GB/T standards: GB/T 1.1-2020 to GB/T 1819.7-2017

500 standards in English, in code order.

1. GB/T 1.1-2020Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents$1,040.00
2. GB/T 1.2-2020Directives for standardization - Part 2: Drafting rules of standardizing documents based on ISO/IEC standardizing documents$305.00
3. GB/T 8-2021Square head bolts—Product grade C$95.00
4. GB/T 10-2013Countersunk head square neck bolts$110.00
5. GB/T 11-2013Countersunk head nib bolts$110.00
6. GB/T 12-2013Cup head square neck bolts$110.00
7. GB/T 13-2013Cup head nib bolts$110.00
8. GB/T 14-2013Mushroom head square neck bolts$90.00
9. GB/T 15-2013Mushroom head nib bolts$110.00
10. GB/T 29.1-2013Hexagon bolts with slot on head$110.00
11. GB/T 31.1-2013Hexagon bolts with split pin hole on shank$110.00
12. GB/T 31.2-2025Fasteners - Hexagon head bolts with split pin hole on shank - Part 2: Reduced shank - Product grade B$185.00
13. GB/T 31.3-2025Fasteners — Hexagon head bolts with split pin hole on shank — Part 3: Fine pitch thread$245.00
14. GB/T 32.1-2020Hexagon bolts with wire holes on head$95.00
15. GB/T 32.2-2025Fasteners - Hexagon head bolts with split pin hole on head - Part 2: Reduced shank - Product grade B$190.00
16. GB/T 32.3-2020Hexagon bolts with wire holes on head—Fine pitch thread$95.00
17. GB/T 70.6-2020Hexagon socket head cap screws - Fine pitch thread$135.00
18. GB/T 71-2018Slotted set screws with cone point$90.00
19. GB/T 73-2017Slotted set screws with flat point$90.00
20. GB/T 74-2018Slotted set screws with cup point$90.00
21. GB/T 75-2018Slotted set screws with long dog point$90.00
22. GB/T 83-2018Square set screws with long dog point and rounded end$90.00
23. GB/T 84-2018Square set screws with cup point$90.00
24. GB/T 85-2018Square set screws with long dog point$90.00
25. GB/T 86-2018Square set screws with short dog point and cone end$90.00
26. GB/T 93-2025Fasteners - Single coil spring lock washers - Normal type$200.00
27. GB/T 94.1-2008Specification for spring washers - Single coil lock washers$94.00
28. GB/T 94.3-2008Specification for spring washers - Curved and wave spring washers$70.00
29. GB/T 94.4-2017Specifications for spring washers—Conical spring washers$150.00
30. GB/T 116-1986Specifications for rivet$114.00
31. GB/T 143-2017Ripping logs$65.00
32. GB/T 144-2024Log inspection$245.00
33. GB/T 147-2020Untrimmed sizes of printing, writing and drawing paper$90.00
34. GB/T 150.1-2024Pressure vessels - Part 1: General requirements$590.00
35. GB/T 150.2-2024Pressure vessels - Part 2: Materials$590.00
36. GB/T 150.3-2024Pressure vessels - Part 3: Design$2,750.00
37. GB/T 150.4-2024Pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance$590.00
38. GB/T 151-2026Heat exchangers$4,640.00
39. GB/T 152.5-2014Fasteners-Countersinks for countersunk head wood screws$70.00
40. GB/T 153-2019Coniferous sawn timber$90.00
41. GB/T 155-2017Defects in logs$360.00
42. GB/T 176-2025Methods for chemical analysis of cement$1,040.00
43. GB/T 191-2025Graphical symbols marking for handling and storage of packages$215.00
44. GB/T 197-2018General purpose metric screw threads -- Tolerances$230.00
45. GB/T 200-2025Moderate-heat portland cement, low-heat portland cement$260.00
46. GB/T 203-2008Granulated blast furnace slag used for cement production$70.00
47. GB/T 205-2024Methods for chemical analysis of aluminate cement$395.00
48. GB/T 208-2014Test method for determining cement density$80.00
49. GB/T 210-2022Sodium carbonate for industrial use$275.00
50. GB/T 214-2026Determination of total sulfur in coal$305.00
51. GB/T 220-2018Determination of the reactivity of coal to carbon dioxide$130.00
52. GB/T 221-2008Notations for the designation of iron and steel products$70.00
53. GB/T 222-2025Steels and alloys - Permissible deviations of product analyzed chemical composition$230.00
54. GB/T 223.21-1994Methods for chemical analysis of iron, steel and alloy--The 5-Cl-PADAB spectrophotometricmethod for the determination of cobalt content$30.00
55. GB/T 223.22-1994Methods for chemical analysis of iron, steel and alloy--The nitroso-R-salt spectrophotometric method for the determination of cobalt content$30.00
56. GB/T 223.26-2008Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method$70.00
57. GB/T 223.29-2008Iron, steel and alloy - Determination of lead content - Carrier precipitation-xylenol orange spectrophotometric method$80.00
58. GB/T 223.36-1994Methods for chemical analysis of iron, steel and alloy--The neutral titration method for the determination of nitrogen content after distillation separation$30.00
59. GB/T 223.37-2020Iron, steel and alloy--Determination of nitrogen content--Indophenol blue spectrophotometric method after distillation separation$215.00
60. GB/T 223.43-2008Iron, steel and alloy - Determination of tungsten content - Gravimetryc method and spectrophotometric method$110.00
61. GB/T 223.54-2022Iron, steel and alloy - Determination of nickel content - Flame atomic absorption spectrometric method$305.00
62. GB/T 223.59-2008Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method$60.00
63. GB/T 223.61-1988Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content$50.00
