GB/T standards: GB/T 2423.28-2005 to GB/T 3274-2017

500 standards in English, in code order.

1. GB/T 2423.28-2005Environmental testing for electric and electronic products - Part 2: Test methods - Test T: Soldering$195.00
2. GB/T 2423.3-2016Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state$115.00
3. GB/T 2423.30-2013Environmental testing - Part 2: Test methods - Test XA and guidance: Immersion in cleaning solvents$215.00
4. GB/T 2423.32-2008Environmental testing for electric and electronic products - Part 2: Test Methods - Test Ta: Solderability test by the wetting balance method$115.00
5. GB/T 2423.33-2021Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid$160.00
6. GB/T 2423.34-2024Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test$415.00
7. GB/T 2423.35-2019Environmental testing - Part 2: Tests and guidance - Combined climatic (temperature / humidity) and dynamic (vibration / shock) tests$245.00
8. GB/T 2423.37-2006Environmental testing for electric and electronic products - Part 2: Test methods - Test L: Dust and sand$560.00
9. GB/T 2423.38-2021Environmental testing - Part 2: Test methods - Test R: Water test method and guidance$620.00
10. GB/T 2423.39-2018Environmental testing - Part 2: Test methods - Test Ee and guidance: Loose cargo testing including bounce$245.00
11. GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)$45.00
12. GB/T 2423.41-2013Environmental testing - Part 2: Test methods - Wind pressure$200.00
13. GB/T 2423.43-2008Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests$180.00
14. GB/T 2423.45-2012Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence$260.00
15. GB/T 2423.47-2018Environmental testing - Part 2: Test methods - Test Fg: Acoustic vibration$305.00
16. GB/T 2423.48-2018Environmental testing - Part 2: Test methods - Test Ff: Vibration - Time-history and sine-beat method$545.00
17. GB/T 2423.5-2019Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock$365.00
18. GB/T 2423.50-2025Environmental testing - Part 2: Test methods - Test Cy: Damp heat, steady state, accelerated test primarily intended for components$65.00
19. GB/T 2423.51-2020Environmental testing - Part 2: Test methods - Test Ke: Flowing mixed gas corrosion test$245.00
20. GB/T 2423.52-2003Environmental testing for electric and electronic products - Part 2: Test methods - Test 77: Body strength and impact shock$75.00
21. GB/T 2423.54-2005Environmental testing for electric and electronic products - Part 2: Test methods - Test Xc: Fluid contamination$120.00
22. GB/T 2423.54-2022Environmental testing—Part 2: Test methods—Test Xc: Fluid contamination$235.00
23. GB/T 2423.56-2023Environmental testing - Part 2: Test methods - Test Fh: Vibration, broadband random and guidance$545.00
24. GB/T 2423.57-2008Environmental testing for electric and electronic products - Part 2: Tests - Test Ei: Shock - Shock response spectrum synthesis$360.00
25. GB/T 2423.58-2008Environmental testing for electric and electronic products - Part 2: Test methods - Test Fi: Vibration - Mixed mode$350.00
26. GB/T 2423.59-2008Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration (random)$260.00
27. GB/T 2423.6-1995Environmental testing for electric and electronic products - Part 2: Test methods - Test Eb and guidance: Bump$110.00
28. GB/T 2423.60-2008Environmental testing - Part 2: Test methods - Test U: Robustness of terminations and integral mounting devices$330.00
29. GB/T 2423.61-2018Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen$215.00
30. GB/T 2423.62-2018Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test$790.00
31. GB/T 2423.63-2019Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration (mixed mode)$245.00
32. GB/T 2423.64-2023Environmental testing - Part 2: Test methods - Test Fj: Vibration - Long time history replication$295.00
33. GB/T 2423.65-2024Environmental testing - Part 2: Test methods - Combined salt mist, temperature, humidity and solar radiation test$305.00
34. GB/T 2423.66-2025Environmental testing — Part 2: Test methods — Test: Combined temperature/humidity/static load$245.00
35. GB/T 2423.67-2026Environmental testing — Part 2: Test methods — Test Kf: Salt mist with controlled humidity$305.00
36. GB/T 2423.68-2026Environmental testing — Part 2: Test methods — Test: Icing and melting cycle test$305.00
37. GB/T 2423.7-2018Environmental testing - Part 2: Test methods - Test Ec: Rough handling shocks, primarily for equipment-type specimens$215.00
38. GB/T 2423.8-1995Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall$120.00
39. GB/T 2424.10-2012Environmental testing - General guidance of accelerated testing for atmospheric corrosion$130.00
40. GB/T 2424.11-2013Environmental testing -- Part 2: Test methods -- Guidance to test Kc: Sulphur dioxide test for contacts and connections$140.00
41. GB/T 2424.12-2014Environmental testing -- Part 2: Test methods -- Guidance to test Kd: Hydrogen sulphide test for contacts and connections$125.00
42. GB/T 2424.15-2008Environmental testing -- Guide for combined temperature/low air pressure tests$269.00
43. GB/T 2424.25-2024Environmental testing - Part 3: Test guidance - Seismic test methods$635.00
44. GB/T 2424.5-2021Environmental testing - Part 3: Supporting documentation and guidance - Confirmation of the performance of temperature chambers$245.00
45. GB/T 2424.6-2021Environmental testing - Part 3: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers$260.00
46. GB/T 2424.7-2024Environmental testing - Part 3: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)$230.00
47. GB/T 2426-2026Livestock and poultry breeds (synthetic lines) — Xinjiang fine-wool sheep$110.00
48. GB/T 2428-2024Head-face dimensions of adults$230.00
49. GB/T 2430-2008Standard test method for freezing point of aviation fuels$65.00
50. GB/T 2440-2017Urea$130.00
51. GB/T 2441.1-2008Determination of urea - Part 1: Total nitrogen content$90.00
52. GB/T 2441.2-2010Determination of urea - Part 2: Biuret content - Spectrophotometric method$90.00
53. GB/T 2441.3-2010Determination of urea - Part 3: Water content - Karl Fischer method$70.00
54. GB/T 2441.5-2010Determination of urea - Part 5: Alkalinity - Titrimetric method$70.00
55. GB/T 2441.6-2010Determination of urea - Part 6: Water insoluble matter content - Weight method$110.00
