HG/T 20212-2017Code for construction and acceptance of welded metal structure wet gas holders (English PDF)
金属焊接结构湿式气柜施工及验收规范
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20212-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
October 1, 2017
Scope
HG/T 20212-2017 is the English-translated version of 金属焊接结构湿式气柜施工及验收规范.
HG/T 20212-2017 is the recommended Chinese chemical industry code for wet gas holders of welded metal construction. It sets out how such holders are built and accepted, and it is written for units with a design pressure of not more than 8,000 Pa and a nominal volume between 50 m3 and 150,000 m3.
Filed under the Chinese classification P72 and the international classification 71.010, it belongs with the general codes of the chemical industry. Its work rests on a long list of cited documents, among them GB 50128, GB 50204, GB 50205, GB 50236, GB 713, GB/T 3274, GB/T 5117, GB/T 8163, HG/T 20237, JB/T 3223, NB/T 47013.2 and NB/T 47014.
It takes over from HGJ 212-1983. Issued on 12 April 2017, it has applied since 1 October 2017.
Found what you need?
Document preview — HG/T 20212-2017
National Standard of the People's Republic of China
- ICS
- 71.010
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 20212-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 April 2017 and has been in force since 1 October 2017.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 38 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry code for wet gas holders of welded metal construction. It sets out how such holders are built and accepted, and it is written for units with a design pressure of not more than 8,000 Pa and a nominal volume between 50 m3 and 150,000 m3. Filed under the Chinese classification P72 and the international classification 71.010, it belongs with the general codes of the chemical industry. Its work rests on a long list of cited documents, among them GB 50128, GB 50204, GB 50205, GB 50236, GB 713, GB/T 3274, GB/T 5117, GB/T 8163, HG/T 20237, JB/T 3223, NB/T 47013.2 and NB/T 47014. It takes over from HGJ 212-1983.
HG/T 20212-2017 falls under ICS 71.010, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 50128
GB 50204
GB 50205
GB 50236
GB 50726
GB 50727
GB 713
GB 2585
GB 3091
GB/T 3274
GB 4053
GB/T 5117
GB/T 5118
GB/T 5293
GB/T 8110
GB/T 8163
GB/T 8923.1
HG/T 20237
JB/T 3223
NB/T 47013.2
NB/T 47013.3
NB/T 47013.5
NB/T 47014
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 38 pages
5 Related standards
Standards on related subjects:
HG/T 20513-2014 — Design code of instrument grounding
SH/T 3407-2013 — Spiral wound gaskets for steel pipe flanges in petrochemical industry
SH/T 3537-2009 — Technical specification for construction of vertical cylindrical low temperature storage tank
HG/T 20686-2024 — Unified regulations on graphic symbols and text codes for electrical design in chemical enterprises (with explanations of the provisions)
HG/T 20203-2017 — Code for construction and acceptance of chemical machinery installation engineering (General requirements)
HG 20202-2014 — Code for construction and acceptance of degreasing project
6 Classification and status
International classification (ICS): 71.010
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 50128Code for construction and acceptance of vertical cylindrical steel welded storage tanks
- GB 50204Code for quality acceptance of concrete structure construction
- GB 50205Standard for acceptance of construction quality of steel structures
- GB 50236Code for construction of field equipment, industrial pipe welding engineering
- GB 50726Code for anticorrosive engineering construction of industrial euqipment and pipeline
- GB 50727Code for acceptance of construction quality of anticorrosive engineering of industrial equipment and pipeline
GB 3091 · GB 4053
Similar standards
How to Download HG/T 20212-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 2585-1981 — Technical requirements for 38kg/m to 50kg/m steel rails for railway
GB 2585-2007 — Hot-rolled steel rails for railway
GB 4053.1-1993 — Safety requirements for fixed steel vertical ladders
HG/T 20212-2017
$590.00