64. GB/T 223.63-2022Iron, steel and alloy - Determination of manganese content - Sodium (potassium) periodate spectrophotometric method$215.00
65. GB/T 223.69-2008Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace$130.00
66. GB/T 223.72-2008Iron, steel and alloy - Determination of sulfur content - Gravimetric method$70.00
67. GB/T 223.76-1994Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of vanadium content$80.00
68. GB/T 223.77-1994Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of calcium content$80.00
69. GB/T 223.8-2025Iron, steel and alloy — Determination of aluminium content — Titrimetric method and spectrophotometric method$305.00
70. GB/T 223.80-2007Iron, steel and alloy - Determination of trace bismuth and arsenic contents - Hydride generation - atomic fluorescence spectrometric method$90.00
71. GB/T 223.81-2007Iron, steel and alloy - Determination of total aluminum and total boron contents - Microwave digestion - inductively coupled plasma mass spectrometric method$90.00
72. GB/T 223.82-2018Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas$120.00
73. GB/T 223.87-2018Iron,steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method$130.00
74. GB/T 223.88-2019Iron, steel and alloy - Determination of calcium and magnesium contents - Inductively coupled plasma atomic emission spectrometric method$160.00
75. GB/T 223.89-2019Iron, steel and alloy - Determination of tellurium content - Hydride generation-atomic fluorescence spectrometric method$110.00
76. GB/T 223.90-2021Iron, steel and alloy - Determination of silicon content - Inductively coupled plasma atomic emission spectrometric method$245.00
77. GB/T 223.91-2021Iron, steel and alloy - Determination of copper - 2, 2'-Biquinoline spectrophotometric method$215.00
78. GB/T 223.92-2023Iron, steel and alloys - Determination of the lanthanum, cerium, praseodymium, neodymium and samarium contents - Inductively coupled plasma mass spectrometry$360.00
79. GB/T 224-2019Determination of the depth of decarburization of steels$130.00
80. GB/T 225-2006Steel — Hardenability Test by End Quenching (Jominy Test)$60.00
81. GB/T 226-2015Test method for macrostructure and defect of steel by etching$70.00
82. GB/T 228.1-2021Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature$875.00
83. GB/T 228.3-2019Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature$210.00
84. GB/T 228.4-2019Metallic materials -- Tensile testing -- Part 4: Method of test in liquid helium$150.00
85. GB/T 229-2020Metallic Materials — Charpy Pendulum Impact Test Method$340.00
86. GB/T 230.1-2018Metallic materials - Rockwell hardness test - Part 1: Test method$400.00
87. GB/T 230.2-2022Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters$365.00
88. GB/T 230.3-2022Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks$245.00
89. GB/T 231.1-2018Metallic materials - Brinell hardness test - Part 1: Test method$245.00
90. GB/T 231.2-2022Metallic materials—Brinell hardness test—Part 2: Verification and calibration of testing machines$295.00
91. GB/T 231.3-2022Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks$215.00
92. GB/T 232-2024Metallic materials - Bend testing method$155.00
93. GB/T 239.1-2023Metallic materials - Wire - Part 1: Simple torsion test$155.00
94. GB/T 239.2-2023Metallic materials - Wire - Part 2: Reverse torsion test$155.00
95. GB/T 241-2025Metallic materials — Tube — Hydrostatic pressure test$185.00
96. GB/T 244-2020Metallic materials--Tube--Bend test method$80.00
97. GB/T 247-2025General rule of package, mark and certification for steel plate, sheet and strip$455.00
98. GB/T 249-2026Rules for the type designation of discrete semiconductor devices$125.00
99. GB/T 254-2022Semi-refined paraffin wax$85.00
100. GB/T 258-2025Determination of acidity of light petroleum products$260.00
101. GB/T 261-2021Determination of flash point - Pensky-Martens closed cup method$220.00
102. GB/T 269-2023Determination of cone penetration of lubricating greases and petrolatum$305.00
103. GB/T 271-2017Rolling bearings - Classification$130.00
104. GB/T 272-2017Rolling bearings - Identification code$480.00
105. GB/T 273.1-2023Rolling bearings - Boundary dimensions general plan - Part 1: Tapered roller bearings$685.00
106. GB/T 273.2-2018Rolling bearings -- Boundary dimensions, general plan -- Part 2: Thrust bearings$240.00
107. GB/T 273.3-2020Rolling bearings - Boundary dimensions, general plan - Part 3:RAdial bearings$365.00
108. GB/T 283-2021Rolling bearings—Cylindrical roller bearings—Boundary dimensions$335.00
109. GB/T 285-2013Rolling bearings - Double row cylindrical roller bearings - Boundary dimensions$154.00
110. GB/T 288-2013Rolling bearings - Self-aligning roller bearings - Boundary dimensions$380.00
111. GB/T 290-2017Rolling bearings—Needle roller bearings with drawn cup and without inner ring—Boundary dimensions$130.00
112. GB/T 292-2023Rolling bearings—Angular contact ball bearings—Boundary dimensions$245.00
113. GB/T 299-2023Rolling bearings—Double-row tapered roller bearings—Boundary dimensions$275.00
114. GB/T 300-2023Rolling bearings—Four-row tapered roller bearings—Boundary dimensions$185.00
115. GB/T 304.1-2017Spherical plain bearings - Classification$130.00
