Valid

GB/T 41984-2022Procedure method for arc stud welding (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (93 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41984-2022 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

October 12, 2022

Implementation date

October 12, 2022

Scope

GB/T 41984-2022 (Procedure method for arc stud welding) is available as an English-translated PDF.

GB/T 41984-2022 is the Chinese standard "Procedure method for arc stud welding".

Its scope clause reads: This document describes the method of arc stud welding and specifies the welding technique review, personnel and equipment, welding procedure plan, welding procedure specification Relevant requirements such as procedures, welding procedure qualification, test inspection and acceptance criteria. This document applies to arc stud welding of metallic materials.

Found what you need?

Document preview — GB/T 41984-2022

National Standard of the People's Republic of China

ICS: 25.160.10
Classification: J 33

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Symbols and abbreviations
5 Technical Review
6 welder
7 equipment
8 Process scheme
9 Welding procedure specification
10 Welding procedure qualification
11 Test and inspection
12 Acceptance Criteria
13 Process measures
14 Process Control
Appendix A (informative) Arc stud welding process
Appendix B (Normative) Quality Requirements for Arc Stud Welding
Appendix C (Informative) Manufacturer's Welding Procedure Specification (WPS)
Appendix D (informative) Welding procedure qualification report format
Appendix E (Informative) Production Test Results Report
Appendix F (informative) Welding procedure qualification report format
Appendix G (Informative) Production Test Results Report
Appendix H (Informative) Production Supervision Record Example

1 Scope

This document describes the method of arc stud welding and specifies the welding technique review, personnel and equipment, welding procedure plan, welding procedure specification

Relevant requirements such as procedures, welding procedure qualification, test inspection and acceptance criteria.

This document applies to arc stud welding of metallic materials.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references

For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 902.2 Welding studs for arc stud welding (GB/T 902.2-2010, ISO 13918.2008, MOD)

GB/T 3323.1 Radiographic testing for non-destructive testing of welds - Part 1.X-ray and gamma-ray film techniques (GB/T 3323.1-

2019, ISO 17636-1.2013, MOD)

GB/T 3323.2 Radiographic testing for non-destructive testing of welds - Part 2.X and gamma ray techniques using digital detectors (GB/T 3323.2-2019, ISO 17636-2.2013, MOD)

GB/T 3375 Welding Terminology

GB/T 5185 Welding and related process codes (GB/T 5185-2005, ISO 4063.1998, IDT)

GB/T 12467.1 Quality requirements for fusion welding of metallic materials - Part 1.Selection criteria for corresponding grades of quality requirements (GB/T 12467.1-

2009, ISO 3834-1.2005, IDT)

GB/T 12467.2 Quality requirements for fusion welding of metal materials Part 2.Complete quality requirements (GB/T 12467.2-2009, ISO 3834-2.

2005, IDT)

GB/T 12467.3 Quality requirements for fusion welding of metal materials Part 3.General quality requirements (GB/T 12467.3-2009, ISO 3834-3.

2005, IDT)

GB/T 12467.4 Quality requirements for fusion welding of metallic materials Part 4.Basic quality requirements (GB/T 12467.4-2009, ISO 3834-4.

2005, IDT)

GB/T 15169 Steel Fusion Welding Welder Skills Assessment (GB/T 15169-2003, ISO 9606-1.2002, IDT)

GB/T 15579.1 Arc welding equipment Part 1.Welding power supply (GB/T 15579.1-2013, IEC 60974-1.2005, IDT)

GB/T 16672 Definition of inclination and rotation angle of welding seam working position (GB/T 16672-1996, ISO 6947.1990, IDT)

GB/T 19419 Welding Management Tasks and Responsibilities (GB/T 19419-2003, ISO 14731.1997, IDT)

GB/T 19805 Skills Assessment of Welding Operators (GB/T 19805-2005, ISO 14732.1998, IDT)

GB/T 19866 Welding procedure specification and general principles for qualification (GB/T 19866-2005, ISO 15607.2003, IDT)

GB/T 19868.2 Procedure qualification based on welding experience (GB/T 19868.2-2005, ISO 15611.2003, IDT)

GB/T 19868.4 Procedure qualification based on pre-production welding test (GB/T 19868.4-2005, ISO 15613.2004, IDT)

GB/T 24598 Welder skills assessment for fusion welding of aluminum and aluminum alloys (GB/T 24598-2009, ISO 9606-2.2004, MOD)

GB/T 39255 Shielding gas for welding and cutting (GB/T 39255-2020, ISO 14175.2008, MOD) system)

GB/T 40801 | GB/T 41110 | GB/T 41112 | GB/T 41979.2 | GB/T 41979.1 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 93 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 13918.2008 · ISO 17636 · ISO 4063.1998 · ISO 3834 · ISO 9606 · IEC 60974 · ISO 6947.1990 · ISO 14731.1997 · ISO 14732.1998 · ISO 15607.2003 · ISO 15611.2003 · ISO 15613.2004 · ISO 14175.2008

How to Download GB/T 41984-2022

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.