Valid

GB/T 223.18-2026Iron, steel and alloy - Determination of copper content - Iodometric and spectrophotometric methods (English PDF)

钢铁及合金 铜含量的测定 碘量法和分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 223.18-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

September 28, 2026

Implementation date

April 1, 2027

Scope

GB/T 223.18-2026 is the English-translated version of 钢铁及合金 铜含量的测定 碘量法和分光光度法.

GB/T 223.18-2026 is the Chinese national standard "Iron, steel and alloy - Determination of copper content - Iodometric and spectrophotometric methods". It was issued on September 28, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on April 1, 2027. It is a current standard and replaces GB/T 223.18-1994.

Found what you need?

Document preview — GB/T 223.18-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 223.18-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 28 September 2026 and takes effect on 1 April 2027.

It replaces the earlier edition GB/T 223.18-1994.

It is one of 136 parts of the GB/T 223 series.

2 Scope Preview

GB/T 223.18-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 223.1-1981 — Determination of carbon content in iron, steel and alloy

GB/T 223.2-1981 — Determination of sulphur content in iron, steel and alloy

GB/T 223.3-1988 — Methods for chemical analysis of iron, steel and alloy. The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content

GB/T 223.3-2026 — Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method

GB/T 223.4-1988 — Methods for chemical analysis of iron, steel and alloy--The volumetric method for determination of manganese content by ammonium nitrate oxidation

GB/T 223.4-2008 — Alloyed steel - Determination of manganese content - Potentiometric or visual titration method

GB/T 223.5-1988 — Methods for chemical analysis of iron, steel and alloy--The oxalic acid-ferrous sulfate molybdosilicate blue complex photometric method for the determination of silicon content

GB/T 223.5-1997 — Methods for chemical analysis of iron, steel and alloy. The reduced molybdosilicate spectrophotometric method for the determination of acid-soluble silicon content

GB/T 223.5-2008 — Steel and iron -- Determination of acid-soluble silicon and total silicon content -- Reduced molybdosilicate spectrophotometric method

GB/T 223.6-1994 — Methods for chemical analysis of iron, steel and alloy. The neutralization titrimetric method for the determination of boron content

GB/T 223.6-2025 — Iron, steel and alloy - Determination of boron content - Neutralization titrimetric method and spectrophotometric method

GB/T 223.7-1981 — Determination of iron content in alloy and powder

GB/T 223.7-2002 — Iron powder--Determination of iron content--Potassium dichromate titration method

GB/T 223.8-1991 — Methods for chemical analysis of iron, steel and alloy--The sodium fluoride separation-EDTA volumetric method for the determination of aluminium content

GB/T 223.8-2000 — Methods for chemical analysis of iron, steel and alloy. The sodium fluoride separation. EDTA titration method for the determination of aluminium content

GB/T 223.8-2025 — Iron, steel and alloy — Determination of aluminium content — Titrimetric method and spectrophotometric method

GB/T 223.9-1989 — Methods for chemical analysis of iron, steel and alloy - The chrome azurol S photometric method for the determination of aluminium content

GB/T 223.9-2000 — Methods for chemical analysis of iron, steel and alloy - The chrome azurol S photometric method for the determination of aluminium content

GB/T 223.9-2008 — Iron, steel and alloy -- Determination of aluminium content -- Chrome azurol S photometric method

GB/T 223.10-1991 — Methods for chemical analysis of iron, steel and alloy--The cupferron separation-chrome azurol S photometric method for the determination of aluminium content

GB/T 223.10-2000 — Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content

GB/T 223.11-1991 — Methods for chemical analysis of iron, steel and alloy--The ammonium persulfate oxidation volumetric method for the determination of chromium content

GB/T 223.11-2008 — Iron, steel and alloy -- Determination of chromium content -- Visual titration or potentiometric titration method

GB/T 223.11-2025 — Iron, steel and alloy - Determination of chromium content - Titrimetric method and spectrophotometric method

GB/T 223.12-1991 — Methods for chemical analysis of iron, steel and alloy. The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content

GB/T 223.13-1989 — Methods for chemical analysis of iron, steel and alloy--The ammonium ferrous sulfate titration method for the determination of vanadium content

GB/T 223.13-2000 — Methods for chemical analysis of iron, steel and alloy. The ammonium ferrous sulfate titration method for the determination of vanadium content

GB/T 223.13-2025 — Iron, steel and alloy - Determination of vanadium content - Titrimetric method and spectrophotometric method

GB/T 223.14-1989 — Methods for chemical analysis of iron, steel and alloy--The N-benzoyl-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content

