NB/T 47033-2013Attemperating and Pressure Reducing Devices (English PDF)
减温减压装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 47033-2013 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
November 28, 2013
Implementation date
April 1, 2014
Scope
NB/T 47033-2013 is the English-translated version of 减温减压装置.
NB/T 47033-2013 is the Chinese standard "Attemperating and Pressure Reducing Devices".
Its scope clause reads: This standard specifies technical requirements for order, model, performance, technology, inspection and test, painting, marking, packaging and delivery document together with installation etc. with regards to attemperating and pressure reducing devices.
This standard is applicable to steam-medium attemperating and pressure reducing devices, attemperating device and pressure reducing device (hereinafter referred to as "device"); the working pressure of inlet steam is not greater than 27MPa and working temperature is not greater than 590°C. Its clauses include order requirements.
Found what you need?
Document preview — NB/T 47033-2013
National Standard of the People's Republic of China
- Replacing
- JB/T 6323-2002
Issued by: National Energy Administration of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Order Requirements
- 4 Model
- 5 Structure Type
- 6 Performance Requirements
- 7 Technical Requirements
- 8 Inspection and Test
- 9 Painting, Marking, Packaging and Delivery Documents
- 10 Installation, Operation and Maintenance
- Appendix A (Informative) Order Requirements
- Appendix B (Informative) Typical System Legend for Attemperating and Pressure Reducing Devices
- Appendix C (Informative) Reference Flow Rate Table for Pipeline Media
1 Scope
This standard specifies technical requirements for order, model, performance, technology, inspection and test, painting, marking, packaging and delivery document together with installation etc. with regards to attemperating and pressure reducing devices.
This standard is applicable to steam-medium attemperating and pressure reducing devices, attemperating device and pressure reducing device (hereinafter referred to as "device"); the working pressure of inlet steam is not greater than 27MPa and working temperature is not greater than 590°C.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB 713 "Steel Plates for Boiler and Pressure Vessels"
GB 912 "Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels"
GB/T 983 "Stainless Steel Covered Electrodes"
GB 3087 "Seamless Steel Tubes for Low and Medium Pressure"
GB/T 3274 "Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels"
GB/T 5117 "Carbon Steel Covered Electrodes"
GB/T 5118 "Low Alloy Steel Covered Electrodes"
GB 5310 "Seamless Steel Tubes and Pipes for High Pressure Boiler"
GB/T 8110 "Welding Electrodes and Rods for Gas Shielding Arc Welding of Carbon and Low Alloy Steel"
GB/T 10868 "Steam Converting Valve for Power Station"
GB/T 10869 "Control Valves for Power Station"
GB/T 12229 "General Purpose Industrial Valves - Specification of Carbon Steel Castings"
GB/T 12243 "Spring Loaded Safety Valves"
GB/T 20801.3 "Pressure Piping Code-Industrial Piping - Part 3: Design and Calculation"
GB/T 20801.4 "Pressure Piping Code-Industrial Piping - Part 4: Fabrication and Assembly"
GB 50236 "Code for Construction of Field Equipment, Industrial Pipe Welding Engineering"
JB/T 1613 "Specification for Welding of Boiler Pressure Parts"
JB/T 2636 "Boiler Pressure Parts - Metallographic Examination and Fracture Test of Weld Joints"
JB/T 3375 "Rules for Receiving Acceptance of Materials for Boiler Construction"
JB/T 3595 "Valves for Power Station-General Requirements"
JB/T 4730.2 "Nondestructive Testing of Pressure Equipments-Part 2: Radiographic Testing"
JB/T 4730.3 "Nondestructive Testing of Pressure Equipments-Part 2: Ultrasonic Testing"
JB/T 4730.4 "Nondestructive Testing of Pressure Equipments-Part 2: Magnetic Particle Testing"
JB/T 4730.5 "Nondestructive Testing of Pressure Equipments-Part 5: Penetrant Testing"
JB/T 5263 "Specification for Steel Casting for Power Station Valves"
JB/T 9624 "Specification for Safety Valve of Fossil Power Station"
JB/T 9625 "Specification for Pressure Retaining Casting of Boiler Pipe Fittings"
JB/T 9626 "Specification for Boiler Forging"
NB/T 47014 "Welding Procedure Qualification for Pressure Equipment"
3 Order Requirements
For the convenience of user order, Table A.1 provides sample f […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of NB/T 47033
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 47033-2013 | Attemperating and Pressure Reducing Devices | current edition | Current |
| JB/T 6323-2002 | Attemperating and Pressure Reducing Devices | previous edition | Superseded |
This page sells the current edition, NB/T 47033-2013. Earlier editions are listed for reference only.
How to Download NB/T 47033-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 10186-2026 — Technical specification for power conversion equipment used in photovoltaic-storage systems
NB/T 11969-2026 — Guide for energy efficiency assessment of off-board conductive chargers for electric vehicles
NB/T 11970-2026 — Specification for operation safety evaluation of grid-connected electric vehicle charging facilities
NB/T 47033-2013
$105.00