/T 1156-2021Recycling of traction batteries for electric vehicles - Specification for cell dismantling$165.00
- QC/T 1157-2022Calculation method of comprehensive energy consumption per unit output of automobile products$150.00
- QC/T 1158-2022Calculation method of comprehensive water consumption per unit output of automobile products$150.00
- QC/T 1159-2022Guidelines on evaluation of automobile industry green supply chain management$225.00
- QC/T 1160-2022Guidelines for evaluation of green factories for whole vehicle manufacturing in the automobile industry$315.00
- QC/T 1161-2022Technical specification for green-design product assessment - Automobiles$270.00
- QC/T 1162-2022Honeycomb sandwich structure products for automobile exterior trim parts$165.00
- QC/T 1163-2022Automotive diesel engines - Reductant filters for selective catalytic reduction (SCR) systems$225.00
- QC/T 1164-2022Natural gas filters for automobiles$255.00
- QC/T 1165-2022Air filters for carbon canisters of gasoline passenger cars$210.00
- QC/T 1166-2022Streaming rear-view mirror for vehicle$315.00
- QC/T 1167-2022Service brake dynamometer squeal noise test methods for passenger cars$435.00
- QC/T 1168-2022Performance requirements and bench test methods for automotive electric air compressors$165.00
- QC/T 1169-2022Liquid crystal instruments for automobiles$315.00
- QC/T 1170-2022Functional films for automotive glass$480.00
- QC/T 1171-2022Automotive paint protection film$360.00
- QC/T 1172-2022Performance requirements and bench test methods for exhaust silencers of automotive air braking components$180.00
- QC/T 1173-2022Road vehicles - Spark-plugs application test methods$150.00
- QC/T 1174-2022High voltage fuse of electric vehicles$390.00
- QC/T 1175-2022High voltage contactor for electric vehicles$435.00
- QC/T 1176-2022Evaporator for automotive air conditioning$150.00
- QC/T 1177-2022Condenser for automotive air conditioning$150.00
- QC/T 1178-2022Motor vehicles and towed vehicles - Pneumatic braking systems - Tapped holes and pipe fittings$105.00
- QC/T 1179-2022Specifications for automobile wheel bolts$70.00
- QC/T 1180-2023Power distribution vehicles$300.00
- QC/T 1181-2023Coaxial tube internal heat exchangers for automotive air conditioning$300.00
- QC/T 1182-2023Aluminium alloy plate heat exchangers for automotive air conditioning$300.00
- QC/T 1183-2023Terms and definitions of automobile aerodynamics$420.00
- QC/T 1184-2023Technical specifications for remanufactured automotive components - Decorative bumpers$240.00
- QC/T 1185-2023Remanufacturing of automotive components - Technical specification for thermal spray repair$195.00
- QC/T 1186-2023Technical specifications for remanufactured automotive components - Turbochargers$210.00
- QC/T 1187-2023Manikins for automobile safety belt tests$465.00
- QC/T 1188-2023Technical specifications for remanufactured automotive components - Aluminium alloy body panels$210.00
- QC/T 1189-2023Bumpers for passenger cars$255.00
- QC/T 1190-2023Clutch slave cylinders for automobiles$210.00
- QC/T 1191-2023Steering gear racks for passenger cars$375.00
- QC/T 1192-2023Ambient light sensors for automobiles$330.00
- QC/T 1193-2023Automotive antenna amplifiers$315.00
- QC/T 1194-2023Automotive rain sensors$285.00
- QC/T 1195-2023Air Flow Sensors for Automobiles$270.00
- QC/T 1196-2023car refrigerator$465.00
- QC/T 1197-2023Performance requirements and bench test methods for condensers of automotive air braking systems$300.00
- QC/T 1198-2023Cable assembly with function box of conductive charging for electric vehicles$300.00
- QC/T 1199-2023Integrated AC standard socket-outlet of conductive charging for electric vehicles$195.00
- QC/T 1200-2023Cable assembly for conducting charging of electric vehicles with a charger$530.00
- QC/T 1201.1-2023Interchangeability of On Board Power Exchange System for electric commercial vehicle$485.00
- QC/T 1201.2-2023Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 2: Battery swap cooling interface$240.00
- QC/T 1201.3-2023Compatibility of on-board battery swap system for battery electric commercial vehicles-Part 3: Battery swap mechanism$390.00
- QC/T 1201.4-2023Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 4: Swappable battery system$240.00
- QC/T 1201.5-2023Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 5: Communication between the vehicle and the battery system$800.00
