Valid

NB/T 47014-2011Welding procedure qualification for pressure equipment (English PDF)

承压设备焊接工艺评定

Preview PDF

This is a limited preview

Buy now to download the full PDF (33 pages)

Need quotation for your management?

Get a formal quotation for NB/T 47014-2011 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

July 1, 2011

Implementation date

October 1, 2011

Scope

NB/T 47014-2011 is the English-translated version of 承压设备焊接工艺评定.

NB/T 47014-2011 is the Chinese standard "Welding procedure qualification for pressure equipment".

Its scope clause reads: This standard specifies the rules, test methods and qualified indexes of welding procedure qualification for butt weld and fillet weld, anticorrosive overlaying process qualification, welding procedure qualification for composite metallic materials, welding procedure qualification and supplementary welding procedure qualification for heat exchange tube and tube plate, and stud arc welding procedure qualification, for pressure equipment (boiler, pressure vessel and pressure piping).

This standard is applicable to welding techniques such as oxyfuel gas welding, shielded metal arc welding, submerged arc welding, gas tungstun arc welding, gas metal arc welding, electroslag welding, plasma arc welding, friction welding, electrogas welding and stud arc welding.

This standard is not applicable to gas cylinder. Its clauses include terms and definitions.

Found what you need?

Document preview — NB/T 47014-2011

National Standard of the People's Republic of China

Replacing
JB 4708-2000

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 General
  • 5 Welding Procedure Qualification Factors and Classification
  • 6 Butt Weld and Fillet Weld Welding Procedure Qualification
  • 7 Anticorrosive Overlaying Procedure Qualification
  • Appendix A (Informative) Flow Diagram of Welding Procedure Specification
  • Appendix B (Normative) Additional Regulations for Base Metal, Filler Metal and Welding Technique
  • Appendix C (Normative) Welding Procedure Qualification for Composite Metallic Materials
  • Appendix E (Normative) Stud Arc Welding Procedure Qualification
  • Appendix F (Informative) Recommended Format of Welding Procedure Qualification Table
  • Appendix G (Informative) Common English Abbreviations and Codes for Welding Procedure Qualification

1 Scope

This standard specifies the rules, test methods and qualified indexes of welding procedure qualification for butt weld and fillet weld, anticorrosive overlaying process qualification, welding procedure qualification for composite metallic materials, welding procedure qualification and supplementary welding procedure qualification for heat exchange tube and tube plate, and stud arc welding procedure qualification, for pressure equipment (boiler, pressure vessel and pressure piping).

This standard is applicable to welding techniques such as oxyfuel gas welding, shielded metal arc welding, submerged arc welding, gas tungstun arc welding, gas metal arc welding, electroslag welding, plasma arc welding, friction welding, electrogas welding and stud arc welding.

This standard is not applicable to gas cylinder.

2 Normative References

The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the dated versions apply to this standard. For undated references, the latest edition of the normative document (include all the amendments) is applicable to this standard.

GB 150 (all Parts) Pressure Vessels

GB 151 Tubular Heat Exchangers

GB/T 228 Metallic Materials-Tensile Testing

GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method

GB/T 699 Quality Carbon Structural Steels

GB/T 700 Carbon Structural Steels

GB/T 710 Hot-rolled Quality Carbon Structural Steel Sheets and Strips

GB/T 711 Hot-rolled Quality Carbon Structural Steel Plates Sheets and Wide Strips

