Search GB/T
500 GB/T standards in English, from GB/T 2590.7-1981 to GB/T 2900.17-1994, in code order.
- GB/T 2590.7-1981Zirconium and hafnium oxides--Determination of phosphorus content--Ascorbic acid reduced molybdoantimonylphosphoric acid absorption photometric method$79.00
- GB/T 2590.8-1981Zirconium oxide--Determination of hafnium oxide content--Emission spectrophotometric method$79.00
- GB/T 2590.9-1981Hafnium oxide--Determination of zirconium oxide content--X-ray fluorescence spectrometric method$79.00
- GB/T 2592.1-1981Thallium--Determination of copper content--Neocuproine-chloroform extraction photometric method$79.00
- GB/T 2592.10-1981Thallium--Determination of thallium content--EDTA volumetric method$79.00
- GB/T 2592.2-1981Thallium--Determination of iron content--1, 10-phenanthroline photometric method$79.00
- GB/T 2592.3-1981Thallium--Determination of mercury content--Dithizone-carbon tetrachloride extraction photometric method$79.00
- GB/T 2592.4-1981Thallium--Determination of zinc content--Dithizone extraction photometric method$79.00
- GB/T 2592.5-1981Thallium--Determination of cadmium content--Dithizone extraction photometric method$79.00
- GB/T 2592.6-1981Thallium--Determination of lead content--Dithizone extraction photometric method$79.00
- GB/T 2592.7-1981Thallium--Determination of aluminum content--Chromazurol S photometric method$79.00
- GB/T 2592.8-1981Thallium--Determination of indium content--Crystal violet extraction photometric method$79.00
- GB/T 2592.9-1981Thallium--Determination of silicon content--Isoamyl alcohol extraction molybdenum blue absorption photometric method$79.00
- GB/T 2596-1981Tungsten powder and tungsten carbide powder--Determination of specific surface product (average graininess)--Simplified nitrogen absorption method$79.00
- GB/T 2597-1994Heat-rolled window sash steel$169.00
- GB/T 2599-1981Mixed cresol (3-constituent)$169.00
- GB/T 2599-1997Technical cresol$169.00
- GB/T 2600-1981Dimethyl phenol for industrial use$85.00
- GB/T 2600-1997Technical xylenol$85.00
- GB/T 2600-2009Coking xylenol$85.00
- GB/T 2601-1981Products from phenols--Determination of composition--Gas chromatography$135.00
- GB/T 2601-2008The chromatographic method for determination of content of hydroxybenzene$135.00
- GB/T 2602-1981Products from phenols--Determination of intermediate cresol content by the urea method$70.00
- GB/T 2602-2002Method for the urea determinationof m-cresol content of phenol products$70.00
- GB/T 2604-1981o-Cresol--Determination of composition--Gas chromatography$79.00
- GB/T 2608-1987Silica refractory bricks$165.00
- GB/T 2608-2001Silica refractory bricks$165.00
- GB/T 2608-2012Silica refractory bricks$165.00
- GB/T 2608-2025Silica refractory bricks$165.00
- GB/T 2609-1996Microscope--Objectives$255.00
- GB/T 2609-2006Microscopes - Objectives$255.00
- GB/T 2609-2015Microscopes—Objectives$185.00
- GB/T 2609-2026Microscopes - Objectives$255.00
- GB/T 2611-1992General requirements for testing machines$150.00
- GB/T 2611-2007General requirements for testing machines$150.00
- GB/T 2611-2022Testing machines - General requirements$150.00
- GB/T 2612-1989DDZ-2 Series process electronic control system--Operating signal$165.00
- GB/T 2613-1989DDZ-IIISeries process electronic control system--Operating signal$1,235.00
- GB/T 2613-2008Electronic instrument general technical specification for industrial-process measurement and control system$1,235.00
- GB/T 2614-1985Nickel-chromium/Nickel-silicon thermocouple wires and reference table$285.00
- GB/T 2614-1998Nickel-Chromium/Nickel-Silicon thermocouple wires$285.00
- GB/T 2614-2010Nickel-Chromium/Nickel-Silicon thermocouple wires$285.00
- GB/T 2624-1993Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full$870.00
- GB/T 2624.1-2006Full differential pressure device installed in a pipe of circular cross-section measuring fluid flow -- Part 1: General principles and requirements$355.00
- GB/T 2624.1-2026Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full—Part 1: General principles and requirements$255.00
- GB/T 2624.2-2006Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates$285.00
- GB/T 2624.2-2026Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full—Part 2: Orifice plates$255.00
- GB/T 2624.3-2006Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles$245.00
- GB/T 2624.3-2026Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full—Part 3: Nozzles and Venturi nozzles$255.00
- GB/T 2624.4-2006Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes$255.00
- GB/T 2624.4-2026Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes$255.00
- GB/T 2624.5-2024Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone devices$300.00
- GB/T 2624.6-2024Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge devices$300.00
- GB/T 2625-1981Process detection and controlflow chart--Symbols and letter codes$125.00
- GB/T 2626-1992General technical requirements for self-inhalation filtertype dust respirator$169.00
- GB/T 2637-2016Ampoules$145.00
- GB/T 2639-2008Infusion glass bottles$115.00
- GB/T 2640-1990Moulded glass vials for antibiotics$169.00
- GB/T 2649-1989Methods of sampling for mechanical properties tests of welded joint$79.00
- GB/T 2650-1989Method of impact test for welded joint$105.00
- GB/T 2650-2008Impact test methods on welded joints$105.00
- GB/T 2651-1989Method of tensile test for welded joint$180.00
- GB/T 2651-2008Tensile test method on welded joints$180.00
- GB/T 2651-2023Destructive tests on welds in metallic materials - Transverse tensile test$180.00
- GB/T 2652-1989Methods of tensile tests for weld and deposited metal$105.00
- GB/T 2652-2008Tensile test methods on weld and deposited metal$105.00
- GB/T 2652-2022Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints$105.00
- GB/T 2653-1989Methods of bend and compression tests for welded joint$420.00
- GB/T 2653-2008Destructive tests on welds in metallic materials - Bend tests$85.00
- GB/T 2653-2026Destructive tests on welds in metallic materials - Bend tests$420.00
- GB/T 2654-1989Methods of hardness tests for welded joint and surfacing metal$55.00
- GB/T 2654-2008Hardness test methods on welded joints$55.00
