Search GB/T
500 GB/T standards in English, from GB/T 3789.15-1991 to GB/T 3903.6-2017, in code order.
- GB/T 3789.15-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of output power$169.00
- GB/T 3789.16-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of pulse output power$169.00
- GB/T 3789.17-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of electrical intensity$169.00
- GB/T 3789.18-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of high frequency loss for interelectrode insulators$169.00
- GB/T 3789.19-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of frequency characteristic curve$169.00
- GB/T 3789.2-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid$169.00
- GB/T 3789.20-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 current cut-off voltage$169.00
- GB/T 3789.21-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic reference point$169.00
- GB/T 3789.22-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of vibration stability$169.00
- GB/T 3789.23-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability$169.00
- GB/T 3789.24-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of dual tone inter-modulation distortion of linear amplifier tubes$169.00
- GB/T 3789.25-1991Measurements of the electrical properties of transmitting tubes--Methods of measuring the vision output power$209.00
- GB/T 3789.26-1991Measurements of the electrical properties of transmitting tubes--Methods of measuring the power gain$169.00
- GB/T 3789.27-1991Measurements of the electrical properties of transmitting tubes--Methods of measuring the inter modulation distortion of a three tone signal$169.00
- GB/T 3789.28-1991Measurements of the electrical properties of transmitting tubes--Method of measuring the cross modulation$169.00
- GB/T 3789.29-1991Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency$169.00
- GB/T 3789.3-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of cathode emission current$169.00
- GB/T 3789.30-1991Measurements of the electrical properties of transmitting tubes--Methods of measuring the distortion in the chrominance signal due to the luminance (differential gain and differential phase)$169.00
- GB/T 3789.31-1991Measurements of the electrical properties of transmitting tubes--Methods of measuring the press of synchronizing pulse$169.00
- GB/T 3789.4-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of reverse grids current$169.00
- GB/T 3789.5-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current$169.00
- GB/T 3789.6-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of transconductance and amplification factor$169.00
- GB/T 3789.7-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of anode ion current$169.00
- GB/T 3789.8-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum anode dissipation power and anode overload dissipation power$169.00
- GB/T 3789.9-1991Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum grid dissipation power$169.00
- GB/T 3790-1995Methods of measurement for fluorescent display tubes$225.00
- GB/T 3791-1983Cassette for tape records dimensions and mechanical characteristics$195.00
- GB/T 3791-1999Cassette for tape records dimensions and mechanical characteristics$195.00
- GB/T 3792-2021Information and documentation—Resource description$1,895.00
- GB/T 3792.1-1983General bibliographical description$495.00
- GB/T 3792.1-2009Information and documentation - Resource description$495.00
- GB/T 3792.2-1985Bibliographical description for monographes$79.00
- GB/T 3792.2-2006Bibliographical description for monograph$285.00
- GB/T 3792.3-1985Bibliographical description for serials$79.00
- GB/T 3792.3-2009Bibliographic description - Part 3: Continuing resources$710.00
- GB/T 3792.4-1985Bibliographical description for non-book materials$79.00
- GB/T 3792.4-2009Bibliographical description - Part 4: Non-book materials$375.00
- GB/T 3792.5-1985Bibliographical description for archives$79.00
- GB/T 3792.6-1986Bibliographical description for cartographic materials$79.00
- GB/T 3792.6-2005Bibliographical description for cartographic materials$285.00
- GB/T 3792.7-1987Bibliographical description for chinese antiquarian books$79.00
- GB/T 3792.7-2008Bibliographical description for ancient Chinese books$345.00
- GB/T 3792.9-2009Bibliographic description-Part 9:Electronic resources$525.00
- GB/T 3793-1983Descriptive rules for entries of retrieval periodicals$79.00
- GB/T 3794-1983Standard for assessment of technical proficiency and acceptance for energy balance of industrial enterprise$79.00
- GB/T 3795-1996Ferromanganese$55.00
- GB/T 3795-2006Ferromanganese$55.00
- GB/T 3795-2014Ferromanganese$55.00
- GB/T 3797-1989Electric-driving controlgear--Part 2: Electric-driving controlgear incorporating electronic devices$315.00
- GB/T 3797-2005Electrical control assemblies$315.00
- GB/T 3797-2016Electrical control assemblies$315.00
- GB/T 3798-1983Technical requirements for automobiles being received from major overhaul$210.00
- GB/T 3798-2021Technical requirements for completion and acceptance of vehicle overhaul$210.00
- GB/T 3798.1-2005Technical requirements for completion and acceptance of vehicle overhaul - Part 1: Passenger vehicle$125.00
- GB/T 3798.2-2005Technical requirements for completion and acceptance of vehicle overhaul - Part 2: Goods vehicle$145.00
- GB/T 3799-1983Technical requirements for automobile engines being received from major overhaul$240.00
- GB/T 3799-2021Technical requirements for completion and acceptance of vehicle engines overhaul$240.00
- GB/T 3799.1-2005Technical requirements for completion and acceptance of commercial vehicle engines overhaul - Part 1: Gasoline engines$105.00
- GB/T 3799.2-2005Technical requirements for completion and acceptance of commercial vehicle engines overhaul - Part 2: Diesel engines$105.00
- GB/T 3804-20043.6 kV~40.5 kV high voltage a.c. load switches$650.00
- GB/T 3804-2017High voltage alternating current switches for rated voltage above 3.6 kV and less than 40.5 kV$650.00
- GB/T 3805-1993Extra-low voltage (ELV) limit values$135.00
- GB/T 3805-2008Extra-low voltage(ELV) - Limit values$135.00
- GB/T 3807-1994Polyvinyl chloride cellular plastic slippers$169.00
- GB/T 3808-1995Pendulum impact testing machines$195.00
- GB/T 3808-2002Verification of pendulum-type impact testing machines$535.00
- GB/T 3808-2018Verification of pendulum-type impact testing machines$535.00
- GB/T 3810-1996Test methods of ceramic tiles -- Part 1: Sampling and basis for acceptance$85.00
- GB/T 3810.1-1999Test methods of ceramic tiles-- Part 1: Sampling and basis for acceptance$105.00
- GB/T 3810.1-2006Test methods of ceramic tiles - Part 1: Sampling and basis for acceptance$105.00
- GB/T 3810.1-2016Test methods of ceramic tiles -- Part 1: Sampling and basis for acceptance$105.00
- GB/T 3810.10-1999Test methods of ceramic tiles-Part 10: Determination of moisture expansion$255.00
- GB/T 3810.10-2006Test methods of ceramic tiles - Part 10: Determination of moisture expansion$255.00
- GB/T 3810.10-2016Test methods of ceramic tiles -- Part 10: Determination of moisture expansion$70.00
- GB/T 3810.10-2026Test methods of ceramic tiles - Part 10: Determination of moisture expansion$255.00
- GB/T 3810.11-1999Test methods of ceramic tiles-- Part 11: Determination of crazing rasistance glazed tiles$55.00
- GB/T 3810.11-2006Test methods of ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles$55.00
- GB/T 3810.11-2016The methods of ceramic tiles -- Part 11: Determination of crazing resistance for glazed tiles$55.00
- GB/T 3810.12-1999Test methods of ceramic tiles-- Part 12: Determination of frost resistance$70.00
