Valid

NB/T 47050-2016Technical specification for reciprocating grate (English PDF)

往复炉排技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 47050-2016 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

August 16, 2016

Implementation date

December 1, 2016

Scope

NB/T 47050-2016 is the English-translated version of 往复炉排技术条件.

NB/T 47050-2016 is the Chinese standard "Technical specification for reciprocating grate".

Its scope clause reads: This standard specifies the terms and definitions, classification and model designation, technical requirements (including performance, design, manufacturing, and assembly requirements), test methods, inspection rules, painting, packaging, and accompanying documents for reciprocating grates.

This standard is applicable to reciprocating grates using coal and biomass as fuel. It may be used as a reference for grates of waste incinerators. Its clauses include terms and definitions; classification and model designation.

Found what you need?

Document preview — NB/T 47050-2016

National Standard of the People's Republic of China

Replacing
JB/T 9620-1999

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Contents
  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and model designation
  • 5 Technical requirements
  • 6 Test methods
  • 7 Inspection rules
  • 8 Painting, packaging and accompanying documents

1 Scope

This standard specifies the terms and definitions, classification and model designation, technical requirements (including performance, design, manufacturing, and assembly requirements), test methods, inspection rules, painting, packaging, and accompanying documents for reciprocating grates.

This standard is applicable to reciprocating grates using coal and biomass as fuel. It may be used as a reference for grates of waste incinerators.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 1804 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 2900.48 Electrotechnical terminology of boilers

GB/T 6414 Castings - System of dimensional tolerances and machining allowances

GB/T 8492 Heat-resistant steel and alloy castings for general applications

GB/T 9437 Heat resistant iron castings

GB/T 9439 Grey iron castings

GB/T 10180 Thermal performance test code for industrial boilers

GB/T 18342 Specifications of coal for chain and travelling grate stoker boiler

JB/T 1615 Technical specification for painting and packaging of boiler

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 2900.48 and the following apply.

3.1 reciprocating grate

grate that periodically feeds fuel and discharges ash and slag by means of reciprocating motion

Note: The grate is classified as a pusher type reciprocating grate when the grate bars move in the same direction as the fuel; otherwise, it is classified as a reverse pushing reciprocating grate.

3.2 main air compartment

air compartment located in the main combustion zone of the grate

Note: The location of this air compartment is determined according to the fuel characteristics.

3.3 main air compartment air pressure

average static pressure in any selected main air compartment, measured under the conditions that the air damper of this compartment is fully open, the air dampers of the other air compartments are fully closed, and both the air flow supplied to this compartment and the fuel-bed thickness are maintained constant

3.4

unevenness coefficient of air distribution across grate width ratio of the difference between the maximum longitudinal average outlet air pressure and the minimum longitudinal average outlet air pressure of the grate corresponding to the air compartment under test to the average outlet air pressure of the grate, expressed as a percentage

3.5

main air compartment air leakage ratio ratio of the difference between the outlet air flow through the grate surface corresponding to any selected main air compartment and the inlet air flow of that compartment to the inlet air flow, expressed as a percentage, measured under the conditions that the air damper of this compartment is fully open, the air dampers of the other air compartments are fully closed, and the inlet air flow of the compartment satisfies the main air compartment air pressure requirements

3.6

air ratio as other compartment(s) air damper(s) fully shut off ratio of the air flow entering the adjacent air compartment(s) to the air flow entering any selected main air compartment, expressed as a percentage, under the conditions that the air damper of this main air compartment is fully open, the air dampers of the other air compartments are fully closed, and the air flow supplied to this main air compartment satisfies the main air compartment air pressure requirement

3.7 fuel leakage ratio

mass ratio of the average amount of fuel leaked through the grate, including ash leakage, per unit time to the fuel consumption, expressed as a percentage

3.8 duration of continuous operation

uninterrupted operating time that the grate is capable of maintaining without shutdown for grate maintenance, including the hot standby shutdown time of the boiler

3.9 cooling performance

ratio of the total side area of the cooling fins of grate bars to the fire-facing area of the grate bars

4 Classification and model designation

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Editions of NB/T 47050

EditionTitleRevisionStatus
NB/T 47050-2016Technical specification for reciprocating gratecurrent editionCurrent
JB/T 9620-1999Technical specification for reciprocating grateprevious editionSuperseded

This page sells the current edition, NB/T 47050-2016. Earlier editions are listed for reference only.

How to Download NB/T 47050-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 47050-2016

$260.00