Search QC/T
112 QC/T standards in English, from QC/T 1282-2026 to QC/T 29117.9-1993, in code order.
- QC/T 1282-2026Test method for adaptive driving beam system (ADB) for motor vehicle$210.00
- QC/T 1283-2026Road operation vehicles Warning lamps$240.00
- QC/T 1284-2026Liquid crystal instrurment for motorcycle$360.00
- QC/T 1285-2026Automotive ignition controller$240.00
- QC/T 1286-2026Automotive Ethernet 100Mbps - Technical requirements and test methods for physical layer interface (PHY) chips$1,730.00
- QC/T 1287-2026Technical Requirements and Test Methods for Automotive Satellite Positioning Chips$650.00
- QC/T 1288-2026General Technical Requirements and Test Methods for Automotive Control Chips$740.00
- QC/T 1289-2026Technical requirements and test methods for automotive infrared thermal imaging chips$680.00
- QC/T 1290-2026Technical requirements and test methods for automotive chassis control chips$905.00
- QC/T 1291-2026Technical requirements and test methods for automotive serializer and deserializer (SerDes) chips$950.00
- QC/T 1292-2026General requirements for automotive microelectromechanical systems (MEMS) lidar$240.00
- QC/T 1293-2026Technical Requirements and Test Methods for Computing Chips in Automotive Intelligent Cockpits$800.00
- QC/T 1294-2026Fault classification and trouble shooting of proton exchange membrane fuel cell engine$225.00
- QC/T 1295.2-2026Universal Battery Swapping Platform for Pure Electric Commercial Vehicles - Part 2: Vehicle-Facility Communication$165.00
- QC/T 29009-1991Cable terminals for automobiles - Technical specifications$55.00
- QC/T 29010-1991Types, dimensions and technical requirements of low-voltage cable terminals for automobiles$85.00
- QC/T 29011-1991Types, dimensions and technical requirements of ignition cable terminals for automobiles$55.00
- QC/T 29013-1991Types, dimensions and technical requirements of battery cable terminals for automobiles$85.00
- QC/T 29015-1991Technical specifications for side panel locking devices of dump trucks$229.00
- QC/T 29017-1991Automotive molded plastic parts without individual tolerance limit the size of the deviation$85.00
- QC/T 29017-2023Limit deviations of untoleranced dimensions for automotive moulded plastic parts$225.00
- QC/T 29018-1991Metallographic inspection of carbonitrided automotive gears$309.00
- QC/T 29018-2025Metallographic examination for automobile carbonitriding gears$240.00
- QC/T 29025-1991Types and dimensions of automotive tube-and-fin radiator cores$265.00
- QC/T 29031-1991Technical specifications for electroplated coatings of automotive engine bearing shells$269.00
- QC/T 29032-1991Clogging alarm sensors for automotive air filters$369.00
- QC/T 29032-2013Clogging alarm sensors for automotive air filters$105.00
- QC/T 29033-1991Bench performance test methods for automotive hydrodynamic transmissions$459.00
- QC/T 29035-1991Technical specifications for automotive leaf springs$229.00
- QC/T 29048-1992Quality grading of telescopic shock absorbers for automotive suspensions$165.00
- QC/T 29049-1992Quality grading of automotive power steering pumps$165.00
- QC/T 29051-1992Quality grading of automotive universal joint cross assemblies$165.00
- QC/T 29052-1992Quality grading of automotive clutch assemblies$165.00
- QC/T 29058-1992Technical specifications for truck cargo bodies$229.00
- QC/T 29059-1992Quality grading of truck cargo bodies$85.00
- QC/T 29061-1992Automotive engine with wax thermostat technical conditions$329.00
- QC/T 29061-2013Technical specifications for wax thermostats of automotive engines$115.00
- QC/T 29062-1992Quality grading of automotive headlamps$165.00
- QC/T 29063-1992Technical specifications for automotive manual transmission assemblies$329.00
- QC/T 29063.1-2011Technical specifications for automotive manual transmission assemblies - Part 1: Mini vehicles$105.00
- QC/T 29064-1992Technical specifications for automotive starters$449.00
- QC/T 29066-1992Quality grading of automotive water-heating heaters$165.00
- QC/T 29067-1992Quality grading of automotive electric windscreen wipers$165.00
- QC/T 29068-1992Quality grading of automotive door locks$165.00
- QC/T 29069-1992Quality grading of automotive gasoline pumps$165.00
- QC/T 29070-1992Quality grading of automotive axle shafts$165.00
- QC/T 29071-1992Quality grading of automotive window regulators$165.00
- QC/T 29073.1-1992Quality grading of automotive special fasteners - Connecting rod bolts and connecting rod nuts$165.00
- QC/T 29073.2-1992Quality grading of automotive special fasteners - Main bearing bolts and cylinder head bolts$165.00
- QC/T 29073.3-1992Quality grading of automotive special fasteners - Wheel bolts and wheel nuts$165.00
- QC/T 29074-1992Quality grading of automotive standard fasteners - Bolts, studs and nuts$165.00
- QC/T 29078-1992Technical specifications for automobile air compressor$105.00
- QC/T 29078-2016Performance requirements and bench test methods for automotive air compressors$125.00
- QC/T 29079-1992Quality grading of automotive hydraulic brake hose assemblies for use with non-petroleum-base brake fluid$165.00
- QC/T 29080-1992Quality grading of automotive air brake hose assemblies$165.00
- QC/T 29081-1992Quality grading of automotive ignition distributors$165.00
- QC/T 29082-1992Technical specifications for automotive propeller shaft assemblies$319.00