56. GB/T 2441.7-2010Determination of urea - Part 7: Particle size - Sieve method$70.00
57. GB/T 2441.8-2010Determination of urea - Part 8: Sulphate content - Visible turbidimetric method$70.00
58. GB/T 2441.9-2010Determination of urea - Part 9: Methylenediurea content - Spectrophotometric method$90.00
59. GB/T 2449.1-2021Sulphur for industrial use—Part 1: Solid product$335.00
60. GB/T 2449.2-2015Sulphur for industrial use—Part 2: Liquid product$70.00
61. GB/T 2460-1996Pyrites and concentrate--Methods for sampling and preparation sample$75.00
62. GB/T 2463-2008Pyrites and concentrate - Determination of total iron content - Cerium sulfate volumetric and potassium dichromate volumetric methods$100.00
63. GB/T 2466-2008Pyrites and concentrate - Determination of copper content - Flame atomic absorption spectrometric and spectrophotometric methods$90.00
64. GB/T 2467-2008Pyrites and concentrate - Determination of lead content - Flame atomic absorption spectrometric and EDTA volumetric methods$100.00
65. GB/T 2468-2008Pyrites and concentrate - Determination of zinc content - Flame atomic absorption spectrometric and spectrphotometric methods$100.00
66. GB/T 2476-2025Conventional abrasive — Symbols$125.00
67. GB/T 2478-2022Conventional abrasive—Brown fused alumina$110.00
68. GB/T 2479-2022Conventional abrasive—White fused alumina$110.00
69. GB/T 2480-2022Conventional abrasive—Silicon carbide$80.00
70. GB/T 2481-1983Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220$344.00
71. GB/T 2481.1-2025Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220$230.00
72. GB/T 2481.2-2020Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits$425.00
73. GB/T 2490-2018Bonded abrasive products—Hardness grade measurement$150.00
74. GB/T 2493-2023Test method for rotating strength of abrasive products$245.00
75. GB/T 2495-2017Bonded abrasive products—Packing$150.00
76. GB/T 2496-2008Coupling with flexible ring$200.00
77. GB/T 2497-2023Charge air coolers for marine diesel engines$275.00
78. GB/T 2501-2010Connection dimensions and mating face of marine flanges$200.00
79. GB/T 2518-2019Continuously hot-dip zinc and zinc alloy coated steel sheet and strip$350.00
80. GB/T 2520-2017Cold-reduced electrolytic tinplate$135.00
81. GB/T 2520-2026Cold-reduced electrolytic tinplate$1,190.00
82. GB/T 2521.1-2016Cold-rolled electrical steel delivered in the fully-processed state -- Part 1: Grain non-oriented steel strip (sheet)$120.00
83. GB/T 2521.2-2016Cold-rolled electrical steel delivered in the fully-processed state -- Part 2: Grain-oriented steel strip (sheet)$355.00
84. GB/T 2521.2-2025Cold-rolled electrical steel delivered in the fully-processed state - Part 2: Grain-oriented steel strip(sheet)$355.00
85. GB/T 2522-2017Methods of test for the determination of coating insulation resistance and coating adhesion of electrical strip and sheet$80.00
86. GB/T 2522-2026Methods of measurement of the coating insulation resistance and coating adhesion of electrical steel strip and sheet$200.00
87. GB/T 2523-2022Measuring methods for the surface roughness, peak count and waviness of cold-rolled metal sheet and strip$245.00
88. GB/T 2524-2019Titanium sponge$210.00
89. GB/T 2526-2020Gadolinium oxide$95.00
90. GB/T 2527-2008Cemented carbide inserts for mining and oil-field bits$160.00
91. GB/T 2529-2012Copper sheets and bars for electrical conduction purpose$110.00
92. GB/T 2532-2014Brass strip for heat-exchanger water tank and header$130.00
93. GB/T 2539-2023Determination of melting point of petroleum waxes—Cooling curve method$150.00
94. GB/T 2541-1981Petroleum products--Computation table for viscosity indices$12,740.00
95. GB/T 2542-2012Test methods for wall bricks$300.00
96. GB/T 2543.1-2015Textiles -- Determination of twist in yarns -- Part 1: Direct counting method$205.00
97. GB/T 2546.1-2022Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications$215.00
98. GB/T 2546.2-2022Plastics - Polypropylene(PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties$215.00
99. GB/T 2547-2026Plastics — Sampling methods$260.00
100. GB/T 2550-2025Gas welding equipment - Rubber hoses for welding, cutting and allied processes$305.00
101. GB/T 2559-2005Analysis of lignite wax$445.00
102. GB/T 2565-2014Determination of grindability index of coal -- Hardgrove method$60.00
103. GB/T 2566-2010Determination of transmittance for low rank coal$50.00
104. GB/T 2567-2008Test methods for properties of resin casting body$125.00
105. GB/T 2572-2005Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion$85.00
106. GB/T 2573-2008Test method for aging properties of glass fiber reinforced plastics$170.00
107. GB/T 2577-2005Test method for resin content of glass fiber reinforced plastics$80.00
108. GB/T 2585-2021Hot-rolled steel rails for railway$920.00
109. GB/T 2587-2009General principles for energy balance of equipment using energy$114.00
110. GB/T 2589-2020General rules for calculation of the comprehensive energy consumption$140.00
111. GB/T 2601-2008The chromatographic method for determination of content of hydroxybenzene$140.00
112. GB/T 2602-2002Method for the urea determinationof m-cresol content of phenol products$65.00
113. GB/T 2608-2025Silica refractory bricks$170.00
114. GB/T 2611-2022Testing machines - General requirements$155.00
115. GB/T 2614-2010Nickel-Chromium/Nickel-Silicon thermocouple wires$290.00
116. GB/T 2624.5-2024Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone devices$290.00
117. GB/T 2624.6-2024Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge devices$290.00
118. GB/T 2651-2023Destructive tests on welds in metallic materials - Transverse tensile test$185.00
119. GB/T 2652-2022Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints$110.00
120. GB/T 2658-2015General specification for AC miniature blower$360.00
121. GB/T 2659.1-2022Codes for the representation of names of countries and their subdivisions - Part 1: Country code$890.00
122. GB/T 2659.2-2022(Codes of names of countries and regions and their administrative divisions in the world - Part 2: Codes of administrative divisions)$3,355.00
123. GB/T 2660-2017Shirts and blouses$58.00
124. GB/T 2662-2017Clothes with fillings$50.00
125. GB/T 2664-2017Men's suits and coats$60.00
126. GB/T 2664-2026Men's suits and coats$260.00