- GB/T 3810.12-2006Test methods of ceramic tiles - Part 12: Determination of frost resistance$70.00
- GB/T 3810.12-2016Test methods of ceramic tiles -- Part 12: Determination of frost resistance$70.00
- GB/T 3810.13-1999Test methods of ceramic tiles-- Part 13: Determination of chemical resistance$300.00
- GB/T 3810.13-2006Test methods of ceramic tiles - Part 13: Determination of chemical resistance$300.00
- GB/T 3810.13-2016Test methods of ceramic tiles - Part 13: Determination of chemical resistance$321.00
- GB/T 3810.13-2026Test methods of ceramic tiles - Part 13: Determination of chemical resistance$300.00
- GB/T 3810.14-1999Test methods of ceramic tiles-- Part 14: Determination of resistance stains$255.00
- GB/T 3810.14-2006Test methods of ceramic tiles - Part 14: Determination of resistance to stains$255.00
- GB/T 3810.14-2016Test methods of ceramic tiles - Part 14: Determination of resistance to stains$321.00
- GB/T 3810.14-2026Test methods of ceramic tiles - Part 14: Determination of resistance to stains$255.00
- GB/T 3810.15-1999Test methods of ceramic tiles-- Part 15: Determination of lead and cadmium given off by glazed tiles$195.00
- GB/T 3810.15-2006Test methods of ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles$195.00
- GB/T 3810.15-2016Test methods of ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles$90.00
- GB/T 3810.15-2026Test methods of ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles$195.00
- GB/T 3810.16-1999Test methods of ceramic tiles-- Part 16: Determination of small colour differences$70.00
- GB/T 3810.16-2006Test methods of ceramic tiles - Part 16: Determination of small colour differences$70.00
- GB/T 3810.16-2016Test methods of ceramic tiles -- Part 16: Determination of small colour differences$70.00
- GB/T 3810.18-2025Test method of ceramic tiles - Part 18: Determination of light reflectance value (LRV)$215.00
- GB/T 3810.2-1999Test methods of ceramic tiles-- Part 2: Determination of dimensions and surace quality$360.00
- GB/T 3810.2-2006Test methods of ceramic tiles - Part 2: Determination of dimensions and surface quality$360.00
- GB/T 3810.2-2016Test methods of ceramic tiles - Part 2: Determination of dimensions and surface quality$433.00
- GB/T 3810.2-2026Test methods of ceramic tiles - Part 2: Determination of dimensions and surface quality$360.00
- GB/T 3810.20-2025Test method of ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature$255.00
- GB/T 3810.3-1999Test methods of ceramic tiles-- Part 3: Determination of water absorption, Apparent porosity, apparent relative density and bulk density$255.00
- GB/T 3810.3-2006Test methods of ceramic tiles -- Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density$70.00
- GB/T 3810.3-2016Test method of ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density$255.00
- GB/T 3810.3-2026Test method of ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density$255.00
- GB/T 3810.4-1999Test methods of ceramic tiles-- Part 4: Determination of modulus of rupture and breaking strength$255.00
- GB/T 3810.4-2006Test methods of ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength$255.00
- GB/T 3810.4-2016Test methods of ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength$321.00
- GB/T 3810.4-2026Test methods of ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength$255.00
- GB/T 3810.5-1999Test methods of ceramic tiles-- Part 5: Determination of impace resistance by measurement of coefficient of restitution$105.00
- GB/T 3810.5-2006Test methods of ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution$105.00
- GB/T 3810.5-2016Test methods of ceramic tiles -- Part 5: Determination of impact resistance by measurement of coefficient of restitution$105.00
- GB/T 3810.6-1999Test methods of ceramic tiles-- Part 6: Determination of resistance to deep abrasion for unglazed tiles$90.00
- GB/T 3810.6-2006Test methods of ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles$90.00
- GB/T 3810.6-2016Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles$90.00
- GB/T 3810.7-1999Test methods of ceramic tiles-- Part 7: Determination of resistance to surface abrasion for glazed tiles$105.00
- GB/T 3810.7-2006Test methods of ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles$105.00
- GB/T 3810.7-2016Test methods of ceramic tiles -- Part 7: Determination of resistance to surface abrasion for glazed tiles$105.00
- GB/T 3810.8-1999Test methods of ceramic tiles-- Part 8: Determination of linear thermal expansion$55.00
- GB/T 3810.8-2006Test methods of ceramic tiles - Part 8: Determination of linear thermal expansion$55.00
- GB/T 3810.8-2016Test methods of ceramic tiles -- Part 8: Determination of linear thermal expansion$55.00
- GB/T 3810.9-1999Test methods of ceramic tiles-- Part 9: Determination of resistance to thermal shock$95.00
- GB/T 3810.9-2006Test methods of ceramic tiles - Part 9: Determination of resistance to thermal shock$95.00
- GB/T 3810.9-2016Test methods of ceramic tiles -- Part 9: Determination of resistance to thermal shock$95.00
- GB/T 3811-1983Design rules for cranes$125.00
- GB/T 3811-2008Design rules for cranes$125.00
- GB/T 3813-1983Determination of density of montane wax$79.00
- GB/T 3814-1983Determination of viscosity of montan wax$79.00
- GB/T 3815-1983Determination of loss in weight of montane wax$79.00
- GB/T 3816-1983Determination of asphalt in montane wax$79.00
- GB/T 3819-1997Textile fabrics. Determination of the recovery from creasing of a folded specimen by measuring the angle of recovery$85.00
- GB/T 3820-1997Determination of thickness of textiles and textile products$75.00
- GB/T 3821-1983Determination of cleanliness for small and medium power internal combustion engines$55.00
- GB/T 3821-2005Small and medium power internal combustion engine - Cleanliness measurement$55.00
- GB/T 3821-2015Small and medium power internal combustion engines - Cleanliness limits and measurement methods$55.00
- GB/T 3822-1983Ujimqin sheep$165.00
- GB/T 3822-2008Ujumuqin sheep$165.00
- GB/T 3822-2026Livestock and poultry breeds (synthetic lines) - Ujumuqin sheep$165.00
- GB/T 3823-1983Zhongwei goat$90.00
- GB/T 3823-2008Zhongwei goat$90.00
- GB/T 3825-1983Methods for chemical analysis of tungsten-molybdenum alloy--The EDTA volumetric method for the determination of molybdenum content$79.00
- GB/T 3830-1994Calendered film (sheet)from flexible PVC$300.00
- GB/T 3830-2008Calendered film and sheet from flexible polyvinyl chloride$300.00
- GB/T 3832-2008Broaches shanks$165.00
- GB/T 3832.1-1983Rectangular shanks for broaches--Types and main dimensions$79.00
- GB/T 3832.1-2004Broaches shanks - Part 1: Rectangular shanks$205.00
- GB/T 3832.2-1983Round shanks for broaches--Types and main dimensions$245.00
- GB/T 3832.2-2004Broaches shanks - Part 2: Round shanks$245.00
- GB/T 3832.3-1983Round follower end for broaches--Types and main dimensions$205.00
- GB/T 3832.3-2004Broaches shanks - Part 3: Round follower end$205.00
- GB/T 3836.1-2021Explosive atmospheres - Part 1: Equipment - General requirements$1,260.00
- GB/T 3836.11-2008Explosive atmospheres - Part 11: Equipment protected by flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap$800.00
- GB/T 3836.11-2017Explosive atmospheres - Part 11: Material characteristics for gas and vapour classification - Test methods and data$800.00
- GB/T 3836.11-2022Explosive atmospheres - Part 11: Material characteristics for gas and vapour classification - Test methods and data$800.00