- QC/T 29082-2019Specifications and bench test methods for automobile propeller shaft assemblies$330.00
- QC/T 29083-1992Quality grading of automotive propeller shaft assemblies$165.00
- QC/T 29087-1992Limit deviations of untoleranced dimensions for automotive welded parts$175.00
- QC/T 29087-2023Limit deviations of untoleranced dimensions for automotive welded parts$195.00
- QC/T 29088-1992Outlet flange dimensions of automotive engine carburettors$165.00
- QC/T 29089-1992Car dashboard skin softening$504.00
- QC/T 29089-2016PVC/ABS vacuum-formed skins for automotive instrument panels$205.00
- QC/T 29090-1992Technical specifications for automotive wiper motors$209.00
- QC/T 29090-2023Auto wiper motor$255.00
- QC/T 29091-1992Quality grading of automotive wiper motors$165.00
- QC/T 29092-1992Technical specifications for automotive heater motors$299.00
- QC/T 29093-1992Quality grading of automotive heater motors$165.00
- QC/T 29094-1992Technical specifications for automotive alternators$85.00
- QC/T 29095-1992Quality grading of automotive alternators$165.00
- QC/T 29096-1992Test method for automotive steering assembly$405.00
- QC/T 29096-2014Bench test methods for automotive steering gear assemblies$115.00
- QC/T 29097-1992Automotive steering assembly technology$289.00
- QC/T 29097-2014Technical requirements for automotive steering gear assemblies$100.00
- QC/T 29098-1992Quality grading of automotive steering gear assemblies$165.00
- QC/T 29099-1992General specifications for silicon rectifier alternators for motorcycles$269.00
- QC/T 29100-1992Technical specifications for library vehicles$249.00
- QC/T 29101-1992Cable assemblies for automobiles$105.00
- QC/T 29102-1992Quality grading of automotive carburettors$165.00
- QC/T 29104-1992Special Purpose Vehicle hydraulic system hydraulic oil solids pollution limits$289.00
- QC/T 29104-2013Limits of solid particle contamination of hydraulic oil in special purpose vehicle hydraulic systems$70.00
- QC/T 29105.1-1992Test methods for solid contamination of hydraulic oil in special purpose vehicle hydraulic systems - Terms and definitions$25.00
- QC/T 29105.2-1992Test methods for solid contamination of hydraulic oil in special purpose vehicle hydraulic systems - Apparatus and apparatus cleaning$25.00
- QC/T 29105.3-1992Test methods for solid contamination of hydraulic oil in special purpose vehicle hydraulic systems - Sampling$289.00
- QC/T 29105.3-2013Test methods for solid particle contamination of hydraulic oil in special purpose vehicle hydraulic systems - Sampling$70.00
- QC/T 29105.4-1992Test methods for solid contamination of hydraulic oil in special purpose vehicle hydraulic systems - Microscope particle counting method$85.00
- QC/T 29106-1992Low automotive wiring harness technical conditions$115.00
- QC/T 29106-2004Technical specifications for automotive low-voltage wire harnesses$105.00
- QC/T 29106-2014Technical specifications for automotive wire harnesses$105.00
- QC/T 29108-1993Quality grading of differential pinion and side gears of automotive drive axles$165.00
- QC/T 29109-1993Quality grading of drive and driven bevel gears of automotive drive axles$165.00
- QC/T 29110-1993Automotive transmissions and transfer case assemblies and their gears - Quality grading$165.00
- QC/T 29111-1993Road sweepers - Technical specifications$249.00
- QC/T 29112-1993Refuse collection vehicles - Technical specifications$245.00
- QC/T 29113-1993Technical specifications for vacuum suction-type excrement tankers$369.00
- QC/T 29114-1993Water sprinkler vehicles - Technical specifications$85.00
- QC/T 29115-1993Product quality inspection rules for motorcycles$205.00
- QC/T 29115-2013Product quality inspection rules for motorcycles and mopeds$180.00
- QC/T 29116-1993Evaluation method for quality inspection of motorcycle and moped products$135.00
- QC/T 29117-2013Product quality inspection rules for motorcycle and moped engines$225.00
- QC/T 29117.1-1993Quality inspection of motorcycle and moped products - Evaluation method for random inspection of complete vehicles (2500 km road test)$85.00
- QC/T 29117.10-1993Quality inspection of motorcycle products - Evaluation method for motorcycle engine assembly adjustment and appearance quality$475.00
- QC/T 29117.12-1993Quality inspection of motorcycle and moped products - Quality evaluation method for shock absorbers$105.00
- QC/T 29117.16-1993Quality inspection of motorcycle and moped products - Quality evaluation method for carburettors$205.00
- QC/T 29117.2-1993Quality inspection of motorcycle products - Evaluation method for complete vehicle assembly and adjustment$55.00
- QC/T 29117.3-1993Quality inspection of motorcycle products - Evaluation method for complete vehicle appearance quality$165.00
- QC/T 29117.4-1993Quality inspection of motorcycle products - Evaluation method for complete vehicle reliability$205.00
- QC/T 29117.6-1993Quality inspection of motorcycle products - Reliability statistical calculation methods and failure modes$375.00
- QC/T 29117.7-1993Quality inspection of motorcycle products - Evaluation method for motorcycle engine quality$115.00
- QC/T 29117.8-1993Quality inspection of motorcycle products - Evaluation method for motorcycle engine reliability$235.00
- QC/T 29117.9-1993Quality inspection of motorcycle products - Evaluation method for motorcycle engine durability$235.00