GB/T 39033-2020Austenitic-ferritic duplex stainless steel wire rods (English PDF)

1 Scope

This Standard specifies the order content, size, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of austenitic-ferritic duplex stainless steel wire rods.

This Standard applies to austenitic-ferritic duplex stainless steel round wire rods whose nominal diameter is 5.0 mm ~ 40.0 mm.

This Standard does not apply to welding wire rods.

2 Normative references

The following documents are indispensable for the application of this document.

For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 222, Permissible tolerances for chemical composition of steel products

GB/T 223.5, Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method

GB/T 223.11, Iron, steel and alloy - Determination of chromium content -

Visual titration or potentiometric titration method

GB/T 223.18, Methods for chemical analysis of iron steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of cupper content

GB/T 223.25, Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content

GB/T 223.26, Iron, steel and alloy - Determination of molybdenum content -

The thiocyanate spectrophotometric method

GB/T 223.28, Methods for chemical analysis of iron, steel and alloy - The alpha- benzoinoxime gravimetric method for the determination of molybdenum content

GB/T 13305, Micrographic method for determining area content of the alpha- phases in stainless steels

GB/T 14981-2009, Dimension shape mass and tolerance for hot-rolled round wire rod

GB/T 17505, Steel and steel products - General technical delivery requirements

GB/T 20066, Steel and iron - Sampling and preparation of samples for the determination of chemical composition

GB/T 20123, Steel and iron - Determination of total carbon and sulfur content

Infrared absorption method after combustion in an induction furnace (routine method)

GB/T 20124, Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas

GB/T 36164, High alloy steel - Determination of multi-element contents - X- ray fluorescence spectrometry (routine method)

YB/T 081, Rule for rounding off of numerical values and judgment of testing values for technical standards of metallurgy

3 Order content

Contracts which order in accordance with this Standard shall at least contain the following contents:

a) reference to this Standard;

b) product name:

c) designation or unified digital code;

d) delivery weight (or quantity);

e) size and shape;

f) delivery status;

g) other special requirements.

a When electroslag steels are batched according to the sub-heat number, except that the surface and size are sampled one by one, the sampling quantity for other inspection items is 1. When it is batched according to the electroslag electrode's smelting master heat number, except that, for chemical composition, 1 is taken for each electroslag furnace number, the sampling quantity for other inspection items is the same as that specified in the table.

7 Inspection rules