Search NB/T
500 NB/T standards in English, from NB/T 35039-2024 to NB/T 51042-2015, in code order.
- NB/T 35039-2024Regulations for geological observation of hydropower projects$1,175.00
- NB/T 35040-2014Design Code for Heating, Ventilation and Air Conditioning of Hydropower Station$2,060.00
- NB/T 35041-2014Design code of construction diversion for hydropower engineering$530.00
- NB/T 35041-2025Design Specifications for Diversion Design in Hydropower Project Construction$240.00
- NB/T 35042-2014Design code of communication for hydroelectric power plants$1,775.00
- NB/T 35042-2024Code for communication design of hydropower plants$890.00
- NB/T 35043-2014Guide for Short-Circuit Current Calculation in Three-Phase AC Systems of Hydropower Projects$1,475.00
- NB/T 35044-2014Specification for designing service power system for hydropower station$1,325.00
- NB/T 35044-2023Specification for designing service power system for hydropower station$1,100.00
- NB/T 35045-2014Code for manufacture, installation and acceptance of steel gates in hydropower engineering$2,900.00
- NB/T 35046-2014Code for calculating design flood of hydropower projects$1,535.00
- NB/T 35048-2015Specification for acceptance of hydropower projects$770.00
- NB/T 35049-2015Code for Sediment Design of Hydropower Projects$970.00
- NB/T 35050-2015Earthing design guide for hydropower station$1,100.00
- NB/T 35050-2023Technical specifications for grounding design of hydroelectric power plants$240.00
- NB/T 35051-2015Code for manufacture, erection and acceptance of gate hoists in hydropower projects$1,175.00
- NB/T 35052-2015Specification of Water Quality Analysis for Hydropower Engineering Geological Investigation$7,316.00
- NB/T 35052-2025Specifications for Water Quality Analysis in Geological Exploration of Hydropower Projects$240.00
- NB/T 35053-2015Design code for layered water intake of hydropower station$1,490.00
- NB/T 35054-2015Design code for fish passage facilities in hydropower projects$1,030.00
- NB/T 35054-2025Design Specifications for Fishways in Hydropower Projects$240.00
- NB/T 35056-2015Design code for steel penstocks of hydroelectric stations$2,800.00
- NB/T 35057-2024Code for seismic design of hydropower projects$920.00
- NB/T 35058-2015Technical Specification for Inspection of Rock Mass Quality of Hydropower Projects$1,000.00
- NB/T 35059-2015Code for post assessment of environmental impacts of river hydropower development$910.00
- NB/T 35060-2015Code for environmental protection design of hydropower projects resettlement$910.00
- NB/T 35061-2015Code for hydro-energy design of hydropower projects$500.00
- NB/T 35062-2015Design code for construction planning of rolled earth-rock dam$725.00
- NB/T 35063-2015Code for Environmental Supervision of Hydropower Project$1,130.00
- NB/T 35064-2015Specification for safety appraisal of hydropower engineering$1,070.00
- NB/T 35065-2015Technical specification for seismic exploration of hydropower projects$1,175.00
- NB/T 35066-2015Specification of overburden drilling techniques for hydropower projects$990.00
- NB/T 35067-2015Overvoltage protection and insulation coordination design guide for hydropower stations$770.00
- NB/T 35068-2015Code for environmental impact assessment of river hydropower planning$1,170.00
- NB/T 35069-2015Preparation specification for planning outline of land acquisition and resettlement of hydropower projects$500.00
- NB/T 35069-2024Specification for Preparation of Resettlement Planning Outline for Hydropower Projects$1,259.00
- NB/T 35070-2015Preparation specification for planning report of land acquisition and resettlement of hydropower projects$860.00
- NB/T 35070-2024Rules for the preparation of resettlement planning for hydropower projects$240.00
- NB/T 35071-2015Code for hydropower planning of pumped storage power station$950.00
- NB/T 35071-2025Design Specifications for Hydropower Planning of Pumped Storage Power Stations$240.00
- NB/T 35072-2015Preparation regulation for special investment on soil and water conservation of hydropower projects$910.00
- NB/T 35072-2025Detailed Rules for Compiling Special Investment Plans for Soil and Water Conservation in Hydropower Projects$240.00
- NB/T 35073-2015Preparation regulation for special investment on hydrological surveying and forecasting and sediment monitoring of hydropower projects$1,010.00
- NB/T 35075-2015Specification for coding and management of product documents of hydropower projects$449.00
- NB/T 35076-2016Design code for secondary circuit of hydropower plants$1,330.00
- NB/T 35077-2016Technical code for fundamental geographic information system of digital basin based on hydropower projects$500.00
- NB/T 35078-2016Fundamental technical requirements for piston combined pressure reducing valve$269.00
- NB/T 35079-2016Design code for rock-bolted crane girders in underground powerhouses$1,010.00
- NB/T 35080-2016Design code for air cushion surge chamber of hydropower stations$720.00
- NB/T 35081-2016Pull-off testing specification for coating strength of metal structure in hydropower engineering$120.00
- NB/T 35082-2016Technical code for eco-restoration of vegetation concrete on steep slope of hydropower projects$790.00
- NB/T 35083-2016Specification for drafting as-built drawing documents of hydropower projects$1,265.00
- NB/T 35084-2016Specification for preparation of construction planning report of hydropower projects$1,800.00
- NB/T 35085-2016Specification for engineering geological investigation of resettlement area of hydropower projects$1,210.00
- NB/T 35086-2016Design code for water sealing device of gate in hydropower projects$920.00
- NB/T 35087-2016Series parameters of hydraulically operated and automatically engaged or disengaged beams for hoisting steel gates in hydropower projects$259.00
- NB/T 35088-2016Basic technical conditions of hydro-mechanical overspeed protection device for hydroelectric units$169.00
- NB/T 35089-2016Technical specification for cylindrical valves of hydraulic turbines$55.00
- NB/T 35090-2016Design code for underground powerhouses of hydropower stations$1,190.00
- NB/T 35091-2016Code for calculation of ecological flow of hydropower projects$1,180.00