- GB/T 2655-1989Method of strain-age sensibility test for welded joint$79.00
- GB/T 2656-1981Weld beads metal and welds--Fatigue tests$79.00
- GB/T 2658-1995A. C. miniature blowers, general specification for$355.00
- GB/T 2658-2015General specification for AC miniature blower$355.00
- GB/T 2659-1994Codes for the representation of names of countries and regiones$505.00
- GB/T 2659-2000Codes for the representation of names of countries and their subdivisions - Part 1: Country code$505.00
- GB/T 2659.1-2022Codes for the representation of names of countries and their subdivisions - Part 1: Country code$800.00
- GB/T 2659.2-2022(Codes of names of countries and regions and their administrative divisions in the world - Part 2: Codes of administrative divisions)$3,275.00
- GB/T 2659.3-2023Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries$240.00
- GB/T 2660-1989Shirts$155.00
- GB/T 2660-1999Shirts$155.00
- GB/T 2660-2008Shirts and blouses$155.00
- GB/T 2660-2017Shirts and blouses$155.00
- GB/T 2662-1981Cotton clothes for both sexes$55.00
- GB/T 2662-1999Cotton wadded clothes$55.00
- GB/T 2662-2008Cotton wadded clothes$55.00
- GB/T 2662-2017Clothes with fillings$55.00
- GB/T 2664-1993Mensuits and coats$145.00
- GB/T 2664-2001Men suits and coats$255.00
- GB/T 2664-2009Men suits and coats$255.00
- GB/T 2664-2017Men's suits and coats$60.00
- GB/T 2664-2026Men's suits and coats$255.00
- GB/T 2665-1993Womensuits and coats$145.00
- GB/T 2665-2001Women suits and coats$255.00
- GB/T 2665-2009Women suits and coats$255.00
- GB/T 2665-2017Women's suits and coats$433.00
- GB/T 2665-2026Women's suits and coats$255.00
- GB/T 2666-1993Women and Mentrousers$115.00
- GB/T 2666-2001Women and Men trousers$255.00
- GB/T 2666-2009Trousers$255.00
- GB/T 2666-2017Trousers$135.00
- GB/T 2666-2026Trousers$255.00
- GB/T 2667-1993Sizes for shirts and blouses$205.00
- GB/T 2667-2002Sizes for shirts and blouses$135.00
- GB/T 2667-2008Sizes for shirts and blouses$135.00
- GB/T 2667-2017Specifications for shirts and blouses$135.00
- GB/T 2668-1993Sizes for zhongshan coats, jackets and trousers$385.00
- GB/T 2668-2002Sizes for zhongshan coats, jackets and trousers$235.00
- GB/T 2668-2008Sizes for coats and suits$235.00
- GB/T 2668-2017Specifications for single,layer apparels and clothing sets$235.00
- GB/T 2670.1-2004Hexalobular socket pan head tapping screws$85.00
- GB/T 2670.1-2017Hexalobular socket pan head tapping screws$85.00
- GB/T 2670.2-2004Hexalobular socket countersunk head tapping screws$65.00
- GB/T 2670.2-2017Hexalobular socket countersunk head tapping screws$65.00
- GB/T 2670.3-2004Hexalobular socket raised countersunk (oval) head tapping screws$85.00
- GB/T 2670.3-2017Hexalobular socket raised countersunk (oval) head tapping screws$85.00
- GB/T 2671.1-2004Hexalobular socket cheese (short) head screws$85.00
- GB/T 2671.1-2017Hexalobular socket cheese (short) head screws$85.00
- GB/T 2671.2-2004Hexalobular socket head cap screws$145.00
- GB/T 2671.2-2017Hexalobular socket head cap screws$145.00
- GB/T 2672-1986Hexagon lobular socket pan head screws$75.00
- GB/T 2672-2004Hexalobular socket pan head screws$75.00
- GB/T 2672-2017Hexalobular socket pan head screws$75.00
- GB/T 2673-1986Hexagon lobular socket countersunk head screws$105.00
- GB/T 2673-2007Fasteners - Hexalobular socket screws - Part 1: Countersunk flat head screws with reduced loadability$105.00
- GB/T 2673.1-2018Hexalobular socket countersunk flat head screws$300.00
- GB/T 2673.1-2025Fasteners - Hexalobular socket screws - Part 1: Countersunk flat head screws with reduced loadability$300.00
- GB/T 2673.2-2020Hexalobular socket high countersunk head screws$105.00
- GB/T 2674-1986Hexagon lobular socket raised countersunk head screws$85.00
- GB/T 2674-2004Hexagon lobular socket raised countersunk head screws$85.00
- GB/T 2674-2017Hexalobular socket raised countersunk head screws$85.00
- GB/T 2675-1981Paper for drawing land maps$85.00
- GB/T 2675-2006Map paper$85.00
- GB/T 2675-2017Map paper$85.00
- GB/T 2676-1981Paper for drawing ocean maps$100.00
- GB/T 2676-2006Chart paper$100.00
- GB/T 2677.1-1993Fibrous raw material of sampling for analysis$65.00
- GB/T 2677.10-1981Paper-making raw material--Determination of integral cellulose content$85.00
- GB/T 2677.10-1995Fibrous raw material--Determination of holocellulose$85.00
- GB/T 2677.2-1993Fibrous raw meterial-Determination of moisture content$85.00
- GB/T 2677.2-2011Determination of moisture content in fibrous raw material$85.00
- GB/T 2677.3-1993Fibrous raw material-Determination of ash$165.00
- GB/T 2677.4-1993Fibrous raw material. Determination of water solubility$79.00
- GB/T 2677.5-1993Fibrous raw material. Determinationof one percent sodium hydroxide solubility$65.00
- GB/T 2677.6-1994Fibrous raw material. Determination of solvent extractives$79.00
- GB/T 2677.8-1994Fibrous raw material. Determination of acid-insoluble lignin$79.00
- GB/T 2677.9-1994Fibrous raw material. Determination of pentosan$85.00
- GB/T 2678.1-1993Pulps - Determination of screened components$95.00
- GB/T 2678.1-2026Pulps - Determination of screened components$195.00
- GB/T 2678.2-1994Paper, board and pulp-Determination of water soluble chlorides (HgNO3 method)$210.00
- GB/T 2678.2-2008Paper, board and pulp - Determination of water soluble chlorides$210.00
- GB/T 2678.2-2021Paper, board and pulps - Determination of water-soluble chlorides$210.00
- GB/T 2678.3-1995Pulps - Determination of chlorine consumption (Degree of delignification)$125.00
- GB/T 2678.3-2026Pulps - Determination of chlorine consumption (Degree of delignification)$255.00
- GB/T 2678.4-1994Pulps and paper--Determination of zero-span tensile properties$85.00
- GB/T 2678.5-1996Paper, board and pulp--Determination of water soluble chlorides (AgNo3 method)$249.00
- GB/T 2678.6-1996Paper, board and pulps. Determination of water soluble sulphates (Conductimetric titration method)$225.00
- GB/T 2678.6-2023Paper, board and pulp - Determination of water-soluble sulfates$225.00
- GB/T 2679.1-1993Paper. Determination of transparent$150.00
- GB/T 2679.1-2013Paper - Determination of transmittance - Diffuse reflectance measurement$150.00