127. GB/T 2665-2017Women's suits and coats$438.00
128. GB/T 2665-2026Women's suits and coats$260.00
129. GB/T 2666-2017Trousers$140.00
130. GB/T 2666-2026Trousers$260.00
131. GB/T 2667-2017Specifications for shirts and blouses$140.00
132. GB/T 2668-2017Specifications for single，layer apparels and clothing sets$240.00
133. GB/T 2670.1-2017Hexalobular socket pan head tapping screws$90.00
134. GB/T 2670.2-2017Hexalobular socket countersunk head tapping screws$60.00
135. GB/T 2671.1-2017Hexalobular socket cheese (short) head screws$90.00
136. GB/T 2671.2-2017Hexalobular socket head cap screws$150.00
137. GB/T 2672-2017Hexalobular socket pan head screws$70.00
138. GB/T 2673-2007Fasteners - Hexalobular socket screws - Part 1: Countersunk flat head screws with reduced loadability$334.00
139. GB/T 2673.2-2020Hexalobular socket high countersunk head screws$110.00
140. GB/T 2674-2017Hexalobular socket raised countersunk head screws$90.00
141. GB/T 2675-2017Map paper$90.00
142. GB/T 2676-2006Chart paper$105.00
143. GB/T 2677.10-1995Fibrous raw material--Determination of holocellulose$90.00
144. GB/T 2677.2-2011Determination of moisture content in fibrous raw material$90.00
145. GB/T 2678.1-2026Pulps - Determination of screened components$200.00
146. GB/T 2678.2-2021Paper, board and pulps - Determination of water-soluble chlorides$215.00
147. GB/T 2678.4-1994Pulps and paper--Determination of zero-span tensile properties$90.00
148. GB/T 2678.6-2023Paper, board and pulp - Determination of water-soluble sulfates$230.00
149. GB/T 2679.1-2020Paper--Determination of transmittance--Diffuse reflectance measurement$155.00
150. GB/T 2679.11-2008Paper and board - qualitative analysis of mineral filler and mineral coating - SEM/EDAX method$90.00
151. GB/T 2679.12-2013Paper and board - Qualitative analysis of mineral filler and mineral coating - Chemical method$260.00
152. GB/T 2679.14-2026Paper and board - Determination of pore diameter$185.00
153. GB/T 2680-2021Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors$425.00
154. GB/T 2683-1981Test chart for facsimile transmission$50.00
155. GB/T 2684-2025Test methods for foundry sands and molding mixtures$425.00
156. GB/T 2688-2012Plain bearings - Technical specification for powder metallurgy bearings$120.00
157. GB/T 2694-2018Specification of manufacturing for transmission line tower$480.00
158. GB/T 2696-2008Jute yarns and threads$90.00
159. GB/T 2703-2017Footwear -- Vocabulary$420.00
160. GB/T 2705-2003Classification and nomenclature for coating products$110.00
161. GB/T 2766-2022Surgical instruments - Non-cutting, articulated instruments - General requirements and test methods$155.00
162. GB/T 2773-2025Ningxiang pig$180.00
163. GB/T 2774-2006Manganese metal$110.00
164. GB/T 2778-2007Power take-off pulley for agricultural tractors - Peripheral speed and width$50.00
165. GB/T 2779-2009Tractor's connective equipment for trailers - Types dimensions and mounting requirement$70.00
166. GB/T 2780-2008Drawbars for agricultural tractors - Types dimensionsand mounting requirements$74.00
167. GB/T 2792-2014Measurement of peel adhesion properties for adhesive tapes$120.00
168. GB/T 2793-1995The method for determination of nonvolatile content of adhesives$160.00
169. GB/T 2793-2026Test method for the non-volatile content of adhesives$170.00
170. GB/T 2795-2008Method for determination of organochlorine and pyrethroid pesticide multiresidues in rabbit tissues - GC-MS method$200.00
171. GB/T 2804-2008Modular parts of fixture construction ；general features，profiles and dimensions$170.00
172. GB/T 2812-2024Head protection - General test methods$635.00
173. GB/T 2815-2003Drilling machines--Spindle noses$75.00
174. GB/T 2816-2014Submersible pumps for deep wells$130.00
175. GB/T 2818-2014Submersible motors for deep wells$110.00
176. GB/T 2819-1995Mobile electric power plant，General specification for$230.00
177. GB/T 2820.1-2022Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance$305.00
178. GB/T 2820.11-2012Reciprocating internal combustion engine driven alternating current generating sets -- Part 11: Rotary uninterruptible power systems -- Performance requirements and test methods$575.00
179. GB/T 2820.3-2009Reciprocating internal combustion engine driven alternating current generating sets -- Part 3: Alternating current generators for generating sets$195.00
180. GB/T 2820.5-2025Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets$620.00
181. GB/T 2820.7-2024Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design$355.00
182. GB/T 2820.8-2022Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets$200.00
183. GB/T 2820.9-2024Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations$265.00
184. GB/T 2822-2005Standard linear dimensions$80.00
185. GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection$145.00
186. GB/T 2828.11-2008Sampling procedures for inspection by attributes Part 11: Procedures for assessment of declared quality levels for small population$500.00
187. GB/T 2828.2-2008Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection$200.00
188. GB/T 2829-2025Sampling procedures and tables for periodic inspection by attributes$1,100.00
189. GB/T 2836-1998Test method for hydrostatic proof of vitrified clay pipe$20.00
190. GB/T 2847-2022Pozzolanic materials used for cement production$200.00
191. GB/T 2851-2008Sliding guide die sets for stamping dies$260.00
192. GB/T 2852-2008Ball-bearing die sets for stamping dies$200.00
193. GB/T 2855.1-2008Holders for sliding guide die sets for stamping dies - Part 1: Punch holders for die sets$170.00
194. GB/T 2855.2-2008Holders for sliding guide die sets for stamping dies - Part 2: Die holders for die sets$170.00
195. GB/T 2856.1-2008Holders for ball-bearing die sets for stamping dies - Part 1: Punch holders for die sets$130.00
196. GB/T 2856.2-2008Holders for ball-bearing die sets for stamping dies - Part 2: Die holders for die sets$120.00
197. GB/T 2861.1-2008Guide unit for stamping dies - Part 1: Guide pillars for sliding guide$110.00
198. GB/T 2861.10-2008Guide unit for stamping dies - Part 10: Washers$74.00
199. GB/T 2861.11-2008Guide unit for stamping dies - Part 11: Clampers$74.00
200. GB/T 2861.2-2008Guide unit for stamping dies - Part 2: Guide pillars for ball-bearing$80.00