- NB/T 35092-2017Design code for temperature control of concrete dam$2,500.00
- NB/T 35093-2017Code for calculation of reservoir backwater of hydropower projects$345.00
- NB/T 35094-2017Code for water temperature calculation of hydropower projects$510.00
- NB/T 35095-2017Code for hydrologic calculation of small watershed of hydropower projects$1,100.00
- NB/T 35096-2017Code for independent assessment of resettlement for hydropower projects$1,236.00
- NB/T 35097.2-2017Quality grade evaluation standard for unit works of hydropower projects - Part 2: Installation of hydraulic steel structures and hoists$260.00
- NB/T 35098-2017Specification for investigation of regional tectonic stability of hydropower projects$1,160.00
- NB/T 35099-2017Technical Specification of 3D Geological Modeling for Hydropower Projects$510.00
- NB/T 35100-2017Technical code for prestressed anchor cable on overburden layer of hydropower projects$725.00
- NB/T 35101-2017Technical specification for elastic wave test of hydropower projects$1,325.00
- NB/T 35102-2017Specification for in-situ soil test in borehole of hydropower projects$710.00
- NB/T 35103-2017Specification for borehole pumping test of hydropower projects$1,055.00
- NB/T 35104-2017Specification for borehole water injection test of hydropower projects$590.00
- NB/T 35105-2017Technical Specification for Electromagnetic Exploration of Hydropower Projects$1,070.00
- NB/T 35106-2017Preparation Regulation for Sub-bidding Budgetary Estimate of Hydropower Projects$360.00
- NB/T 35107-2017Preparation regulation for bidding design budgetary estimate of hydropower projects$315.00
- NB/T 35108-2018Code for Design of Gas-insulated Metal-enclosed Switchgear Installations$1,040.00
- NB/T 35109-2018Specification for 3D Laser Scanning Measurement of Hydropower Projects$845.00
- NB/T 35110-2018Code for Design of Underground Steel Bifurcated Pipe with Crescent Rib of Hydropower Stations$2,972.00
- NB/T 35111-2018Design Code for Spoil Areas of Hydropower Projects$500.00
- NB/T 35112-2018Technical specification for computerized tomography of hydropower projects$500.00
- NB/T 35113-2018Specification for Water Pressure Test in Borehole of Hydropower Projects$435.00
- NB/T 35114-2018Code for drilling test holes for geotechnical engineering and rock mass testing of hydropower projects$1,400.00
- NB/T 35115-2018Specification for Drilling Exploration of Hydropower Projects$1,070.00
- NB/T 35116-2018Specification for GNSS Survey of Hydropower Projects$575.00
- NB/T 35117-2018Specification for Slug Test in Borehole of Hydropower Project$465.00
- NB/T 35118-2018Technical Code for Oil System of Hydropower Stations$385.00
- NB/T 35119-2018Acceptance Specification for Soil and Water Conservation Engineering of Hydropower Projects$465.00
- NB/T 35120-2018Code for Design of Construction General Layout for Hydropower Projects$530.00
- NB/T 35121-2018Code for Design of Gully Treatment for Hydropower Projects$390.00
- NB/T 41001-2011Product Quality Classification for Capacitor Voltage Transformers$165.00
- NB/T 41004-2014Classification for phenomenon of power quality$540.00
- NB/T 41005-2014General technical requirements for control equipments of power quality$299.00
- NB/T 41006-2014Low voltage general compensation unit of active and reactive power$399.00
- NB/T 41007-2017Power supply technical guidelines for AC electric arc furnace - Design of power supply$185.00
- NB/T 41008-2017Power supply technical guidelines for AC electric arc furnace - Power quality assessment$315.00
- NB/T 41009-2017Technical guide for custom power technology$195.00
- NB/T 41010-2018Power supply technical guidelines for AC electric arc furnace - Power quality control$405.00
- NB/T 42001.1-2012The norm of energy consumption per unit product of thermal power equipment manufacturing enterprises. Part 1: Utility boiler$355.00
- NB/T 42002-2012Copper-clad Aluminum Bus Bars for Electrical Purposes$165.00
- NB/T 42002-2023Copper-clad aluminum bus bars for electrical purposes$255.00
- NB/T 42003-2013Methods for High Voltage Motor Core (Stamping) Insulation Test$229.00
- NB/T 42003-2023Insulation test method on core (lamination) of high voltage electrical machines$210.00
- NB/T 42004-2013Test Method for Electrical Endurance Testing on Ground Insulation of Stator Coil of High Voltage AC Machines$105.00
- NB/T 42005-2013Test Method for Thermal Voltage-endurance Testing on Groundwall Insulation of Stator Coil of High Voltage AC Machines$165.00
- NB/T 42006-2013Electrolyte for vanadium flow battery - Test method$255.00
- NB/T 42007-2013Bipolar plate for vanadium flow battery - Test method$135.00
- NB/T 42008-2013Reciprocating Internal Combustion Gas Generating Set - Nomenclature and Code of Designations$165.00
- NB/T 42009-2013Reciprocating Internal Combustion Gas Generating Set - Safety Requirements$449.00
- NB/T 42010-2013Reciprocating Internal Combustion Gas Generating Set - Terminology$135.00
- NB/T 42011-2013Reciprocating Internal Combustion Gas Generating Set - Specifications for Classification, Component and Disposal of Gas Fuel$189.00
- NB/T 42012-2013Dimension and Feature of 1100 kV Composite String Insulator for A.C Substation and Electrical Equipment$169.00
- NB/T 42013-2013Technical Specification for Urban Transit PSCADA System$435.00
- NB/T 42014-2013Integrated Automation System for Electrified Railway Traction Power Supply Substation$315.00
- NB/T 42015-2013Technical Specification for Recorder and Analyzer of Messages in Smart Substation Network$195.00
- NB/T 42016-2013Gas supply device for skid-mounted liquefied natural gas generator sets$189.00
- NB/T 42017-2013Reciprocating internal combustion gas generating sets - Conversion method for power and fuel consumption rate$525.00
- NB/T 42018-2013Copper-clad aluminum alloy wires for shielding$269.00
- NB/T 42019-2013Specification and Technical Requirements for 750kV and 1000kV Oil-immersed Shunt Reactors$429.00
- NB/T 42020-2013Specification and Technical Requirements for 750kV and 1000kV Oil-immersed Power Transformers$449.00
- NB/T 42021-2013Dry-type converter transformers for high voltage variable frequency speed regulation$520.00
- NB/T 42022-2013Oil-immersed converter transformers for high voltage variable frequency speed regulation$470.00