- GB/T 2679.1-2020Paper--Determination of transmittance--Diffuse reflectance measurement$150.00
- GB/T 2679.10-1993paper and board. Compressive strength. Short span test$125.00
- GB/T 2679.11-1993Paper and board. Qualitative analysis of mineral filler and mineral coating. SEM/EDAX method$85.00
- GB/T 2679.11-2008Paper and board - qualitative analysis of mineral filler and mineral coating - SEM/EDAX method$85.00
- GB/T 2679.12-1993Paper and board. Qualitative analysis of mineral filler and mineral coating. Chemical method$255.00
- GB/T 2679.12-2013Paper and board - Qualitative analysis of mineral filler and mineral coating - Chemical method$255.00
- GB/T 2679.13-1996Paper and board--Determination of air permeance (medium range)--Bendtsen method$115.00
- GB/T 2679.14-1996Paper and board - Determination of pore diameter$85.00
- GB/T 2679.14-2026Paper and board - Determination of pore diameter$180.00
- GB/T 2679.15-1997Paper and board--Determination of printing surface strength--Accelerating speed method (electric model)$85.00
- GB/T 2679.16-1997Paper and board--Determination of printing surface strength--Accelerating speed method (pendulum or spring model)$329.00
- GB/T 2679.17-1997Corrugated fibreboard - Determination of edgewise crush resistance - Edge reinforced method$95.00
- GB/T 2679.17-2026Corrugated fibreboard - Determination of edgewise crush resistance - Edge reinforced method$255.00
- GB/T 2679.2-1995Paper and board. Determination of water vapour transmission rate(Dish method)$145.00
- GB/T 2679.2-2015Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (Dish) method$145.00
- GB/T 2679.3-1996Paper and board--Determination of resistance to bending$249.00
- GB/T 2679.4-1994Paper and board-Determination of the roughness (Bendtsen method)$325.00
- GB/T 2679.5-1995Paper and board--Determination of folding endurance (MIT tester)$169.00
- GB/T 2679.6-1996Corrugating medium - Determination of the flat crush resistance after laboratory fluting$125.00
- GB/T 2679.6-2026Corrugating medium - Determination of the flat crush resistance after laboratory fluting$240.00
- GB/T 2679.7-1981Paperboard--Determination of piercing strength$85.00
- GB/T 2679.7-2005Board -- Determination of puncture resistance$85.00
- GB/T 2679.8-1995Paper and board. Determination of compressive strength. Ring crush method$145.00
- GB/T 2679.8-2016Paper and board -- Determination of compressive strength (Ring crush method)$145.00
- GB/T 2679.9-1993Paper and board. Determination of roughness (Print-surface method)$249.00
- GB/T 2680-1994Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors$420.00
- GB/T 2680-2021Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors$420.00
- GB/T 2681-1981Colours of insulated conductors used in electrical assembly devices$169.00
- GB/T 2682-1981Colours of indicator lights and push-buttons used in electrical assembly devices$79.00
- GB/T 2683-1981Test chart for facsimile transmission$55.00
- GB/T 2684-1981Foundry sands and sand mixtures for casting--Method of testing$420.00
- GB/T 2684-2009Test methods for foundry sands and molding mixtures$420.00
- GB/T 2684-2025Test methods for foundry sands and molding mixtures$420.00
- GB/T 2685-1981Powder metallurgy plain bearing--Cylindrical type--Types, dimensions and tolerances$79.00
- GB/T 2686-1981Powder metallurgy plain bearing--Rimed cylindrical type--Types, dimensions and tolerances$79.00
- GB/T 2687-1981Powder metallurgy plain bearing--Spherical type--Types, dimensions and tolerances$79.00
- GB/T 2688-1981Powder metallurgy plain bearing--Technical requirements$110.00
- GB/T 2688-2012Plain bearings - Technical specification for powder metallurgy bearings$110.00
- GB/T 2689.1-1981Constant stress life tests and acceleration life tests. General rules$164.00
- GB/T 2689.2-1981Life test and acceleration life test charts. Evaluation of their Weibull distributions$264.00
- GB/T 2689.3-1981Life test and acceleration life test. Simple linear deflection-free. Evaluation of Weibull distributions$234.00
- GB/T 2689.4-1981Life test and acceleration life test. Optimal linear deflection-free. Evaluation of Weibull distributions$264.00
- GB/T 2690-1981Bamboos$95.00
- GB/T 2690-2000Bamboo timber$95.00
- GB/T 2691-1994Marking codes for resistors and capacitors$185.00
- GB/T 2691-2016Marking codes for resistors and capacitors$185.00
- GB/T 2693-1990Fixed capacitors for use in electronic equipment--Part 1: Generic specification$405.00
- GB/T 2693-2001Fixed capacitors for use in electronic equipment - Part 1: Generic specification$470.00
- GB/T 2694-2003Transmission line tower - Technical requirements for manufacturing$475.00
- GB/T 2694-2010Specification of manufacturing for transmission line tower$475.00
- GB/T 2694-2018Specification of manufacturing for transmission line tower$475.00
- GB/T 2694-2026Specification of manufacturing for transmission line tower$255.00
- GB/T 2696-1987Skeined colour jute threads--Technical requirements and grading stipulation$85.00
- GB/T 2696-2008Jute yarns and threads$85.00
- GB/T 2697-1987Jute yarns and threads for cables--Technical requirements and grading stipulation$79.00
- GB/T 2698-1987Jute yarns for wire rope cores--Technical requirements and grading stipulation$79.00
- GB/T 2699-1987Jute yarns and threads--Packaging and marking$165.00
- GB/T 2700-1987Jute yarns and threads--Acceptance inspection regulations$79.00
- GB/T 2701-1987Jute yarns and threads--Methods of testing$79.00
- GB/T 2703-1981Technical terms for leather shoes industry$415.00
- GB/T 2703-2008Footwear - Vocabulary$415.00
- GB/T 2703-2017Footwear -- Vocabulary$415.00
- GB/T 2705-1992Classification, nomenclature and type for coating products$105.00
- GB/T 2705-2003Classification and nomenclature for coating products$105.00
- GB/T 2728-1981Hygienic standard for Xiaorou (pork, special processed with salt and nitrite)$79.00
- GB/T 2739-1981Hygienic standard for Huangyu (Gymnocypris Przewalskii)$79.00
- GB/T 2766-2006Haemostatic forceps with box joint - General specifications$150.00
- GB/T 2766-2022Surgical instruments - Non-cutting, articulated instruments - General requirements and test methods$150.00