GB/T 223.14-2000 — Methods for chemical analysis of iron, steel and alloy. The N-benzoyl-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content

GB/T 223.15-1982 — Chemical analysis of iron, steel and alloy--The determination of titanium by gravimetric method

GB/T 223.16-1991 — Methods for chemical analysis of iron, steel and alloy. The chromotropic acid photometric method for the determination of titanium content

GB/T 223.17-1989 — Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content

GB/T 223.19-1989 — Methods for chemical analysis of iron, steel and alloy. The neocuproine-chloroform extraction photometric method for the determination of copper content

GB/T 223.20-1994 — Methods for chemical analysis of iron,steel and alloy--The fotentiometric titration method for the determination of cobalt content

GB/T 223.21-1994 — Methods for chemical analysis of iron, steel and alloy--The 5-Cl-PADAB spectrophotometricmethod for the determination of cobalt content

GB/T 223.22-1994 — Methods for chemical analysis of iron, steel and alloy--The nitroso-R-salt spectrophotometric method for the determination of cobalt content

GB/T 223.23-1994 — Methods for chemical analysis of iron, steel and alloy. The dimethylglyoxime spectrophotometric method for the determination of nickel content

GB/T 223.23-2008 — Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method

GB/T 223.23-2026 — Iron, steel and alloy—Determination of nickel content—Spectrophotometric method and gravimetric method

GB/T 223.24-1994 — Methods for chemical analysis of iron, steel and alloy. The extraction seperation--The dimethylglyoxime spectrophotometric method for the determination of nickel content

GB/T 223.25-1994 — Methods for chemical analysis of iron, steel and alloy--The dimethylglyoxime gravimetric method forthe determination of nickel content

GB/T 223.26-1989 — Methods for chemical analysis of iron, steel and alloy--The thiocyanate direct photometric method for the determination of molybdenum content

GB/T 223.26-2008 — Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method

GB/T 223.27-1994 — Methods for chemical analysis of iron, steel and alloy. The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content

GB/T 223.28-1989 — Methods for chemical analysis of iron, steel and alloy. The α-benzoin oxime gravimetric method for the determination of molybdenum content

GB/T 223.29-1984 — Methods for chemical analysis of iron, steel and alloy--The xylenol orange photometric method for determination of lead content after carrier precipitation

GB/T 223.29-2008 — Iron, steel and alloy - Determination of lead content - Carrier precipitation-xylenol orange spectrophotometric method

GB/T 223.30-1994 — Methods for chemical analysis of iron, steel and alloy. The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid

GB/T 223.31-1994 — Methods for chemical analysis of iron, steel and alloy. The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content

GB/T 223.31-2008 — Iron, steel and alloy -- Determination of arsenic content -- Distillation-molybdenum blue spectrophotometric method

GB/T 223.31-2026 — Iron, steel and alloy - Determination of arsenic content - spectrophotometric method and iodimetric method

GB/T 223.32-1994 — Methods for chemical analysis of iron, steel and alloy. The hypophosphite reduction-iodimetric method for the determination of arsenic content

GB/T 223.33-1994 — Methods forchemical analysis of iron,steel and alloy--The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation

GB/T 223.34-1984 — Methods for chemical analysis of iron, steel and alloy The determination of hydrochloric acid-insoluble content of iron powder

GB/T 223.34-2000 — Methods for chemical analysis of iron,steel and alloy--The determination of hydrochloric acid-insoluble content of iron powders

GB/T 223.35-1985 — Methods for chemical analysis of iron, steel and alloy--The pulse heating inert gas fusion-coulometric titration method for the determination of oxygen content

GB/T 223.36-1994 — Methods for chemical analysis of iron, steel and alloy--The neutral titration method for the determination of nitrogen content after distillation separation

GB/T 223.37-1989 — Methods for chemical analysis of iron, steel and alloy. The indophenol blue photometric methods for the determination of nitrogen content after distillation separation

GB/T 223.37-2020 — Iron, steel and alloy--Determination of nitrogen content--Indophenol blue spectrophotometric method after distillation separation

GB/T 223.38-1985 — Methods for chemical analysis of iron, steel and alloy. The anion-exchange separation-gravimetric method for the determination of niobium content

GB/T 223.40-1985 — Methods for chemical analysis of iron, steel and alloy--The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content

GB/T 223.40-2007 — Iron, steel and alloy - Determination of niobium content - The sulphochlorophenol S spectrophotometric method

GB/T 223.41-1985 — Methods for chemical analysis of iron, steel and alloy. The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content

GB/T 223.42-1985 — Methods for chemical analysis of iron, steel and alloy. The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content

