QC/T 29090-1992Technical specifications for automotive wiper motors (English PDF)
汽车用刮水电动机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 29090-1992 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 1993
Implementation date
January 1, 1993
Scope
QC/T 29090-1992 is the English-translated version of 汽车用刮水电动机技术条件.
QC/T 29090-1992 is the Chinese standard "Technical specifications for automotive wiper motors". Its scope clause reads: This standard specifies the technical requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of wiper motors for automobiles.
This standard is applicable to permanent magnet wiper motors for automobiles (“motors”). Its clauses include subject content and application scope; terms.
Found what you need?
Document preview — QC/T 29090-1992
National Standard of the People's Republic of China
- Replacing
- JB 3256-1983
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Subject content and application scope
- 2 Normative references
- 3 Terms
- 4 Technical requirements
- 5 Test methods
- 6 Inspection rules
- 7 Marking, packaging, transport and storage
- 8 Quality assurance
- 3.
1 Subject content and application scope
This standard specifies the technical requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of wiper motors for automobiles.
This standard is applicable to permanent magnet wiper motors for automobiles (“motors”).
2 Normative references
GB 2828 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB 10069.1 Measurement of airborne noise emitted by rotating electrical machinery
QC/T 44 Specification of electric windshield wiper for automobiles
ZB T35 001 Basic specifications for automotive electrical equipment
3 Terms
3.1 cold state
the state when the internal temperature of the motor is equal to the ambient temperature (18~28°C)
3.2 braking torque
the torque at which the output shaft of the motor is stopped after the motor is applied with the test voltage in the cold state (the value of low gear is taken for the double speed motor) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of QC/T 29090
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 29090-1992 | Technical specifications for automotive wiper motors | current edition | Current |
| JB 3256-1983 | Technical specifications for automotive wiper motors | previous edition | Superseded |
This page sells the current edition, QC/T 29090-1992. Earlier editions are listed for reference only.
How to Download QC/T 29090-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 29090-1992
$209.00