- GB/T 3836.12-2008Explosive atmospheres - Part 12: Classification of gas or vapour mixtures according to their maximum experimental safe gaps and minimum igniting currents$515.00
- GB/T 3836.12-2019Explosive atmospheres -- Part 12: Material characteristics for combustible dusts -- Test methods$515.00
- GB/T 3836.13-2021Explosive atmospheres - Part 13: Equipment repair, overhaul, reclamation and modification$800.00
- GB/T 3836.14-2026Explosive atmospheres-Part 14:Classification of areas for explosive gas atmosphere$1,400.00
- GB/T 3836.15-2017Explosive atmospheres - Part 15: Electrical installations design, selection and erection$770.00
- GB/T 3836.16-2017Explosive atmospheres - Part 16: Electrical installations inspection and maintenance$485.00
- GB/T 3836.16-2022Explosive atmospheres - Part 16: Specification of electrical installations inspection and maintenance$485.00
- GB/T 3836.17-2019Explosive atmospheres -- Part 17: Equipment protection by pressurized room p and artificially ventilated room v$415.00
- GB/T 3836.18-2017Explosive atmospheres - Part 18: Intrinsically safe electrical systems$620.00
- GB/T 3836.18-2024Explosive atmospheres - Part 18: Intrinsically safe electrical systems$620.00
- GB/T 3836.2-2021Explosive atmospheres - Part 2: Equipment protection by flameproof enclosures 'd'$920.00
- GB/T 3836.20-2026Explosive atmospheres-Part 20:Equipment with separation elements or combined levels of protection$360.00
- GB/T 3836.21-2017Explosive atmospheres - Part 21: Application of quality systems for equipment manufacture$650.00
- GB/T 3836.21-2022Explosive atmospheres - Part 21: Application of quality management systems for Ex Product manufacture$650.00
- GB/T 3836.22-2017Explosive atmospheres - Part 22: Protection of equipment and transmission system using optical radiation$480.00
- GB/T 3836.22-2023Explosive atmospheres - Part 22: Protection of equipment and transmission system using optical radiation$480.00
- GB/T 3836.23-2017Explosive atmospheres - Part 23: Group I, category EPL Ma equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust$235.00
- GB/T 3836.24-2017Explosive atmospheres -- Part 24: Equipment protection by special protection 's'$415.00
- GB/T 3836.25-2019Explosive atmospheres -- Part 25: Requirements for process sealing between flammable process fluids and electrical systems$225.00
- GB/T 3836.26-2019Explosive atmospheres -- Part 26: Electrostatic hazards -- Guidance$1,470.00
- GB/T 3836.27-2019Explosive atmospheres -- Part 27: Electrostatic hazards -- Test$450.00
- GB/T 3836.28-2021Explosive atmospheres - Part 28: Non-electrical equipment for explosive atmospheres - Basic method and requirements$950.00
- GB/T 3836.29-2021Explosive atmospheres - Part 29: Non-electrical equipment for explosive atmospheres - Constructional safety 'c', control of ignition source 'b', liquid immersion 'k'$485.00
- GB/T 3836.3-2021Explosive atmospheres - Part 3: Equipment protection by increased safety 'e'$820.00
- GB/T 3836.30-2021Explosive atmospheres - Part 30: Equipment and components in explosive atmospheres in underground mines$530.00
- GB/T 3836.31-2021Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure 't'$240.00
- GB/T 3836.32-2021Explosive atmospheres - Part 32: Intrinsically safe systems with electronically controlled spark duration limitation$545.00
- GB/T 3836.33-2021Explosive atmospheres - Part 33: Equipment in adverse service conditions$270.00
- GB/T 3836.34-2021Explosive atmospheres - Part 34: Equipment assemblies$270.00
- GB/T 3836.35-2021Explosive atmospheres - Part 35: Classification of areas for explosive dust atmospheres$330.00
- GB/T 3836.36-2022Explosive atmospheres - Part 36: Electrical safety devices for the control of potential ignition sources from Ex Equipment$315.00
- GB/T 3836.4-2021Explosive atmospheres - Part 4: Equipment protection by intrinsic safety 'i'$1,500.00
- GB/T 3836.5-2017Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure 'p'$590.00
- GB/T 3836.5-2021Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure 'p'$590.00
- GB/T 3836.6-2017Explosive atmospheres -- Part 6: Equipment protection by liquid immersion 'o'$235.00
- GB/T 3836.7-2017Explosive atmospheres -- Part 7: Equipment protection by powder filling 'q'$235.00
- GB/T 3836.8-2021Explosive atmospheres - Part 8: Equipment protection by type of protection 'n'$390.00
- GB/T 3836.9-2021Explosive atmospheres - Part 9: Equipment protection by encapsulation 'm'$510.00
- GB/T 3837-20017/24 tapers for tool shanks for manual changing$165.00
- GB/T 3839-1983Technological principle and methods for enactment of local water pollutant emission standard$85.00
- GB/T 3840-1991Technical methods for making local emission standards of air pollutants$255.00
- GB/T 3841-1983Standard of smoke and dust emission for boiler$79.00
- GB/T 3845-1993Measurement method for pollutants at idle speed from vehicle with petrol engine$249.00
- GB/T 3846-1993Measurement method for smoke exhausted from vehicle with diesel engine at free acceleration. Filtermeter$209.00
- GB/T 3848-1983Hardmetals. Determination of(the magnetization) coercivity$85.00
- GB/T 3848-2017Hardmetals—Determination of (the magnetization) coercivity$85.00
- GB/T 3849-1983Hardmetals. Rockwell hardness(scale A) test method$79.00
- GB/T 3849.1-2015Hard metals -- Rockwell hardness test (scale A) -- Part 1: Test method$85.00
- GB/T 3849.2-2010Hard metals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks$145.00
- GB/T 3850-1983Impermeable sintered metal materials and hardmetals. Determination of density$75.00
- GB/T 3850-2015Impermeable sintered metal materials and hard metals -- Determination of density$75.00
- GB/T 3851-1983Hardmetals. Determination of transverse rupture strength$75.00
- GB/T 3851-2015Hard metals -- Determination of transverse rupture strength$75.00
- GB/T 3852-1997Types and dimension for coupling bores and their connection$265.00
- GB/T 3852-2008Types and dimensions for coupling bores and their connection$265.00
- GB/T 3852-2017Tapes and dimensions for coupling bores and their connection$265.00
- GB/T 3853-1998Displacement compressor. Acceptance tests$770.00
- GB/T 3853-2017Displacement compressors -- Acceptance tests$770.00
- GB/T 3854-1983Test method for hardness of fiber reinforced plastics by means of Barcol impresser$65.00
- GB/T 3854-2005Test method for hardness of reinforced plastics by means of Barcol impresser$65.00
- GB/T 3854-2017Test method for hardness of reinforced plastics by means of a Barcol impresser$65.00
- GB/T 3855-1983Test method for resin content of carbon fiber reinforced plastics$195.00
- GB/T 3855-2005Test method for resin content of carbon fiber reinforced plastics$85.00
- GB/T 3855-2026Test method for the resin content of carbon fibre reinforced plastics$195.00
- GB/T 3856-1983Test method for compression properties of unidirectional fiber reinforced plastics$85.00
- GB/T 3856-2005Test method for compression properties of unidirectional fiber reinforced plastics$85.00
- GB/T 3857-1987Test method for chemical resistance of glass fiber reinforced thermosetting plastics$105.00
- GB/T 3857-2005Test method for chemical resistance of glass fiber reinforced thermosetting plastics$105.00
- GB/T 3857-2017Test method for chemical resistance of glass fiber reinforced thermosetting plastics$105.00
- GB/T 3858-1993Hydrodynamic drive terminology$475.00
- GB/T 3858-2014Hydrodynamic drive—Terminology$475.00
- GB/T 3859.1-1993Semiconductor convertors. Specification of basic requirements$700.00
- GB/T 3859.1-2013Semiconductor converters -- General requirements and line commutated Converters -- Part 1-1: Specification of basic requirements$700.00