- GB/T 2773-1981Breeding stock--Ningxiang pigs$175.00
- GB/T 2773-2008Ningxiang pig$175.00
- GB/T 2773-2025Ningxiang pig$175.00
- GB/T 2774-1991Manganese metal$105.00
- GB/T 2774-2006Manganese metal$105.00
- GB/T 2775-1993Dimensions of spendle ends for manually operated electronic components$125.00
- GB/T 2775-2016Capacitors and resistors for use in electronic equipment -- Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components$125.00
- GB/T 2778-1992Power take-off pulley for agricultural tractors--Peripheral speed and width$55.00
- GB/T 2778-2007Power take-off pulley for agricultural tractors - Peripheral speed and width$55.00
- GB/T 2779-1992Tractorconnective equipment for trailers Types dimensions and mounting requirements$75.00
- GB/T 2779-2009Tractor's connective equipment for trailers - Types dimensions and mounting requirement$75.00
- GB/T 2780-1992Darawbars for agricultural tractors Types dimensions and mounting requirements$79.00
- GB/T 2780-2008Drawbars for agricultural tractors - Types dimensionsand mounting requirements$79.00
- GB/T 2785-1988Internal combustion engines--Valve springs-Specification$249.00
- GB/T 2787-1981Keyboard for international information processing interchange using the 7-bit coded character set. Alpha-numeric area$209.00
- GB/T 2789-1981Technical requirements for network interface for the analogue microwave relay communication systems$105.00
- GB/T 2790-1995Adhesives, 180-degree peel strength test method for a flexible-bonded-to-rigid test specimen assembly$55.00
- GB/T 2791-1995Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly$35.00
- GB/T 2792-1981The method for determination of peel strength of pressure-sensitive adhesive tape (180-degree peel test)$125.00
- GB/T 2792-1998Test method for peel strength of pressure-sensitive tape at 180 Degree angle$125.00
- GB/T 2792-2014Measurement of peel adhesion properties for adhesive tapes$125.00
- GB/T 2793-1995The method for determination of nonvolatile content of adhesives$75.00
- GB/T 2793-2026Test method for the non-volatile content of adhesives$165.00
- GB/T 2794-1995Determination methods for viscosity of adhesives$90.00
- GB/T 2794-2013Determination for viscosity of adhesives - Single cylinder rotational viscometer method$90.00
- GB/T 2795-1981Methods of analysis for BHC and DDT residues in export rabbit meat$195.00
- GB/T 2795-2008Method for determination of organochlorine and pyrethroid pesticide multiresidues in rabbit tissues - GC-MS method$195.00
- GB/T 2804-1981Modular parts of fixture construction--General features, profiles and dimensions$165.00
- GB/T 2804-2008Modular parts of fixture construction ;general features,profiles and dimensions$165.00
- GB/T 2812-1989Test method for safety helmet$545.00
- GB/T 2812-2006Test method of safety helmet$545.00
- GB/T 2812-2024Head protection - General test methods$545.00
- GB/T 2813-1989Bench drilling machines--Parameters$169.00
- GB/T 2813-2003Bench drilling machines - Parameters$55.00
- GB/T 2814-1989Vertical drilling machines--Parameters$169.00
- GB/T 2814-2003Vertical drilling machines - Parameters$85.00
- GB/T 2815-1989Drilling machines--Spindle noses$169.00
- GB/T 2815-2003Drilling machines--Spindle noses$80.00
- GB/T 2816-1991Submersible pumps for deep well--Types and basic parameters$125.00
- GB/T 2816-2002Submersible pumps for deep well$125.00
- GB/T 2816-2014Submersible pumps for deep wells$125.00
- GB/T 2818-1991Submersible motor for deep well$145.00
- GB/T 2818-2002Submersible motor for deep well$105.00
- GB/T 2818-2014Submersible motors for deep wells$105.00
- GB/T 2819-1995Mobile electric power plant,General specification for$225.00
- GB/T 2820.1-1997Reciprocating internal combustion engine driven alternating current generating sets. Part 1: Application, ratings and performance$300.00
- GB/T 2820.1-2009Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance$300.00
- GB/T 2820.1-2022Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance$300.00
- GB/T 2820.10-2002Reciprocating internal combustion engine driven alternating current generating sets -- Part 10: Measurement of airborne noise by the enveloping surface method$135.00
- GB/T 2820.11-2012Reciprocating internal combustion engine driven alternating current generating sets -- Part 11: Rotary uninterruptible power systems -- Performance requirements and test methods$500.00
- GB/T 2820.12-2002Reciprocating internal combustion engine driven alternating current generating sets -- Part 12: Emergency power supply to safety services$135.00
- GB/T 2820.2-1997Reciprocating internal combustion engine driven alternating current generating sets. Part 2: Engines$205.00
- GB/T 2820.2-2009Reciprocating internal combustion engine driven alternating current generating sets -- Part 2: Engines$205.00
- GB/T 2820.3-1997Reciprocating internal combustion engine driven alternating current generating sets. Part 3: Alternating current generators for generating sets$205.00
- GB/T 2820.3-2009Reciprocating internal combustion engine driven alternating current generating sets -- Part 3: Alternating current generators for generating sets$205.00
- GB/T 2820.4-1997Reciprocating internal combustion engine driven alternating current generating sets. Part 4: Controlgear and switchgear$265.00
- GB/T 2820.4-2009Reciprocating internal combustion engine driven alternating current generating sets -- Part 4: Controlgear and switchgear$265.00
- GB/T 2820.5-1997Reciprocating internal combustion engine driven alternating current generating sets. Part 5: Generating sets$545.00
- GB/T 2820.5-2009Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets$545.00
- GB/T 2820.5-2025Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets$545.00
- GB/T 2820.6-1997Reciprocating internal combustion engine driven alternating current generating sets. Part 6: Test methods$215.00
- GB/T 2820.6-2009Reciprocating internal combustion engine driven alternating current generating sets -- Part 6: Test methods$215.00
- GB/T 2820.7-2002Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design$165.00
- GB/T 2820.7-2024Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design$360.00
