Valid

NB/T 47029-2012Aluminium and aluminium alloy forgings for pressure vessels (English PDF)

压力容器用铝及铝合金锻件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 47029-2012 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

November 9, 2012

Implementation date

November 9, 2012

Scope

NB/T 47029-2012 is the English-translated version of 压力容器用铝及铝合金锻件.

NB/T 47029-2012 is the Chinese standard "Aluminium and aluminium alloy forgings for pressure vessels". Its scope clause reads: This standard specifies the technical requirements, test methods and inspection rules of aluminium and aluminium alloy forgings (including hand forgings and die forgings).

This standard is applicable to aluminium and aluminium alloy forgings with a design pressure not greater than 10.0Mpa used for pressure vessels. Its clauses include terms and definitions.

Found what you need?

Document preview — NB/T 47029-2012

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Order information
  • 5 Technical requirements
  • 6 Test methods
  • 7 Inspection rules
  • 8 Packaging, marking and quality certificate

1 Scope

This standard specifies the technical requirements, test methods and inspection rules of aluminium and aluminium alloy forgings (including hand forgings and die forgings).

This standard is applicable to aluminium and aluminium alloy forgings with a design pressure not greater than 10.0Mpa used for pressure vessels.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 228.1-2010 Metallic materials - Tensile testing - Part 1: Method of test at room temperature

GB/T 3190 Wrought aluminium and aluminium alloy - Chemical composition

GB/T 3199 Wrought aluminium and aluminium alloy products - Packing marking transporting and storing

GB/T 20975 (all parts) Methods for chemical analysis of aluminium and aluminium alloys

JB/T 4730.5 Nondestructive testing of pressure equipment - Part 5: Penetrant testing

3 Terms and Definitions

For the purposes of this Standard, the following terms and definitions apply.

3.1 ring forging

axisymmetric hollow forging with an axial length (L) less than or equal to its outer diameter (D), as shown in Figure 1a), where the smaller of L and t is measured according to the nominal thickness.

3.2 disk forging

axisymmetric solid forging with an axial length (L) less than or equal to its outer diameter (D), as shown in Figure 1b), where L is measured according to the nominal thickness.

3.3 neck flange forging

axisymmetric hollow forging with two outer diameters in the axial direction, as shown in Figure 1c), where the larger of t1 and t2 is measured according to the nominal thickness.

3.4 bar forging

solid forging with a circular cross section and an axial length (L) greater than its outer diameter (D), as shown in Figure 1d), where D is measured according to the nominal thickness.

forging with a rectangular cross section and an axial length (L) greater than its lengths a and b, as shown in Figure 1e), the smaller of a and b is measured according to the nominal thickness.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download NB/T 47029-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 47029-2012

$105.00