116. GB/T 304.2-2015Spherical plain bearings - Identification code$70.00
117. GB/T 304.3-2023Spherical plain bearings—Part 3:Fits$245.00
118. GB/T 304.9-2021Spherical plain bearings—Part 9: General technical regulations$170.00
119. GB/T 305-2019Rolling bearings - Snap ring grooves and snap rings for radial bearings - Dimensions, geometrical product specifications (GPS) and tolerance values$270.00
120. GB/T 307.1-2017Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values$560.00
121. GB/T 307.3-2017Rolling bearings - General technical regulations$50.00
122. GB/T 307.4-2017Rolling bearings -- Thrust bearings -- Geometrical product specifications (GPS) and tolerance values$360.00
123. GB/T 309-2021Rolling bearings - Needle roller$215.00
124. GB/T 311.3-2017Insulation co-ordination -- Part 3: Procedures for high-voltage direct current (HVDC) converter stations$1,445.00
125. GB/T 317-2018White granulated sugar$70.00
126. GB/T 320-2025Synthetic hydrochloric acid for industrial use$260.00
127. GB/T 325.1-2018Packaging containers—Steel drums—Part 1: General specifications$130.00
128. GB/T 325.5-2015Packing containers—Steel drums—Part 5: Non-removable head (tight head) drums with a maximum total capacity of 200L$90.00
129. GB/T 325.6-2021Packaging container—Steel drum—Part 6: Tapered-opening steel drum$110.00
130. GB/T 335-2019Non-self-indicating instrument$230.00
131. GB/T 338-2025Methanol for industrial use$215.00
132. GB/T 339-2019Synthetic phenol for industrial use$240.00
133. GB/T 351-2019Metallic materials—Resistivity measurement method$110.00
134. GB/T 382-2025Test method for smoke point of kerosene and aviation turbine fuel$305.00
135. GB/T 384-2025Determination the heat of combustion for hydrocarbon fuels — Bomb calorimeter method$380.00
136. GB/T 386-2021Standard test method for cetane number of diesel fuel oil$500.00
137. GB/T 394.1-2026Non-edible fermented ethanol for industrial use$200.00
138. GB/T 394.2-2025General methods of analysis for ethanol$320.00
139. GB/T 397-2022Commercial coal quality - Coal for coke making$230.00
140. GB/T 398-2018Cotton grey yarn$170.00
141. GB/T 406-2018Cotton grey fabric$240.00
142. GB/T 446-2023Fully refined paraffin wax$140.00
143. GB/T 451.2-2023Paper and board - Part 2: Determination of grammage$260.00
144. GB/T 454-2020Paper--Determination of bursting strength$215.00
145. GB/T 462-2023Paper, board and pulps - Determination of moisture content of analytical sample$230.00
146. GB/T 467-2010Copper cathode$70.00
147. GB/T 469-2023Lead ingots$160.00
148. GB/T 479-2016Determination of plastometric indices of bituminous coal$130.00
149. GB/T 482-2008Sampling of coal seams$130.00
150. GB/T 494-2025Asphalt used in roofing$190.00
151. GB/T 510-2018Determination of solidification point for petroleum products$150.00
152. GB/T 521-2023Test methods for measuring peripheral dimensions of tyres$110.00
153. GB/T 534-2024Sulphuric acid for industrial use$425.00
154. GB/T 538-2018Boric acid for industrial use$90.00
155. GB/T 546-2016Hall anchor$210.00
156. GB/T 594-2008Marine forged steel male thread stop valves$154.00
157. GB/T 595-2026Marine bronze male thread stop valves$260.00
158. GB/T 600-2023General specifications for marine piping valves and fittings$590.00
159. GB/T 601-2016Chemical Reagent - Preparations of Standard Volumetric Solutions$270.00
160. GB/T 602-2026Chemical reagent - Preparation of standard solutions for impurity determination$365.00
161. GB/T 609-2018Chemical reagent -- General method for the determination of total nitrogen$130.00
162. GB/T 611-2021Chemical reagent - General method for the determination of density$95.00
163. GB/T 614-2021Chemical reagent - General method for the determination of refractive index$50.00
164. GB/T 623-2024Chemical reagent—Perchloric acid$180.00
165. GB/T 625-2024Chemical reagent—Sulfuric acid$180.00
166. GB/T 629-2026Chemical reagent - Sodium hydroxide$185.00
167. GB/T 631-2026Chemical reagent - Ammonia solution$260.00
168. GB/T 638-2018Chemical reagent -- Stannous chloride dihydrate$150.00
169. GB/T 649-2023Chemical reagent—Potassium bromide$155.00
170. GB/T 655-2011Chemical reagent - Ammonium persulfate$80.00
171. GB/T 667-2023Chemical reagent—Zinc nitrate hexahydrate$155.00
172. GB/T 669-2023Chemical reagent—Strontium nitrate$155.00
173. GB/T 678-2023Chemical reagent - Ethanol$155.00
174. GB/T 684-2023Chemical reagent - Toluene$155.00
175. GB/T 686-2023Chemical reagent - Acetone$155.00
176. GB/T 693-2024Chemical reagent—Sodium acetate trihydrate$200.00
177. GB/T 699-2015Quality carbon structure steels$70.00
178. GB/T 700-2006Carbon structural steels$85.00
179. GB/T 702-2017Hot-rolled steel bars - Dimensions, shape, weight and tolerances$130.00
180. GB/T 702-2026Steel bars - Dimensions, shape, weight and tolerances$290.00
181. GB/T 706-2016Hot Rolled Section Steel$100.00
182. GB/T 706-2026Hot rolled section steel$245.00
183. GB/T 708-2019Dimension, shape, weight and tolerance for cold-rolled steel strip and sheet$90.00
184. GB/T 708-2026Dimensions, shape, weight and tolerances for cold rolled steel sheet and strip$245.00
185. GB/T 709-2019Dimension, shape, weight and tolerance for hot-rolled steel strip, plate and sheet$110.00