- GB/T 2820.8-2002Reciprocating internal combustion engine driven alternating current generating set - Part 8: Requirements and tests for low-power generating sets$195.00
- GB/T 2820.8-2022Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets$195.00
- GB/T 2820.9-2002Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations$270.00
- GB/T 2820.9-2024Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations$270.00
- GB/T 2821-1992Symbols for gear geometrical data$249.00
- GB/T 2821-2003Gear -- Symbols for geometrical data$80.00
- GB/T 2822-1981Standard linear dimensions$85.00
- GB/T 2822-2005Standard linear dimensions$85.00
- GB/T 2826-1981Tie-plates--Technical requirements for 38kg/m to 50kg/m steel rails$79.00
- GB/T 2828.1-2003Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan$125.00
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection$125.00
- GB/T 2828.10-2010Sampling procedures for inspection by attributes -- Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes$210.00
- GB/T 2828.11-2008Sampling procedures for inspection by attributes Part 11: Procedures for assessment of declared quality levels for small population$495.00
- GB/T 2828.2-2008Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection$205.00
- GB/T 2828.3-2008Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures$255.00
- GB/T 2828.4-2008Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels$285.00
- GB/T 2828.5-2011Sampling procedures for inspection by attributes -- Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection$435.00
- GB/T 2829-1987Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of stability for productive process)$1,055.00
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)$1,055.00
- GB/T 2829-2025Sampling procedures and tables for periodic inspection by attributes$1,055.00
- GB/T 2830-1981Rolled-up punched paper tape for data interchange--General requirements$165.00
- GB/T 2831-1981Surface form deviation of optical elements--Inspection methods$375.00
- GB/T 2831-2009Surface form deviation of optical elements$375.00
- GB/T 2832-1996Test method for crushing strength of vitrified pipe$25.00
- GB/T 2833-1996Test method for cross-bending strength of vitrified pipe$55.00
- GB/T 2834-1981Test method for water absorption of vitrified clay pipe$25.00
- GB/T 2834-1998Test method for water absorbtion of vitrified clay pipe$25.00
- GB/T 2835-1981Test method for acid resistance of vitrified clay pipe$55.00
- GB/T 2835-1998Test method for acid resistance of vitrified clay pipe$55.00
- GB/T 2836-1981Test method for hydrostatic proof of vitrified clay pipe$25.00
- GB/T 2836-1998Test method for hydrostatic proof of vitrified clay pipe$25.00
- GB/T 2837-1981Measuring method for size and deviation of vitrified clay pipe$65.00
- GB/T 2837-1998Measuring method for size and deviation of vitrified clay pipe$65.00
- GB/T 2842-1981Test method for lightweight aggregates$590.00
- GB/T 2843-1981The method of tempered glass impact test (227g steel ball test)$165.00
- GB/T 2846-1988Methods of measurement on radio receivers for AM broadcast transmissions$285.00
- GB/T 2846-2011Methods of measurement on radio receivers for AM broadcast transmissions$285.00
- GB/T 2847-1996Pozzolanic materials used for cement production$195.00
- GB/T 2847-2005Pozzolanic materials used for cement production$195.00
- GB/T 2847-2022Pozzolanic materials used for cement production$195.00
- GB/T 2851-2008Sliding guide die sets for stamping dies$255.00
- GB/T 2851.1-1990Sliding guide die sets for press tools--Diagonal pillar sets$169.00
- GB/T 2851.3-1990Sliding guide die sets for press tools--Back pillar sets$169.00
- GB/T 2851.4-1990Sliding guide die sets for press tools--Back pillar sets (narrow)$169.00
- GB/T 2851.5-1990Sliding guide die sets for press tools--Center pillar sets$169.00
- GB/T 2851.6-1990Sliding guide die sets for press tools--Center pillar sets (round)$169.00
- GB/T 2851.7-1990Sliding guide die sets for press tools--Four pillar die sets$169.00
- GB/T 2852-2008Ball-bearing die sets for stamping dies$195.00
- GB/T 2852.1-1990Ball slide die sets for press tools--Diagonal pillar sets$169.00
- GB/T 2852.2-1990Ball slide die sets for press tools--Center pillar sets$169.00
- GB/T 2852.3-1990Ball slide die sets for press tools--Four pillar die sets$169.00
- GB/T 2852.4-1990Ball slide die sets for press tools--Back pillar die sets$169.00
- GB/T 2855.1-1990Holder for sliding guide die sets for press tools--Punch holder for diagonal pillar sets$165.00
- GB/T 2855.1-2008Holders for sliding guide die sets for stamping dies - Part 1: Punch holders for die sets$165.00
- GB/T 2855.10-1990Holder for ball slide die sets for press tools--Die holder for center pillar sets$169.00
- GB/T 2855.11-1990Holder for sliding guide die sets for press tools--Punch holder for center pillar sets (round)$169.00
- GB/T 2855.12-1990Holder for sliding guide die sets for press tools--Die holder for center pillar sets (round)$169.00
- GB/T 2855.13-1990Holder for sliding guide die sets for press tools--Punch holder for four pillar sets$169.00
- GB/T 2855.14-1990Holder for silding guide die sets for press tools--Die holder for four pillar sets$169.00
- GB/T 2855.2-1990Holder for sliding guide die sets for press tools--Die holder for diagonal pillar sets$165.00
- GB/T 2855.2-2008Holders for sliding guide die sets for stamping dies - Part 2: Die holders for die sets$165.00
- GB/T 2855.5-1990Holder for sliding guide die sets for press tools--Punch holder for back pillar sets$169.00
- GB/T 2855.6-1990Holder for ball slide die sets for press tools--Die holder for back pillar sets$169.00
- GB/T 2855.7-1990Holder for sliding guide die sets for press tools--Punch holder for back pillar sets (narrow)$169.00
- GB/T 2855.8-1990Holder for sliding guide die sets for press tools--Die holder for back pillar sets (narrow)$169.00
- GB/T 2855.9-1990Holder for sliding guide die sets for press diess tools--Punch holder for center pillar sets$169.00
- GB/T 2856.1-1990Holder for ball slide die sets for press tools--Punch holder for diagonal pillar sets$125.00
- GB/T 2856.1-2008Holders for ball-bearing die sets for stamping dies - Part 1: Punch holders for die sets$125.00