201. GB/T 2861.3-2008Guide unit for stamping dies - Part 3: Guide bushes for sliding guide$120.00
202. GB/T 2861.4-2008Guide unit for stamping dies - Part 4: Guide bushes for ball-bearing$80.00
203. GB/T 2861.5-2008Guide unit for stamping dies - Part 5: Cages$120.00
204. GB/T 2861.6-2008Guide unit for stamping dies - Part 6: Cylindrical helical compression springs$70.00
205. GB/T 2861.7-2008Guide unit for stamping dies - Part 7: Guide pillars with taper lead for sliding guide$170.00
206. GB/T 2861.8-2008Guide unit for stamping dies - Part 8: Guide pillars with taper lead for ball-bearing$120.00
207. GB/T 2861.9-2008Guide unit for stamping dies - Part 9: Bushings$80.00
208. GB/T 2877.2-2021Hydraulic two-port slip-in cartridge valves - Part 2: Mounting dimensions$335.00
209. GB/T 2878.2-2011Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 2: Heavy-duty stud ends (S series)$185.00
210. GB/T 2878.3-2017Connections for hydraulic fluid power -- Ports and stud ends with metric threads and O-ring sealing -- Part 3: Light-duty stud ends (L series)$234.00
211. GB/T 2879-2024Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications$260.00
212. GB/T 2880-1981Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions andtolerances of housings--Narrow section series$120.00
213. GB/T 2881-2023Silicon metal$215.00
214. GB/T 2882-2023Nickel and nickel alloy tubes$260.00
215. GB/T 2884.1-2009Integrated barges form for the middle-downstream of the Changjiang - Part 1: Dimensions series of integrated barges in main routes$110.00
216. GB/T 2884.2-2009Integrated barges form for the middle-downstream of the Changjiang - Part 2: Dimensions series of integrated barges for direct transport in main-branch routes and waterway net$70.00
217. GB/T 2885.1-2008Narrow gauge mine cars - Part 1: Solid-end car$90.00
218. GB/T 2885.2-2008Narrow gauge mine cars - Part 2: Dumping car$90.00
219. GB/T 2885.3-2008Narrow gauge mine cars - Part 3: Single-side curved rail dumping car$90.00
220. GB/T 2885.4-2008Narrow gauge mine cars - Part 4: Drop-bottom car$90.00
221. GB/T 2885.5-2008Narrow gauge mine cars - Part 5: Flat deck car$100.00
222. GB/T 2885.6-2008Narrow gauge mine cars - Part 6: Supply car$90.00
223. GB/T 2887-2011General specification for computer field$140.00
224. GB/T 2888-2008Methods of noise measurement for fans blowers compressors and roots blowers$70.00
225. GB/T 2889.1-2020Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties$665.00
226. GB/T 2889.2-2020Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear$245.00
227. GB/T 2889.3-2020Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication$365.00
228. GB/T 2889.5-2021Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols$335.00
229. GB/T 2889.6-2020Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms$90.00
230. GB/T 2889.7-2026Plain bearings - Terms, definitions, classification and symbols - Part 7: Hydrostatic and aerostatic bearings$365.00
231. GB/T 2893.1-2013Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings$80.00
232. GB/T 2893.2-2020Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels$305.00
233. GB/T 2893.3-2010Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols used in safety signs$100.00
234. GB/T 2893.4-2013Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials$180.00
235. GB/T 2893.5-2020Graphical symbols—Safety colours and safety signs—Part 5: Principles and requirements for the use of safety signs$245.00
236. GB/T 2899-2017Barium sulphate precipitated for industrial use$130.00
237. GB/T 2900.1-2008Electrotechnical terminology - Fundamental terms$360.00
238. GB/T 2900.100-2017Electrotechnical terminology -- Superconductivity$740.00
239. GB/T 2900.101-2017Electrotechnical terminology -- Risk assessment$130.00
240. GB/T 2900.102-2020Electrotechnical terminology--Active assisted living$245.00
241. GB/T 2900.103-2020Electrotechnical terminology - Generation, transmission and distribution of electrical energy - Dependability and quality of service of electric power systems$425.00
242. GB/T 2900.104-2021Electrotechnical terminology - Micro-electromechanical devices$425.00
243. GB/T 2900.105-2022Electrotechnical terminology - Nano-enabled electrotechnical products and systems$245.00
244. GB/T 2900.12-2008Electrotechnical terminology - surge arresters,low-voltage surge protective devices and components$490.00
245. GB/T 2900.16-2025Electrotechnical terminology - Power capacitors$545.00
246. GB/T 2900.17-2024Electrotechnical terminology - Measuring relays and protection equipment$470.00
247. GB/T 2900.18-2008Electrotechnical terminology - Low voltage apparatus$410.00
248. GB/T 2900.22-2005Electrotechnical terminology Electric welding machine$230.00
249. GB/T 2900.26-2008Electrotechnical terminology - Electrical machine for automatic control system$840.00
250. GB/T 2900.27-2008Electrotechnical terminology - Small-power motor$270.00
251. GB/T 2900.28-2007Electrotechnical terminology - Electric tool$590.00
252. GB/T 2900.29-2008Electrotechnical terminology - Household and similar electrical appliance$1,040.00
253. GB/T 2900.32-1994Electrotechnical terminology--Power semiconductor device$380.00
254. GB/T 2900.35-2023Electrotechnical terminology - Explosive atmospheres$1,115.00
255. GB/T 2900.39-2009Electrotechnical terminology - Special equipment for electrical machine and transformer$290.00
256. GB/T 2900.4-2008Electrotechnical terminology - Special alloys for electrical equipment$740.00
257. GB/T 2900.40-1985Electrotechnical terminology--Machineryand equipment for electric wires and cables$180.00
258. GB/T 2900.46-1983Electrotechnical terminology--Steam turbine and auxiliary equipments$510.00
259. GB/T 2900.48-2008Electrotechnical terminology of boilers$1,110.00
260. GB/T 2900.50-2008Electrotechnical terminology -- Generation, transmission and distribution of electricity -- General$80.00
261. GB/T 2900.65-2023Electrotechnical terminology - Lighting$3,695.00
262. GB/T 2900.73-2025Electrotechnical terminology - Part 73: Earthing and protection against electric shock$200.00
263. GB/T 2900.88-2011Electrotechnical terminology -- Ultrasonic$120.00
264. GB/T 2900.9-1994Electrotechnical terminology--Spark plug$174.00
265. GB/T 2903-2015Copper/Copper-Nickel(Constantan) thermocouple wires$210.00