186. GB/T 711-2017Hot-rolled quality carbon structural steel plates, sheets and strips$326.00
187. GB/T 711-2026Hot rolled quality carbon structural steel plate, sheet and strip$200.00
188. GB/T 712-2022Structural steel for ship and ocean engineering$335.00
189. GB/T 713.1-2023Steel plate,sheet and strip for pressure equipments—Part 1:General requirements$215.00
190. GB/T 713.2-2023Steel plate, sheet and strip for pressure equipment - Part 2: Non-alloy and alloy steel with specified elevated temperature properties$245.00
191. GB/T 713.4-2023Steel plate,sheet and strip for pressure equipments—Part 4:Nickel-alloy steels with specified low temperature properties$160.00
192. GB/T 713.5-2023Steel plate, sheet and strip for pressure equipment - Part 5: High manganese steel with specified low temperature properties$160.00
193. GB/T 713.7-2023Steel plate,sheet and strip for pressure equipments—Part 7:Stainless steel and heat resisting steel$455.00
194. GB/T 713.8-2025Steel plate,sheet and strip for pressure equipments—Part 8: Rolled homogeneous and heterogeneous clad steel plate$260.00
195. GB/T 714-2025Structural steel for bridge$365.00
196. GB/T 718-2024Pig iron for casting$185.00
197. GB/T 727-2025Turbocharger nomenclature and code$185.00
198. GB/T 728-2020Tin ingot$110.00
199. GB/T 742-2018Fibrous raw material, pulp, paper and board -- Determination of residue (ash) on ignition at 575 degrees C and 900 degrees C$150.00
200. GB/T 745-2026Fibrous raw material and pulps - Determination of pentosan$155.00
201. GB/T 754-2024Parameter series of steam turbines for power plants$215.00
202. GB/T 755-2025Rotating electrical machines - Rating and performance$570.00
203. GB/T 778.1-2018Meters for cold potable water and hot water -- Part 1: Metrological requirements and technical requirements$130.00
204. GB/T 778.2-2018Meters for cold potable water and hot water -- Part 2: Test methods$1,220.00
205. GB/T 778.3-2018Meters for cold potable water and hot water -- Part 3: Test report format$800.00
206. GB/T 778.4-2018Meters for cold potable water and hot water -- Part 4: Non-metrological requirements not covered in GB/T 778.1$390.00
207. GB/T 778.5-2018Meters for cold potable water and hot water -- Part 5: Installation requirements$210.00
208. GB/T 783-2023Lifting appliances—Basic parameter series$185.00
209. GB/T 786.1-2021Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols$2,190.00
210. GB/T 786.2-2018Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 2: Circuit diagrams$360.00
211. GB/T 786.3-2021Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3: Symbol modules and connected symbols in circuit diagrams$215.00
212. GB/T 794-2021Strenthened cup head square neck bolts$155.00
213. GB/T 795-2008Components of halon fire extinguishing systems$360.00
214. GB/T 798-2021Eye bolts$110.00
215. GB/T 801-2021Cup head square neck bolts with small head and short neck - Product grade B$140.00
216. GB/T 802.1-2008Acorn nuts - Assembling type$114.00
217. GB/T 802.3-2009Acorn hexagon nuts with flange - Welding type$90.00
218. GB/T 802.4-2009Hexagon cap nuts - Welding type$130.00
219. GB/T 821-2018Square set screws with chamfered end$90.00
220. GB/T 845-2017Cross-recessed pan head tapping screws$70.00
221. GB/T 846-2017Cross-recessed countersunk (flat) head tapping screws$70.00
222. GB/T 847-2017Cross-recessed raised countersunk (oval) head tapping screws$90.00
223. GB/T 859-2025Fasteners - Single coil spring lock washers - Light type$185.00
224. GB/T 879.1-2018Spring-type straight pins -- Slotted -- Heavy duty$110.00
225. GB/T 879.2-2018Spring-type straight pins -- Slotted -- Light duty$150.00
226. GB/T 879.3-2018Spring-type straight pins -- Coiled -- Heavy duty$90.00
227. GB/T 879.4-2018Spring-type straight pins -- Coiled -- Standard duty$90.00
228. GB/T 879.5-2018Spring-type straight pins -- Coiled -- Light duty$90.00
229. GB/T 893-2017Retaining rings for bores$210.00
230. GB/T 894-2017Retaining rings for shaft$150.00
231. GB/T 896-2020“E” rings$90.00
232. GB/T 902.1-2008Weld studs for manual welding$90.00
233. GB/T 903-2019Colourless optical glass$420.00
234. GB/T 908-2019Forged bars for dimensions,shape,weight and tolerances$130.00
235. GB/T 915-2010Bismuth$150.00
236. GB/T 920-2023Code for highway pavement classification and type$185.00
237. GB/T 956.3-2017Conical spring washers$90.00
238. GB/T 958-2015Geological legends used for regional geological maps$3,755.00
239. GB/T 959.1-2017Specifications for retaining rings—Circlips$100.00
240. GB/T 967-2008Nut taps$90.00
241. GB/T 970.2-2008Circular screwing dies - Part 2: Technical specifications$80.00
242. GB/T 971-2008thread rolling cylindrical dies$110.00
243. GB/T 972-2008Thread rolling flat dies$110.00
244. GB/T 997-2022Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines$365.00
245. GB/T 999-2021Voltage ratings of DC electric traction system$155.00
246. GB/T 1000-2016Dimensions and characteristics of pin insulators of ceramic for high-voltage overhead lines$210.00
247. GB/T 1001.1-2021Insulators for overhead lines with a nominal voltage above 1 000V - Part 1: Ceramic or glass insulator units for a. c. systems - Definitions, test methods and acceptance criteria$770.00