- GB/T 3859.2-1993Semiconductor convertors. Application guide$820.00
- GB/T 3859.2-2013Semiconductor converters -- General requirements and line commutated converters -- Part 1-2: Application guide$820.00
- GB/T 3859.3-1993Semiconductor convertors. Transformers and reactors$155.00
- GB/T 3859.3-2013Semiconductor converters -- General requirements and line commutated converters -- Part 1-3: Transformers and reactors$155.00
- GB/T 3859.4-2004Semiconductor converter - Self-commutated semiconductor converters including direct d.c. converters$225.00
- GB/T 3860-1995Documentation guidelines for determining the subjects and selecting the descriptors$285.00
- GB/T 3860-2009Guidelines for determining the subjects and selecting the descriptors$285.00
- GB/T 3863-1995Industrial oxygen$195.00
- GB/T 3863-2008Industrial oxygen$195.00
- GB/T 3863-2025Industrial oxygen$195.00
- GB/T 3864-1996Industrial nitrogen$210.00
- GB/T 3864-2008Industrial Nitrogen$210.00
- GB/T 3864-2025Industrial nitrogen$210.00
- GB/T 3865-1983The quality examination methods of Chinese pastry$79.00
- GB/T 3866-1983The quality inspection methods of the western pastry$79.00
- GB/T 3871.1-1993Test methods for agricultural wheeled and tracklaying tractors. Part 1: General requirements$70.00
- GB/T 3871.1-2006Agricultural tractors - Test procedures - Part 1: General requirements$70.00
- GB/T 3871.10-1993Test methods for agricultural wheeled and tracklaying tractors. Part 10: Low temperature starting tests$85.00
- GB/T 3871.10-2006Agricultural tractors -- Test procedures -- Part 10: Low temperature starting$85.00
- GB/T 3871.11-1993Test methods for agricultural wheeled and tracklaying tractors. Part 11: Suitability tests for hot atmosphere$55.00
- GB/T 3871.11-2005Agricultural tractors-Test procedures-Part 11:Suitability tests for hot atmosphere$55.00
- GB/T 3871.12-1993Test methods for agricultural wheeled and tracklying tractors. Part 12: Working tests$135.00
- GB/T 3871.12-2005Agricultural Tractors-Test procedures-Part 12:Working Tests$135.00
- GB/T 3871.13-2006Agricultural tractor -- Test procedures -- Part 13: Measurement of exhaust smoke$105.00
- GB/T 3871.14-2006Agricultural tractors -- Test procedures -- Part 14: Partial power PTO -- Non-mechanically transmitted power$55.00
- GB/T 3871.15-2006Agricultural tractors - Test procedures - Part 15: Centre of gravity$105.00
- GB/T 3871.15-2025Agricultural tractors - Test procedures - Part 15: Centre of gravity$470.00
- GB/T 3871.16-2006Agricultural tractors -- Test procedures -- Part 16: Axle power determination$105.00
- GB/T 3871.17-2006Agricultural tractors -- Test procedures -- Part 17: Engine air cleaner$95.00
- GB/T 3871.18-2006Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface$240.00
- GB/T 3871.18-2022Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface$240.00
- GB/T 3871.19-2006Agricultural tractors -- Test procedures -- Part 19: Steering capability of wheeled tractors$85.00
- GB/T 3871.2-1993Test methods for agricultural wheeled and tracklaying tractors. Part 2: Measurements of tractor parameters$85.00
- GB/T 3871.2-2006Agricultural tractors - Test procedures - Part 2: Measurements of tractor parameters$85.00
- GB/T 3871.20-2015Agricultural tractors—Test procedures—Part 20: Test methods of tractor bumpiness$85.00
- GB/T 3871.21-2015Agricultural tractors—Test procedures—Part 21: Stability$90.00
- GB/T 3871.3-1993Test methods for agricultural wheeled and tracklying tractors Part 3: PTO power tests$300.00
- GB/T 3871.3-2006Agricultural tractors -- Test procedures -- Part 3: Power tests for power take-off$105.00
- GB/T 3871.3-2025Agricultural tractors - Test procedures - Part 3: Power tests for power take-off$300.00
- GB/T 3871.4-1993Test methods for agricultural wheeled and tracklaying tractors. Part 4: Hydraulic lifting capacity and power tests$255.00
- GB/T 3871.4-2006Agricultural tractors - Test procedures - Part 4: Rear three- point linkage lifting capacity$255.00
- GB/T 3871.4-2025Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capacity$255.00
- GB/T 3871.5-1993Test methods for agricultural wheeled and tracklaying tractors. Part 5: Turning and clutch operating tests$240.00
- GB/T 3871.5-2006Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters$240.00
- GB/T 3871.5-2022Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters$240.00
- GB/T 3871.6-1993Test methods for agricultural wheeled and tracklying tractors. Part 6: Braking tests$215.00
- GB/T 3871.6-2006Agricultural tractors -- Test procedures -- Part 6: Determination of braking performance$215.00
- GB/T 3871.7-1993Test methods for agricultural wheeled and tracklaying tractors. Part 7: Measurements of operatorfield vision$255.00
- GB/T 3871.7-2006Agricultural tractors - Test procedures - Part 7: Operator field of vision$255.00
- GB/T 3871.7-2025Agricultural tractors - Test procedures - Part 7: Operator's field of vision to the front$255.00
- GB/T 3871.8-1993Test methods for agricultural wheeled and tracklaying tractors. Part 8: Measurements of noise$165.00
- GB/T 3871.8-2006Agricultural tractors -- Test procedures -- Part 8: Noise measurement$165.00
- GB/T 3871.9-1993Test methods for agricultural wheeled and tracklaying tractors. Part 9: Drawbar power tests$360.00
- GB/T 3871.9-2006Agricultural tractors -- Test procedures -- Part 9: Power tests for drawbar$155.00
- GB/T 3871.9-2025Agricultural tractors - Test procedures - Part 9: Power tests for drawbar$360.00
- GB/T 3873-1983General specifications for products packaging of communication equipments$175.00
- GB/T 3875-1983Tungsten sheet$145.00
- GB/T 3875-2006Tungsten sheet$145.00
- GB/T 3875-2017Tungsten sheet$145.00
- GB/T 3876-1983Molybdenum and molybdenum alloy sheet$145.00
- GB/T 3876-2007Molybdenum and molybdenum alloy plate and sheet$145.00
- GB/T 3876-2017Molybdenum and molybdenum alloy plate and sheet$145.00
- GB/T 3877-1983Molybdenum foil$125.00
- GB/T 3877-2006Molybdenum foil$125.00
- GB/T 3879-1983The material blanks of steel bonded carbide$195.00
- GB/T 3879-2008Material blanks of steel bonded carbide$195.00
- GB/T 3880-1997Aluminium and aluminium alloy rolled sheet$169.00
- GB/T 3880.1-2006Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 1: Technical conditions of delivery$455.00
- GB/T 3880.1-2012Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 1: Technical conditions of delivery$455.00
- GB/T 3880.1-2023Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 1: Technical conditions of delivery$455.00
- GB/T 3880.2-2006Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 2: Mechanical properties$515.00
- GB/T 3880.2-2012Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 2: Mechanical properties$515.00
- GB/T 3880.2-2024Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 2: Mechanical properties$515.00
- GB/T 3880.3-2006Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions$345.00
- GB/T 3880.3-2012Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions$345.00
- GB/T 3880.3-2024Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Dimensional tolerances$345.00
- GB/T 3882-1995Rolling bearings. Insert bearings and eccentric looking collars. Boundary dimensions$355.00
- GB/T 3882-2017Rolling bearings -- Insert bearings and eccentric looking collars -- Boundary dimensions$355.00
- GB/T 3883.1-2014Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools - Part 1: General requirements$1,535.00
- GB/T 3883.10-2007Safety of hand-held electric tools - Part 2: Particular requirements for planers$135.00
- GB/T 3883.11-2012Safety of hand-held electric tools - Part 2: Particular requirements for reciprocating saws (jig and sabre saws)$195.00
