Search GB/T
500 GB/T standards in English, from GB/T 6102.2-2009 to GB/T 6323.4-1994, in code order.
- GB/T 6102.2-2009Test method for moisture regain in raw cotton - Electrical moisture meter$135.00
- GB/T 6102.2-2012Test method for moisture regain in raw cotton - Electrical resistance meter$135.00
- GB/T 6103-1985Test method for fault in raw cotton$105.00
- GB/T 6103-2006Test method for cotton defects in raw cotton - Hand$105.00
- GB/T 6104-1985Powered industrial trucks--Terminology$435.00
- GB/T 6104-2005Industrial trucks - Vocabulary - Part 1: Types of industrial trucks$435.00
- GB/T 6104.1-2018Industrial trucks - Terminology and classification - Part 1: Types of industrial trucks$545.00
- GB/T 6104.1-2025Industrial trucks - Vocabulary - Part 1: Types of industrial trucks$545.00
- GB/T 6104.3-2026Industrial trucks - Vocabulary - Part 3: Accessories and components$470.00
- GB/T 6107-1985Interface between data terminal equipment and data circuit-terminating equipment employing serial binary data interchange$210.00
- GB/T 6107-2000Interface between data terminal equipment and data circuit termination equipment employing serial binary data interchange$375.00
- GB/T 6108.1-1985Conductors for winding wires--Part 1: General$165.00
- GB/T 6108.1-2003Basic dimensions of winding wires - Part 1: Diameters of conductors for round winding wires$169.00
- GB/T 6108.2-1985Conductors for winding wires--Part 2: Dimensions of round conductors$165.00
- GB/T 6108.2-2003Basic dimensions of winding wires - Part 2: Maximum overall diameters of enamelled round winding wires$169.00
- GB/T 6108.3-1985Conductors for winding wires--Part 3: Dimensions of rectangular conductors$165.00
- GB/T 6108.3-2003Basic dimensions of winding wires - Part 3: Dimensions of conductors of insulated rectangular copper winding wires$105.00
- GB/T 6109.1-1990Enamelled round winding wires--Part 1: General$545.00
- GB/T 6109.1-2008Enamelled round winding wire - Part 1: General requirements [including MODIFICATION 1]$545.00
- GB/T 6109.1-2025Enamelled round winding wire - Part 1: General requirements$545.00
- GB/T 6109.10-1990Enamelled round winding wires--Part 10: Polyester (imide) enamelled round copper wires overcoated with polyamide, class 180$75.00
- GB/T 6109.10-2008Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155$75.00
- GB/T 6109.11-1990Enamelled round winding wires--Part 11: Polyester (imide) enamelled round copper wires overcoated with polyamide-imide, class 200$255.00
- GB/T 6109.11-2008Enamelled round winding wire - Part 11: Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155$255.00
- GB/T 6109.11-2025Enamelled round winding wire - Part 11: Solderable polyurethane enamelled round copper wireovercoated with polyamide, class 155$255.00
- GB/T 6109.12-2008Enamelled round winding wire -- Part 12: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180$70.00
- GB/T 6109.13-2008Enamelled round winding wire -- Part 13: Solderable polyesterimide enamelled round copper wire, class 180$65.00
- GB/T 6109.14-2008Enamelled round winding wire -- Part 14: Polyamide-imide enamelled round copper wire, class 200$35.00
- GB/T 6109.15-2008Enamelled round winding wire -- Part 15: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer$115.00
- GB/T 6109.15-2026Enamelled round winding wire—Part 15:Solderable polyurethane enamelled round copper wire,class 130,with a bonding layer$255.00
- GB/T 6109.16-2008Enamelled round winding wire -- Part 16: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer$85.00
- GB/T 6109.17-2008Enamelled round winding wire - Part 17: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer$85.00
- GB/T 6109.17-2025Enamelled round winding wire - Part 17: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer$255.00
- GB/T 6109.18-2008Enamelled round winding wire -- Part 18: Polyesterimide enamelled round copper wire, class 180, with a bonding layer$85.00
- GB/T 6109.18-2026Enamelled round winding wires - Part 18: Polyesterimide enamelled bondable round copper wire, class 180$255.00
- GB/T 6109.19-2008Enamelled round winding wire -- Part 19: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer$85.00
- GB/T 6109.19-2026Enamelled round winding wire—Part 19:Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire,class 200,with a bonding layer$255.00
- GB/T 6109.2-1990Enamelled round winding wires--Part 2: Modified polyester enamelled round copper wires, class 155$35.00