- NB/T 42023-2013Treatment of Uncertainty of the Test Data$790.00
- NB/T 42024-2013Traceability of Heavy Direct Current Measure System Based on Standard Shunts in High Power Laboratory$515.00
- NB/T 42025-2013Intelligent Gas-insulated Metal-enclosed Switchgear for Rated Voltages of 72.5kV and above$225.00
- NB/T 42026-2013Methods for compiling model designations of screw expanders$169.00
- NB/T 42027-2013Technical Specification for Pressure Retaining Casting of Screw Expander$165.00
- NB/T 42028-2014High-voltage static var compensator in magnetically controlled reactor type$520.00
- NB/T 42028-2023MCR-type high voltage static var compensation installations$500.00
- NB/T 42029.1-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 1: general design$169.00
- NB/T 42029.2-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 2: Infrastructure$315.00
- NB/T 42029.3-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 3: gas genset$349.00
- NB/T 42029.4-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 4: gas supply system$169.00
- NB/T 42029.5-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 5: cooling system$219.00
- NB/T 42029.6-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 6: power transmission and distribution system$169.00
- NB/T 42029.7-2014Design code for gas electric power plant with reciprocating internal combustion engines - Part 7: control system$169.00
- NB/T 42030-2014Technical specification for biomass circulating fluidized bed boiler$169.00
- NB/T 42031-2014Technical requirements for front screw feeding device of biomass energy boiler$169.00
- NB/T 42032.1-2014Nuclear power reactor coolant pump motor specification - Part 1: Asynchronous motor for shaft sealing pump$219.00
- NB/T 42032.2-2014Nuclear power reactor coolant pump motor specification - Part 2: Asynchronous motor for canned motor pump$219.00
- NB/T 42033-2014Specification of centralized control system for small hydropower stations group$219.00
- NB/T 42034-2014Design guidelines for small hydropower unit operated in isolated grid$105.00
- NB/T 42035-2014Fundamental technical specifications for turbine pressure relief valve and its control system$109.00
- NB/T 42035-2023Fundamental technical specifications for turbine pressure relief valve and its control system$135.00
- NB/T 42036-2014Specification for metal of rotor of screw expanding machine$219.00
- NB/T 42037-2014Anti-corrosion cable support system$429.00
- NB/T 42038-2014Auxiliary energy saving socket-outlets for household and similar purposes$219.00
- NB/T 42039-2014Wide voltage input and regulated output isolated DC-DC module power supply$455.00
- NB/T 42040-2014General specification for vanadium flow battery$199.00
- NB/T 42041-2014Specification for small hydropower unit installation$810.00
- NB/T 42042-2014Intermediate strength aluminium alloy wire for overhead line conductors$25.00
- NB/T 42043-2014High voltage static synchronous compensation installations$654.00
- NB/T 42044-2014Alternating-current metal-enclosed intelligent switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV$419.00
- NB/T 42045-2015Specification of steel Chimney of waste heat boiler$169.00
- NB/T 42046-2015Diverter damper technical specification$169.00
- NB/T 42047-2015Specification for waste heat boilers of coke dry quenching$169.00
- NB/T 42048-2015Specification of sintering heat recovery boiler$169.00
- NB/T 42049-2015Metal-oxide surge arresters without gaps for DC systems of 3 kV and below$120.00
- NB/T 42050-2015Optical fiber composite medium-voltage cable$425.00
- NB/T 42051-2015Cross-linked polyethylene insulated cables with aluminum alloy conductor for rated voltage of 0.6/1kV$405.00
- NB/T 42052-2015Specification for small hydropower unit starting test$369.00
- NB/T 42053-2015Technical Specification of Anti-islanding test apparatus$249.00
- NB/T 42054-2015Technical requirements for operating device of small hydraulic turbine$179.00
- NB/T 42055-2015Technical code for automatic control of low-voltage hydropower unit$189.00
- NB/T 42056-2015Fundamental technical requirements for inlet valves of small hydraulic turbine$209.00
- NB/T 42057-2015Low-voltage static var generator$485.00
- NB/T 42057-2023Low voltage static var generator$470.00
- NB/T 42058-2015General requirements for smart grid user side system$500.00
- NB/T 42059-2015Disconnectors of metal-oxide surge arresters for a.c. systems$429.00
- NB/T 42060-2015Thermal-resistant aluminum-alloy conductors, steel core reinforced for overhead transmission line$409.00
- NB/T 42061-2015Annealed aluminium conductors, steel supported$289.00
- NB/T 42062-2015Expanded diameter steel supported aluminium stranded conductors$289.00
- NB/T 42063-2015Test guide for high-voltage alternating current switches for rated voltages above 3.6 kV and up to and including 40.5 kV$179.00
- NB/T 42063-2021Test guide for 3.6 kV ~ 40.5 kV high voltage AC load switch$70.00
- NB/T 42064-2015Test guide for AC metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV$135.00
- NB/T 42064-2024Guide to the testing of AC metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV$255.00
- NB/T 42065-2016Guide for capacitive current switching conditioning test of vacuum circuit-breaker$229.00
- NB/T 42066-2016Specification and technical requirements for 6 kV to 35 kV dry-type aluminum winding power transformers$389.00
- NB/T 42067-2016Specification and technical requirements for 6kV~35kV oil-immersed aluminum winding distribution transformers$255.00
- NB/T 42068-2016Ultrasonic examination for body and rotors of screw expander$169.00
- NB/T 42069-2016Technical specification of screw expander packaging transport and storage$169.00
- NB/T 42070-2016Mechanical connection size with driven components for screw expander$89.00
- NB/T 42071-2016The technical specification of intelligent unit for protection and control in smart substation$349.00
- NB/T 42072-2016The naming method of product type for relay protection and security automatic equipment$89.00
- NB/T 42073-2016Electric cables for photovoltaic systems$389.00
- NB/T 42074-2016Specification of safety for unattended small hydropower station$169.00
- NB/T 42075-2016Technical code for supervisory and control of unattended small hydropower station$150.00