- GB/T 3883.13-1992Safety of handheld motor operated electric tools Part 2:Particular requirements for spray guns for non-flammable liquids$85.00
- GB/T 3883.14-2007Safety of hand-held electric tools - Part 2: Particular requirements for chain saws$135.00
- GB/T 3883.15-2007Safety of hand-held electric tools - Part 2: Particular requirements for hedge trimmers$135.00
- GB/T 3883.17-2005Safety of hand-held electric tools - Part 2: Particular requirements for routers and trimmers$135.00
- GB/T 3883.2-2012Safety of hand-held electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches$195.00
- GB/T 3883.201-2017Safety of motor-operated hand-held,transportable and garden tools—Part 2: Particular requirements for drills and impact drills$295.00
- GB/T 3883.201-2026Safety of motor-operated hand-held, transportable and garden tools—Part 201: Particular requirements for hand-held drills and impact drills$255.00
- GB/T 3883.202-2019Safety of motor-operated hand-held, transportable and garden tools -- Part 202: Particular requirements for hand-held screwdrivers and impact wrenches$255.00
- GB/T 3883.203-2025Safety of motor-operated hand-held, transportable and garden tools - Part 203: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders$830.00
- GB/T 3883.204-2019Safety of motor-operated hand-held, transportable and garden tools -- Part 204: Particular requirements for hand-held sanders and polishers other than disc type$225.00
- GB/T 3883.205-2019Safety of motor-operated hand-held, transportable and garden tools -- Part 205: Particular requirements for hand-held circular saws$535.00
- GB/T 3883.206-2025Safety of motor-operated hand-held, transportable and garden tools - Part 206: Particular requirements for hand-held hammers$770.00
- GB/T 3883.208-2023Safety of motor-operated hand-held, transportable and garden tools - Part 208: Particular requirements for hand-held shears and nibblers$215.00
- GB/T 3883.209-2021Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders$285.00
- GB/T 3883.210-2019Safety of motor-operated hand-held, transportable and garden tools -- Part 210: Particular requirements for hand-held planers$265.00
- GB/T 3883.211-2021Safety of motor-operated hand-held, transportable and garden tools - Part 211: Particular requirements for hand-held reciprocating saws$385.00
- GB/T 3883.215-2022Safety of motor-operated hand-held, transportable and garden tools - Part 215: Particular requirements for hand-held mixers$300.00
- GB/T 3883.217-2023Safety of motor-operated hand-held, transportable and garden tools - Part 217: Particular requirements for hand-held routers$385.00
- GB/T 3883.3-2007Safety of hand-held electric tools - Part 2: Particular requirements for grinders, polishers and disk-type sanders$135.00
- GB/T 3883.302-2021Safety of motor-operated hand-held, transportable and garden tools - Part 302: Particular requirements for transportable table saws$600.00
- GB/T 3883.305-2021Safety of motor-operated hand-held, transportable and garden tools - Part 305: Particular requirements for transportable bench grinders$385.00
- GB/T 3883.306-2017Safety of motor-operated hand-held,transportable and garden tools—Part 3: Particular requirements for transportable diamond drills with liquid systems$205.00
- GB/T 3883.306-2026Safety of motor-operated hand-held,transportable and garden tools—Part 306: Particular requirements for transportable diamond drills with liquid system$255.00
- GB/T 3883.309-2021Safety of motor-operated hand-held, transportable and garden tools - Part 309: Particular requirements for transportable mitre saws$500.00
- GB/T 3883.311-2019Safety of motor-operated hand-held, transportable and garden tools -- Part 311: Particular requirements for transportable cut-off machines$335.00
- GB/T 3883.4-2012Safety of hand-held electric tools - Part 2: Particular requirements for non-disc type sanders and polishers$195.00
- GB/T 3883.401-2023Safety of motor-operated hand-held, transportable and garden tools - Part 401: Particular requirements for chain saws$800.00
- GB/T 3883.403-2017Safety of motor-operated hand-held, transportable and garden tools—Part 4: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers$185.00
- GB/T 3883.403-2026Safety of motor-operated hand-held, transportable and garden tools—Part 403: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws$255.00
- GB/T 3883.404-2025Safety of motor-operated hand-held, transportable and garden tools - Part 404: Particular requirements for pedestrian controlled walk-behind lawnmowers$1,220.00
- GB/T 3883.405-2025Safety of motor-operated hand-held, transportable and garden tools - Part 405: Particular requirements for grass shears$770.00
- GB/T 3883.5-2007Safety of hand-held electric tools - Part 2: Particular requirements for circular saws$135.00
- GB/T 3883.6-2012Safety of hand-held electric tools - Part 2: Particular requirements for drills and impact drills$195.00
- GB/T 3883.7-2012Safety of hand-held electric tools - Part 2: Particular requirements for hammers$195.00
- GB/T 3883.8-2012Safety of hand-held electric tools - Part 2: Particular requirements for shears and nibblers$195.00
- GB/T 3883.9-2012Safety of hand-held electric tools - Part 2: Particular requirements for tappers$195.00
- GB/T 3884.1-1983Methods for chemical analysis of copper concentrates--The thiosulfate-iodometric method for the determination of copper content$360.00
- GB/T 3884.1-2000Methods for chemical analysis of copper concentrates. Determination of copper content$360.00
- GB/T 3884.1-2012Methods for chemical analysis of copper concentrates - Part 1: Determination of copper content - Iodine titration method$360.00
- GB/T 3884.1-2025Methods for chemical analysis of copper concentrates - Part 1: Determination of copper content - Iodine titration method and electrogravimetric method$360.00
- GB/T 3884.10-1983Methods for chemical analysis of copper concentrates--The silver diethyl dithiocarbamate photometric method for the determination of arsenic content$105.00
- GB/T 3884.10-2000Methods for chemical analysis of copper concentrates Determination of antimony content$85.00
- GB/T 3884.10-2012Methods for chemical analysis of copper concentrates -- Part 10: Determination of Antimony content -- Hydride generation atomic fluorescence spectrometry method$105.00
- GB/T 3884.11-1983Methods for chemical analysis of copper concentrates--The flame atomic absorption spectrophotometric method for the determination of cadmium content$105.00
- GB/T 3884.11-2005Methods for chemical analysis of copper concentrates-Determination of mercury content-Cold atomic absorption spectrometric method$105.00
- GB/T 3884.11-2026Methods for chemical analysis of copper concentrates - Part 11: Determination of mercury content - Cold atomic absorption spectrometry and direct solid sampling method$255.00
- GB/T 3884.12-1983Methods for chemical analysis of copper concentrates--The flame atomic absorption spectrophotometric method for the determination of zinc content$240.00
- GB/T 3884.12-2010Methods for chemical analysis of copper concentrates - Part 12: Determination of fluoride content and chloride content - Ion chromatography$240.00
- GB/T 3884.12-2023Methods for chemical analysis of copper concentrates—Part 12:Determination of fluoride and chloride contents—Ion chromatography and potentiometric titration$240.00
- GB/T 3884.13-1983Methods for chemical analysis of copper concentrates--The EDTA-volumetric method for the determination of zinc content$315.00