266. GB/T 2904-2010Nickel-Chromium/Gold-Iron,Copper/Gold-Iron low temperature thermocouple wires$170.00
267. GB/T 2909-2025Cotton grey canvas$125.00
268. GB/T 2910.1-2009Textiles -- Quantitative chemical analysis -- Part 1: General principles of testing$60.00
269. GB/T 2910.10-2009Textiles -- Quantitative chemical analysis -- Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)$45.00
270. GB/T 2910.101-2009Textiles - Quantitative chemical analysis - Part 101: Mixtures of soybean protein composite fibre and certain other fibers$90.00
271. GB/T 2910.11-2024Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulose fibres with certain other fibres(method using sulfuric acid)$240.00
272. GB/T 2910.12-2023Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres(method using dimethylformamide)$155.00
273. GB/T 2910.13-2009Textiles -- Quantitative chemical analysis -- Part 14: Mixtures of certain chlorofibre and certain other fibers (method using carbon disulfide/acetone)$80.00
274. GB/T 2910.14-2009Textiles -- Quantitative chemical analysis -- Part 14: Mixtures of acetate and certain chlorofibre (method using acetic acid)$50.00
275. GB/T 2910.15-2009Textiles -- Quantitative chemical analysis -- Part 15: Mixtures of jute and certain animal fibers (method by determining nitrogen content)$105.00
276. GB/T 2910.16-2024Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene)$155.00
277. GB/T 2910.17-2009Textiles -- Quantitative chemical analysis -- Part 17: Mixtures of chlorofibre (homopolymers of vinyl chloride) and certain other fibers (method using sulfuric acid)$55.00
278. GB/T 2910.18-2009Textiles -- Quantitative chemical analysis -- Part 18: Mixtures of silk and wool or hair (method using sulfuric acid)$45.00
279. GB/T 2910.19-2009Textiles -- Quantitative chemical analysis -- Part 19: Mixtures of cellulose fibres and asbestos (method by heating)$85.00
280. GB/T 2910.2-2009Textiles -- Quantitative chemical analysis -- Part 2: Ternary fibre mixture$60.00
281. GB/T 2910.20-2009Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and some other fibers (method of using dimethylacetamide)$45.00
282. GB/T 2910.21-2009Textiles -- Quantitative chemical analysis -- Part 21: Mixtures of chlorofibre, certain modacrylics, certain elastane, acetates, triacetates and certain other fibers (method of using dimethylacetamide)$45.00
283. GB/T 2910.22-2009Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax of ramie fibres (method using formic acid and zinc chloride)$45.00
284. GB/T 2910.23-2009Textiles - Quantitative chemical analysis - Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone)$30.00
285. GB/T 2910.24-2009Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and some other fibers (method using phenol and tetrachloroethane)$70.00
286. GB/T 2910.25-2017Textiles -- Quantitative chemical analysis -- Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform)$90.00
287. GB/T 2910.26-2017Textiles -- Qualitative chemical analysis -- Part 26: Mixtures of melamine and cotton or aramide fibers (method using hot formic acid)$210.00
288. GB/T 2910.3-2009Textiles -- Quantitative chemical analysis -- Part 3: Mixtures of acetate and certain other fibers (method using acetone)$45.00
289. GB/T 2910.4-2022Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres(method using hypochlorite)$110.00
290. GB/T 2910.5-2009Textiles -- Quantitative chemical analysis -- Part 5: Mixtures of viscose, cupro or modal and cotton fibers (method using sodium zincate)$45.00
291. GB/T 2910.7-2025Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide with certain other fibers (method using formic acid)$150.00
292. GB/T 2910.8-2009Textiles -- Quantitative chemical analysis -- Part 8: Mixtures of acetate and triacetate fibers (method using acetone)$45.00
293. GB/T 2910.9-2024Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol)$120.00
294. GB/T 2912.1-2009Textiles -- Determination of formaldehyde -- Part 1: Free and hydrolyzed formaldehyde (water extraction method)$60.00
295. GB/T 2912.2-2009Textiles -- Determination of formaldehyde -- Part 2: Released formaldehyde (vapour absorption method)$60.00
296. GB/T 2912.3-2009Textiles - Determination of formaldehyde - Part 3: High performance liquid chromatography method$30.00
297. GB/T 2913-2026Plastics - Test for whiteness$200.00
298. GB/T 2915-2013Determination of conductivity of water extract of polyvinyl chloride resins$70.00
299. GB/T 2917.1-2002Determination of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Congo red method$90.00
300. GB/T 2918-2018Plastics -- Standard atmospheres for conditioning and testing$154.00
301. GB/T 2930.1-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Sampling$420.00
302. GB/T 2930.10-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Testing coated seeds$215.00
303. GB/T 2930.11-2026Code of practice for seed testing of forage, turfgrass and other herbaceous plants - Part 11: Testing report$260.00
304. GB/T 2930.2-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- The purity analysis$360.00
305. GB/T 2930.3-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Determination of other seeds by number$120.00
306. GB/T 2930.4-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- The germination test$540.00
307. GB/T 2930.5-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Biochemical test for viability$300.00
308. GB/T 2930.6-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Seed health testing$190.00
309. GB/T 2930.7-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Species and variety testing$360.00
310. GB/T 2930.8-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Determination of moisture content$190.00
311. GB/T 2930.9-2017Rules of seed testing for forage, turfgrass and other herbaceous plant -- Weight determination$90.00
312. GB/T 2933-2025Vocabulary, designation and marking of wheels and rims for pneumatic tyres$355.00
313. GB/T 2934-2007General-purpose flat pallets for through transit of goods -- Principal dimensions and tolerances$85.00
314. GB/T 2938-2008Low heat micro-expansion cement$179.00
315. GB/T 2940-2025Springs for fuel pump, governor and injector of diesel engines — Technical specification$425.00
316. GB/T 2941-2025Rubber - General procedures for preparing and conditioning test pieces for physical test methods$295.00