- NB/T 42076-2016Guide to the selection of arc flash protection equipment$309.00
- NB/T 42077-2016In-cable Control and Protective Device for Mode 2 Charging of Electric Road Vehicles (IC-CPD)$435.00
- NB/T 42078-2016Specification for water passage components of small hydraulic turbines$329.00
- NB/T 42079-2016Specification for static exciter of small hydropower unit$219.00
- NB/T 42080-2016Ion conductive membrane for vanadium flow battery - Test method$315.00
- NB/T 42080-2023Ion-conducting membrane for vanadium flow battery - General technical requirements and test methods$120.00
- NB/T 42081-2016Vanadium flow battery - Test method for single cell performance$240.00
- NB/T 42082-2016Vanadium flow battery - Test method for electrode$240.00
- NB/T 42083-2016The safe operation technical specification of stationary lead-acid batteries for electric power system$330.00
- NB/T 42084-2016Minimum allowable values of energy efficiency and energy efficiency grades for crane and metallurgical application three-phase induction motors$85.00
- NB/T 42085-2016Specification for shaft system torsional vibration monitoring and protection equipment of turbine-generator$240.00
- NB/T 42086-2016Specification for wireless temperature measuring equipment$489.00
- NB/T 42087-2016Technical specification for merging unit test equipment$285.00
- NB/T 42088-2016Technical specification for relay protection information system substation$360.00
- NB/T 42089-2016Technical standard for power conversion system of electrochemical energy storage station$165.00
- NB/T 42090-2016Technical standard for monitoring and control system of electrochemical energy storage station$210.00
- NB/T 42090-2025Regulation for on-site acceptance testing of the electrochemical energy storage monitoring system$195.00
- NB/T 42091-2016Technical specification for lithium ion batteries of electrochemical energy storage station$289.00
- NB/T 42091-2024Guidelines for the evaluation of the state of lithium-ion batteries for power storage$255.00
- NB/T 42092-2016Guidance on energy efficiency assessment for steam system equipment$329.00
- NB/T 42093.1-2016Insulating systems of dry-type transformers - Test procedure for thermal evaluation - Part 1: Windings above 600 V$210.00
- NB/T 42093.2-2018Insulating systems of dry-type transformers - Test procedure for thermal evaluation - Part 2: Windings of 600 V and below$135.00
- NB/T 42094-2016Electrical test code for small hydropower units$525.00
- NB/T 42095-2016Specification of high oil pressure governors for small hydropower units$149.00
- NB/T 42096-2016Quality control specification for small hydraulic generator$195.00
- NB/T 42097-2016Technical specification for brushless excitation of small hydropower units$155.00
- NB/T 42098-2016Quality control specification for small turbine$385.00
- NB/T 42099-2016Guide for synthetic testing of high-voltage alternating current circuit-breakers$495.00
- NB/T 42099-2024Guide to the synthetic testing of high-voltage alternating current circuit-breakers$480.00
- NB/T 42100-2016Combined solid state switch for high voltage shunt capacitor bank$285.00
- NB/T 42101-2016General guide for type test and type test report of high-voltage switchgear$115.00
- NB/T 42102-2016Detailed operating rules for high voltage test techniques of high-voltage apparatus$115.00
- NB/T 42103-2016Technical specification of distributed-centralized PV combiner box$240.00
- NB/T 42104.1-2016Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 1: General climate conditions$465.00
- NB/T 42104.1-2024Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 1: General climatic conditions$240.00
- NB/T 42104.2-2016Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 2: Hot-dry climate conditions$275.00
- NB/T 42104.2-2024Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 2: Dry hot climate conditions$195.00
- NB/T 42104.3-2016Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 3: Damp-heat climate conditions$165.00
- NB/T 42104.3-2024Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 3: Hot and humid climate conditions$225.00
- NB/T 42104.4-2016Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 4: Plateau climate conditions$315.00
- NB/T 42104.4-2024Environmental adaptability test requirements for terrestrial crystalline silicon photovoltaic modules - Part 4: Plateau climate conditions$240.00
- NB/T 42105-2016Basin insulator for high-voltage alternating current gas-insulated metal-enclosed switchgear$300.00
- NB/T 42106-2016Thermal-resistant aluminium alloy expanded diameter conductors supported by aluminium tube$259.00
- NB/T 42107-2017High-voltage direct current circuit-breaker$285.00
- NB/T 42108-2017Connection devices for household and similar use for low-voltage circuit busbar$180.00
- NB/T 42109-2017Calculation method of gas mixture characteristic for reciprocating internal combustion gas generating set$135.00
- NB/T 42110-2017Pressure-relief devices of skid-mounted CNG natural gas generator set$185.00
- NB/T 42111-2017Technical requirements for skid-mounted gas generating set room$285.00
- NB/T 42112-2017Pollutant emission limits of reciprocating internal combustion gas genset$165.00
- NB/T 42113-2017Small and medium power gas generating set general technical specifications$265.00
- NB/T 42114-2017Small and medium power gas generating set - Test method$150.00
- NB/T 42115-2017Small and medium power gas generating set - Safety requirement$115.00
- NB/T 42116-2017Determination of aluminium, calcium, iron, magnesium, phosphorus, potassium, silicon, sodium, titanium in solid biofuels for biomass boiler$95.00
- NB/T 42117-2017Technical specification for the biomass boilers using water cooled vibrating grate$95.00
- NB/T 42118-2017Technical specification for biomass chain and travelling grate stoker boiler$95.00
- NB/T 42119.1-2017Customer energy management system of smart grid - Part 1: Technical guide$150.00
- NB/T 42119.2-2017Customer energy management system of smart grid - Part 2: Technical specification of master station$285.00
- NB/T 42120-2017Calibration specification of low frequency vibration sensor$135.00
