QC/T 998-2015Technical specifications for automotive cabin air filters (English PDF)
汽车空调滤清器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 998-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
QC/T 998-2015 is the English-translated version of 汽车空调滤清器技术条件.
QC/T 998-2015 is the Chinese automotive industry standard covering technical specifications for automotive cabin air filters. It was issued on 30 April 2015 and has been in force since 1 October 2015, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 998-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Requirements
- 4.1 Arrangement form
- 5 Test methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection rules
- 6.1 Test environment
- 7 Marking, packaging, transport and storage
1 Foreword
QC/T 998-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies technical specifications and inspection rules, as well as marking, packaging, transport and storage of cabin air filters. This standard is applicable to particle filters and combination filters for passenger compartment with volume (length × width × height) not less than 0.0008m3.
QC/T 998-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 Normative references
GB 8410 — Flammability of automotive interior materials
GB/T 28957.1 — Road vehicles - Test dust for filter evaluation - Part 1: Silicon dioxide test dust
QC/T 795.1-2007 — Road vehicles - Air filters for passenger compartment - Part 1: Test for particulate filtration
QC/T 795.2-2007 — Road vehicles - Air filters for passenger compartment - Part 2: Test for gaseous filtration
DIN 75201 — Determination of the fogging characteristics of trim materials in the interior of automobiles
ISO 12103 — Road vehicles - Test contaminants for filter evaluation - Part 1: Arizona test dust
VDA 270 — Determination of the odour characteristics of trim materials in motor vehicles
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
QC/T 998-2023 (later edition)
6 Classification and status
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download QC/T 998-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 998-2015
$125.00