Valid

NB/T 42059-2015Disconnectors of metal-oxide surge arresters for a.c. systems (English PDF)

交流电力系统金属氧化物避雷器用脱离器

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for NB/T 42059-2015 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

October 27, 2015

Implementation date

March 1, 2016

Scope

NB/T 42059-2015 is the English-translated version of 交流电力系统金属氧化物避雷器用脱离器.

NB/T 42059-2015 is the Chinese standard "Disconnectors of metal-oxide surge arresters for a.c. systems".

Its scope clause reads: This standard specifies the technical requirements, test methods and inspection rules of disconnectors of metal-oxide surge arresters for a.c. systems with rated voltage greater than 1kV (hereinafter referred to as disconnectors).

This standard is only applicable to disconnectors designed to withdraw faulted surge arresters from a.c. systems and can be clearly identified. Its clauses include terms and definitions; marking.

Found what you need?

Document preview — NB/T 42059-2015

National Standard of the People's Republic of China

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Marking
  • 5 Standard ratings
  • 5.1 Nominal frequency
  • 5.2 Nominal discharge current
  • 6 Operating conditions
  • 6.1 Normal operating conditions
  • 6.2 Abnormal operating conditions
  • 7 Technical requirements
  • 7.1 General provisions
  • 7.2 Appearance requirements
  • 7.3 Mechanical properties
  • 7.3.1 General
  • 7.3.2 Bending load
  • 7.3.3 Tensile load
  • 7.3.4 Torsional load
  • 7.4 Sealing performance
  • 7.5 Current impulse withstand test
  • 7.5.1 High current impulse withstand test
  • 7.5.2 Long duration current impulse withstand test
  • 7.5.3 Lightning impulse discharge test
  • 7.6 Ampere-second characteristic test
  • 7.7 Operating duty test
  • 8 Test requirements
  • 8.1 Measuring equipment
  • 8.2 Test specimens
  • 8.3 Requirements of impulse current waveform and peak value
  • 8.4 Requirements of impulse voltage waveform and peak value
  • 8.5 Appearance inspection
  • 8.6 Mechanical tests
  • 8.6.1 Bending load test
  • 8.6.2 Tensile load test
  • 8.6.3 Torsional load test
  • 8.7 Sealing performance test
  • 8.7.1 Hot and cold water immersion test
  • 8.7.2 Temperature cycling test
  • 8.8 Current impulse withstand test
  • 8.8.1 High current impulse withstand test
  • 8.8.2 Long duration current impulse withstand test
  • 8.8.3 Lightning impulse discharge test
  • 8.9 Ampere-second characteristic test
  • 8.9.1 Preparation of test specimens
  • 8.9.2 Test procedures
  • 8.9.3 Test valuation
  • 8.10 Operating duty test
  • 8.10.1 Preparation of test specimen
  • 8.10.2 Test procedures
  • 8.10.3 Test valuation
  • 9 Inspection rules
  • 9.1 General provisions
  • 9.2 Type test
  • 9.3 Routine test and sampling test
  • 9.3.1 Routine test
  • 9.3.2 Sampling test
  • 10 Packaging, transportation and storage
  • 10.1 Packaging
  • 10.2 Technical documents provided together with product
  • 10.3 Transportation and storage
  • Annex A (Informative) Basic classification of disconnectors
  • Annex B (Normative) Abnormal operating conditions
  • Annex C (Informative) Table of bolt size and tightening torque
  • Annex D (Normative) Type test procedure of disconnector
  • Annex E (Informative) Comparison table of typical ampere-second characteristics of disconnector
  • Annex F (Informative) Comparison table of typical ampere-second characteristics of fuse or circuit breaker
  • Bibliography

1 Scope

This standard specifies the technical requirements, test methods and inspection rules of disconnectors of metal-oxide surge arresters for a.c. systems with rated voltage greater than 1kV (hereinafter referred to as disconnectors).

This standard is only applicable to disconnectors designed to withdraw faulted surge arresters from a.c. systems and can be clearly identified.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 191 Packaging - Pictorial marking for handling of goods

GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods - Test N: Change of temperature

GB/T 2900.12 Electrotechnical terminology - Surge arresters low-voltage surge protective devices and components

GB/T 2900.19 Electrotechnical terminology - High-voltage test technique and insulation co-ordination

GB 11032-2010 Metal oxide surge arresters without gaps for A. C. systems

GB/T 13384 General specifications for packing of mechanical and electrical product

GB/T 16927.1 High-voltage test techniques - Part 1: General definitions and test requirements

GB/T 16927.2 High-voltage test techniques - Part 2: Measuring systems

GB/T 16927.4 High voltage and high current test techniques - Part 4: Definitions and requirements for test currents and measuring systems

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 2900.12, GB/T 2900.19 and GB 11032-2010 as well as the following apply.

3.1 arrester disconnector

device that disconnects the arrester from the system when the arrester fails, which is used to prevent continuous system fault and can be clearly identified

Note: Generally, the disconnector does not be able to cut off the fault current flowing through the arrester, which is not the function of the device.

3.2

the curve of operation characteristic of disconnector envelope curve of the relationship between action current and action time of disconnector

4 Marking

The nameplate or enclosure of arrester disconnector shall include at least the following information, […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Similar standards

How to Download NB/T 42059-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 42059-2015

$429.00