GB 713 Steel Plates for Boiler and Pressure Vessels

GB 912 Hot-Rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels

GB/T 1176 Specification for Cast Copper Alloys

GB/T 1527 Drawn Tube of Copper and Copper Alloys

GB/T 1528 Extruded Tube of Copper and Copper Alloys

GB/T 1591 High Strength Low Alloy Structural Steels

GB/T 2040 Sheet of Copper and Copper Alloy

GB/T 2054 Nickel and Nickel Alloy Sheets

GB/T 2653 Bend Test Methods on Welded Joints

GB/T 2882 Product of Geographical Indication-Fuling Mustard Tuber

GB/T 3077 Alloy Structure Steels

GB 3087 Seamless Steel Tubes for Low and Medium Pressure

GB/T 3091 Welded Steel Pipes for Low Pressure Liquid Delivery

GB/T 3274 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels

GB/T 3280 Cold Rolled Stainless Steel Plate Sheet and Strip

GB/T 3375 Welding Terminology

GB 3531 Low Alloy Steel Plates for Low Temperature Pressure Vessels

GB/T 3621 Titanium and Titanium Alloy Plate and Sheet

GB/T 3624 Titanium and Titanium Alloy Seamless Tubes

GB/T 3625 Titanium and Titanium Alloy Tube for Condensers and Heat Exchangers

GB/T 3670 Coated Electrodes for Copper and Copper Alloys

GB/T 3880 (all parts) Wrought Aluminium and Aluminium Alloy Plates, Sheets and Strips for General Engineering

GB/T 4237 Hot Rolled Stainless Steel Plate Sheet and Strip

GB/T 4423 Copper and Copper-alloy Cold-drawn Rod and Bar

GB/T 4435 Nickel and Nickel Alloys Bars

GB/T 4437.1 Aluminium and Aluminium Alloy Extruded Tubes--Part 1: Seamless Tubes

GB/T 5293 Carbon Steel Electrodes and Fluxes for Submerged Arc Welding

GB 5310 Seamless Steel Tubes and Pipes for High Pressure Boiler

GB 6479 Seamless Steel Tubes For High-Pressure For Chemical Fertilizer Equipment

GB/T 6614 Titanium and Titanium Alloy Castings

GB 6653 Steel Plates and Strips for Welded Gas Cylinders

GB/T 6893 Aluminium and Aluminium Alloy Cold Drawn (Rolled) Seamless Tubes

GB/T 8163 Seamless Steel Tubes for Liquid Service

GB/T 8890 Seamless Copper Alloy Tube For Heat-Exchanger

GB/T 9460 Copper and Copper Alloy Wires and Rods

GB/T 9711.1 Petroleum and Natural Gas Industries-Steel Pipe for Pipelines-Technical Delivery Conditions-

Part 1: Pipes of Requirement Class A

GB/T 9711.2 Petroleum and Natural Gas Industries-Steel Pipe for Pipelines-Technical Delivery Conditions-

Part 2: Pipes of Requirements Class B

GB 9948 Seamless Steel Tubes for Petroleum Cracking

GB/T 11352 Carbon Steel Castings for General Engineering Purpose

GB/T 12229 General Purpose Industrial Valves-Specification of Carbon Steel Castings

GB/T 12230 General Purpose Industrial Valves-Specification of Stainless Steel Castings

GB/T 12459 Steel Butt-welding Seamless Pipe Fittings

GB/T 12470 Low alloy steel electrodes and fluxes for submerged arc welding

GB/T 12771 Welded Stainless Steel Pipes for Liquid Delivery

GB/T 13237 Cold-Rolled Quality Carbon Structural Steel Sheets and Strips

GB 13296 Seamless Stainless Steel Tubes for Boiler and Heat Exchanger

GB/T 13401 Steel Plate Butt-Welding Pipe Fittings

GB/T 13814 Nickel and Nickel Alloy Welding Rods

GB/T 14845 Titanium Sheet for Plate Heat Exchangers

GB/T 14976 Stainless Steel Seamless Tubes for Fluid Transport

GB/T 15008 Corrosion-resisting Alloy Bars

GB/T 15620 Nickel and Nickel alloy wires and rods

GB/T 16253 Steel Castings for Pressure Purposes

GB/T 16598 Titanium and Titanium Alloy Disc and Ring

GB/T 17791 Seamless Copper Tube for Air Conditioner and Refrigeration Equipment

GB/T 17854 Stainless Steel Electrodes and Fluxes for Submerged Arc Welding

GB/T 18984 Seamless Steel Tubes For Low-Temperature-Service Piping

GB 19189-2011 Quenched and Tempered High Strength Steel Plates for Pressure Vessels