- GB/T 6109.2-2008Enamelled round winding wire -- Part 2: Polyester enamelled round copper wire, class 155$35.00
- GB/T 6109.20-2008Enamelled round winding wire -- Part 20: Polyester on polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200$55.00
- GB/T 6109.21-2008Enamelled round winding wire -- Part 21: Polyester-amide-imide enamelled round copper wire, class 200$70.00
- GB/T 6109.22-2008Enamelled round winding wire - Part 22: Aromatic polyimide enamelled round copper wire, class 240$55.00
- GB/T 6109.22-2025Enamelled round winding wire - Part 22: Aromatic polyimide enamelled round copper wire, class 240$255.00
- GB/T 6109.23-2008Enamelled round winding wire - Part 23: Solderable polyurethane enamelled round copper wire, class 180$55.00
- GB/T 6109.23-2025Enamelled round winding wire - Part 23: Solderable polyurethane enamelled round copper wire, class 180$255.00
- GB/T 6109.3-1985Enameled round winding wires--Part 3: Polyvinyl-formal enameled round copper wires with high mechanical properties$85.00
- GB/T 6109.3-2008Enamelled round winding wire -- Part 3: Polyvinyl acetal enamelled round copper wire, class 120$85.00
- GB/T 6109.3-2026Enamelled round winding wire—Part 3:Polyvinyl acetal enamelled round copper wire,class 120$255.00
- GB/T 6109.4-1988Enamelled round winding wires--Part 4: Self-fluxing polyurethane enamelled round copper wires$55.00
- GB/T 6109.4-2008Enamelled round winding wire -- Part 4: Solderable polyurethane enamelled round copper wire, class 130$55.00
- GB/T 6109.5-1988Enamelled round winding wires--Part 5: Polyesterimide enamelled round copper wires with a temperature index of 180$255.00
- GB/T 6109.5-2008Enamelled round winding wire - Part 5: Polyesterimide enamelled round copper wire, class 180$255.00
- GB/T 6109.5-2025Enamelled round winding wire—Part 5:Polyesterimide enamelled round copper wire;class 180$255.00
- GB/T 6109.6-1988Enamelled round winding wires--Part 6: Polyimide enamelled round copper wires with a temperature index of 220$70.00
- GB/T 6109.6-2008Enamelled round winding wire -- Part 6: Polymide enamelled round copper wire, class 220$70.00
- GB/T 6109.7-1990Enamelled round winding wires--Part 7: Polyester enamelled round copper wires, class 130$85.00
- GB/T 6109.7-2008Enamelled round winding wire -- Part 7: Polyester enamelled round copper wire, class 130L$85.00
- GB/T 6109.8-1989Enamelled round winding wires--Part 8: Heat or solvent bonding polyester enamelled round copper wires$79.00
- GB/T 6109.9-1989Enamelled round winding wires--Part 9: Heat or solvent bonding solderable polyurethane enamelled round copper wires$115.00
- GB/T 6109.9-2008Enamelled round winding wire -- Part 9: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130$115.00
- GB/T 6110-1985Hardmetal dies for drawing wires and bars--Types and dimensions$210.00
- GB/T 6110-2008Carbide dies for drawing - Types and dimensions$210.00
- GB/T 6110-2021Drawing dies—Carbide alloy drawing dies—Structural types and dimensions$210.00
- GB/T 6111-1985Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure$325.00
- GB/T 6111-2003Thermoplastics pipes for the conveyance of fluids -- Resistance to internal pressure -- Test method$85.00
- GB/T 6111-2018Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure$325.00
- GB/T 6113.1-1995Specifications for radio disturbance and immunity measuring apparatus$1,140.00
- GB/T 6113.101-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus$1,040.00
- GB/T 6113.101-2016Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus$1,040.00
- GB/T 6113.101-2021Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus$1,040.00
- GB/T 6113.102-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances$1,100.00
- GB/T 6113.102-2018Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-2: Radio disturbance and immunity measuring apparatus -- Coupling devices for conducted disturbance measurements$830.00
- GB/T 6113.102-2025Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements$1,100.00
- GB/T 6113.103-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbances power$390.00
- GB/T 6113.103-2021Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbances power$390.00
- GB/T 6113.103-2026Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power$255.00
- GB/T 6113.104-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances$1,655.00
- GB/T 6113.104-2016Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements$1,655.00
- GB/T 6113.104-2021Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements$1,040.00
