QC/T 901-1998Evaluation method for quality inspection of automotive engine products (English PDF)
汽车发动机产品质量检验评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 901-1998 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 23, 1998
Implementation date
March 15, 1998
Scope
QC/T 901-1998 is the English-translated version of 汽车发动机产品质量检验评定方法.
QC/T 901-1998 is the Chinese automotive industry standard covering evaluation method for quality inspection of automotive engine products. It was issued on 23 February 1998 and has been in force since 15 March 1998, replacing QCN 29008.14-1991.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1998 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 901-1998
National Standard of the People's Republic of China
- Replacing
- QCN 29008.14-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 4.1 Arrangement form
- 5 Test Methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection Rules
- 6.1 Test environment
- 7 Signs, documents, packaging, transportation and storage
- 8 Inspection report
- 9 Marks, packaging
1 Foreword
QC/T 901-1998 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 February 1998 and has been in force since 15 March 1998.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
QC/T 901-1998 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
QC/T 901-2026 (later edition)
Standards on related subjects:
QC/T 471-2025 — Automotive diesel engine
QC/T 631-2025 — Exhaust muffler assembly of automotive
GB/T 18297-2024 — Performance test code for road vehicle engines
5 Classification and status
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of QC/T 901
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 901-1998 | Evaluation method for quality inspection of automotive engine products | current edition | Current |
| QCN 29008.14-1991 | Evaluation method for quality inspection of automotive engine products | previous edition | Superseded |
This page sells the current edition, QC/T 901-1998. Earlier editions are listed for reference only.
How to Download QC/T 901-1998
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 901-1998
$409.00