248. GB/T 1003-2016Three phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions$210.00
249. GB/T 1008-2008General terminology of machining tooling$410.00
250. GB/T 1028-2018Industrial surplus energy resources evaluation methods$120.00
251. GB/T 1029-2021Test procedures for three-phase synchronous machines$1,289.00
252. GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values$30.00
253. GB/T 1032-2023Test methods for three-phase asynchronous motors$940.00
254. GB/T 1037-2021Test method for water vapor transmission of plastic film and sheet - Desiccant method and water method$155.00
255. GB/T 1038.2-2022Plastics - Film and sheeting - Determination of gas-transmission rate - Part 2: Equal-pressure methods$245.00
256. GB/T 1040.2-2022Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics$210.00
257. GB/T 1043.2-2018Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test$300.00
258. GB/T 1047-2019Pipework components - Definition and selection of nominal size$60.00
259. GB/T 1048-2019Pipework components - Definition and selection of nominal pressure$70.00
260. GB/T 1094.1-2013Power transformers-Part 1: General$790.00
261. GB/T 1094.10-2022Power transformers - Part 10: Determination of sound levels$740.00
262. GB/T 1094.11-2022Power transformers—Part 11: Dry-type transformers$700.00
263. GB/T 1094.14-2022Power transformer - Part 14: Liquid-immersed power transformer using high-temperature insulation materials$710.00
264. GB/T 1094.15-2020Power transformers - Part 15: Gas-filled power transformers$360.00
265. GB/T 1094.23-2019Power transformers -- Part 23: DC magnetic bias suppression devices$610.00
266. GB/T 1097-2003Square and rectangular keys$35.00
267. GB/T 1103.3-2024Cotton - Part 3:Natural color upland cotton$260.00
268. GB/T 1119.2-2002Flat relieved tooth slotting cutters--Part 2:The technical specifications$90.00
269. GB/T 1124.2-2007Convex and concave milling cutters - Part 2: Technical specifications$114.00
270. GB/T 1127-2023Woodruff keyseat cutters$230.00
271. GB/T 1131.2-2004Hand reamers--Part 2:Technical conditions$79.00
272. GB/T 1134-2008Machine reamers with edge inclination$150.00
273. GB/T 1146-2009Bubble$230.00
274. GB/T 1147.1-2025Small and medium power internal combustion engines - Part 1: General technical specifications$365.00
275. GB/T 1147.2-2025Small and medium power internal combustion engines - Part 2:Test methods$590.00
276. GB/T 1148-2024Internal combustion engines - Aluminium pistons$560.00
277. GB/T 1149.4-2021Internal combustion engines - Piston rings - Part 4: Quality requirements$275.00
278. GB/T 1149.6-2021Internal combustion engines - Piston rings - Part 6: Scraper rings made of cast iron$470.00
279. GB/T 1149.8-2022Internal combustion engines - Piston rings - Part 8: Rectangular rings made of steel$395.00
280. GB/T 1150-2010Internal combustion engines - Cast iron wet cylinder liners - Specifications$160.00
281. GB/T 1151-2023Internal combustion engines - Main and connecting rod bearings - Specifications$245.00
282. GB/T 1156-2011Sleeve type drip-feed lubricating cups$90.00
283. GB/T 1171-2017Classical V-belt for general drive$130.00
284. GB/T 1172-1999Conversion of hardness and strength for ferrous metal$140.00
285. GB/T 1173-2013Casting aluminum alloy$75.00
286. GB/T 1174-2022Cast bearing alloy$275.00
287. GB/T 1175-2018Casting zinc alloys$100.00
288. GB/T 1176-2013Casting copper and copper alloys$70.00
289. GB/T 1177-2018Casting magnesium alloys$130.00
290. GB/T 1182-2018Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out$1,480.00
291. GB/T 1190-2018Technical specification of earth-mover tyres$80.00
292. GB/T 1192-2017Technical specification of agricultural tyres$60.00
293. GB/T 1196-2023Unalloyed aluminium ingots for remelting$155.00
294. GB/T 1202-2025Scale paraffin wax$125.00
295. GB/T 1209.1-2009Agricultural machinery - Cutter bars - Part 1: Assembly$230.00
296. GB/T 1209.2-2009Agricultural machinery - Cutter bars - Part 2:Guard$170.00
297. GB/T 1209.3-2009Agricultural machinery - Cutter bars - Part 3:Knife sections, ledger plates and knife backs$140.00
298. GB/T 1209.4-2009Agricultural machinery - Cutter bars - Part 4: Knife clips$170.00
299. GB/T 1209.5-2009Agricultural machinery - Cutter bars - Part 5: Wearing plates$130.00
300. GB/T 1216-2018External micrometer$130.00
301. GB/T 1217-2022Micrometer for measuring root tangent lengths of gear teeth$155.00
302. GB/T 1218-2018Depth micrometer$150.00
303. GB/T 1219-2008Dial gauges$110.00
304. GB/T 1220-2007Stainless steel bars$110.00
305. GB/T 1221-2007Heat-resistant steel bars$130.00
306. GB/T 1222-2016Spring Steels$120.00
307. GB/T 1222-2025Spring Steels$395.00
308. GB/T 1224-2016Vocabulary and character for geometrical optics$630.00
309. GB/T 1226-2017General pressure gauge$240.00
310. GB/T 1227-2017Accurate pressure gauge$210.00
311. GB/T 1231-2024High strength bolts with large hexagon head assemblies for steel structures$320.00
312. GB/T 1232.3-2021Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR$100.00
313. GB/T 1234-2012High resistance alloys for electrical heating$260.00
314. GB/T 1239.1-2009Cold coiled helical springs - Technical specifications - Part 1: Extension springs$254.00