317. GB/T 2942-2009Rubber, vulcanized -- Determination of static adhesion to textile cord -- H-pull test$215.00
318. GB/T 2943-2008Terms of Adhesive$345.00
319. GB/T 2943-2025Terms of adhesives$920.00
320. GB/T 2945-2017Ammonium nitrate$240.00
321. GB/T 2946-2018Ammonium chloride$300.00
322. GB/T 2947-2002Determination of free water in urea and ammonium nitrate by karl fischer method$90.00
323. GB/T 2951.21-2008Common test methods for insulating and sheathing materials of electric and optical cables -- Part 21: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests$90.00
324. GB/T 2952.1-2008Protective coverings for electric cables - Part 1: General$200.00
325. GB/T 2952.2-2008Protective coverings for electric cables - Part 2: Protective coverings for cables with metallic sheath$200.00
326. GB/T 2952.3-2008Protective coverings for electric cables - Part 3: General protective coverings for cables with non-metallic sheath$200.00
327. GB/T 2961-2014Aniline$150.00
328. GB/T 2965-2023Titanium and titanium alloy bars$230.00
329. GB/T 2967-2017Cast tungsten carbide powder$150.00
330. GB/T 2968-2020Samarium metal$70.00
331. GB/T 2969-2020Samarium oxide$90.00
332. GB/T 2970-2016Method for ultrasonic testing of thicker steel plates$438.00
333. GB/T 2970-2026Method for ultrasonic testing of thick steel plates$305.00
334. GB/T 2972-2016Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip$65.00
335. GB/T 2975-2018Steel and steel products - Location and preparation of samples and test pieces for mechanical testing$130.00
336. GB/T 2976-2020Metallic materials. Wire. Wrapping test$95.00
337. GB/T 2977-2024Size designation, dimensions, inflation pressure and load capacity for truck tyres$590.00
338. GB/T 2978-2024Passenger car tyres - Size designation, dimensions, inflation pressures and load capacities$725.00
339. GB/T 2979-2026Size designation, dimensions, inflation pressure and load capacity for agricultural tyres$875.00
340. GB/T 2980-2018Size designation, dimensions, inflation pressure and load capacity for earth-mover tyres$650.00
341. GB/T 2981-2014Technical specification of pneumatic tyres for industrial vehicles$70.00
342. GB/T 2982-2024Size designation, dimensions, inflation pressure and load capacity of pneumatic tyres for industrial vehicles$355.00
343. GB/T 2983-2015Series of motorcycle tyres$655.00
344. GB/T 2985-2008Biological microscope$120.00
345. GB/T 2988-2023High alumina bricks$160.00
346. GB/T 2992.2-2014Dimensions of refractory bricks - Part 2: Terminology for the shapes of refractory bricks and for brickwork$420.00
347. GB/T 2994-2021High alumina refractory mortars$95.00
348. GB/T 2997-2015Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products$80.00
349. GB/T 2999-2025Refractory materials - Determination of bulk density of granular materials$325.00
350. GB/T 3001-2017Refractory products -- Determination of modulus of rupture at ambient temperature$110.00
351. GB/T 3002-2017Refractory products -- Determination of modulus of rupture at elevated temperatures$120.00
352. GB/T 3003-2017Refractory fibres and their products$240.00
353. GB/T 3007-2006Refractories -- Determination of moisture content$65.00
354. GB/T 3027-2012Marine incandescent illumination lights$260.00
355. GB/T 3028-2012Marine electric signal lights$320.00
356. GB/T 3029-2025Technical specification for ships' ventilation accessories$50.00
357. GB/T 3032-2014Marks for marine piping valves and fittings$170.00
358. GB/T 3036-2017Marine centric-pivoted butterfly valves$620.00
359. GB/T 3037-2017Marine duo-eccentric-pivoted butterfly valves$660.00
360. GB/T 3039-2026Fibre cement pipes and their joints$305.00
361. GB/T 3043-2017Conventional abrasive -- Chemical analysis of brown fused aluminium oxide$480.00
362. GB/T 3044-2020Chemical analysis methods for white fused alumina and pink fused alumina$425.00
363. GB/T 3045-2024Conventional abrasive - Chemical analysis of silicon carbide$620.00
364. GB/T 3047.1-1995Series of basic dimensions of panels，rack and cabinets for vertical increment of 20mm$194.00
365. GB/T 3047.3-2003Series of basic dimensions of subracks and plug-in units for vertical increment of 20mm$50.00
366. GB/T 3047.5-2003Series of basic dimensions of cabiners for vertical increment of 20mm$85.00
367. GB/T 3047.6-2007Series of basic dimensions of cases for electronic equipment$90.00
368. GB/T 3047.8-1996Series of basic dimension of narrow cabinets for vertical increment of 44.45mm$210.00
369. GB/T 3048.1-2007Test methods for electrical properties of electric cables and wires - Part 1: General$110.00
370. GB/T 3048.10-2007Test methods for electrical properties of electric cables and wires - Part 10: Spark test of extruded protective sheaths$110.00
371. GB/T 3048.11-2025Test methods for electrical properties of electric cables and wires — Part 11: Test for dielectric dissipation factor$140.00
372. GB/T 3048.13-2025Test methods for electrical properties of electric cables and wires — Part 13: Impulse voltage test$260.00
373. GB/T 3048.14-2007Test methods for electrical properties of electric cables and wires -- Part 14: DC voltage test$160.00
374. GB/T 3048.16-2007Test methods for electrical properties of electric cables and wires - Part 16: Surface resistance test$110.00
375. GB/T 3048.2-2007Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials$275.00
376. GB/T 3048.3-2007Test methods for electrical properties of electric cables and wires - Part 3: Test of volume resistivity of semi-conducting rubbers and plastics$110.00
377. GB/T 3048.4-2025Test methods for electrical properties of electric cables and wires — Part 4: Test of DC resistance of conductors$200.00
378. GB/T 3048.5-2007Test methods for electrical properties of electric cables and wires - Part 5: Test of insulation resistance$70.00
379. GB/T 3048.7-2007Test methods for electrical properties of electric cables and wires - Part 7: Tracking resistance test$110.00
380. GB/T 3048.8-2025Test methods for electrical properties of electric cables and wires - Part 8: AC voltage test$260.00
381. GB/T 3048.9-2007Test methods for electrical properties of electric cables and wires - Part 9: Spark test of insulated cores$120.00
382. GB/T 3049-2006Chemical products for industrial use - General method for determination of iron content. 1, 10-Phenanthroline spectrophotometric method$80.00
