NB/T 42018-2013Copper-clad aluminum alloy wires for shielding (English PDF)
屏蔽用铜包铝合金线
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 42018-2013 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
November 28, 2013
Implementation date
April 1, 2014
Scope
NB/T 42018-2013 is the English-translated version of 屏蔽用铜包铝合金线.
Copper-clad aluminium alloy wire used for shielding is the subject of NB/T 42018-2013, a recommended standard of the Chinese energy industry. It classifies the product and lays down the technical requirements, the test methods and the inspection rules for it, as well as the marking, packaging and storage arrangements.
The wire it describes is intended for the shields of wires and cables. Its checks draw on GB/T 3048.2-2007, GB/T 4909.2-2009, GB/T 4909.3-2009, GB/T 4909.4-2009, GB/T 4909.5-2009, GB/T 4909.9-2009, GB/T 4909.10-2009, GB/T 4909.11-2009, GB/T 5121.1-2008, GB/T 10125-2002, GB/T 16825.2-2005 and SJ/T 11365-2006. Issued on 28 November 2013, it has applied since 1 April 2014.
Found what you need?
Document preview — NB/T 42018-2013
National Standard of the People's Republic of China
- ICS
- 29.060.10
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
NB/T 42018-2013 was issued by NEA on 28 November 2013 and has been in force since 1 April 2014.
2 Scope
Copper-clad aluminium alloy wire used for shielding is the subject of NB/T 42018-2013, a recommended standard of the Chinese energy industry. It classifies the product and lays down the technical requirements, the test methods and the inspection rules for it, as well as the marking, packaging and storage arrangements. The wire it describes is intended for the shields of wires and cables. Its checks draw on GB/T 3048.2-2007, GB/T 4909.2-2009, GB/T 4909.3-2009, GB/T 4909.4-2009, GB/T 4909.5-2009, GB/T 4909.9-2009, GB/T 4909.10-2009, GB/T 4909.11-2009, GB/T 5121.1-2008, GB/T 10125-2002, GB/T 16825.2-2005 and SJ/T 11365-2006.
3 Normative references
NB/T 42018-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 3048.2-2007 — Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials
GB/T 4909.2-2009 — Test methods for bare wires - Part 2: Measurement of dimensions
GB/T 4909.3-2009 — Test methods for bare wires - Part 3: Tensile test
GB/T 4909.4-2009 — Test methods for bare wires - Part 4: Torsion test
GB/T 4909.5-2009 — Test methods for bare wires - Part 5: Bend test - Reverse bend test
GB/T 4909.9-2009 — Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method
GB/T 4909.10-2009 — Test methods for bare wires - Part 10: Test for continuity of coating - Ammonium persulphate solution method
GB/T 4909.11-2009 — Test methods for bare wires - Part 11: Test for adherence of coating
GB/T 5121.1-2008 — Methods for chemical analysis of copper and copper alloys -- Part 1: Determination of copper content
GB/T 10125-2002
GB/T 16825.2-2005
SJ/T 11365-2006
4 About this standard
Issued by: NEA
English translation: about 15 pages
5 Classification and status
International classification (ICS): 29.060.10
Prefix NB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3048.2-2007Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials
- GB/T 4909.2-2009Test methods for bare wires - Part 2: Measurement of dimensions
- GB/T 4909.3-2009Test methods for bare wires - Part 3: Tensile test
- GB/T 4909.4-2009Test methods for bare wires - Part 4: Torsion test
- GB/T 4909.5-2009Test methods for bare wires - Part 5: Bend test - Reverse bend test
- GB/T 4909.9-2009Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method
SJ/T 11365-2006
Similar standards
How to Download NB/T 42018-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3048.2-2007 — Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials
GB/T 4909.10-2009 — Test methods for bare wires - Part 10: Test for continuity of coating - Ammonium persulphate solution method
GB/T 4909.11-2009 — Test methods for bare wires - Part 11: Test for adherence of coating
Secure payment via Stripe
Payments accepted
NB/T 42018-2013
$269.00