Valid

QC/T 932-2012Emergency shut-off valves for road tank vehicles transporting dangerous liquid goods (English PDF)

道路运输液体危险货物罐式车辆紧急切断阀

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 932-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 28, 2012

Implementation date

June 1, 2013

Scope

QC/T 932-2012 is the English-translated version of 道路运输液体危险货物罐式车辆紧急切断阀.

QC/T 932-2012 is the Chinese standard "Emergency shut-off valves for road tank vehicles transporting dangerous liquid goods". Its scope clause reads: This Standard stipulates the terms and definitions, requirements, test methods, inspection rules and markings of the emergency shutoff valve of road tanker for dangerous liquid goods transportation.

This Standard is applicable to the transportation of liquid petroleum products and other dangerous liquids which comply with the Class III dangerous liquid in GB 6944 “Classification and Code of Dangerous Goods”, including petroleum whose steam pressure is not higher than 110kPa at 50 °C, but excluding the emergency shutoff valve of road tanker for liquid desensitized explosives, poisons and corrosives. Its clauses include inspection rules.

Found what you need?

Document preview — QC/T 932-2012

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword1
  • 1 Scope2
  • 2 Normative References2
  • 3 Terms and definitions3
  • 4 Requirements4
  • 5 Test method9
  • 6 Inspection rules11
  • 7 Marking13
  • between bottom valve and the fluid pipeline (square shape)14
  • Annex D (Informative) The testing device of the cracking safety15
  • Annex E (Normative) The test position of the cracking safety16
  • References and Original Chinese Documents17

1 Scope

This Standard stipulates the terms and definitions, requirements, test methods, inspection rules and markings of the emergency shutoff valve of road tanker for dangerous liquid goods transportation.

This Standard is applicable to the transportation of liquid petroleum products and other dangerous liquids which comply with the Class III dangerous liquid in GB 6944

“Classification and Code of Dangerous Goods”, including petroleum whose steam pressure is not higher than 110kPa at 50 °C, but excluding the emergency shutoff valve of road tanker for liquid desensitized explosives, poisons and corrosives.

2 Normative References

The articles contained in the following documents have become part of this Standard when they are quoted herein. For the dated documents so quoted, all the modifications (Including all corrections) or revisions made thereafter shall be applicable to this Standard.

GB/T 1239.2-2009 Cold coiled helical spring technical specifications - Part 2:

Compressions spring

GB/T 2828.1-2003 Sampling procedures for inspection by attributea-Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

GB/T 4356 Stainless steel wire rods

GB/T 5218 Alloy spring steel wires

GB/T 13927-2008 Industrial valves - Pressure testing

GB/T 15114 Aluminum alloy die castings

GB/T 15115 Die casting aluminum alloys

JB/T 9092-1999 Valve inspection and testing the experiment pressure is maintained continuously for at least 10min, the valve body of the non-pressure-balance bottom valve shall be in good state.

4.12 Sealing performance of the valve body

Within the designed temperature range, the valve body of the bottom valves (including the operating mechanisms) shall not leak under the specified pressure state for 60s.

4.13 Sealing performance of the valve seats

Within the designed temperature range, under the specified pressure state, after pressurized for 60s - valve clacks, valve seats and surfaces of valve body, etc. shall not have any apparent and visible leakage. The leaking volume shall comply with the requirements in “All Resiliently Sealed Deputy Valve” in Table 4 of JB/T 9092-1999.

4.14 Operability

After the assembly is completed, bottom valve shall be able to turn-on and turn-off quickly through the on-off operating device; no blocking symptoms; and the closing time must not be longer than 2s.

4.15 Service life

After 25,000 times of opening and closing actions without lubricating, bottom valve shall still have good operability and good sealing performance on the valve seats, and pass the sealing performance test on the valve seats.

4.16 Cracking safety

4.16.1

When the valve seat of the bottom valve (sealing mechanical part) is designed, it shall guarantee to be in the wrapping range of the independent barn of installed tank.

4.16.2

The bottom valve shall be designed as shear structure (shear grooving design).

When it suddenly cracks and falls off under the accidental damages like the collision of external shell of the bottom valve, etc., the sealing mechanism in the wrapping range of the independent barn of the installed tank shall be in good state without damage.

4.16.3

The impact energy causing the cracking and falling off of the external shell of the bottom valve due to collision shall not be more than 1000J.

4.16.4

When the external shell of the bottom valve cracks and falls off caused by external force, its sealing mechanism and the installation connection of the bottom seat shall be in good state. The requirements for leaking volume are as follows:

5.7.1

In this test, at least 4 samples shall be taken from each type of products as sample-group for testing.

5.7.2

Testing device:

a) The testing device has a small container of which the side is connected to the connecting-flange of the tested bottom valve, before the test is conducted.

b) The typical device structure parts are shown in Annex D.

c) The impact loading will be successively loaded to the four vertical-central-line-surfaces of the tank-body-installation-connecting-flange and the inspected bottom valve. The specific positions are shown as Annex E.

d) The tested bottom valve shall be installed in the small container of the testing device, and the installation method shall be same as that of installing it in the independent barn of the tank body. During the installation, the screws and sealing gaskets used shall be consistent with the requirements of the instructions provided by the manufacturer.

5.7.3

Test procedures:

a) Install the tested bottom valve (including the operating device) on the protruding edge of installation flange of the testing device;

b) Operate the bottom valve to validate its opening/closing functions;

c) Close the bottom valve and fully-fill the small container with water;

d) Pressurize the small container to at-least 20kPa hydrostatic pressure, and maintain this pressure throughout the testing of the bottom valve;

e) Let stand for 60s and observe it, so as to make sure the bottom valve is in good sealing state;

f) Conduct the impact test according to the specified impact loading;

g) 1 min after implementing the impact test; make sure that the remaining pressure inside the container is higher than atmospheric pressure. Check the leaking volume under the circumstances that the sealing components of the bottom valve and the valve seat are not damaged.

6 Inspection rules

6.1 Out-of-factory items

References and Original Chinese Documents

[1] QC/T 932-2012 Emergency shutoff valve of road tanker for dangerous liquid goods transportation.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download QC/T 932-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

QC/T 932-2012

$125.00