- GB/T 3884.13-2012Methods for chemical analysis of copper concentrates -- Part 13: Determination of copper -- Electrogravimetric method$315.00
- GB/T 3884.14-1986Methods for chemical analysis of copper concentrates--The fire assaying methods for the determination of gold and silver content$465.00
- GB/T 3884.14-2012Methods for chemical analysis of copper concentrates -- Part 14: Determination of gold and silver -- Fire assay gravimetric and flame atomic absorption spectrometric method$465.00
- GB/T 3884.15-1986Methods for chemical analysis of copper concentrates--The flame atomic absorption spectrophotometric method for the determination of silver content$255.00
- GB/T 3884.15-2014Methods for chemical analysis of copper concentrates - Part 15: Determination of iron content - Potassium dichromate titration method$255.00
- GB/T 3884.15-2025Methods for chemical analysis of copper concentrate — Part 15: Determination of total iron and ferriferrous oxide contents$255.00
- GB/T 3884.16-2014Methods for chemical analysis of copper concentrates - Part 16: Determination of silicon dioxide content - K2SiF6 titrimetric method and gravimetric method$145.00
- GB/T 3884.16-2025Methods for chemical analysis of copper concentrates - Part 16: Determination of silicon dioxide content - Potassium fluosilicate titrimetric method and gravimetric method$240.00
- GB/T 3884.17-2014Methods for chemical analysis of copper concentrates - Part 17: Determination of aluminium oxide content - Chromazurol S spectrophotometric method and fluoride salts device-Na2EDTA titrimetric method$145.00
- GB/T 3884.18-2014Methods for chemical analysis of copper concentrates - Part 18: Determination of arsenic, antimony, bismuth, lead, zinc, nickel, cadmium, cobalt, magnesium oxide, calcium oxide contents - Inductively coupled plasma atomic emission spectrometry$210.00
- GB/T 3884.18-2023Methods for chemical analysis of copper concentrates—Part 18:Determination of arsenic,antimony,bismuth,lead,zinc,nickel,cadmium,cobalt,chromium,aluminum oxide,magnesium oxide and calcium oxide contents—Inductively coupled plasma atomic emission spectrometry$210.00
- GB/T 3884.19-2017Methods for chemical analysis of copper concentrates - Part 19: Determination of thallium content - Inductively coupled plasma mass spectrometry$85.00
- GB/T 3884.2-1983Methods for chemical analysis of copper concentrates--The wet chemical and fire-assaying methods for the determination of gold and silver content$560.00
- GB/T 3884.2-2000Methods for chemical analysis of copper concentrates. Determination of gold and silver content$560.00
- GB/T 3884.2-2012Methods for chemical analysis of copper concentrates - Part 2: Determination of gold and silver contents - Flame atomic absorption spectrometric method and fire assay method$75.00
- GB/T 3884.2-2025Methods for chemical analysis of copper concentrates - Part 2: Determination of gold and silver contents - Flame atomic absorption spectrmetric method and fire assay method$560.00
- GB/T 3884.20-2018Methods for chemical analysis of copper concentrates—Part 20:Determination of mercury content—Solid sampling and direct mercury analysis method$85.00
- GB/T 3884.21-2018Methods for chemical analysis of copper concentrates-Part 21:Determination of copper,sulfur,lead,zinc,iron, aluminium,calcium,magnesium,manganese content-Wavelength dispersive X-ray fluorescence spectrometric method$145.00
- GB/T 3884.3-1983Methods for chemical analysis of copper concentrates--The combustion-volumetric method for the determination of sulfur content$240.00
- GB/T 3884.3-2000Methods for chemical analysis of copper concentrates. Determination of sulfur content$240.00
- GB/T 3884.3-2012Methods for chemical analysis of copper concentrates - Part 3: Determination of sulfur content - Gravimetric method and Combustion-titration method$240.00
- GB/T 3884.3-2025Methods for chemical analysis of copper concentrates - Part 3: Determination of sulfur content - Gravimetric method and combustion-titration method$240.00
- GB/T 3884.4-1983Methods for chemical analysis of copper concentrates--The gravimetric method for the determination of sulfur content$195.00
- GB/T 3884.4-2000Methods for chemical analysis of copper concentrates Determination of magnesium oxide content$195.00
- GB/T 3884.4-2012Methods for chemical analysis of copper concentrates - Part 4: Determination of magnesium oxide content - Flame atomic absorption spectrophotometry method$195.00
- GB/T 3884.4-2025Methods for chemical analysis of copper concentrates — Part 4: Determination of lead, zinc, cadmium, nickel and magnesium oxide contents — Flame atomic absorption spectrometry method$195.00
- GB/T 3884.5-1983Methods for chemical analysis of copper concentrates--The flame atomic absorption spectrophotometric method for the determination of magnesium oxide content$105.00
- GB/T 3884.5-2000Methods for chemical analysis of copper concentrates Determination of fluorine content$105.00
- GB/T 3884.5-2012Methods for chemical analysis of copper concentrates - Part 5: Determination of fluoride content - Ion selective electrode method$105.00
- GB/T 3884.6-1983Methods for chemical analysis of copper concentrates--The ion-selective electrode method for the determination of fluorine content$125.00
- GB/T 3884.6-2000Methods for chemical analysis of copper concentrates Determination of lead, zinc, cadmium and nickel contents$209.00
- GB/T 3884.6-2012Methods for chemical analysis of copper concentrates -- Part 6: Determination of lead, zinc, cadmium and nickel content -- Flame atomic absorption spectrometry method$125.00
- GB/T 3884.7-1983Methods for chemical analysis of copper concentrates--The flame atomic absorption spectrophotometric method for the determination of lead content$195.00
- GB/T 3884.7-2000Methods for chemical analysis of copper concentrates Determination of lead content$195.00
- GB/T 3884.7-2012Methods for chemical analysis of copper concentrates - Part 7: Determination of lead content - Na2EDTA titration method$195.00
- GB/T 3884.7-2025Methods for chemical analysis of copper concentrates — Part 7: Determination of lead and zinc contents — Na2EDTA titration method$195.00
- GB/T 3884.8-1983Methods for chemical analysis of copper concentrates--The EDTA-volumetric method for the determination of lead content$105.00
- GB/T 3884.8-2000Methods for chemical analysis of copper concentrates Determination of zinc content$169.00
- GB/T 3884.8-2012Methods for chemical analysis of copper concentrates -- Part 8: Determination of zinc content -- Na2EDTA titration method$105.00
- GB/T 3884.9-1983Methods for chemical analysis of copper concentrates--The potassium bromate volumetric method for the determination of arsenic content$300.00
- GB/T 3884.9-2000Methods for chemical analysis of copper concentrates Determination of arsenic and bismuth content$300.00
- GB/T 3884.9-2012Methods for chemical analysis of copper concentrates - Part 9: Determination of arsenic and bismuth contents - Hydride generation-atomic fluorescence spectrometry method - The potassium bromate titration method and the silver diethyl dithiocarbamate ph$300.00
- GB/T 3884.9-2025Methods for chemical analysis of copper concentrates — Part 9: Determination of arsenic, antimony and bismuth contents$300.00
- GB/T 3885.1-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The atomic absorption spectrophotometric method for the determination of lithium oxide, sodium oxide and potassium oxide contents$79.00
- GB/T 3885.10-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The ion selective electrode method for the determination of fluorine content in lepidolite concentrates$79.00
