Valid

QC/T 886-2011Arc welding pins (English PDF)

电弧焊销

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 886-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

QC/T 886-2011 is the English-translated version of 电弧焊销.

QC/T 886-2011 is a recommended standard of the Chinese automotive industry covering arc welding pins, the studs fixed to a vehicle part by arc welding. It fixes their type and dimensions and the technical conditions they must meet.

The sizes in its scope are those with a shank diameter d from 3 mm to 8 mm. GB/T 90.1, GB/T 90.2, QC/T 326 and QC/T 625 are quoted, and the document is filed at T31 in the Chinese classification and 43.040 in the international one. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — QC/T 886-2011

National Standard of the People's Republic of China

ICS
43.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 4 Technical requirements
  • 5 Test Methods
  • 5.1 Protocol stack
  • 5.2 Node state
  • 5.3 Transmission rate
  • 5.4 Connectivity
  • 5.5 Bit error rate
  • 5.6 Wiring harness fault diagnosis
  • 5.7 Electrical indexes
  • 6 Inspection Rules
  • 6.1 Test environment
  • 7 Signs, documents, packaging, transportation and storage
  • 8 Inspection report
  • 9 Marks, packaging

1 Foreword

QC/T 886-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese automotive industry covering arc welding pins, the studs fixed to a vehicle part by arc welding. It fixes their type and dimensions and the technical conditions they must meet. The sizes in its scope are those with a shank diameter d from 3 mm to 8 mm. GB/T 90.1, GB/T 90.2, QC/T 326 and QC/T 625 are quoted, and the document is filed at T31 in the Chinese classification and 43.040 in the international one.

QC/T 886-2011 falls under ICS 43.040, in the field of road vehicle engineering.

This catalogue holds 396 other QC/T standards in that field.

In this catalogue, QC/T standards carry edition years from 1991 to 2026.

3 Normative references

GB/T 90.1

GB/T 90.2

QC/T 326

QC/T 625

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

QC/T 857-2023 — Weld studs

QC/T 869-2022 — Short-cycle drawn arc welding studs

QC/T 871-2022 — Double end studs bm=2d

QC/T 878-2011 — Hexalobular socket pan head tapping screws for plastics

QC/T 877-2011 — Hexagon flange head tapping screws for plastics

QC/T 876-2011 — Hexagon collar head tapping screws for plastics

6 Classification and status

International classification (ICS): 43.040

Chinese Standard Classification (CCS): T 31

Prefix QC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download QC/T 886-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

QC/T 886-2011

$105.00