QC/T 29063.1-2011Technical specifications for automotive manual transmission assemblies - Part 1: Mini vehicles (English PDF)
汽车机械式变速器总成技术条件 第1部分：微型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 29063.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
QC/T 29063.1-2011 is the English-translated version of 汽车机械式变速器总成技术条件 第1部分：微型.
QC/T 29063.1-2011 is the Chinese standard "Technical specifications for automotive manual transmission assemblies - Part 1: Mini vehicles".
Its scope clause reads: This part of QC/T 29063 specifies the structural type, technical requirements, test conditions, inspection rules, marking, packaging, transportation, storage and quality guarantee of manual transmission assembly of light-duty automobile and mini-duty automobile .
This part is applicable to manual transmission assembly for passenger car and commercial car (hereinafter referred to as transmission) with an input torque not greater than 200N·m. Its clauses include terms and definitions.
Found what you need?
Document preview — QC/T 29063.1-2011
National Standard of the People's Republic of China
- ICS
- 43.040
- Replacing
- QC/T 29063-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- Introduction iii
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Structural type
- 5 Technical requirements
- 6 Test methods
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 9 Quality guarantee
- Annex A (Normative) Spontaneous out-of-gear test of transmission on road
1 Scope
This part of QC/T 29063 specifies the structural type, technical requirements, test conditions, inspection rules, marking, packaging, transportation, storage and quality guarantee of manual transmission assembly of light-duty automobile and mini-duty automobile .
This part is applicable to manual transmission assembly for passenger car and commercial car (hereinafter referred to as transmission) with an input torque not greater than 200N·m.
2 Normative references
The following referenced documents are indispensable for the application of of this document of QC/T 29063. For dated references, only the edition cited applies For undated reference, the latest edition (including any amendments) applies.
GB/T 12678 Reliability running test method for automobiles
QC/T 465 Automotive mechanical transmission terminology and definition
QC/T 568.1 Rig testing method for auto manual transmission assembly - Part 1: Mini-vehicle
QC/T 572 Rules for cleanliness of automobile - Determination method
QC/T 573 Rules for cleanliness of automobile - Personnel, articles and environment
QC/T 575 Work guide for automobile cleanness - Analysis method of impurity
Technical policy for the recovery of automobile products - No.9 Notice of the National Development and Reform Commission, the Ministry of Science and Technology and the Ministry of Ecology and Environment (2006)
3 Terms and definitions
For purpose of this part, the terms and definitions specified in QC/T 465 and those listed below apply.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 12678Reliability running test method for motor vehicles
- QC/T 465Automotive mechanical transmission terminology and definition
- QC/T 568.1Bench test methods for automotive manual transmission assemblies - Part 1: Mini vehicles
- QC/T 572Guidelines for automotive cleanliness - Measurement method
- QC/T 573Guidelines for automotive cleanliness - Personnel, materials and environment
- QC/T 575Guidelines for automotive cleanliness - Analysis method for impurities
Similar standards
Editions of QC/T 29063.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 29063.1-2011 | Technical specifications for automotive manual transmission assemblies - Part 1: Mini vehicles | current edition | Current |
| QC/T 29063-1992 | Technical specifications for automotive manual transmission assemblies - Part 1: Mini vehicles | previous edition | Superseded |
This page sells the current edition, QC/T 29063.1-2011. Earlier editions are listed for reference only.
How to Download QC/T 29063.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12678-2021 — Reliability running test method for motor vehicles
QC/T 465-1999 — Terms and definitions for classification of automotive mechanical transmissions
QC/T 465-2023 — Automotive mechanical transmission terminology and definition
Secure payment via Stripe
Payments accepted
QC/T 29063.1-2011
$105.00