NB/T 47018.3-2026Technical conditions for ordering welding consumables for pressure equipment—Part 3: Steel wire and filler wire for gas-shielded arc welding (English PDF)
承压设备用焊接材料订货技术条件 第3部分:气体保护电弧焊钢焊丝和填充丝
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for NB/T 47018.3-2026 in 30 minutes.
Issued by
National Energy Administration
Level / Type
Industry · Recommended
Issue date
June 26, 2026
Implementation date
December 26, 2026
Scope
NB/T 47018.3-2026 is the English-translated version of 承压设备用焊接材料订货技术条件 第3部分:气体保护电弧焊钢焊丝和填充丝.
NB/T 47018.3-2026 is the Chinese industry standard "Technical conditions for ordering welding consumables for pressure equipment—Part 3: Steel wire and filler wire for gas-shielded arc welding".
It was issued on June 26, 2026 by the National Energy Administration, and takes effect on December 26, 2026. It is a current standard and replaces NB/T 47018.3-2017.
Found what you need?
Document preview — NB/T 47018.3-2026
National Standard of the People's Republic of China
Issued by: National Energy Administration
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Technical Requirements
- 4 Mechanical Properties and Bending Test of Deposited Metal
- 5 Product Marking
1 Foreword
NB/T 47018.3-2026 was issued by National Energy Administration on 26 June 2026 and takes effect on 26 December 2026.
It replaces the earlier edition NB/T 47018.3-2017, NB/T 47018.3-2011.
It is one of 16 parts of the NB/T 47018 series.
2 Scope Preview
NB/T 47018.3-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 4,537 other NB/T standards.
Of the 1,959 NB/T standards that do carry an ICS number, 1,265 (65%) fall under ICS 27, in the field of energy and heat transfer engineering.
3 About this standard
Issued by: National Energy Administration
4 Related standards
Other parts of this standard:
NB/T 47018-2017 — Technical delivery conditions of welding materials for pressure equipment (Parts 1 to 7)
NB/T 47018.1-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 1: General rules for procurement
NB/T 47018.1-2017 — Technical delivery conditions of welding materials for pressure equipment - Part 1: General rules for procurement
NB/T 47018.2-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 2: Electrodes for steel
NB/T 47018.2-2017 — Technical delivery conditions of welding materials for pressure equipment - Part 2: Electrodes for steel
NB/T 47018.4-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 4: Electrodes and fluxes for submerged arc welding
NB/T 47018.4-2017 — Technical delivery conditions of welding materials for pressure equipment - Part 4: Steel wires and fluxes for submerged arc welding
NB/T 47018.4-2022 — Technical conditions for ordering welding materials for pressure equipment - Part 4: Submerged arc welding wire and flux
NB/T 47018.5-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 5: Stainless steel strip electrodes and fluxes for overlay welding
NB/T 47018.5-2017 — Technical delivery conditions of welding materials for pressure equipment - Part 5: Stainless steel strip electrodes and fluxes for overlay welding
NB/T 47018.6-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 6: Bare aluminum and aluminum-alloy welding electrodes and rods
NB/T 47018.6-2022 — Technical conditions for ordering welding materials for pressure equipment - Part 6: Aluminum and aluminum alloy welding wires and filler wires
NB/T 47018.7-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 7: Titanium and titanium-alloy welding electrodes and rods
NB/T 47018.7-2022 — Technical conditions for ordering welding materials for pressure equipment - Part 7: Titanium and titanium alloy welding wires and filler wires
NB/T 47018.8-2022 — Technical conditions for ordering welding materials for pressure equipment - Part 8: Zirconium and zirconium alloy welding wires and filler wires
Other editions:
NB/T 47018.3-2017 (earlier edition)
NB/T 47018.3-2011 (earlier edition)
5 Classification and status
Prefix NB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 150.2-2024Pressure vessels - Part 2: Materials
- NB/T 47018.1-2017Technical delivery conditions of welding materials for pressure equipment - Part 1: General rules for procurement
- NB/T 47058-2017Road tankers for refrigerated liquefied gas
- GB 12337-2014Steel spherical tanks
- GB/T 12337-2014Steel spherical tanks
Editions of NB/T 47018.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 47018.3-2026 | Technical conditions for ordering welding consumables for pressure equipment—Part 3: Steel wire and filler wire for gas-shielded arc welding | — | Valid |
| NB/T 47018.3-2017 | Technical permission of welding materials for pressure equipment - Section 3: Steel electrodes and rods for gas shielded arc welding | — | Obsolete |
| NB/T 47018.3-2011 | Technical permission of welding materials for pressure equipment. Section 3: Steel electrodes and rods for gas shielded arc welding | — | Obsolete |
This page sells the current edition, NB/T 47018.3-2026. Earlier editions are listed for reference only.
How to Download NB/T 47018.3-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 47018.4-2022 — Technical conditions for ordering welding materials for pressure equipment - Part 4: Submerged arc welding wire and flux
NB/T 47018.2-2011 — Technical delivery conditions of welding materials for pressure equipment - Part 2: Electrodes for steel
NB/T 47018.4-2017 — Technical delivery conditions of welding materials for pressure equipment - Part 4: Steel wires and fluxes for submerged arc welding
NB/T 47018.3-2026
$240.00