- QC/T 1202-2024Wet dual clutch assembly for automatic transmission of passenger vehicles$210.00
- QC/T 1203-2024Height control valves for automobile air suspension$335.00
- QC/T 1204.2-2024Interchangeability of on-board battery swap systems for battery electric passenger vehicles - Part 2: Battery swap cooling interface$195.00
- QC/T 1204.3-2024Interchangeability of on-board battery swap systems for battery electric passenger vehicles - Part 3: Battery swap mechanism$180.00
- QC/T 1204.4-2024Compatibility of on-board battery swap system for battery electric passenger vehicles - Part 4: Battery swap pack$195.00
- QC/T 1204.5-2024Interchangeability of on-board battery swap systems for battery electric passenger vehicles - Part 5: Communication between vehicle and battery pack$330.00
- QC/T 1205.4-2024General battery swap platform for battery electric passenger vehicles - Part 4: Communication between battery pack and facilities$315.00
- QC/T 1206.1-2024Thermal management systems for electric vehicle traction batteries - Part 1: General requirements$195.00
- QC/T 1206.2-2024Thermal management systems for electric vehicle traction batteries - Part 2: Liquid cooling systems$135.00
- QC/T 1206.3-2026Thermal management system for electric vehicle traction battery - Part 3: Air cooling system$210.00
- QC/T 1206.4-2026Thermal management system for electric vehicle traction battery - Part 4: Heater$210.00
- QC/T 1206.5-2026Thermal management system for electric vehicle traction battery - Part 5: Direct cooling and heating system$225.00
- QC/T 1207-2024Air compressors for fuel cell engines$525.00
- QC/T 1208-2024Hydrogen recirculation pumps for fuel cell engines$450.00
- QC/T 1209-2024Terms and definitions of noise and vibration (NVH) for motor vehicles$455.00
- QC/T 1210-2024Anti-pinch systems for automobiles$195.00
- QC/T 1211-2024Passenger car door inner opening handle assembly$195.00
- QC/T 1212-2024Individually cast high-strength alloy cast iron piston rings for automobiles - Metallographic examination$135.00
- QC/T 1213-2024Inspection of plasma-sprayed coatings on automobile piston rings$195.00
- QC/T 1214-2024Determination of nitrided layer depth and hardness of steel piston rings for automobiles and motorcycles$120.00
- QC/T 1215-2024Automotive engines - Wear-resistant ring carrier inserts for cast aluminium pistons$195.00
- QC/T 1217-2024Automotive wired high-speed media transmission - Multi-gigabit full-duplex system - Technical requirements and test methods$1,340.00
- QC/T 1218-2025Automatic dump semi-trailer$405.00
- QC/T 1219-2025Composite integrated pedal for autotruck$255.00
- QC/T 1220-2025Hydraulic hose assembly for commercial vehicle clutch$210.00
- QC/T 1221-2025Modified polypropylene door outer panels for automobile$165.00
- QC/T 1222.1-2025Automobile engines - Inspection method for surface treatment of piston rings - Part 1: Chromium based ceramic composite coating$165.00
- QC/T 1222.2-2025Automobile engines - Inspection method for surface treatment of piston rings - Part 2: PVD coating$210.00
- QC/T 1223-2025Special requirements for the heavy commercial vehicle and combination vehicles fitted with lift axle$85.00
- QC/T 1224-2025Method for judging spring effect of commercial vehicle equipped with air suspension$255.00
- QC/T 1225-2025Curtain side semi-trailer$405.00
- QC/T 1226-2025Road vehicles - Shielded balanced cable with a specified bandwidth up to 10 GHz$530.00
- QC/T 1227-2025Technical specifications for automobile bevel box$180.00
- QC/T 1228-2025Test method for automotive organic light emitting diode (OLED) light sources$465.00
- QC/T 1229-2025Fuel cell electric vehicles - Refuelling communication protocol$300.00
- QC/T 1230-2025Wheel side drive axle of electric bus$405.00
- QC/T 1231-2025Solenoid Valve Type Continuous Damping Control Shock Absorber Assembly for Passenger Vehicle$433.00
- QC/T 1232-2025Leaf spring Trailing arm assembly for commercial vehicle air suspension$433.00
- QC/T 1233-2025Wind buffeting measurement method for motor vehicle$480.00
- QC/T 1234-2025Leisure accommodation vehicles - Requirements and evaluation methods forodor, volatile organic compounds, aldehydes and ketones in vehicle$433.00
- QC/T 1235-2025Automotive millimeter-wave radar performance requirements and test methods$1,210.00
- QC/T 1236-2025Cooling pump for fuel cell systems$732.00
- QC/T 1237-2025Hydrogen injector for fuel cell systems$460.00