- GB/T 2856.2-1990Holder for ball slide die sets for press tools--Die holder for diagonal pillar sets$115.00
- GB/T 2856.2-2008Holders for ball-bearing die sets for stamping dies - Part 2: Die holders for die sets$115.00
- GB/T 2856.3-1990Holder for ball silde die sets for press tools--Punch holder for center pillar sets$169.00
- GB/T 2856.4-1990Holder for ball slide die sets for press tools--Die holder for center pillar sets$169.00
- GB/T 2856.5-1990Holder for ball slide die sets for press tools--Punch holder for four pillar sets$169.00
- GB/T 2856.6-1990Holder for ball slide die sets for press tools--Die holder for four pillar sets$169.00
- GB/T 2856.7-1990Holder for ball silde die sets for press tools--Punch holder for back pillar sets$169.00
- GB/T 2856.8-1990Holder for ball slide die sets for press tools--Die holder for back pillar sets$169.00
- GB/T 2861.1-1990Guide unit for press tools--Guide pillars, type A$105.00
- GB/T 2861.1-2008Guide unit for stamping dies - Part 1: Guide pillars for sliding guide$105.00
- GB/T 2861.10-1990Guide unit for press dies--Cage$79.00
- GB/T 2861.10-2008Guide unit for stamping dies - Part 10: Washers$79.00
- GB/T 2861.11-1990Guide unit for press tools--Cylindrical coil compression spring$79.00
- GB/T 2861.11-2008Guide unit for stamping dies - Part 11: Clampers$79.00
- GB/T 2861.12-1990Guide unit for press tools--Guide pillar with taper lead, type A$169.00
- GB/T 2861.13-1990Guide unit for press tools--Guide pillar with taper lead, type B$169.00
- GB/T 2861.14-1990Guide unit for press tools--Bushing$169.00
- GB/T 2861.15-1990Guide unit for press tools--Washer$169.00
- GB/T 2861.16-1990Guide unit for press tools--Clampr$169.00
- GB/T 2861.17-1981Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars$79.00
- GB/T 2861.18-1981Guide unit of cold press dies--Guide pillars with ring fixed$79.00
- GB/T 2861.19-1981Guide unit of cold press dies--Guide bushing with ring fixed$79.00
- GB/T 2861.2-1990Guide unit for press tools--Guide pillars, type B$85.00
- GB/T 2861.2-2008Guide unit for stamping dies - Part 2: Guide pillars for ball-bearing$85.00
- GB/T 2861.20-1981Guide unit of cold press dies--Clamping ring$79.00
- GB/T 2861.3-1990Guide unit for press tools--Guide pillars, type C$115.00
- GB/T 2861.3-2008Guide unit for stamping dies - Part 3: Guide bushes for sliding guide$115.00
- GB/T 2861.4-1981Guide unit of cold press dies--Small guide pillars, type A$85.00
- GB/T 2861.4-2008Guide unit for stamping dies - Part 4: Guide bushes for ball-bearing$85.00
- GB/T 2861.5-1981Guide unit of cold press dies--Small guide pillars, type B$115.00
- GB/T 2861.5-2008Guide unit for stamping dies - Part 5: Cages$115.00
- GB/T 2861.6-1990Guide unit for press tools--Guide bushes, type A$75.00
- GB/T 2861.6-2008Guide unit for stamping dies - Part 6: Cylindrical helical compression springs$75.00
- GB/T 2861.7-1990Guide unit for press tools--Guide bushes, type B$165.00
- GB/T 2861.7-2008Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide$165.00
- GB/T 2861.8-1990Guide unit for press tools--Guide bushes, type C$115.00
- GB/T 2861.8-2008Guide unit for stamping dies - Part 8: Guide pillars with taper lead for ball-bearing$115.00
- GB/T 2861.9-1981Guide unit of cold press dies--Small guide bushing$85.00
- GB/T 2861.9-2008Guide unit for stamping dies - Part 9: Bushings$85.00
- GB/T 2873.3-2017Hydraulic drive connection Port and stud ends with metric and O-ring seals -- Part 3: Light stud ends (L series)$184.00
- GB/T 2877-1981Hydraulic fluid power--Two-port slip-in cartridge valves cavities--Mounting dimensions$345.00
- GB/T 2877-2007Hydraulic fluid power -- Two-port slip-in cartridge valves -- Cavities$345.00
- GB/T 2877.2-2021Hydraulic two-port slip-in cartridge valves - Part 2: Mounting dimensions$330.00
- GB/T 2878-1993Connections for hydraulic fluid power - Ports with truncated housing and stud ends with metric threads - Part 1: Ports with truncated housing$209.00
- GB/T 2878.1-2011Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports$175.00
- GB/T 2878.1-2025Connections for hydraulic fluid power - Ports with truncated housing and stud ends with metric threads - Part 1: Ports with truncated housing$175.00
- GB/T 2878.2-2011Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 2: Heavy-duty stud ends (S series)$195.00
- GB/T 2878.3-2017Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 3: Light-duty stud ends (L series)$234.00
- GB/T 2878.4-2011Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 4: Hex plugs$195.00
- GB/T 2879-1986Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings$270.00
- GB/T 2879-2005Hydraulic fluid power - Cylinder - Housings for piston and rod seals in reciprocating applications - Dimensions and tolerances$270.00
- GB/T 2879-2024Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications$270.00
- GB/T 2880-1981Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions andtolerances of housings--Narrow section series$115.00
- GB/T 2881-1991Technical requirements for silicon metal$210.00
- GB/T 2881-2008Silicon metal$210.00
- GB/T 2881-2014Silicon metal$210.00
- GB/T 2881-2023Silicon metal$210.00
- GB/T 2882-1981Nickel and nickel-copper alloy tube$245.00
- GB/T 2882-2005Nickel and nickel alloys tube$245.00
- GB/T 2882-2013Nickel and nickel alloys tube$245.00
- GB/T 2882-2023Nickel and nickel alloy tubes$245.00
- GB/T 2883-1993Series of off-road rims$165.00
- GB/T 2883-2002Rims series for earth mover$235.00
- GB/T 2883-2015Rims for earth-mover$235.00
- GB/T 2883-2026Rims for earth-mover$255.00
- GB/T 2884.1-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for the Changjiang-3000DWT$105.00
- GB/T 2884.1-2009Integrated barges form for the middle-downstream of the Changjiang - Part 1: Dimensions series of integrated barges in main routes$105.00
- GB/T 2884.12-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for the direct transport in main-branch routes of the middle-downstream of the Changjiang and waterway network-400DWT$165.00
- GB/T 2884.2-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for the Changjiang-2000DWT$75.00