315. GB/T 1239.2-2009Cold coiled helical springs technical specifications - Part 2: Compressions spring$90.00
316. GB/T 1239.3-2009Cold coiled helical springs technical specifiations - Part 3: Torsion spring$140.00
317. GB/T 1241-2008Marine forged steel male thread stop-check valves$30.00
318. GB/T 1265-2003Chemical reagent--Sodium bromide$150.00
319. GB/T 1267-2011Chemical reagent - Sodium dihydrogen phosphate dihydrate$150.00
320. GB/T 1270-2023Chemical reagent—Cobalt(II) chloride hexahydrate$145.00
321. GB/T 1271-2011Chemical reagent - Potassium fluoride dihydrate$140.00
322. GB/T 1285-1994Chemical reagent--Cadmium chloride$130.00
323. GB/T 1288-2024Chemical reagent - Potassium sodium tartrate tetrahydrate$260.00
324. GB/T 1289-2022Chemical reagent - Sodium oxalate$110.00
325. GB/T 1299-2025Tool and mould steels$1,140.00
326. GB/T 1303.13-2026Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 13: Rigid laminated sheets based on benzoxazine resin$260.00
327. GB/T 1311-2024Test methods for direct current machines$920.00
328. GB/T 1312-2022Lampholders for tubular fluorescent lamps and starterholders$1,280.00
329. GB/T 1332-1991Trucks--Engineering approval evaluation program$130.00
330. GB/T 1335.1-2008Standard sizing systems for garments - Men$210.00
331. GB/T 1335.2-2008Standard sizing systems for garments - Women$240.00
332. GB/T 1335.3-2009Standard sizing systems for garments - Children$234.00
333. GB/T 1339-1988Self-locking nuts, reduced hexagon$170.00
334. GB/T 1345-2026Methods for testing cement fineness — Sieve analysis$155.00
335. GB/T 1347-2008Methods for chemical analysis of soda-lime-silica glass$380.00
336. GB/T 1348-2019Spheroidal graphite iron castings$380.00
337. GB/T 1354-2018Milled rice$180.00
338. GB/T 1355-2021Wheat flour$125.00
339. GB/T 1358-2009Cylindrical helical spring seriate sizes$110.00
340. GB/T 1361-2024General rules and regulations for analysis of iron ores$155.00
341. GB/T 1392-2021Ships and marine technology - Deck machinery - Accommodation ladder winches$110.00
342. GB/T 1400-2014Chemical reagent-Hexamethylene tetramine$90.00
343. GB/T 1414-2013General purpose metric screw threads - The plan for pipe systems$70.00
344. GB/T 1415-2008Metric threads where pressure-tight joints are made on the threads$130.00
345. GB/T 1416-2021Envelopes$245.00
346. GB/T 1418-1995Letter symbols for telecommunication equipment$90.00
347. GB/T 1419-2015Sponge platinum$240.00
348. GB/T 1420-2015Sponge palladium$210.00
349. GB/T 1421-2018Rhodium powder$240.00
350. GB/T 1422-2018Iridium powder$210.00
351. GB/T 1423-1996Method of measurement of density for precious metals and their alloys$65.00
352. GB/T 1425-2021Determination of melting temperature range for precious metals and their alloys - Testing method of thermal analysis$155.00
353. GB/T 1426-2008The classifications of carbon materials$305.00
354. GB/T 1427-2016Sample method of carbon material$130.00
355. GB/T 1429-2025Proximate analysis of carbon materials$215.00
356. GB/T 1431-2019The test method for compressive strength of carbon materials$70.00
357. GB/T 1438.2-2008Taper shank twist drills - Part 2: The types and dimensions for long Morse taper shank twist drills$114.00
358. GB/T 1438.3-2008Taper shank twist drills - Part 3: The types and dimensions for lengthened Morse taper shank twist drills$80.00
359. GB/T 1445-2018White soft sugar$90.00
360. GB/T 1446-2005Fiber-reinforced plastics composites-The generals for determination of properties$100.00
361. GB/T 1448-2005Fiber-reinforced plastics composites-Determination of compressive properties$50.00
362. GB/T 1450.1-2005Fibre-reinforced plastic composites-Determination of interlaminar shear strength$20.00
363. GB/T 1450.2-2005Fibre-reinforced plastic composites-Determination of the punch-type shear strength$50.00
364. GB/T 1451-2005Fiber-reinforced plastics composites---Determination of Charpy impact properties$20.00
365. GB/T 1452-2018Test method for flatwise tension strength of sandwich constructions$155.00
366. GB/T 1453-2022Test method for flatwise compression properties of sandwich constructions or cores$170.00
367. GB/T 1454-2021Test method for edgewise compressive properties of sandwich constructions$155.00
368. GB/T 1455-2022Test method for shear properties of sandwich constructions or cores$170.00
369. GB/T 1456-2021Test method for flexural properties of sandwich constructions$245.00
370. GB/T 1457-2022Test method for climbing drum peel strength of sandwich constructions$185.00
371. GB/T 1458-2023Test method for mechanical properties of ring of filament-winding reinforced composites$310.00
372. GB/T 1463-2026Test methods for the density and relative density of fibre reinforced plastics$155.00
373. GB/T 1464-2024Test method for density of sandwich construction or cores$95.00
374. GB/T 1467-2008Method for chemical analysis of metallurgy product - General rules and regulations$90.00
375. GB/T 1475-2022Gallium$110.00
376. GB/T 1479.3-2017Metallic powders - Determination of apparent density - Part 3: Oscillating funnel method$90.00
377. GB/T 1481-2022Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression$155.00