- NB/T 42121-2017Technical specifications for thermal power generating units auxiliary motor frequency converter low voltage ride through$180.00
- NB/T 42122-2017General specification for electric furnace transformer protection device$240.00
- NB/T 42123-2017Calibration Specification for Electrical Measuring Transducers$300.00
- NB/T 42124-2017Calibration specification for measurement and control equipment$240.00
- NB/T 42125-2017Specification for voltage monitor$485.00
- NB/T 42126-2017General technical specifications of small hydropower units$575.00
- NB/T 42127-2017Guide for testing and acceptance of small hydropower units$390.00
- NB/T 42128-2017Fundamental technical requirements for inlet valve control system of small hydraulic turbine$210.00
- NB/T 42129-2017Basic specification of automatic control components (devices) and their related system for small hydropower unit$300.00
- NB/T 42130-2017Environmental conditions for photovoltaic products - Classification of climatic conditions$120.00
- NB/T 42131-2017Environmental testing requirements for photovoltaic modules - General principles$120.00
- NB/T 42132-2017Vanadium flow battery - Test method for stacks$195.00
- NB/T 42133-2017Electrolyte for vanadium flow battery - Technical specification$90.00
- NB/T 42134-2017Technological specification of battery management system for vanadium flow battery$120.00
- NB/T 42135-2017General specification for zinc-bromine flow battery$180.00
- NB/T 42136-2017Metal structural components of power facilities - Technical requirements of anticorrosion coatings in hot and humid environment$150.00
- NB/T 42137-2017Test guide for high-voltage alternating-current disconnectors and earthing switches$120.00
- NB/T 42138-2017Test guide for high-voltage alternating-current circuit-breakers$300.00
- NB/T 42139-2017Lead-acid battery for photovoltaic (PV) systems technical specification$180.00
- NB/T 42140-2017Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration$255.00
- NB/T 42141-2017The design and application guide of reactive power compensation installation for submerged arc furnace power supply system$300.00
- NB/T 42142-2018Technical specification of photovoltaic grid-connected micro inverter$510.00
- NB/T 42143-2018Technical specification of photovoltaic module power optimizer$495.00
- NB/T 42144-2018Vanadium flow battery - Maintenance requirements$90.00
- NB/T 42145-2018Vanadium flow battery - Installation specification$105.00
- NB/T 42146-2018Zinc bromine flow battery - Test methods of electrode, membrane and electrolyte$285.00
- NB/T 42147-2018Zero and low power consumption electronic starters for hermetic motor-compressors$180.00
- NB/T 42148.1-2018Switches for battery-powered appliances and equipment - Part 1: General requirements$450.00
- NB/T 42148.1-2020Switches for battery-operated appliances and equipment - Part 2-1: Particular requirements for power tool switches$729.00
- NB/T 42148.2-2020Switches for battery-powered appliances and equipment - Part 2-1: Particular requirements for switches for electric tools$240.00
- NB/T 42149-2018Miniature circuit breaker with remote control function (RC-MCB)$530.00
- NB/T 42150-2018Low voltage surge protector special protection equipment$455.00
- NB/T 42150-2021Specific protective devices for low-voltage surge protective devices$455.00
- NB/T 42152-2018General technical requirements for non-linear metal oxide resistors$240.00
- NB/T 42153-2018Plug-in metal-oxide surge arresters without gaps for a.c. systems$255.00
- NB/T 42154-2018Test guide for high-voltage/low-voltage prefabricated substations$120.00
- NB/T 42155-2018Minimum safety distance of 40.5kV AC metal-enclosed switchgear used for high altitude areas$150.00
- NB/T 42156-2018Distribution series capacitor installation$420.00
- NB/T 42157-2018Lead-acid carbon battery general technical specification$165.00
- NB/T 42158-2018Technical requirements of uninterruptible power supply equipment for nuclear power plants$255.00
- NB/T 42159-2018Specification for three-level bi-directional AC/DC converters$285.00
- NB/T 42160-2018Specification for three-level bi-directional DC/DC converters$240.00
- NB/T 42161-2018Technical requirements for electronic load controller of micro & mini sized hydro turbine generator unit$90.00
- NB/T 42162-2018Design specification for selection of small hydropower units$500.00
- NB/T 42163-2018Technical specification for self-shunt excitation system of small hydropower units$180.00
- NB/T 42164-2018PG series high-temperature canned motors (with pump) - Specification$150.00
- NB/T 42165-2018Specification for multi-terminal line protection$255.00
- NB/T 42165-2024Specification for multi-terminal line protection$420.00
- NB/T 42166-2018Technical specification of voltage-time feeder protection and control system on distribution network$195.00
- NB/T 42167-2018Specification for secondary combination device in prefabricated cabin$210.00
- NB/T 47001-2009Steel liquefied petroleum gas horizontal tanks - Types and basic parameters$195.00
- NB/T 47001-2023Steel liquefied gas horizontal tanks type and basic parameter$465.00
- NB/T 47002-2019Clad plate for pressure vessels (Parts 1 to 4)$545.00
- NB/T 47002.1-2009Explosion welded clad plate for pressure vessels - Part 1: Stainless steel-steel clad plate$85.00
- NB/T 47002.1-2019Clad plate for pressure vessel - Part 1: Stainless steel-steel clad plate$180.00
- NB/T 47002.2-2009Explosion welded clad plate for pressure vessels - Part 2: Nickel-steel clad plate$75.00
- NB/T 47002.2-2019Clad plate for pressure vessel - Part 2: Nickel-steel clad plate$165.00
- NB/T 47002.3-2009Explosion Welded Clad Plate for Pressure Vessels - Part 3: Titanium-Steel Clad Plate$65.00
- NB/T 47002.3-2019Clad plate for pressure vessel - Part 3: Titanium-steel clad plate$135.00
- NB/T 47002.4-2009Explosion welded clad plate for pressure vessels - Part 4: Copper-steel clad plate$75.00
- NB/T 47002.4-2019Clad plate for pressure vessel - Part 4: Copper-steel clad plate$150.00
- NB/T 47003.1-2009Steel welded atmospheric pressure vessels$2,975.00
- NB/T 47003.1-2022Atmospheric pressure vessels - Part 1: Steel welded atmospheric pressure vessels$2,000.00
- NB/T 47003.2-2009Silos for solid materials$285.00
- NB/T 47003.2-2022Atmospheric pressure vessels - Part 2: Silos for solid materials$1,400.00
