QC/T 889-2011Retaining rings for shafts - Type A (English PDF)
A型轴用挡圈
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 889-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
QC/T 889-2011 is the English-translated version of A型轴用挡圈.
Type A retaining rings for shafts are the subject of QC/T 889-2011, a recommended Chinese automotive industry standard. The document gives the type and the dimensions of the ring together with the technical conditions it has to meet.
It applies to type A retaining rings for shaft diameters d from 4 mm to 16 mm. The standards quoted in it are GB/T 90.1, GB/T 90.2, GB/T 959.1, QC/T 326, QC/T 625 and YB/T 5058, and all of them are used alongside it.
Its Chinese classification is T31. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — QC/T 889-2011
National Standard of the People's Republic of China
- ICS
- 43.040
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
QC/T 889-2011 was issued by MIIT on 20 December 2011 and has been in force since 1 July 2012.
2 Scope
Type A retaining rings for shafts are the subject of QC/T 889-2011, a recommended Chinese automotive industry standard. The document gives the type and the dimensions of the ring together with the technical conditions it has to meet. It applies to type A retaining rings for shaft diameters d from 4 mm to 16 mm. The standards quoted in it are GB/T 90.1, GB/T 90.2, GB/T 959.1, QC/T 326, QC/T 625 and YB/T 5058, and all of them are used alongside it. Its Chinese classification is T31.
3 Normative references
QC/T 889-2011 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 90.1
GB/T 90.2
GB/T 959.1
QC/T 326
QC/T 625
YB/T 5058
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 43.040
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 90.1Fasteners - Acceptance inspection
- GB/T 90.2Fasteners--Marking and packaging
- GB/T 959.1Specifications for retaining rings—Circlips
- QC/T 326Numbering rules for automotive standardized parts
- QC/T 625Metallic coatings and chemical conversion coatings for automobiles
- YB/T 5058Cold-Rolled Spring and Tool Steel Strips
Similar standards
How to Download QC/T 889-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 90.1-2023 — Fasteners - Acceptance inspection
GB/T 90.2-2002 — Fasteners--Marking and packaging
GB/T 959.1-2017 — Specifications for retaining rings—Circlips
Secure payment via Stripe
Payments accepted
QC/T 889-2011
$165.00