- GB/T 2884.2-2009Integrated barges form for the middle-downstream of the Changjiang - Part 2: Dimensions series of integrated barges for direct transport in main-branch routes and waterway net$75.00
- GB/T 2884.3-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for the direct transport in main-branch routes of the middle-downstream of the Changjiang and waterway network-1000DWT$169.00
- GB/T 2884.5-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for the direct transport in main-branch routes of the middle-downstream of the Changjiang and waterway network-500DWT$165.00
- GB/T 2884.7-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for the direct transport in main-branch routes of the middle-downstream of the Changjiang and waterway network-300DWT$165.00
- GB/T 2884.8-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for branch routes of the Changjiang-200DWT$165.00
- GB/T 2884.9-1996Dimension series of integrated barges for the changjiang waterways--Dimensions of integrated barges for branch routes of the Changjiang-100DWT$165.00
- GB/T 2885.1-1981Solid-bottom wagon for metallic mines--Basic parameters and dimensions$85.00
- GB/T 2885.1-2008Narrow gauge mine cars - Part 1: Solid-end car$85.00
- GB/T 2885.2-1981Tilting wagon for metallic mines--Basic parameters and dimensions$85.00
- GB/T 2885.2-2008Narrow gauge mine cars - Part 2: Dumping car$85.00
- GB/T 2885.3-1981Single-side tipping and curved rail wagon for metallic mines--Basic parameters and dimensions$85.00
- GB/T 2885.3-2008Narrow gauge mine cars - Part 3: Single-side curved rail dumping car$85.00
- GB/T 2885.4-1981Automatic drop bottom wagon for metallic mines--Basic parameters and dimensions$85.00
- GB/T 2885.4-2008Narrow gauge mine cars - Part 4: Drop-bottom car$85.00
- GB/T 2885.5-1981Flat deck wagon for metallic mines--Basic parameters and dimensions$95.00
- GB/T 2885.5-2008Narrow gauge mine cars - Part 5: Flat deck car$95.00
- GB/T 2885.6-1981Material supply wagon for metallic mines--Basic parameters and dimensions$85.00
- GB/T 2885.6-2008Narrow gauge mine cars - Part 6: Supply car$85.00
- GB/T 2886-1992TECHNICAL REOUIREMENTS FOR GROUP 2 DOCUMENT FACSIMILE APARATUS USED IN PUBLIC TELEPHONE NETWORK$395.00
- GB/T 2887-1989Specification for computation center field$105.00
- GB/T 2887-2000Specification for electronic computer field$135.00
- GB/T 2887-2011General specification for computer field$135.00
- GB/T 2888-1991Methods of noise measurement for fans, blowers compressors and roots blowers$75.00
- GB/T 2888-2008Methods of noise measurement for fans blowers compressors and roots blowers$75.00
- GB/T 2889-1994Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties$345.00
- GB/T 2889.1-2008Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties$575.00
- GB/T 2889.1-2020Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties$575.00
- GB/T 2889.2-2020Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear$240.00
- GB/T 2889.3-2020Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication$360.00
- GB/T 2889.4-2011Plain bearings -- Terms, definitions, classification and symbols -- Part 4: Basic symbols$145.00
- GB/T 2889.5-2021Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols$330.00
- GB/T 2889.6-2020Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms$85.00
- GB/T 2889.7-2026Plain bearings - Terms, definitions, classification and symbols - Part 7: Hydrostatic and aerostatic bearings$345.00
- GB/T 2891-1995Performance test methods for facepiece of filfer type respirator$165.00
- GB/T 2892-1995Performance test methods for canister of filter type respirator$169.00
- GB/T 2893.1-2004Graphical symbols - Safety colors and safety signs - Part 1: workplace and public areas of the design principles of safety signs$85.00
- GB/T 2893.1-2013Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings$85.00
- GB/T 2893.2-2008Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels$300.00
- GB/T 2893.2-2020Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels$300.00
- GB/T 2893.3-2010Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols used in safety signs$105.00
- GB/T 2893.4-2013Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials$185.00
- GB/T 2893.5-2020Graphical symbols—Safety colours and safety signs—Part 5: Principles and requirements for the use of safety signs$240.00
- GB/T 2895-1982Determination for acid value of unsaturated polyester resins$135.00
- GB/T 2895-2008Plastics -- Polyester resin -- Determination of partial acid value and total acid value$135.00
- GB/T 2899-1996Barium sulphate, precipitated for industrial use$125.00
- GB/T 2899-2008Barium sulphate precipitated for industrial use$125.00
- GB/T 2899-2017Barium sulphate precipitated for industrial use$125.00
- GB/T 2900.1-1992Electrotechnical terminology--Fundamental terms$355.00
- GB/T 2900.1-2008Electrotechnical terminology - Fundamental terms$355.00
- GB/T 2900.10-1984Electrotechnical terminology--Electric wire and cable$375.00
- GB/T 2900.10-2001Electrotechnical terminology cable$465.00
- GB/T 2900.10-2013Electrotechnical terminology -- Electric cables$465.00
- GB/T 2900.100-2017Electrotechnical terminology -- Superconductivity$650.00
- GB/T 2900.101-2017Electrotechnical terminology -- Risk assessment$125.00
- GB/T 2900.102-2020Electrotechnical terminology--Active assisted living$240.00
- GB/T 2900.103-2020Electrotechnical terminology - Generation, transmission and distribution of electrical energy - Dependability and quality of service of electric power systems$420.00
- GB/T 2900.104-2021Electrotechnical terminology - Micro-electromechanical devices$420.00
- GB/T 2900.105-2022Electrotechnical terminology - Nano-enabled electrotechnical products and systems$240.00
- GB/T 2900.106-2025Electrotechnical terminology - Accessibility$180.00
- GB/T 2900.109-2026Electrotechnical terminology—Marine energy—Wave, tidal and other water current converters$255.00
- GB/T 2900.11-1988Terminology of (secondary) cell or battery$79.00
- GB/T 2900.12-1989Electrotechnical terminology--Surge arrester$485.00
- GB/T 2900.12-2008Electrotechnical terminology - surge arresters,low-voltage surge protective devices and components$485.00
- GB/T 2900.13-2008Electrotechnical terminology -- Dependability and quality of service$590.00