383. GB/T 3050-2000Inorganic chemical products for industrial use. General method for determination of chloride content. Potentiometric method$75.00
384. GB/T 3051-2025General methods for the determination of chloride content in inorganic chemical products — Mercurimetric method and ion chromatography method$215.00
385. GB/T 3058-2019Determination of arsenic in coal$150.00
386. GB/T 3069.2-2005Method for the determination of The crystallization temperature of naphthalene$90.00
387. GB/T 3074.1-2021The test method for flexural strength of carbon materials$95.00
388. GB/T 3074.2-2024The test method for elastic modulus of carbon materials$190.00
389. GB/T 3074.3-2026Method for the determination of the oxidation resistance of carbon materials$200.00
390. GB/T 3074.4-2016Method for the determination of the coefficient of thermal expansion of graphite electrodes$90.00
391. GB/T 3075-2021Metallic materials - Fatigue testing - Axial force-controlled method$390.00
392. GB/T 3077-2015Alloy Structure Steels$70.00
393. GB/T 3078-2019Quality structural steel cold drawn bars$115.00
394. GB/T 3082-2020Galvanized or zinc-aluminum alloy-coated low-carbon steel wire for armoured cables$155.00
395. GB/T 3086-2019High carbon chromium stainless bearing steels$130.00
396. GB/T 3087-2022Seamless steel tubes and pipes for low and medium pressure boilers$245.00
397. GB/T 3089-2020Seamless ultra-thin wall stainless steel tubes$125.00
398. GB/T 3090-2020Seamless small diameter stainless steel tubes$135.00
399. GB/T 3091-2025Welded steel pipes for low pressure fluid delivery$320.00
400. GB/T 3093-2021High-pressure seamless steel tubes for diesel engine$200.00
401. GB/T 3094-2012Cold drawn shaped steel tubes$70.00
402. GB/T 3094-2026Cold drawn shaped steel tubes$680.00
403. GB/T 3098.1-2010Mechanical properties of fasteners - Bolts, screws and studs$120.00
404. GB/T 3098.15-2023Mechanical properties of fasteners - Stainless steel nuts$455.00
405. GB/T 3098.16-2014Mechanical properties of fasteners -- Stainless steel set screws$195.00
406. GB/T 3098.19-2004Mechanical properties of fasteners--Blind rivets with break pull mandrel$30.00
407. GB/T 3098.2-2015Mechanical properties of fasteners -- Nuts$120.00
408. GB/T 3098.20-2004Mechanical properties of fasteners--Wing nuts with specified proof torque$80.00
409. GB/T 3098.21-2014Mechanical properties of fasteners -- Stainless steel tapping screws$95.00
410. GB/T 3098.22-2009Mechanical properties of fasteners - Bolts, screws and studs made of fine grain non-heat-treated steel$425.00
411. GB/T 3098.23-2020Mechanical properties of fasteners - M42~M72 bolts, screws and studs$420.00
412. GB/T 3098.24-2020Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications$665.00
413. GB/T 3098.25-2020Mechanical properties of fasteners—Guidance for the selection of stainless steels and nickel alloys for fasteners$365.00
414. GB/T 3098.26-2021Mechanical properties of fasteners - Flat washers$230.00
415. GB/T 3098.3-2016Mechanical properties of fasteners -- Set screws$100.00
416. GB/T 3098.5-2025Mechanical properties of fasteners - Part 5: Tapping screws$295.00
417. GB/T 3098.6-2023Mechanical properties of fasteners - Stainless steel bolts, screws and studs$635.00
418. GB/T 3098.7-2000Mechanical properties of fasteners. Thread rolling screws$45.00
419. GB/T 3098.8-2010Mechanical properties of fasteners -- Parts for bolted connections for use at temperatures from -200 Celsius~+700 Celsius$130.00
420. GB/T 3098.9-2020Mechanical properties of fasteners - Prevailing torque type steel nuts$370.00
421. GB/T 3099.1-2008Terminology of fasteners - Thread fasteners,pin and washer$1,480.00
422. GB/T 3099.3-2017Terminology of fasteners -- Coatings$660.00
423. GB/T 3099.4-2021Terminology of fasteners - Control, inspection, delivery, acceptance and quality$575.00
424. GB/T 3102.6-1993Quantities and units of light and related electromagnetic radiations$350.00
425. GB/T 3103.3-2020Tolerances for fasteners - Plain washers$130.00
426. GB/T 3103.4-2014Tolerances for fasteners—Bolt/nut assemblies for service temperatures from －200°C～＋700°C$200.00
427. GB/T 3106-2016Fasteners -- Bolts, screws and studs -- Nominal lengths and thread lengths$65.00
428. GB/T 3108-2026Impressed current cathodic protection systems for ship hulls$260.00
429. GB/T 3131-2020Tin-lead solder$245.00
430. GB/T 3137-2020Testing method for electrical property of tantalum powder$215.00
431. GB/T 3139-2005Fiber-reinforced plastics composites-Determination of thermal conductivity$100.00
432. GB/T 3139-2026Test methods for the thermal conductivity of fibre reinforced plastics$245.00
433. GB/T 3140-2005Fiber-reinforced plastics composites-Determination of mean specific heat capacity$110.00
434. GB/T 3142-2019Standard test method for determination of load-carrying capacity of lubricants—Four-ball method$240.00
435. GB/T 3145-2023Determination of benzene crystallizing point$170.00
436. GB/T 3146-1982Industrial aromatic hydrocarbons and related materials -- Determination of distillation range -- Part 1: Distillation method$344.00
437. GB/T 3146.1-2010Industrial aromatic hydrocarbons and related materials -- Determination of distillation range -- Part 1: Distillation method$215.00
438. GB/T 3148-2008Bleached reed pulp$90.00
439. GB/T 3157-2023Chinese Holstein$170.00
440. GB/T 3159-2026Hydraulic universal testing machines$245.00
441. GB/T 3161-2015Optical theodolite$540.00
442. GB/T 3163-2024Vacuum technology - Vocabulary$1,295.00
443. GB/T 3167-2015Metal-cutting machine tools—Graphical symbols for operation indications$1,260.00
444. GB/T 3177-2009Geometrical product specifications (GPS) - Inspection of plain workpiece sizes$230.00
445. GB/T 3181-2008Colour standard for paint film$130.00
446. GB/T 3182-1995Classification，nomenclature and type for pigments$114.00
447. GB/T 3183-2017Masonry cement$120.00
448. GB/T 3183-2025Masonry cement$185.00
449. GB/T 3185-2016Zinc oxide(Indiect method)$170.00
450. GB/T 3186-2006Paints, varnishes and raw materials for paints and varnishes -- Sampling$60.00
451. GB/T 3190-2020Chemical composition of wrought aluminium and aluminium alloys$190.00
452. GB/T 3191-2019Extrusion rods and bars of aluminium and aluminium alloys$150.00