GB/T 223.43-1994 — Methods for chemical analysis of iron, steel and alloy. Determination of tungsten content

GB/T 223.43-2008 — Iron, steel and alloy - Determination of tungsten content - Gravimetryc method and spectrophotometric method

GB/T 223.45-1994 — Methods for chemical analysis of iron, steel and alloy. The cupral Separation-xylidyl blue IIphotometric method for the determination of magnesium content

GB/T 223.46-1989 — Methods for chemical analysis of iron, steel and alloy. The flame atomic absorption spectrometric method for the determination of magnesium content

GB/T 223.47-1994 — Methods for chemical analysis of iron,steel and alloy--The carrier precipitation-molybdenumblue potometric method for the determination of antimony content

GB/T 223.48-1985 — Methods for chemical analysis of iron, steel and alloy. The semixylenol orange photometric method for the determination of bismuth content

GB/T 223.49-1994 — Methods for chemical analysis of iron, steel and alloy--Extraction separation-chlorophosphonazo mA spectro-photometric method for the determination of the total rare earth content

GB/T 223.50-1994 — Methods for chemical analysis of iron,steel and alloy--The phenylfluorone-CTMAB direct photometric method for the determination of tin content

GB/T 223.51-1987 — Methods for chemical analysis of iron, steel and alloy. The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content

GB/T 223.52-1987 — Methods for chemical analysis of iron, steel and alloy. The hydroxylamine hydrochloride-iodometric method for the determination of selenium content

GB/T 223.53-1987 — Methods for chemical analysis of iron, steel and alloy. The flame atomic absorption spectrophotometric method for the determination of copper content

GB/T 223.54-1987 — Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrophotometric method for the determination of nickel content

GB/T 223.54-2022 — Iron, steel and alloy - Determination of nickel content - Flame atomic absorption spectrometric method

GB/T 223.55-1987 — Methods for chemical analysis of iron, steel and alloy--The direct oscillopolarographic method for the determination of tellurium content

GB/T 223.55-2008 — Iron, steel and alloy -- Determination of tellurium content -- Oscillo-polarographic method

GB/T 223.56-1987 — Methods for chemical analysis of iron, steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content

GB/T 223.57-1987 — Methods for chemical analysis of iron, steel and alloy - The extraction - Absorption catalytic polarographic method for the determination of cadmium content

GB/T 223.58-1987 — Methods for chemical analysis of iron, steel and alloy - The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content

GB/T 223.59-1987 — Methods for chemical analysis of iron, steel and alloy--The reduced molybdoantimonyl phosphoric acid photometric method for the determination of phosphorus content

GB/T 223.59-2008 — Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method

GB/T 223.60-1987 — Methods for chemical analysis of iron, steel and alloy--The perchloric acid dehydration for the determination of silicon content

GB/T 223.60-1997 — Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content

GB/T 223.60-2024 — Iron, steel and alloy - Determination of silicon content - Gravimetric method

GB/T 223.61-1988 — Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content

GB/T 223.62-1988 — Methods for chemical analysis of iron,steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content

GB/T 223.63-1988 — Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content

GB/T 223.63-2022 — Iron, steel and alloy - Determination of manganese content - Sodium (potassium) periodate spectrophotometric method

GB/T 223.64-1988 — Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of manganese content

GB/T 223.64-2008 — Iron, steel and alloy -- Determination of manganese content -- Flame atomic absorption spectrometric method

GB/T 223.65-1988 — Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of cobalt content

GB/T 223.65-2012 — Steel, iron and alloy -- Determination of cobalt content -- Flame atomic absorption spectrometric method

GB/T 223.66-1989 — Methods for chemical analysis of iron, steel and alloy - The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content

GB/T 223.67-1989 — Methods for chemical analysis of iron, steel and alloy--The reducing distillation-methylene blue photometric method for the determination of sulfur content

GB/T 223.67-2008 — Iron, steel and alloy -- Determination of sulfur content -- Methylene blue spectrophotometric method

GB/T 223.68-1989 — Methods for chemical analysis of iron, steel and alloy--The combustion potassium iodate volumetric method for the determination of sulfur content

GB/T 223.68-1997 — Methods for chemical analysis of iron, steel and alloy--The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content

GB/T 223.69-1989 — Methods for chemical analysis of iron, steel and alloy--The combustion volumetric method for the determination of carbon content

GB/T 223.69-1997 — Methods for chemical analysis of iron, steel and alloy. The gas-volumetric method after combustion in the pipe furnace for the determination of carbon content