- GB/T 6113.104-2025Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements$1,655.00
- GB/T 6113.105-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz$950.00
- GB/T 6113.105-2018Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-5: Radio disturbance and immunity measuring apparatus -- Antenna calibration sites and reference test sites for 5 MHz to 18 GHz$950.00
- GB/T 6113.105-2026Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5: Radio disturbance and immunity measuring apparatus—Antenna calibration sites and refernce test sites for 5 MHz to 18 GHz$255.00
- GB/T 6113.106-2018Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration$2,375.00
- GB/T 6113.106-2024Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration$2,375.00
- GB/T 6113.2-1998Methods of measurement of radio disturbance and immunity$560.00
- GB/T 6113.201-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements$1,355.00
- GB/T 6113.201-2017Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements$1,355.00
- GB/T 6113.201-2018Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-1: Methods of measurement of disturbances and immunity -- Conducted disturbance measurements$1,190.00
- GB/T 6113.201-2025Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements$1,355.00
- GB/T 6113.202-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power$510.00
- GB/T 6113.202-2018Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-2: Methods of measurement of disturbances and immunity -- Measurement of disturbance power$510.00
- GB/T 6113.203-2008Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods for measurement of disturbances and immunity - Radiated disturbance measurements$1,175.00
- GB/T 6113.203-2016Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements$1,175.00
- GB/T 6113.203-2020Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements$1,175.00
- GB/T 6113.203-2025Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements$1,175.00
- GB/T 6113.204-2008Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-4: Methods of measurement of disturbances and immunity -- Immunity measurements$205.00
- GB/T 6113.402-2006Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation Uncertainty$725.00
- GB/T 6113.402-2018Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty$725.00
- GB/T 6113.402-2022Specifications for radio disturbance and immunity measuring equipment and methods of measurement - Part 4-2: Uncertainty, statistics and limit value modeling Uncertainties of measuring equipment and facilities$725.00
- GB/T 6115-1985Series capacitors for power systems - Part 1: General$1,034.00
- GB/T 6115.1-1998Series capacitors for power systems. Part 1: General--Performance, testing and rating--Safety requirements--Guide for installation$695.00
- GB/T 6115.1-2008Series capacitors for power systems - Part 1: General$695.00
- GB/T 6115.1-2026Series capacitors for power systems - Part 1: General$695.00
- GB/T 6115.2-2002Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks$650.00
- GB/T 6115.2-2017Series capacitors for power systems -- Part 2: Protective equipment for series capacitor banks$650.00
- GB/T 6115.3-2002Series capacitors for power systems - Part 3: Internal fuse$105.00
- GB/T 6115.3-2026Series capacitors for power systems - Part 3: Internal fuses$255.00
- GB/T 6115.4-2014Series capacitors for power systems -- Part 4: Thyristor-controlled series capacitors$590.00
- GB/T 6117.1-1996End mills--Part 1: Milling cutters with parallel shanks$85.00
- GB/T 6117.1-2010End mills -- Part 1: Milling cutters with parallel shanks$85.00
- GB/T 6117.2-1996End mills--Part 2: Milling cutters with Morse taper shanks$75.00
- GB/T 6117.2-2010End mills -- Part 2: Milling cutters with Morse taper shanks$75.00
- GB/T 6117.3-1996End mills--Part 3: Milling cutters with 7/24 taper shanks$75.00
- GB/T 6117.3-2010End mills -- Part 3: Milling cutters with 7: 24 taper shanks$75.00
- GB/T 6118-1996End mills--Technical specifications$75.00
- GB/T 6118-2010End mills - Technical specifications$75.00
- GB/T 6119-1985Side and face milling cutters technical specifications$105.00
- GB/T 6119-2012Side and face milling cutter$105.00
- GB/T 6119.1-1996Side and face milling cutter$165.00
- GB/T 6119.2-1996Side and face milling cutter--Technical specifications$55.00
- GB/T 6120-1996Metal slitting saws--Types and dimensions$255.00
- GB/T 6120-2012Metal slitting saw$255.00
- GB/T 6120-2025Metal slitting saw$255.00
- GB/T 6121-1996Metal slitting saws--Technical specifications$249.00