378. GB/T 1482-2022Metallic powders - Determination of flow rate - Calibrated funnel methods(Hall flowmeter)$140.00
379. GB/T 1499.3-2022Steel for the reinforcement of concrete - Part 3:Welded fabric$155.00
380. GB/T 1503-2024Cast steel rolls$305.00
381. GB/T 1504-2024Cast iron rolls$335.00
382. GB/T 1506-2016Manganese ores - Determination of manganese content - Potentiometric method and ammonium iron(II) sulphate titrimetric method$130.00
383. GB/T 1510-2016Manganese ores - Determination of aluminium content - EDTA titrimetric method$150.00
384. GB/T 1513-2006Manganese ores - Determination of calcium and magnesium contents -Flame atomic absorption spectrometric method$140.00
385. GB/T 1515-2002Manganese ores--Determination of phosphorus content--Phosphomolybdenum blue spectrophotometric method$100.00
386. GB/T 1525-2006Design paper$105.00
387. GB/T 1527-2017Drawn tube of copper and copper alloys$130.00
388. GB/T 1531-2020Copper and copper alloy capillary tube$330.00
389. GB/T 1532-2008Peanut$140.00
390. GB/T 1534-2026Peanut oil$200.00
391. GB/T 1535-2026Soya bean oil$200.00
392. GB/T 1536-2021Rapeseed oil$120.00
393. GB/T 1537-2019Cottonseed oil$150.00
394. GB/T 1541-2013Paper and board - Determination of dirt$50.00
395. GB/T 1546-2018Pulp -- Determination of Kappa number$210.00
396. GB/T 1547-2004Pulps--Determination of permanganate number$114.00
397. GB/T 1549-2008Chemical analysis methods of glass, glass marble and vitreous fiber$610.00
398. GB/T 1550-2018Test methods for conductivity type of extrinsic semiconducting materials$215.00
399. GB/T 1551-2021Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method$365.00
400. GB/T 1553-2023Test methods for minority carrier lifetime in bulk silicon and germanium - Photoconductivity decay method$455.00
401. GB/T 1554-2009Testing method for crystallographic perfection of silicon by preferential etch techniques$350.00
402. GB/T 1555-2023Test methods for determining the orientation of a semiconductive single crystal$160.00
403. GB/T 1557-2018Test method for determining interstitial oxygen content in silicon by infrared absorption$155.00
404. GB/T 1558-2023Test method for substitutional carbon content in silicon by infrared absorption$155.00
405. GB/T 1563-2017Taper keys - Cross section dimensions of keyways$60.00
406. GB/T 1565-2003Gib head taper keys$50.00
407. GB/T 1568-2008Technical specifications for keys$70.00
408. GB/T 1569-2005Cylindrical shaft ends$105.00
409. GB/T 1570-2005conical shaft ends$120.00
410. GB/T 1572-2018Determination of clinkering property of coal$120.00
411. GB/T 1573-2018Determination of the thermal stability of coal$70.00
412. GB/T 1575-2018Determination of yield of benzene-soluble extract in brown coals$120.00
413. GB/T 1576-2018Water quality for industrial boilers$260.00
414. GB/T 1587-2025Potassium carbonate for industrial use$260.00
415. GB/T 1591-2018High strength low alloy structural steels$95.00
416. GB/T 1596-2017Fly ash used for cement and concrete$70.00
417. GB/T 1598-2010Platinum-10%Rhodium/Platinem thermocomouple wires - Platinum-13%Rhodium/Platinem thermocomouple wires - Platinum-30%Rhodium/Platinem-6%Rhodium thermocomouple wires$230.00
418. GB/T 1599-2014Antimony ingot$70.00
419. GB/T 1600-2021Testing method of water for pesticides$155.00
420. GB/T 1601-2023Determination method of pH value for pesticides$155.00
421. GB/T 1602-2025Determination method of melting point and melting range for pesticides$180.00
422. GB/T 1603-2025Determination method of emulsion stability for pesticides$125.00
423. GB/T 1604-2025Commodity pesticide regulations for acceptance$125.00
424. GB/T 1606-2025Sodium bicarbonate for industrial use$305.00
425. GB/T 1608-2017Potassium permanganate for industrial use$240.00
426. GB/T 1610-2024Chromium trioxide for industrial use$305.00
427. GB/T 1614-2021Barium carbonate for industrial use$245.00
428. GB/T 1615-2021Carbon disulfide for industrial use$155.00
429. GB/T 1617-2023Barium chloride for industrial use$310.00
430. GB/T 1618-2018Sodium chlorate for industrial use$210.00
431. GB/T 1621-2023Ferric chloride for industrial use$230.00
432. GB/T 1628-2020Glacial acetic acid for industrial use$320.00
433. GB/T 1630.2-2023Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins$160.00
434. GB/T 1631-2008Designation system and basis for specifications of ion exchange resins$60.00
435. GB/T 1632.4-2020Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate(PC) moulding and extrusion materials$180.00
436. GB/T 1634.2-2019Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite$120.00
437. GB/T 1637-2006Solubilised vat dyes - Determination of shade and relative strength$110.00
438. GB/T 1646-20202-Naphthol$110.00
439. GB/T 1648-2013H-acid monosodium salt (1-Naphthylamine-8-hydroxy-3,6-disulfonic acid monosodium salt)$150.00
440. GB/T 1652-2014Naphthol AS$150.00
441. GB/T 1653-2023o-, p-Chloronitrobenzene$155.00
442. GB/T 1655-2013Sulphur Black 3B, 4B, 3BR, 2RB(Sulphur Black BN, BRN, B2RN, RN)$130.00
443. GB/T 1660-2008Determinating the kincmatic viscosity of plasticizers$170.00
444. GB/T 1665-2008Plasticizers - Determination of saponification value and ester-content$90.00