GB/T 223.69-2008 — Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace

GB/T 223.70-1989 — Methods for chemical analysis of iron, steel and alloy--The o-phenanthroline spectrophotometric method for the determination of iron content

GB/T 223.70-2008 — Iron, steel and alloy - Determination of iron contents - O-phenanthroline spectrophotometric method

GB/T 223.71-1991 — Methods for chemical analysis of iron, steel and alloy--The combustion gravimetric method for the determination of carbon content

GB/T 223.71-1997 — Methods for chemical analysis of iron, steel and alloy--The gravimetric method after combustion in the pipe furnace for the determination of carbon content

GB/T 223.72-1991 — Methods for chemical analysis of iron, steel and alloy--The alumina chromatographic separation-barium sulfate gravimetric method for the deteremination of sulphur content

GB/T 223.72-2008 — Iron, steel and alloy - Determination of sulfur content - Gravimetric method

GB/T 223.73-1991 — Methods for chemical analysis of iron, steel and alloy--The titanium trichloride-potassium dichromate volumetric method for the determination of iron content

GB/T 223.73-2008 — Iron, steel and alloy - Determination of iron contents - Titanium trichloride-potassium dichromate titration method

GB/T 223.74-1991 — Methods for chemical analysis of iron, steel and alloy--The combustion gravimetric/gasometric method for the determination of non-combined carbon content

GB/T 223.74-1997 — Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content

GB/T 223.75-1991 — Methods for chemical analysis of iron, steel and alloy--The methanol distillation-curcumin photometric method for the determination of boron content

GB/T 223.75-2008 — Iron, steel and alloy -- Determination of boron content -- Methanol distillation-curcumin photometric method

GB/T 223.76-1994 — Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of vanadium content

GB/T 223.77-1994 — Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of calcium content

GB/T 223.78-2000 — Methods for chemical analysis of iron, steel and alloy. Curcumin spectrophotometric method for the determination of boron content

GB/T 223.79-2007 — Iron and steel - Determination of multi - element contents - X - ray fluorescence spectrometry (Routine method)

GB/T 223.80-2007 — Iron, steel and alloy - Determination of trace bismuth and arsenic contents - Hydride generation - atomic fluorescence spectrometric method

GB/T 223.81-2007 — Iron, steel and alloy - Determination of total aluminum and total boron contents - Microwave digestion - inductively coupled plasma mass spectrometric method

GB/T 223.82-2007 — Steel and iron - Determination of hydrogen content - Inert gas impulse fusion heat conductivity method

GB/T 223.82-2018 — Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas

GB/T 223.83-2009 — Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace

GB/T 223.84-2009 — Steel and iron -- Determination of titanium content -- Diantipyrylmethane spectrophotometric method

GB/T 223.85-2009 — Steel and iron -- Determination of sulfur content -- Infrared absorption method after combustion in an induction furnace

GB/T 223.86-2009 — Steel and iron -- Determination of total carbon content -- Infrared absorption method after combustion in an induction furnace

GB/T 223.87-2018 — Iron,steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method

GB/T 223.88-2019 — Iron, steel and alloy - Determination of calcium and magnesium contents - Inductively coupled plasma atomic emission spectrometric method

GB/T 223.89-2019 — Iron, steel and alloy - Determination of tellurium content - Hydride generation-atomic fluorescence spectrometric method

GB/T 223.90-2021 — Iron, steel and alloy - Determination of silicon content - Inductively coupled plasma atomic emission spectrometric method

GB/T 223.91-2021 — Iron, steel and alloy - Determination of copper - 2, 2'-Biquinoline spectrophotometric method

GB/T 223.92-2023 — Iron, steel and alloys - Determination of the lanthanum, cerium, praseodymium, neodymium and samarium contents - Inductively coupled plasma mass spectrometry

GB/T 223.93-2026 — Iron, steel and alloy - Determination of niobium content - PAR spectrophotometric method

Other editions:

GB/T 223.18-1994 (earlier edition)

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Cited by

Editions of GB/T 223.18

EditionTitleRevisionStatus
GB/T 223.18-2026Iron, steel and alloy - Determination of copper content - Iodometric and spectrophotometric methods—Valid
GB/T 223.18-1994Methods for chemical analysis of iron steel and alloy - The sodium thiosulfate separation iodometric method for the determination of copper content—Obsolete
GB 223.18-1982Chemical analysis of iron, steel and alloy--The determination of copper by thiosulfate-iodide method—Obsolete

This page sells the current edition, GB/T 223.18-2026. Earlier editions are listed for reference only.

How to Download GB/T 223.18-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 223.18-2026

$255.00