- QC/T 1238-2025Air filter for fuel cell system$460.00
- QC/T 1239-2025Venting test methods oftraction battery for electric vehicles$240.00
- QC/T 1240-2025Peak power test methods for traction battery ofelectric vehicle$433.00
- QC/T 1241-2025Specifications and test methods for hybrid electric drive system of electric vehicles$480.00
- QC/T 1242.1-2025Interoperability of On-board Battery Swapping Systems for Pure Electric Passenger Vehicles - Part 1: Battery Swapping Electrical Interface$480.00
- QC/T 1243.1-2025Common platform of battery swap for battery electric passenger vehicles - Part 1: Vehicle$433.00
- QC/T 1243.2-2025Common platform of battery swap for battery electric passenger vehicles - Part 2: Battery pack$210.00
- QC/T 1243.3-2025Common platform of battery swap for battery electric passenger vehicles - Part 3: Communication between Vehicles and Infrastructure$628.00
- QC/T 1246-2025Greenhouse Gas Emission Accounting And Reporting Requirements - Power Battery Manufacturing Enterprises$575.00
- QC/T 1247-2025Greenhouse gases - Quantification methods and requirements for product carbon footprint - Traction batteries of vehicles$940.00
- QC/T 1248-2025Greenhouse Gases – Quantitative Methods and Requirements of Product Carbon Footprint – Road Vehicle Products$480.00
- QC/T 1249-2025Greenhouse gases - Quantification methods and requirements for product carbon footprint - Passenger cars$1,210.00
- QC/T 1250-2025Heavy duty hose clamps ofelastic compression type for automobile$321.00
- QC/T 1251-2025Heavy duty hose clamps for automobile$321.00
- QC/T 1252-2025Heat resistant 12-point head nuts for automobile$134.00
- QC/T 1253-2025Heat resistant double end studs for automobile$321.00
- QC/T 1254-2025Round weld nuts for vehicle, type B$150.00
- QC/T 1255-2025Square nut for automobile$150.00
- QC/T 1256-2025Hexagon bolts with flange for automobile$210.00
- QC/T 1257-2025Hexagon flange removing scraps and grounding bolt$321.00
- QC/T 1258-2025Hose clamps with worm gear drive for Automobile, shape Smart Seal$150.00
- QC/T 1259-2025Hose clamps with worm gear drive for Automobile, shape Flex Gear$321.00
- QC/T 1260-2025Steering wheel heating device of automobile$460.00
- QC/T 1261-2025Automotive transmission control unit$420.00
- QC/T 1262-2025Bus service door emergency control$433.00
- QC/T 1263-2025Automobile engines - Round wire retaining rings for piston pin bore$433.00
- QC/T 1264-2025Technical rquirements and testing methods for analog front end chip of battery management system in electric vehicles$732.00
- QC/T 1265-2025Technical requirements and test methods of power drive chip for electric vehicles$300.00
- QC/T 1266-2025Fuel cell electric vehicles - Specifications for online monitoring of onboard hydrogen systems$433.00
- QC/T 1267-2025Evaluation Method for Carbon Emission Reduction of Electric Vehicle in Driving Phase$360.00
- QC/T 1268-2026Hydralic-type tilting and locking system for the cab of vehicles$285.00
- QC/T 1269-2026Specifications and test methods of drive motor controller for electric vehicles$315.00
- QC/T 1270-2026Electronic toll collection - On board unit integrated circuits - Technical requirements and testing methods$485.00
- QC/T 1271-2026Positive crankcase ventilation valve for automotive engines$165.00
- QC/T 1273-2026Technical requirements and bench test method of torsion bar spring for automobile suspension$255.00
- QC/T 1274-2026Road vehicle - Carbon emissions accounting and reporting for enterprises - End-of-life vehicles collecting and dismantling enterprises$515.00
- QC/T 1275-2026Carbon footprint of road vehicle products - Product category rules - Engine$545.00
- QC/T 1276-2026Road Vehicle - Carbon emissions accounting and reporting for enterprises - Engine manufacturing enterprise$575.00
- QC/T 1277-2026Technical requirements and test methods for vehicle security chip$530.00
- QC/T 1278-2026Technical requirements and testing methods of driving automation computing chip for vehicle$785.00
- QC/T 1279-2026Intelligent manufacturing of motor vehicle - - Function requirements for collaborative development platform$210.00
- QC/T 1280.1-2026Intelligent manufacturing of motor vehicle - Mass customization - Part 1: General requirements$165.00
- QC/T 1281-2026Limit deviations of un-toleranced dimensions for flat-forged steel die forgings for automotive applications$225.00