- NB/T 47004-2009Plate heat exchangers$150.00
- NB/T 47004.1-2017Plate heat exchangers - Part 1: Plate-and-frame heat exchangers$520.00
- NB/T 47004.1-2025Plate heat exchangers - Part 1: Plate-and-frame heat exchangers$650.00
- NB/T 47004.2-2021Plate heat exchangers - Part 2: Welded plate heat exchangers$515.00
- NB/T 47005-2009Plate evaporator device$275.00
- NB/T 47005-2021Plate evaporator device$330.00
- NB/T 47006-2009[Renamed from JB/T 4757-2009] Aluminum plate-fin heat exchanger$700.00
- NB/T 47006-2019Aluminum plate-fin heat exchanger$700.00
- NB/T 47007-2010Air-cooled heat exchangers$260.00
- NB/T 47007-2018Air-cooled heat exchangers$1,350.00
- NB/T 47008-2010Carbon and alloy steel forgings for pressure equipments$95.00
- NB/T 47008-2017Carbon and alloy steel forgings for pressure equipment$105.00
- NB/T 47009-2010Low-alloy steel forgings for low temperature pressure equipment$75.00
- NB/T 47009-2017Low-alloy steel forgings for low temperature pressure equipments$165.00
- NB/T 47010-2010Stainless and heat-resisting steel forgings for pressure equipment$85.00
- NB/T 47010-2017Stainless and heat-resisting steel forgings for pressure equipment$225.00
- NB/T 47011-2010Zirconium pressure vessels$1,325.00
- NB/T 47011-2022Zirconium pressure vessels$1,375.00
- NB/T 47012-2010Pressure vessels for refrigerant equipment$800.00
- NB/T 47012-2020Pressure vessels for refrigerant device$575.00
- NB/T 47013.1-2015Nondestructive testing of pressure equipments - Part 1: General requirements$75.00
- NB/T 47013.10-2010Nondestructive testing of pressure equipments - Part 10: Ultrasonic time of flight diffraction technique$260.00
- NB/T 47013.10-2015Nondestructive testing of pressure equipments - Part 10: Ultrasonic time of flight diffraction technique$305.00
- NB/T 47013.11-2015Nondestructive testing of pressure equipments - Part 11: Standard practice for X-ray digital radiography$135.00
- NB/T 47013.11-2023Nondestructive testing of pressure equipments - Part 11: X-ray digital radiographic testing$500.00
- NB/T 47013.12-2015Nondestructive Testing of Pressure Equipments - Part 12: Magnetic flux leakage testing$105.00
- NB/T 47013.13-2015Nondestructive testing of pressure equipments - Part 13: Pulsed eddy current testing$105.00
- NB/T 47013.14-2016Nondestructive testing of pressure equipments - Part 14: X-ray Computed radiographic testing$165.00
- NB/T 47013.14-2023Nondestructive testing of pressure equipments - Part 14: X-ray computed radiographic testing$465.00
- NB/T 47013.15-2021Nondestructive testing of pressure equipments - Part 15: Phased-array ultrasonic testing$1,400.00
- NB/T 47013.16-2024Nondestructive testing of pressure equipments - Part 16: Infrared thermographic testing$240.00
- NB/T 47013.17-2024Nondestructive testing of pressure equipment - Part 17: Magnetic memory testing$195.00
- NB/T 47013.18-2024Nondestructive testing of pressure equipments - Part 18: Eddy current array testing$500.00
- NB/T 47013.2-2015Nondestructive testing of pressure equipments - Part 2: Radiographic testing$155.00
- NB/T 47013.21-2025Nondestructive testing of pressure equipments - Part 21: Alternating current field measurement technique (Exposure Draft)$465.00
- NB/T 47013.3-2015Nondestructive testing of pressure equipments - Part 3: Ultrasonic testing$245.00
- NB/T 47013.3-2023Nondestructive testing of pressure equipments - Part 3: Ultrasonic testing$2,000.00
- NB/T 47013.4-2015Nondestructive testing of pressure equipments - Part 4: Magnetic particle testing$105.00
- NB/T 47013.5-2015Nondestructive testing of pressure equipments - Part 5: Penetrant testing$75.00
- NB/T 47013.6-2015Nondestructive Testing of Pressure Equipments - Part 6: Eddy Current Testing$105.00
- NB/T 47013.7-2012Nondestructive testing of pressure equipments - Part 7: Visual examination$35.00
- NB/T 47013.8-2012Nondestructive testing of pressure equipments - Part 8: Leak Testing$185.00
- NB/T 47013.8-2025Non-destructive Testing of Pressure Equipment - Part 8: Leak Detection$455.00
- NB/T 47013.9-2012Nondestructive testing of pressure equipments - Part 9: Acoustic emission testing$75.00
- NB/T 47014-2011Welding procedure qualification for pressure equipment$285.00
- NB/T 47014-2023Welding procedure qualification for pressure equipments$1,175.00
- NB/T 47015-2011Welding Specification for pressure vessels$185.00
- NB/T 47015-2023Welding specification for pressure vessels$740.00
- NB/T 47016-2011Mechanical Property Tests of Product Welded Test Coupons for Pressure Equipments$75.00
- NB/T 47016-2023Mechanical property tests of product welded test coupons for pressure equipments$240.00
- NB/T 47017-2011Sightglass for pressure vessels$285.00
- NB/T 47018-2017Technical delivery conditions of welding materials for pressure equipment (Parts 1 to 7)$260.00
- NB/T 47018.1-2011Technical delivery conditions of welding materials for pressure equipment - Part 1: General rules for procurement$55.00
- NB/T 47018.1-2017Technical delivery conditions of welding materials for pressure equipment - Part 1: General rules for procurement$195.00
- NB/T 47018.2-2011Technical delivery conditions of welding materials for pressure equipment - Part 2: Electrodes for steel$35.00
- NB/T 47018.2-2017Technical delivery conditions of welding materials for pressure equipment - Part 2: Electrodes for steel$240.00
- NB/T 47018.3-2011Technical delivery conditions of welding materials for pressure equipment - Part 3: Steel electrodes and rods for gas shielded arc welding$35.00
- NB/T 47018.3-2017Technical delivery conditions of welding materials for pressure equipment - Part 3: Steel wires and filler rods for gas shielded arc welding$195.00
- NB/T 47018.3-2026Technical conditions for ordering welding consumables for pressure equipment—Part 3: Steel wire and filler wire for gas-shielded arc welding$240.00
- NB/T 47018.4-2011Technical delivery conditions of welding materials for pressure equipment - Part 4: Electrodes and fluxes for submerged arc welding$35.00
- NB/T 47018.4-2017Technical delivery conditions of welding materials for pressure equipment - Part 4: Steel wires and fluxes for submerged arc welding$145.00
