Valid

QC/T 882-2011Split clamps (English PDF)

开口夹

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 882-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

QC/T 882-2011 is the English-translated version of 开口夹.

Split clamps for motor vehicles are dealt with in QC/T 882-2011, a recommended standard of the Chinese automobile industry. The text sets the types and sizes of the open clip and the technical conditions that go with them.

Such clamps are fixed to the frame, the body and other sheet metal parts, where they hold pipes, wiring harnesses and control cables in place. The standard is classified T31 in China and 43.040 internationally, and it was issued by the Ministry of Industry and Information Technology.

It quotes GB/T 90.1, GB/T 90.2, GB/T 700, QC/T 326 and QC/T 625. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — QC/T 882-2011

National Standard of the People's Republic of China

ICS
43.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 4 Technical requirements
  • 5 Test Methods
  • 5.1 Protocol stack
  • 5.2 Node state
  • 5.3 Transmission rate
  • 5.4 Connectivity
  • 5.5 Bit error rate
  • 5.6 Wiring harness fault diagnosis
  • 5.7 Electrical indexes
  • 6 Inspection Rules
  • 6.1 Test environment
  • 7 Signs, documents, packaging, transportation and storage
  • 8 Inspection report
  • 9 Marks, packaging

1 Foreword

QC/T 882-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

Split clamps for motor vehicles are dealt with in QC/T 882-2011, a recommended standard of the Chinese automobile industry. The text sets the types and sizes of the open clip and the technical conditions that go with them. Such clamps are fixed to the frame, the body and other sheet metal parts, where they hold pipes, wiring harnesses and control cables in place. The standard is classified T31 in China and 43.040 internationally, andIt quotes GB/T 90.1, GB/T 90.2, GB/T 700, QC/T 326 and QC/T 625.

QC/T 882-2011 falls under ICS 43.040, in the field of road vehicle engineering.

This catalogue holds 396 other QC/T standards in that field.

In this catalogue, QC/T standards carry edition years from 1991 to 2026.

3 Normative references

GB/T 90.1

GB/T 90.2

GB/T 700

QC/T 326

QC/T 625

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

QC/T 857-2023 — Weld studs

QC/T 869-2022 — Short-cycle drawn arc welding studs

QC/T 871-2022 — Double end studs bm=2d

QC/T 874-2011 — Hexalobular socket countersunk head self drilling screws with tapping screw thread

QC/T 873-2011 — Hexalobular socket raised countersunk (oval) head self drilling screws with tapping screw thread

QC/T 872-2011 — Hexagon flange weld nuts

6 Classification and status

International classification (ICS): 43.040

Chinese Standard Classification (CCS): T 31

Prefix QC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

How to Download QC/T 882-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

QC/T 882-2011

$135.00