- GB/T 3885.11-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The persulfate oxidation photometric method for the determination of manganous oxide content$79.00
- GB/T 3885.12-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The gravimetric method for the determination of loss on ignition$79.00
- GB/T 3885.2-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The atomic absorption spectrophotometric method for the determination of rubidium oxide and caesium oxide contents$79.00
- GB/T 3885.3-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The gravimetric-molybdenum blue photometric method for the determination of silicon dioxide content$79.00
- GB/T 3885.4-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The EDTA volumetric method for the determination of aluminum oxide content$79.00
- GB/T 3885.5-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The EDTA volumetric method for the determination of ferric oxide content$79.00
- GB/T 3885.6-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The O-phenanthroline photometric method for the determination of ferric oxide content$79.00
- GB/T 3885.7-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The molybdenum blue photometric method for the determination of phosphorus pentoxide content$79.00
- GB/T 3885.8-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The chromazurol S and cetyl trimethyl ammonium bromide photometric method for the determination of beryllium oxide content$79.00
- GB/T 3885.9-1983Methods for chemical analysis of spodumenite and lepidolite concentrates--The atomic absorption spectrophotometric method for the determination of calcium oxide and magnesium oxide contents$79.00
- GB/T 3886.1-2001Semiconductor power converters for speed electrical power drive systems - Part 1: General requirements on the provisions of the DC motor drive rating$315.00
- GB/T 3893-1998Shipbuilding and marine structures--Deck machinery--Terminology$115.00
- GB/T 3893-2008Shipbuilding and marine structures -- Deck machinery -- Vocabulary and symbols$115.00
- GB/T 3894-2008Shipbuilding -- Indication of details on arrangement plans of ships$205.00
- GB/T 3894.1-1983Shipbuilding -- Indication of details on arrangement plans of ships$329.00
- GB/T 3894.2-1983Figurations and symbols on the arrangement plans of ships--Furnitures in accommodation$79.00
- GB/T 3894.3-1983Figurations and symbols on the arrangement plans of ships--Equipments in commissary space and sanitary space$79.00
- GB/T 3894.4-1983Figurations and symbols on the arrangement plans of ships--Navigation, lights and workshop equipments$79.00
- GB/T 3894.5-1983Figurations and symbols on the arrangement plans of ships--Stairs and bulwarks$79.00
- GB/T 3894.6-1984Figurations and symbols on the arrangement plans of ships. Life-saving apparatus$79.00
- GB/T 3894.7-1983Figurations and symbols on the arrangement plans of ships--Mooring equipment$79.00
- GB/T 3894.8-1985Figure symbols on the arrangement plant of ship deck machinery$79.00
- GB/T 3894.9-1986Graphical symbols on the arrangement plan of ship. Cargo handling gear$85.00
- GB/T 3895-1983Graphical symbols for Ship deck covering and insulation materials$79.00
- GB/T 3898-1983Magnetic compasses for sea navigation--Vocabulary$285.00
- GB/T 3898-2008Magnetic compasses for sea navigation -- Vocabulary$285.00
- GB/T 3899.1-2007Commercial dyestuffs for textile - The principle of nomenclature$105.00
- GB/T 3899.2-2007Commercial dyestuffs for textile - Standard colour cards for the nomenclature$105.00
- GB/T 3900-1991Tyre valve series$600.00
- GB/T 3900-1997Tyre valve series$600.00
- GB/T 3900-2003Tyre valve series$600.00
- GB/T 3900-2012Tyre valve series$600.00
- GB/T 3900-2020Tyre valve series$600.00
- GB/T 3903.1-1994General test method for footwear-Test method of flexing resistance$70.00
- GB/T 3903.1-2008Footwear - General test methods - Flexing resistance$70.00
- GB/T 3903.1-2017Footwear - Test methods for whole shoe - Flexing resistance$70.00
- GB/T 3903.10-2005Footwear -- Test methods for insoles -- Dimensional stability$55.00
- GB/T 3903.11-2005Footwear -- Test methods for insoles, lining and insocks -- Perspiration resistance$55.00
- GB/T 3903.12-2005Footwear - Test methods for outsoles - Tear strength$165.00
- GB/T 3903.12-2021Footwear - Test methods for outsoles - Tear strength$165.00
- GB/T 3903.13-2005Footwear - Test methods for outsoles - Dimensional stability$85.00
- GB/T 3903.13-2020Footwear - Test methods for outsoles - Dimensional stability$85.00
- GB/T 3903.14-2005Footwear - Test methods for outsoles - Needle tear strength$90.00
- GB/T 3903.14-2021Footwear - Test methods for outsoles - Needle tear strength$90.00
- GB/T 3903.15-2008Footwear -- Test methods for uppers, lining and insocks -- Thermal insulation$75.00
- GB/T 3903.16-2008Footwear -- Test methods for uppers, linings and insocks -- Abrasion resistance$55.00
- GB/T 3903.17-2008Footwear -- Test methods for uppers -- Water resistance$75.00
- GB/T 3903.18-2008Footwear -- Test methods for uppers -- High temperature behaviour$55.00
- GB/T 3903.19-2008Footwear -- Test methods for accessories: Metallic accessories -- Corrosion resistance$35.00
- GB/T 3903.2-1994General test method for footwear - Test method of abrasion resistance$65.00
- GB/T 3903.2-2008Footwear - General test methods - Abrasion resistance$65.00
- GB/T 3903.2-2017Footwear - Test methods for whole shoe - Abrasion resistance$65.00
- GB/T 3903.20-2008Footwear -- Test methods for accessories: Touch and close fasteners -- Peel strength before and after repeated closing$35.00
- GB/T 3903.21-2008Footwear -- Test methods for accessories: Touch and close fasteners -- Shear strength before and after repeated closing$35.00
- GB/T 3903.22-2008Footwear -- Test methods for outsoles -- Tensile strength and elongation$55.00
- GB/T 3903.23-2008Footwear -- Test methods for heels and top pieces -- Top piece retention strength$75.00
- GB/T 3903.24-2008Footwear -- Test methods for heels -- Heel pin holding strength$75.00
- GB/T 3903.24-2026Footwear - Test methods for heels - Heel pin holding strength$195.00
- GB/T 3903.25-2008Footwear - Test methods for whole shoe - Heel attachment$120.00
- GB/T 3903.25-2021Footwear - Test methods for whole shoe - Heel attachment$120.00
- GB/T 3903.26-2008Footwear - Test methods for stiffeners and toe puffs - Bondability$150.00
- GB/T 3903.26-2020Footwear - Test methods for stiffeners and toepuffs - Bondability$150.00
- GB/T 3903.27-2008Footwear -- Test methods for stiffeners and toe puffs -- Mechanical characteristics$125.00
- GB/T 3903.28-2008Footwear -- Test methods for outsoles -- Compression energy$55.00
- GB/T 3903.29-2008Footwear - Test methods for outsoles - Split tear strength and delamination resistance$105.00
- GB/T 3903.29-2022Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance$105.00
- GB/T 3903.3-1994General test method for footwear-Test methood of peeling strength$95.00
- GB/T 3903.3-2011Footwear - General test methods - Peeling strength$95.00
- GB/T 3903.30-2008Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content$65.00
- GB/T 3903.30-2015Footwear -- Test method for outsoles, insoles, linings and insocks -- Water soluble content$65.00
- GB/T 3903.31-2008Footwear -- Test methods for insoles -- Abrasion resistance$75.00
- GB/T 3903.32-2008Footwear - Test methods for insoles - Resistance to stitch tear$55.00
- GB/T 3903.33-2008Footwear - Test methods for insoles and insocks - Water absorption and desorption$105.00
- GB/T 3903.33-2019Footwear - Test methods for insoles and insocks - Water absorption and desorption$105.00