- NB/T 47018.4-2022Technical conditions for ordering welding materials for pressure equipment - Part 4: Submerged arc welding wire and flux$180.00
- NB/T 47018.5-2011Technical delivery conditions of welding materials for pressure equipment - Part 5: Stainless steel strip electrodes and fluxes for overlay welding$55.00
- NB/T 47018.5-2017Technical delivery conditions of welding materials for pressure equipment - Part 5: Stainless steel strip electrodes and fluxes for overlay welding$195.00
- NB/T 47018.6-2011Technical delivery conditions of welding materials for pressure equipment - Part 6: Bare aluminum and aluminum-alloy welding electrodes and rods$55.00
- NB/T 47018.6-2022Technical conditions for ordering welding materials for pressure equipment - Part 6: Aluminum and aluminum alloy welding wires and filler wires$165.00
- NB/T 47018.7-2011Technical delivery conditions of welding materials for pressure equipment - Part 7: Titanium and titanium-alloy welding electrodes and rods$55.00
- NB/T 47018.7-2022Technical conditions for ordering welding materials for pressure equipment - Part 7: Titanium and titanium alloy welding wires and filler wires$165.00
- NB/T 47018.8-2022Technical conditions for ordering welding materials for pressure equipment - Part 8: Zirconium and zirconium alloy welding wires and filler wires$150.00
- NB/T 47019-2011Purchase technical specification for boiler and heat exchanger tubes/pipes (Parts 1 to 8)$260.00
- NB/T 47019-2021Purchase technical specification for boiler and heat exchanger tubes/pipes (Parts 1 to 9)$260.00
- NB/T 47019.1-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 1: General requirements$115.00
- NB/T 47019.1-2021Purchase technical specification for boiler & heat exchanger tubes - Part 1: General requirements$300.00
- NB/T 47019.2-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 2: Non-alloy and alloy steel with room temperature properties$105.00
- NB/T 47019.2-2021Purchase technical specification for boiler & heat exchanger tubes - Part 2: Non-alloy and alloy steel with room temperature properties$195.00
- NB/T 47019.3-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 3: Non-alloy and alloy steel with specified elevated temperature properties$435.00
- NB/T 47019.3-2021Purchase technical specification for boiler & heat exchanger tubes/pipes - Part 3: Non-alloy and alloy steel with specified elevated temperature properties$360.00
- NB/T 47019.4-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 4: Low alloy steel for low-temperature service$105.00
- NB/T 47019.4-2021Purchase technical specification for boiler & heat exchanger tubes - Part 4: Low alloy steel for low-temperature service$105.00
- NB/T 47019.5-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 5: Stainless steel$105.00
- NB/T 47019.5-2021Purchase technical specification for boiler & heat exchanger tubes - Part 5: Stainless steel$195.00
- NB/T 47019.6-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 6: Ferrite/austenite duplex steel$75.00
- NB/T 47019.6-2021Purchase technical specification for boiler & heat exchanger tubes - Part 6: Austenite-ferrite duplex steel$135.00
- NB/T 47019.7-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 7: Copper and copper alloy tube$135.00
- NB/T 47019.7-2021Purchase technical specification for boiler & heat exchanger tubes - Part 7: Copper and copper alloy$135.00
- NB/T 47019.8-2011Purchase technical specification for boiler and heat exchanger tubes/pipes - Part 8: Titanium and titanium alloy$135.00
- NB/T 47019.8-2021Purchase technical specification for boiler & heat exchanger tubes - Part 8: Titanium and titanium alloy$150.00
- NB/T 47019.9-2021Purchase technical specification for boiler and heat exchanger tubes - Part 9: Nickel and nickel alloy$150.00
- NB/T 47020-2012Type and Specification for Pressure Vessel Flanges$75.00
- NB/T 47021-2012A-type socket-weld flange$35.00
- NB/T 47022-2012Type B slip-on welding flange$35.00
- NB/T 47023-2012Welding neck flange$85.00
- NB/T 47024-2012Nonmetallic gaskets$25.00
- NB/T 47025-2012Spiral wound gaskets$35.00
- NB/T 47026-2012Double-jacketed gaskets$35.00
- NB/T 47027-2012Stud bolts and nuts for pressure vessel flanges$35.00
- NB/T 47028-2012Nickel and nickel alloy forgings for pressure vessels$245.00
- NB/T 47028-2023Nickel and nickel alloy forgings for pressure vessels$195.00
- NB/T 47029-2012Aluminium and aluminium alloy forgings for pressure vessels$105.00
- NB/T 47029-2023Aluminium and aluminium alloy forgings for pressure vessels$105.00
- NB/T 47030-2013Specification of High Frequency Resistance Welded Spiral Fin Tubes for Boiler$195.00
- NB/T 47031-2013Specification of Headers and Module for Spiral Fin Tubes$195.00
- NB/T 47032-2013Specification of Small Radius Bent-tube for Heat Recovery Boiler$135.00
- NB/T 47033-2013Attemperating and Pressure Reducing Devices$105.00
- NB/T 47033-2023Attemperating and pressure reducing devices$330.00
- NB/T 47034-2013Specification for Industrial Boilers$195.00
- NB/T 47034-2021Specification for industrial boilers$450.00
- NB/T 47035-2013Energy Performance Assessment for Industrial Boilers System$315.00
- NB/T 47036-2013Small Pressure Vessels for Refrigerant Equipment$465.00
- NB/T 47037-2013Methods for Model Compositing of Power Station Valves$165.00
- NB/T 47037-2021Method for compiling model designations of power station valves$210.00
- NB/T 47038-2013Constant Spring Support and Hanger$1,160.00
- NB/T 47038-2019Constant spring support and hanger$1,505.00
- NB/T 47039-2013Variable Spring Hangers$465.00
- NB/T 47040-2013Man-hole and Hand-hole of Boiler Set$225.00
- NB/T 47041-2014Vertical vessels supported by skirt$800.00
- NB/T 47042-2014Horizontal Vessels on Saddle Supports$385.00
- NB/T 47043-2014Technical specification for manufacture of boiler steel structures$485.00
- NB/T 47044-2014Power station valves$2,105.00
- NB/T 47045-2015Brazed plate heat exchanger$449.00
- NB/T 47045-2024Brazed plate heat exchangers$285.00
- NB/T 47046-2015Nickel and nickel alloy plates for pressure equipment$249.00
- NB/T 47047-2015Nickel and nickel alloy seamless tubes and pipes for pressure equipment$289.00
- NB/T 47048-2015Spiral plate heat exchanger$990.00
- NB/T 47048-2025Spiral Plate Heat Exchanger$1,175.00