453. GB/T 3195-2023Aluminium and aluminium alloys drawn (rolled) round wire$295.00
454. GB/T 3198-2020Aluminium and aluminium alloy foils$180.00
455. GB/T 3199-2007Wrought aluminium and aluminium alloy products - Packing,marking,transporting and storing$110.00
456. GB/T 3199-2026Packing, marking, transport and storage of wrought aluminium and aluminium alloy products$515.00
457. GB/T 3203-2016Carburizing steels for bearings$100.00
458. GB/T 3207-2025Bright steel$290.00
459. GB/T 3208-2009Standard test method for the total sulfur content in benzene -- Type products by oxidative microcoulometry$155.00
460. GB/T 3209-2009Method for determination the amount of distillation residual of benzene－type product$90.00
461. GB/T 3211-2023Metal chrome$150.00
462. GB/T 3214-2007Methods for measurement of capacity of pump$590.00
463. GB/T 3216-2016Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1, 2 and 3 [including 2018XG1]$720.00
464. GB/T 3217-2013Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties$100.00
465. GB/T 3220-2011Freight container spreaders$140.00
466. GB/T 3221-2020Code for mooring and sea trials of internal combustion engine-driven inland ships$1,100.00
467. GB/T 3222.1-2022Acoustics - Description, measurement and assessment of environmental noise - Part 1: Basic quantities and assessment procedures$590.00
468. GB/T 3222.2-2022Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of sound pressure levels$770.00
469. GB/T 3227-2018Assembly tools for screws and nuts -- Driving squares for power socket tools$150.00
470. GB/T 3228-2022Assembly tools for screws and nuts - Dimensions of machine-operated impact square drive sockets$215.00
471. GB/T 3229-2018Assembly tools for screws and nuts -- Dimensions and torque testing of drive ends for hand and machine-operated screwdriver bits and connecting parts$210.00
472. GB/T 3235-2008Basic types sizes parameters and characteristies curve of fans$274.00
473. GB/T 3242-2026Technical code of practice for the production of cotton basic seed$305.00
474. GB/T 3246.1-2024Inspection method for structure of wrought aluminium and aluminium alloy products—Part 1: Inspection method for microstructure$1,040.00
475. GB/T 3246.2-2026Inspection methods for the structure of wrought aluminium and aluminium alloy products - Part 2: Inspection method for macrostructure$740.00
476. GB/T 3249-2022Test method for Fisher number of metal powders and related compounds$170.00
477. GB/T 3250-2017Shearing and riveting test method of wires and rods for the aluminum and aluminum-alloy rivets$240.00
478. GB/T 3251-2023Compression test method for aluminium and aluminium alloy products$275.00
479. GB/T 3253.1-2008Methods for chemical analysis of antimony and antimony trioxide - Determination of arsenic content - Arsenic molybdenum blue spectrophotometric method$90.00
480. GB/T 3253.10-2009Methods for chemical analysis of antimony and antimony trioxide - Determination of mercury content - Atomic fluorescence spectrometric method$80.00
481. GB/T 3253.11-2009Methods for chemical analysis of antimony and antimony trioxide - Determination of bismuth content - Flame atomic absorption spectrometric method$90.00
482. GB/T 3253.2-2008Methods for chemical analysis of antimony and antimony trioxide - Determination of iron content - Orthophenanthroline spectrophotometric method$90.00
483. GB/T 3253.3-2008Methods for chemical analysis of antimony and antimony trioxide - Determination of lead content - Flame atomic absorption spectrometric method$90.00
484. GB/T 3253.4-2009Methods for chemical analysis of antimony and antimony trioxide - Determination of sulfur content in antimony - Burning and sodium hydroxide titration method$90.00
485. GB/T 3253.5-2008Methods for chemical analysis of antimony and antimony trioxide - Determination of copper content - Flame atomic absorption spectrometric method$90.00
486. GB/T 3253.6-2008Methods for chemical analysis of antimony and antimony trioxide - Determination of selenium content - Atomic fluorescence spectrometer method$80.00
487. GB/T 3253.7-2009Methods for chemical analysis of antimony and antimony trioxide - Determination of bismuth content - Atomic fluorescence spectrometric method$90.00
488. GB/T 3253.8-2009Methods for chemical analysis of antimony and antimony trioxide - Determination of antimony trioxide content - Iodine titration method$114.00
489. GB/T 3253.9-2009Methods for chemical analysis of antimony and antimony trioxide - Determination of cadmium content - Flame atomic absorption spectrometric method$90.00
490. GB/T 3259-1992Transliterating rules of Chinese phonetic--Alphabet on titles for books and periodicals in Chinese$60.00
491. GB/T 3260.1-2024Methods for chemical analysis of tin - Part 1: Determination of copper, lead, zinc, cadmium, silver, nickel and cobalt contents - Flame atomic absorption spectroscopy$260.00
492. GB/T 3260.11-2023Methods for chemical analysis of tin—Part 11: Determination of copper,iron,bismuth,lead,antimony,arsenic,aluminum,zinc,cadmium,silver,nickel and cobalt contents—Inductively coupled plasma atomic emission spectrometry$215.00
493. GB/T 3260.2-2013Methods for chemical analysis of tin - Part 2: Determination of iron content - 1,10-phenanthroline photometric method$90.00
494. GB/T 3260.3-2013Methods for chemical analysis of tin - Part 3: Determination of bismuth content KI photometric method and flame atomic absorption spectrometric method$150.00
495. GB/T 3260.5-2013Methods for chemical analysis of tin - Part 5: Determination of antimony content - The malachite green photometric method$90.00
496. GB/T 3260.6-2013Methods for chemical analysis of tin - Part 6: Determination of arsenic contents - Malachite green arsenic molybdenum heteropoly acid photometric method$130.00
497. GB/T 3260.7-2013Methods for chemical analysis of tin - Part 7: Determination of aluminium content - Electrothermal atomic absorption spectrometric method$90.00
498. GB/T 3260.9-2013Methods for chemical analysis of tin - Part 9: Determination of sulphur content - Infra-red absorption method after high frequency induction furnace$110.00
499. GB/T 3273-2026Hot rolled steel sheet and strip for automobile frames$200.00
500. GB/T 3274-2017Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels$50.00