- GB/T 3903.34-2008Footwear - Test methods for shanks - Longitudinal stiffness$85.00
- GB/T 3903.34-2019Footwear - Test methods for shanks - Longitudinal stiffness$85.00
- GB/T 3903.35-2008Footwear -- Test methods for shanks -- Fatigue resistance$15.00
- GB/T 3903.36-2008Footwear -- Test methods for accessories: shoe laces -- Abrasion resistance$75.00
- GB/T 3903.37-2008Footwear -- Test methods for insoles and insocks -- Static friction$115.00
- GB/T 3903.38-2008Footwear -- Test methods for uppers -- Resistance to damage on lasting$55.00
- GB/T 3903.39-2008Footwear - Test methods for uppers - Delamination resistance$105.00
- GB/T 3903.39-2019Footwear - Test methods for uppers - Delamination resistance$105.00
- GB/T 3903.4-1994General test method for footwear-Test method of hardness$70.00
- GB/T 3903.4-2008Footwear - General test methods - Hardness$70.00
- GB/T 3903.4-2017Footwear - Test methods for whole shoe - Hardness$70.00
- GB/T 3903.40-2008Footwear -- Test methods for uppers -- Deformability$75.00
- GB/T 3903.41-2008Footwear - Test methods for uppers and lining - Flex resistance$105.00
- GB/T 3903.41-2019Footwear - Test methods for uppers and lining - Flex resistance$105.00
- GB/T 3903.42-2008Footwear - Test methods for uppers, lining and insocks - Colour migration$75.00
- GB/T 3903.42-2019Footwear - Test methods for uppers, lining and insocks - Colour migration$75.00
- GB/T 3903.43-2008Footwear -- Test methods for uppers, lining and insocks -- Seam strength$75.00
- GB/T 3903.43-2019Footwear—Test methods for uppers, lining and insocks—Seam strength$185.00
- GB/T 3903.5-1995General test method for footwear--Test method of appearance$35.00
- GB/T 3903.5-2011Footwear - General test methods - Appearance quality$35.00
- GB/T 3903.6-2005Footwear - Determination resistance$240.00
- GB/T 3903.6-2017Footwear - Test methods for whole shoe - Slip performance$240.00
All GB/T ranges
- GB/T 1.1-1993 – GB/T 245-2016
- GB/T 246-1982 – GB/T 601-2002
- GB/T 601-2016 – GB/T 915-1995
- GB/T 915-2010 – GB/T 1303-1977
- GB/T 1303.1-1998 – GB/T 1617-1989
- GB/T 1617-2002 – GB/T 1927.9-2021
- GB/T 1928-1991 – GB/T 2399-2003
- GB/T 2399-2014 – GB/T 2590.6-1981
- GB/T 2590.7-1981 – GB/T 2900.17-1994
- GB/T 2900.17-2009 – GB/T 3048.4-1994
- GB/T 3048.4-2007 – GB/T 3280-1992
- GB/T 3280-2007 – GB/T 3533.2-1984
- GB/T 3533.2-2017 – GB/T 3789.14-1991
- GB/T 3789.15-1991 – GB/T 3903.6-2017
- GB/T 3903.6-2024 – GB/T 4148-1993
- GB/T 4148-2003 – GB/T 4334-2008
- GB/T 4334-2020 – GB/T 4649-2008
- GB/T 4649-2018 – GB/T 4752-1984
- GB/T 4752-2002 – GB/T 4955-1997
- GB/T 4955-2005 – GB/T 5033-1985
- GB/T 5034-1985 – GB/T 5169.8-1985
- GB/T 5169.9-1993 – GB/T 5340.3-2006
- GB/T 5341-1985 – GB/T 5585.1-2005
- GB/T 5585.1-2018 – GB/T 5824-2008
- GB/T 5824-2021 – GB/T 6102.2-1985
- GB/T 6102.2-2009 – GB/T 6323.4-1994
- GB/T 6323.5-1994 – GB/T 6553-2014
- GB/T 6553-2024 – GB/T 6742-2007
- GB/T 6743-1986 – GB/T 6988.6-1993
- GB/T 6989-1986 – GB/T 7284-1998
- GB/T 7284-2016 – GB/T 7596-2000
- GB/T 7596-2008 – GB/T 7739.6-2021
- GB/T 7739.7-2007 – GB/T 8059.2-1987
- GB/T 8059.2-1995 – GB/T 8303-1987
- GB/T 8303-2002 – GB/T 8638.1-1988
- GB/T 8638.10-1988 – GB/T 8995-2026
- GB/T 8996-1988 – GB/T 9275-1988
- GB/T 9275-2008 – GB/T 9652.1-1997
- GB/T 9652.1-2007 – GB/T 9938-2013
- GB/T 9941-1988 – GB/T 10178-1988
- GB/T 10178-2006 – GB/T 10512-1989
- GB/T 10512-2008 – GB/T 10870-1989
- GB/T 10870-2001 – GB/T 11168-2009
- GB/T 11170-1989 – GB/T 11464-2013
- GB/T 11465-1989 – GB/T 11896-1989
- GB/T 11897-1989 – GB/T 12196-1990
- GB/T 12197-1990 – GB/T 12510-2015
- GB/T 12511-1990 – GB/T 12690.6-2017
- GB/T 12690.7-1990 – GB/T 12959-2008
- GB/T 12959-2024 – GB/T 13210-2024
- GB/T 13211-1991 – GB/T 13459-1992
- GB/T 13459-2008 – GB/T 13663.2-2018
- GB/T 13663.3-2018 – GB/T 13869-2008
- GB/T 13869-2017 – GB/T 14074.2-1993
- GB/T 14074.3-1993 – GB/T 14328.4-1993
- GB/T 14329-2008 – GB/T 14506.15-1993
- GB/T 14506.15-2010 – GB/T 14684-2011
- GB/T 14684-2022 – GB/T 14926.21-1994
- GB/T 14926.21-2001 – GB/T 15079.3-1994
- GB/T 15079.4-1994 – GB/T 15328-1994
- GB/T 15328-2009 – GB/T 15590-1995
- GB/T 15590-2008 – GB/T 15806-1995
- GB/T 15806-2006 – GB/T 16085-1995
- GB/T 16086-1995 – GB/T 16478.4-1996
- GB/T 16478.5-1996 – GB/T 16674.2-2016
- GB/T 16674.3-2023 – GB/T 16895.1-2008
- GB/T 16895.10-2001 – GB/T 17149.4-1997
- GB/T 17149.5-1997 – GB/T 17367-1998
- GB/T 17368-1998 – GB/T 17607-1998
- GB/T 17608-1998 – GB/T 17783-1999
- GB/T 17783-2019 – GB/T 17980.143-2004
- GB/T 17980.144-2004 – GB/T 18122-2000
- GB/T 18123-2000 – GB/T 18311.2-2026
- GB/T 18311.20-2007 – GB/T 18508-2001
- GB/T 18508-2014 – GB/T 18779.3-2023
- GB/T 18779.4-2020 – GB/T 18932.11-2002
- GB/T 18932.12-2002 – GB/T 19208-2003
- GB/T 19208-2008 – GB/T 19449.4-2013
- GB/T 19450-2004 – GB/T 19699-2023
- GB/T 19700-2005 – GB/T 19952-2005
- GB/T 19953-2005 – GB/T 20168-2006
- GB/T 20168-2017 – GB/T 20443-2006
- GB/T 20444-2006 – GB/T 20736-2006
- GB/T 20736-2025 – GB/T 20975.15-2008
- GB/T 20975.15-2020 – GB/T 21283.5-2008
- GB/T 21283.6-2015 – GB/T 21623-2008
- GB/T 21624-2008 – GB/T 21930-2008
- GB/T 21931.1-2008 – GB/T 22260-2023
- GB/T 22261-2008 – GB/T 22527-2008
- GB/T 22528-2008 – GB/T 22838.2-2009
- GB/T 22838.3-2009 – GB/T 23274.7-2009
- GB/T 23274.8-2009 – GB/T 23576-2024
- GB/T 23577-2009 – GB/T 23901.1-2009
- GB/T 23901.1-2019 – GB/T 24301-2009
- GB/T 24302-2009 – GB/T 24639-2009
- GB/T 24640-2009 – GB/T 24975.3-2010
- GB/T 24975.4-2010 – GB/T 25271-2010
- GB/T 25272-2010 – GB/T 25707-2010
- GB/T 25707-2025 – GB/T 26052-2010
- GB/T 26052-2022 – GB/T 26412-2010
- GB/T 26413-2010 – GB/T 26803.1-2011
- GB/T 26803.2-2011 – GB/T 27534.2-2025
- GB/T 27534.3-2011 – GB/T 27919-2011
- GB/T 27920.1-2011 – GB/T 28410-2012
- GB/T 28410-2025 – GB/T 28819-2023
- GB/T 28821-2012 – GB/T 29229-2012
- GB/T 29230.1-2012 – GB/T 29618.1-2013
- GB/T 29618.1-2017 – GB/T 30095-2013
- GB/T 30096-2013 – GB/T 30420.1-2013
- GB/T 30420.2-2019 – GB/T 30845.2-2021
- GB/T 30846-2014 – GB/T 31230.3-2014
- GB/T 31230.4-2014 – GB/T 31586.2-2015
- GB/T 31587-2015 – GB/T 32065.8-2020
- GB/T 32065.9-2019 – GB/T 32413-2015
- GB/T 32414-2015 – GB/T 32800.5-2023
- GB/T 32800.6-2023 – GB/T 33162-2016
- GB/T 33163-2016 – GB/T 33525-2025
- GB/T 33526-2017 – GB/T 33887-2017
- GB/T 33888-2017 – GB/T 34308.2-2017
- GB/T 34308.3-2017 – GB/T 34690.7-2017
- GB/T 34690.8-2017 – GB/T 35111-2017
- GB/T 35112-2017 – GB/T 35521-2017
- GB/T 35522-2017 – GB/T 35966-2018
- GB/T 35967-2018 – GB/T 36410.4-2018
- GB/T 36410.5-2018 – GB/T 36818-2018
- GB/T 36819-2018 – GB/T 37270.2-2018
- GB/T 37270.3-2018 – GB/T 37721-2019
- GB/T 37722-2019 – GB/T 38136-2019
- GB/T 38137-2019 – GB/T 38593-2020
- GB/T 38594-2020 – GB/T 39039-2020
- GB/T 39040-2020 – GB/T 39493-2020
- GB/T 39494-2020 – GB/T 39914-2021
- GB/T 39915-2021 – GB/T 40392-2021
- GB/T 40393-2021 – GB/T 40837-2021
- GB/T 40838-2021 – GB/T 41329-2022
- GB/T 41330-2022 – GB/T 41805-2022
- GB/T 41806-2022 – GB/T 42272-2022
- GB/T 42273-2022 – GB/T 42890-2023
- GB/T 42891-2023 – GB/T 43448-2023
- GB/T 43449-2023 – GB/T 44014-2024
- GB/T 44020-2024 – GB/T 44596-2024
- GB/T 44597-2024 – GB/T 45169-2025
- GB/T 45170-2024 – GB/T 45677-2025
- GB/T 45678-2025 – GB/T 46128-2025
- GB/T 46129-2025 – GB/T 46594-2026
- GB/T 46595-2025 – GB/T 47055-2026
- GB/T 47056-2026 – GB/T 47534-2026
- GB/T 47535-2026 – GB/T 48000.3-2026
- GB/T 48000.4-2026 – GB/T 48446-2026
- GB/T 48447-2026 – GB/T 51013-2014
- GB/T 51015-2014 – GB/T 30685-2024
- GB/T 30819-2024 – GB/T 43746.3-2024
- GB/T 43753.1-2024 – GB/T 9914.2-2013