- NB/T 47049-2016Technical specification for manufacture of tubular air preheaters$165.00
- NB/T 47050-2016Technical specification for reciprocating grate$260.00
- NB/T 47051-2016Technical specification for industrial boiler control devices$345.00
- NB/T 47052-2016Simple pressure vessels$515.00
- NB/T 47053-2016Safety self-locking quick opening closures$240.00
- NB/T 47054-2016Monolithic insulating joints$360.00
- NB/T 47055-2017Painting and packing specification of boiler$275.00
- NB/T 47056-2017Methods of testing microstructure and fracture for welding points of boiler pressure parts$165.00
- NB/T 47057-2017Tank containers for liquefied gases$900.00
- NB/T 47058-2017Road tankers for refrigerated liquefied gas$830.00
- NB/T 47059-2017Tank containers for refrigerated liquefied gas$1,300.00
- NB/T 47060-2017The rotary air preheater$270.00
- NB/T 47061-2017Energy efficiency index and grading of industrial boiler system$240.00
- NB/T 47062-2017Biomass molded fuel fired boilers$225.00
- NB/T 47063-2017Safety valves for power station$450.00
- NB/T 47064-2017Tank container for dangerous liquid goods$680.00
- NB/T 47065-2018Vessel supports (Parts 1 to 5)$260.00
- NB/T 47065.1-2018Vessel support - Part 1: Saddle support$575.00
- NB/T 47065.2-2018Vessel support - Part 2: Leg Support$390.00
- NB/T 47065.3-2018Vessel support - Part 3: Lug support$1,700.00
- NB/T 47065.4-2018Vessel support - Part 4: Bracket support$270.00
- NB/T 47065.5-2018Vessel support - Part 5: Support lugs with rigid rings$315.00
- NB/T 47066-2018Thermal performance test method for condensing boiler$1,100.00
- NB/T 51001-2011Coal Construction construction budget targets ground$229.00
- NB/T 51002-2012Methods for Solid-Filling Coal Mining with Comprehensive Mechanization$150.00
- NB/T 51003-2012Design specification for comprehensive gas control of coal mining face$129.00
- NB/T 51004-2012Specifications for Compiling Geology Instructions of Coal Uncovering in Mine Passageway$109.00
- NB/T 51005-2012Design Compiling Specifications of Coal Uncovering in Mine Passageway$149.00
- NB/T 51006-2012Technical Specifications of Gas Pre-drainage and Eliminating Outburst Effect Assessment$129.00
- NB/T 51007-2012Technical Specifications of Integrated Pillarless Coal Production and Methane Extraction$129.00
- NB/T 51008-2012Determination of Thermal Environment and Evaluation Methods in Coal Mine$165.00
- NB/T 51009-2013Code of the Coal Geological Engineering Supervision$1,070.00
- NB/T 51010-2013Code for construction organization design of coal preparation plants in coal industry$560.00
- NB/T 51011-2014Determination of oil yield of oil shale - Gray-King method$159.00
- NB/T 51012-2014Regenerative oxidizer for coal mine ventilation air methane$199.00
- NB/T 51013-2014Engineering application of regenerative oxidizer for coal mine ventilation air methane - Safety requirements$159.00
- NB/T 51014-2014The code of construction project supervision & management of coal industry$1,310.00
- NB/T 51015-2014Specification for supervision of coal equipment engineering$1,775.00
- NB/T 51016-2014Powered support filters for coal mine$105.00
- NB/T 51017-2014Powered support filtration station for coal mine$199.00
- NB/T 51018-2014Throwing-type backfilling technology with solid materials in working face specifications$55.00
- NB/T 51019-2014Method of compaction testing of solid backfilling materials$40.00
- NB/T 51020-2014Specification of powered support used in coal mining by solid backfilling$199.00
- NB/T 51021-2014Technical conditions of crawler-type belt transfer conveyor for solid backfilling materials$149.00
- NB/T 51022-2014Technical specification of filling pipe for vertical feeding solid backfilling materials$169.00
- NB/T 51023-2014Technical requirements of solid backfilling materials free falling feeding system$149.00
- NB/T 51024-2014Technical conditions of porous bottom-unloading scraper conveyor for solid backfilling materials$205.00
- NB/T 51025-2014Code for coal resources exploration engineering surveying$575.00
- NB/T 51026-2014Technical requirements of reverse-osmosis process for advanced treatment of coal mine drainage water$150.00
- NB/T 51027-2014Preparation of coal core sample$150.00
- NB/T 51028-2015Code for coal mine construction organization plan of coal industry$960.00
- NB/T 51029-2015Standard for quality evaluation of shaft and drift engineering in coal mine$920.00
- NB/T 51030-2015Construction and Acceptance Specifications of Grouting Engineering at Working Face in Coal Mine Shaft and Roadway$790.00
- NB/T 51031-2015Technical rules for producing digital elevation models, digital orthophoto maps, digital line graphics in scale of 1:10000 1:50000 based on airborne interferometric synthetic aperture radar(InSAR)$435.00
- NB/T 51032-2015Terms relating to oil shale$175.00
- NB/T 51033-2015The dynamic apparent resistivity test method of coal bed mining overburden strata failure$95.00
- NB/T 51034-2015Advanced detection method of seismic wave in coal mine excavation roadway$115.00
- NB/T 51035-2015Channel wave seismic method in coal working face$115.00
- NB/T 51036-2015Portable multi parameter testing instrument for coal mine water$175.00
- NB/T 51037-2015Surrounding rock test method of mine seismic transmission tomography$95.00
- NB/T 51038-2015The data collecting method of parallel electrical prospection in coal mine$95.00
- NB/T 51039-2015General regulations for monitoring and testing of coal mine energy saving$75.00
- NB/T 51040-2015Grade and limit of major process energy consumption of industrial boiler plants for coal mine$95.00
- NB/T 51041-2015The technical requirements of equipment selection and matching for ten-million-ton-level fully mechanized top coal caving mining face$115.00
- NB/T 51042-2015The specification for construction and acceptance of architectural engineering in coal preparation plant$1,350.00
All NB/T ranges
- NB/T 1001-2011 – NB/T 10473-2020
- NB/T 10474-2020 – NB/T 10962-2022
- NB/T 10963-2022 – NB/T 11437-2023
- NB/T 11438-2023 – NB/T 11916-2025
- NB/T 11917-2025 – NB/T 20039.11-2011
- NB/T 20039.11-2023 – NB/T 20411-2017
- NB/T 20412-2017 – NB/T 25083-2018
- NB/T 25084-2018 – NB/T 35039-2014
- NB/T 35039-2024 – NB/T 51042-2015
- NB/T 51043-2015 – NB/T 51080-2017