- GB/T 2900.15-1982Electrotechnical terminology--Transformer, instrument transformer, voltage regulator and reactor$169.00
- GB/T 2900.15-1997Electrotechnical terminology. Transformer, instrument transformer, voltage regulator and reactor$500.00
- GB/T 2900.16-1996Electrotechnical terminology. Power capacitors$455.00
- GB/T 2900.16-2025Electrotechnical terminology - Power capacitors$455.00
- GB/T 2900.17-1994Electrotechnical terminologies. Electrical relays$480.00
All GB/T ranges
- GB/T 1.1-1993 – GB/T 245-2016
- GB/T 246-1982 – GB/T 601-2002
- GB/T 601-2016 – GB/T 915-1995
- GB/T 915-2010 – GB/T 1303-1977
- GB/T 1303.1-1998 – GB/T 1617-1989
- GB/T 1617-2002 – GB/T 1927.9-2021
- GB/T 1928-1991 – GB/T 2399-2003
- GB/T 2399-2014 – GB/T 2590.6-1981
- GB/T 2590.7-1981 – GB/T 2900.17-1994
- GB/T 2900.17-2009 – GB/T 3048.4-1994
- GB/T 3048.4-2007 – GB/T 3280-1992
- GB/T 3280-2007 – GB/T 3533.2-1984
- GB/T 3533.2-2017 – GB/T 3789.14-1991
- GB/T 3789.15-1991 – GB/T 3903.6-2017
- GB/T 3903.6-2024 – GB/T 4148-1993
- GB/T 4148-2003 – GB/T 4334-2008
- GB/T 4334-2020 – GB/T 4649-2008
- GB/T 4649-2018 – GB/T 4752-1984
- GB/T 4752-2002 – GB/T 4955-1997
- GB/T 4955-2005 – GB/T 5033-1985
- GB/T 5034-1985 – GB/T 5169.8-1985
- GB/T 5169.9-1993 – GB/T 5340.3-2006
- GB/T 5341-1985 – GB/T 5585.1-2005
- GB/T 5585.1-2018 – GB/T 5824-2008
- GB/T 5824-2021 – GB/T 6102.2-1985
- GB/T 6102.2-2009 – GB/T 6323.4-1994
- GB/T 6323.5-1994 – GB/T 6553-2014
- GB/T 6553-2024 – GB/T 6742-2007
- GB/T 6743-1986 – GB/T 6988.6-1993
- GB/T 6989-1986 – GB/T 7284-1998
- GB/T 7284-2016 – GB/T 7596-2000
- GB/T 7596-2008 – GB/T 7739.6-2021
- GB/T 7739.7-2007 – GB/T 8059.2-1987
- GB/T 8059.2-1995 – GB/T 8303-1987
- GB/T 8303-2002 – GB/T 8638.1-1988
- GB/T 8638.10-1988 – GB/T 8995-2026
- GB/T 8996-1988 – GB/T 9275-1988
- GB/T 9275-2008 – GB/T 9652.1-1997
- GB/T 9652.1-2007 – GB/T 9938-2013
- GB/T 9941-1988 – GB/T 10178-1988
- GB/T 10178-2006 – GB/T 10512-1989
- GB/T 10512-2008 – GB/T 10870-1989
- GB/T 10870-2001 – GB/T 11168-2009
- GB/T 11170-1989 – GB/T 11464-2013
- GB/T 11465-1989 – GB/T 11896-1989
- GB/T 11897-1989 – GB/T 12196-1990
- GB/T 12197-1990 – GB/T 12510-2015
- GB/T 12511-1990 – GB/T 12690.6-2017
- GB/T 12690.7-1990 – GB/T 12959-2008
- GB/T 12959-2024 – GB/T 13210-2024
- GB/T 13211-1991 – GB/T 13459-1992
- GB/T 13459-2008 – GB/T 13663.2-2018
- GB/T 13663.3-2018 – GB/T 13869-2008
- GB/T 13869-2017 – GB/T 14074.2-1993
- GB/T 14074.3-1993 – GB/T 14328.4-1993
- GB/T 14329-2008 – GB/T 14506.15-1993
- GB/T 14506.15-2010 – GB/T 14684-2011
- GB/T 14684-2022 – GB/T 14926.21-1994
- GB/T 14926.21-2001 – GB/T 15079.3-1994
- GB/T 15079.4-1994 – GB/T 15328-1994
- GB/T 15328-2009 – GB/T 15590-1995
- GB/T 15590-2008 – GB/T 15806-1995
- GB/T 15806-2006 – GB/T 16085-1995
- GB/T 16086-1995 – GB/T 16478.4-1996
- GB/T 16478.5-1996 – GB/T 16674.2-2016
- GB/T 16674.3-2023 – GB/T 16895.1-2008
- GB/T 16895.10-2001 – GB/T 17149.4-1997
- GB/T 17149.5-1997 – GB/T 17367-1998
- GB/T 17368-1998 – GB/T 17607-1998
- GB/T 17608-1998 – GB/T 17783-1999
- GB/T 17783-2019 – GB/T 17980.143-2004
- GB/T 17980.144-2004 – GB/T 18122-2000
- GB/T 18123-2000 – GB/T 18311.2-2026
- GB/T 18311.20-2007 – GB/T 18508-2001
- GB/T 18508-2014 – GB/T 18779.3-2023
- GB/T 18779.4-2020 – GB/T 18932.11-2002
- GB/T 18932.12-2002 – GB/T 19208-2003
- GB/T 19208-2008 – GB/T 19449.4-2013
- GB/T 19450-2004 – GB/T 19699-2023
- GB/T 19700-2005 – GB/T 19952-2005
- GB/T 19953-2005 – GB/T 20168-2006
- GB/T 20168-2017 – GB/T 20443-2006
- GB/T 20444-2006 – GB/T 20736-2006
- GB/T 20736-2025 – GB/T 20975.15-2008
- GB/T 20975.15-2020 – GB/T 21283.5-2008
- GB/T 21283.6-2015 – GB/T 21623-2008
- GB/T 21624-2008 – GB/T 21930-2008
- GB/T 21931.1-2008 – GB/T 22260-2023
- GB/T 22261-2008 – GB/T 22527-2008
- GB/T 22528-2008 – GB/T 22838.2-2009
- GB/T 22838.3-2009 – GB/T 23274.7-2009
- GB/T 23274.8-2009 – GB/T 23576-2024
- GB/T 23577-2009 – GB/T 23901.1-2009
- GB/T 23901.1-2019 – GB/T 24301-2009
- GB/T 24302-2009 – GB/T 24639-2009
- GB/T 24640-2009 – GB/T 24975.3-2010
- GB/T 24975.4-2010 – GB/T 25271-2010
- GB/T 25272-2010 – GB/T 25707-2010
- GB/T 25707-2025 – GB/T 26052-2010
- GB/T 26052-2022 – GB/T 26412-2010
- GB/T 26413-2010 – GB/T 26803.1-2011
- GB/T 26803.2-2011 – GB/T 27534.2-2025
- GB/T 27534.3-2011 – GB/T 27919-2011
- GB/T 27920.1-2011 – GB/T 28410-2012
- GB/T 28410-2025 – GB/T 28819-2023
- GB/T 28821-2012 – GB/T 29229-2012
- GB/T 29230.1-2012 – GB/T 29618.1-2013
- GB/T 29618.1-2017 – GB/T 30095-2013
- GB/T 30096-2013 – GB/T 30420.1-2013
- GB/T 30420.2-2019 – GB/T 30845.2-2021
- GB/T 30846-2014 – GB/T 31230.3-2014
- GB/T 31230.4-2014 – GB/T 31586.2-2015
- GB/T 31587-2015 – GB/T 32065.8-2020
- GB/T 32065.9-2019 – GB/T 32413-2015
- GB/T 32414-2015 – GB/T 32800.5-2023
- GB/T 32800.6-2023 – GB/T 33162-2016
- GB/T 33163-2016 – GB/T 33525-2025
- GB/T 33526-2017 – GB/T 33887-2017
- GB/T 33888-2017 – GB/T 34308.2-2017
- GB/T 34308.3-2017 – GB/T 34690.7-2017
- GB/T 34690.8-2017 – GB/T 35111-2017
- GB/T 35112-2017 – GB/T 35521-2017
- GB/T 35522-2017 – GB/T 35966-2018
- GB/T 35967-2018 – GB/T 36410.4-2018
- GB/T 36410.5-2018 – GB/T 36818-2018
- GB/T 36819-2018 – GB/T 37270.2-2018
- GB/T 37270.3-2018 – GB/T 37721-2019
- GB/T 37722-2019 – GB/T 38136-2019
- GB/T 38137-2019 – GB/T 38593-2020
- GB/T 38594-2020 – GB/T 39039-2020
- GB/T 39040-2020 – GB/T 39493-2020
- GB/T 39494-2020 – GB/T 39914-2021
- GB/T 39915-2021 – GB/T 40392-2021
- GB/T 40393-2021 – GB/T 40837-2021
- GB/T 40838-2021 – GB/T 41329-2022
- GB/T 41330-2022 – GB/T 41805-2022
- GB/T 41806-2022 – GB/T 42272-2022
- GB/T 42273-2022 – GB/T 42890-2023
- GB/T 42891-2023 – GB/T 43448-2023
- GB/T 43449-2023 – GB/T 44014-2024
- GB/T 44020-2024 – GB/T 44596-2024
- GB/T 44597-2024 – GB/T 45169-2025
- GB/T 45170-2024 – GB/T 45677-2025
- GB/T 45678-2025 – GB/T 46128-2025
- GB/T 46129-2025 – GB/T 46594-2026
- GB/T 46595-2025 – GB/T 47055-2026
- GB/T 47056-2026 – GB/T 47534-2026
- GB/T 47535-2026 – GB/T 48000.3-2026
- GB/T 48000.4-2026 – GB/T 48446-2026
- GB/T 48447-2026 – GB/T 51013-2014
- GB/T 51015-2014 – GB/T 30685-2024
- GB/T 30819-2024 – GB/T 43746.3-2024
- GB/T 43753.1-2024 – GB/T 9914.2-2013