GB/T 20878 Stainless and Heat-resisting Steels - Designation and Chemical Composition

GB/T 21832 Austenitic - Ferritic (Duplex) Grade Stainless Steel Welded Tubes and Pipes

GB/T 21833 Austenitic - Ferritic (Duplex) Grade Stainless Steel Seamless Tubes and Pipes

GB 24511-2009 Stainless Steel Plate, Sheet and Strip for Pressure Equipment

GB/T 24593 Welded Austenitic Stainless Steel Tubes for Boiler and Heat-exchanger

NB/T 47008 Carbon Steel and Alloy Steel Forgings for Pressure Equipment

NB/T 47009 Low-alloy Steel Forgings for Low Temperature Pressure Equipment

NB/T 47010 Stainless and Heat-resisting Steel Forgings for Pressure Equipment

NB/T 47018 (all parts) Technical Permission of Welding Materials for Pressure Equipment

JB/T 4730 (all parts) Nondestructive Testing of Pressure Equipment

JB/T 4734 Aluminium Welded Vessels

JB 4741 Nickel-copper Alloy Hot Rolled Plate for Pressure Vessels

JB 4742 Nickel-copper alloy Seamless Tube and Pipe for Pressure Vessels

JB 4743 Nickel-copper Alloy Forgings for Pressure Vessels

JB/T 9625 Specification for Pressure Retaining Casting of Boiler Pipe Fittings

JB/T 9626 Specification for Boiler Forging

JB/T 10087 Specifications for steel casting of steam turbines for pressure purposes

YB/T 5264 Corrosion-resisting Alloy Forging

YB/T 5353 Hot-rolled Plates of Corrosion-resisting

YB/T 5354 Cold-rolled Sheets of Corrosion-resisting Alloy

3 Terms and Definitions

For the purpose of this Standard, those defined in GB/T 3375 and the following terms and definitions apply.

3.1 Welding procedure qualification

Assessment of test process and result carried out to verify the correctness of the proposed welding procedure of weldment.

In this Standard, the welding procedure qualification refers to the process to carry out verifying test and result assessment for preliminary welding procedure specification, in order to make the mechanical property and bending property of welded joints or the chemical compositions of overlaying meet the requirements.

3.2 Preliminary welding procedure specification (pWPS)

Document of welding procedure proposed for welding procedure qualification.

3.3 Procedure qualification report (PQR)

Report recording verifying test and inspection result and assessing proposed pWPS.

3.4 Welding procedure specification (WPS)

Document of welding procedure prepared according to qualified PQR and for product welding.

3.5 Welding working instruction (WWI)

Detailed working document for processing and operation concerning weldment manufacturing. The operation instructions applied by welder in welding, which can guarantee the reproducibility of welding quality.

3.6 Supplementary welding procedure qualification

Assessment of verifying test and result carried out for proposed welding procedure specification in order to make the supplementary characteristics of the welded joint (e.g. fillet weld thickness of heat exchange tube and tube plate) meet the requirement.

3.7 Weldment

Pressure equipment or its parts that are connected by welding or of overlaying. The weldment is composed of two parts--base metal and welded joint (or overlay).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

Editions of NB/T 47014

EditionTitleRevisionStatus
NB/T 47014-2011Welding procedure qualification for pressure equipmentcurrent editionCurrent
JB 4708-2000Welding procedure qualification for pressure equipmentprevious editionSuperseded

This page sells the current edition, NB/T 47014-2011. Earlier editions are listed for reference only.

How to Download NB/T 47014-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
33 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 47014-2011

$285.00