445. GB/T 1668-2008Plasticizers - Determination of acid value and acidity$65.00
446. GB/T 1670-2008Plasticizers - Test method of heat resistance$70.00
447. GB/T 1671-2008Plasticizers - Determination of flash point - Cleveland open cup method$90.00
448. GB/T 1676-2008Determinating the iodine value of plasticizers$70.00
449. GB/T 1677-2023Determinating the epoxy value of plasticizers$95.00
450. GB/T 1682-2014Vulcanized rubber - Determination of low-temperature brittleness - Single test piece method$30.00
451. GB/T 1683-2018Rubber,vulcanized - Determination of compression set at constant strain$130.00
452. GB/T 1685-2008Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression at ambient and at elevated temperatures$170.00
453. GB/T 1685.2-2019Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling$190.00
454. GB/T 1687.4-2021Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 4: Constant-stress flexometer$310.00
455. GB/T 1689-2014Rubber vulcanized-Determination of abrasion resistance (Akron machine)$30.00
456. GB/T 1690-2010Rubber, vulcanized or thermoplastic—Determination of the effect of liquids$70.00
457. GB/T 1692-2008Vulcanized rubber-Determination of the insulation resistivity$140.00
458. GB/T 1702-2017Cycle tyres$130.00
459. GB/T 1703-2017Cycle inner tubes$70.00
460. GB/T 1720-2020Circle-drawing test of coating films$110.00
461. GB/T 1721-2008Determination of appearance and transparency of varnishes, boiled oils and thinners$105.00
462. GB/T 1724-2019Paints, varnishes and printing inks - Determination of fineness of grind$100.00
463. GB/T 1727-2021General methods for preparation of coating films$155.00
464. GB/T 1728-2020Determination of drying time of coating and putty films$90.00
465. GB/T 1731-2020Determination of flexibility of coating and putty films$140.00
466. GB/T 1732-2020Determination of impact resistance of coating films$95.00
467. GB/T 1735-2026Paints and varnishes — Determination of heat resistance$170.00
468. GB/T 1740-2007Determination of resistance to heat and humidity of paint films$100.00
469. GB/T 1741-2020Test method for determining the resistance of paints film to mold$110.00
470. GB/T 1749-2025Determination of consistency of pastes and putties$95.00
471. GB/T 1766-2008Paints and Varnishes – Rating Schemes of Degradation of Coats$70.00
472. GB/T 1770-2008Rubbing test of coatings and putty films$90.00
473. GB/T 1773-2025Flake silver powder$160.00
474. GB/T 1774-2009Superfine silver powder$170.00
475. GB/T 1775-2025Superfine gold powder$190.00
476. GB/T 1776-2025Superfine platinum powder$180.00
477. GB/T 1777-2025Superfine palladium powder$200.00
478. GB/T 1792-2015Determination of mercaptan sulfur in gasoline,kerosine,jet,and distillate fuels - Potentiometric method$210.00
479. GB/T 1796.4-2017Tyre valves - Part 4: Tubeless clamp-in valves$480.00
480. GB/T 1796.6-2018Tyre valves - Part 6:Cores$240.00
481. GB/T 1796.7-2018Tyre valves - Part 7:Components$300.00
482. GB/T 1797-2008Raw silk$85.00
483. GB/T 1798-2008Test methods for raw silk$100.00
484. GB/T 1800.1-2020Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits$485.00
485. GB/T 1800.2-2020Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts$680.00
486. GB/T 1803-2003Limits and fits--Tolerance zones for holes and shafts size up to 18mm$110.00
487. GB/T 1805-2021Spring - Vocabulary$890.00
488. GB/T 1815-2019Determination for the bromine number and bromine index of benzole products$90.00
489. GB/T 1816-2019Test for neutrality of benzole products$95.00
490. GB/T 1817-2017Test method for impact toughness of cemented carbides at room temperature$90.00
491. GB/T 1819.1-2022Methods for chemical analysis of tin concentrates—Part 1: Determination of moisture content—Heat drying method$140.00
492. GB/T 1819.10-2017Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method$150.00
493. GB/T 1819.11-2017Methods for chemical analysis of tin concentrates - Part 11: Determination of aluminium oxide content - Chromazuzal S spectrophotometric method$90.00
494. GB/T 1819.12-2017Methods for chemical analysis of tin concentrates - Part 12:Determination of silicon dioxide content - The silicomolybdenum blue spectrophotometry and sodium hydroxide titration$150.00
495. GB/T 1819.13-2017Methods for chemical analysis of tin concentrates—Part 13: Determination of magnesium oxide content,calcium oxide content—Flame atomic absorption spectrometric method$150.00
496. GB/T 1819.14-2017Methods for chemical analysis of tin concentrates—Part 14: Determination of copper content—Flame atomic absorption spectrometry$60.00
497. GB/T 1819.15-2017Methods for chemical analysis of tin concentrates - Part 15: Determination of fluorine content - The ion-selective electrode method$90.00
498. GB/T 1819.16-2017Methods for chemical analysis of tin concentrats - Part 16:Determination of siliver content - Flame atomic absorption spectrometry$90.00
499. GB/T 1819.17-2017Methods for chemical analysis of tin concentrates—Part 17: Determination of mercury content—Atomic fluorescence spectrometric method$90.00
500. GB/T 1819.7-2017Methods for chemical analysis of tin concentrates - Part 7:Determination of bismuth content - Flame atomic absorption spectrometric method$90.00