- GB/T 6122-1985Corner-rounding cutters$169.00
- GB/T 6122-2017Corner-rounding cutters$145.00
- GB/T 6122.1-2002Corner-rounding cutters - Part 1: The types and dimensions$55.00
- GB/T 6122.2-2002Corner-rounding cutters - Part 2: The technical specifications$55.00
- GB/T 6124-2007T-slot cutters -- Types and sizes$105.00
- GB/T 6124.1-1996T-slot cutters -- Types and sizes$165.00
- GB/T 6124.2-1996T-slot cutters. Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes$169.00
- GB/T 6124.7-2014Test method of organic chemical products. Part 7: Determination of molten color$105.00
- GB/T 6125-1996T-slot cutters--Technical specifications$105.00
- GB/T 6125-2007T-slot cutters - Technical specifications$105.00
- GB/T 6128.1-1996Angle milling cutter--Part 1: The types and dimensions for single angle cutter$105.00
- GB/T 6128.1-2007Angle milling cutter - Part 1: The single and double unequal-angle cutters$105.00
- GB/T 6128.2-1996Angle milling cutter--Part 2: The types and dimensions for double unequal-angle cutters$85.00
- GB/T 6128.2-2007Angle milling cutter -- Part 2: The double equal-angle cutters$85.00
- GB/T 6128.3-1996Angle milling cutter--Part 3: The types and dimensions for double equal-angle cutters$169.00
- GB/T 6129-1996Angle cutters--Technical specifications$109.00
- GB/T 6129-2007Technical specifications for angle cutters$109.00
- GB/T 6130-1985Segmental circular metal cutting saws$169.00
- GB/T 6130-2001Segmental circular metal cutting saws$109.00
- GB/T 6131.1-1996Parallel shanks for milling cutters--Part 1: Dimensional characteristics of plain parallel shanks$65.00
- GB/T 6131.1-2006Cylindrical shanks for milling cutters -- Part 1: Types and sizes of plain cylindrical shanks$65.00
- GB/T 6131.2-1996Parallel shanks for milling cutters--Part 2: Dimensional characteristics of flatted parallel shanks$90.00
- GB/T 6131.2-2006Cylindrical shanks for milling cutters -- Part 2: Types and sizes of flatted cylindrical shanks$90.00
- GB/T 6131.3-1996Parallel shanks for milling cutters. Part 3: Dimen-sional characteristics of parallel shanks with 2-degreeangular flats$65.00
- GB/T 6131.4-1996Parallel shanks for milling cutters--Part 4: Dimensional characteristics of screwed shanks$40.00
- GB/T 6131.4-2006Cylindrical shanks for milling cutters -- Part 4: Types and sizes of threaded cylindrical shanks$40.00
- GB/T 6132-1993Interchangeability dimensions for milling cutters and arbors$85.00
- GB/T 6132-2006Milling cutters Interchangeability dimensions for cutter arbors$150.00
- GB/T 6132-2021Interchangeability dimensions for milling cutter or milling cutter arbors$150.00
- GB/T 6133-1985Tool chucks for flatted parallel shank tools$79.00
- GB/T 6133.1-2006Tool chucks for flatted parallel shank tools -- Part 1: Dimensions of the driving system of tool shanks$55.00
- GB/T 6133.2-2006Tool chucks for flatted parallel shank tools -- Part 2: Connecting dimensions of chucks and designation$105.00
- GB/T 6135.1-1996Parallel shank twist drills--Part 1: The types and dimensions for small type twist drills with oversize parallel shank$75.00
- GB/T 6135.1-2008Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank$75.00
- GB/T 6135.2-1996Parallel shank twist drills--Part 2: The types and dimensions for parallel shank stub series twist drills$135.00
- GB/T 6135.2-2008Parallel shank twist drills -- Part 2: The types and dimensions for parallel shank stub series twist drills and parallel shank jobber series twist drills$135.00
- GB/T 6135.3-1996Parallel shank twist drills--Part 3: The types and dimensions for parallel shank jobber series twist drills$85.00
- GB/T 6135.3-2008Parallel shank twist drills -- Part 3: The types and dimensions for parallel shank long series twist drills$85.00
- GB/T 6135.4-1996Parallel shank twist drills--Part 4: The types and dimensions for parallel shank long series twist drills$85.00
- GB/T 6135.4-2008Parallel shank twist drills -- Part 4: The types and dimensions for extra-long parallel shank twist drills$85.00
- GB/T 6135.5-1996Parallel shank twist drills--Part 5: The types and dimensions for extra long parallel shank twist drills$169.00
- GB/T 6138-1985Subland twist drills with parallel shanks for holes prior to tapping screw threads$145.00
- GB/T 6138-2023Subland twist drills for holes prior to tapping screw threads$145.00
- GB/T 6138.1-1997Subland twist drills for holes prior to tapping screw threads. Part 1: The types and dimensions for subland twist drills with parallel shanks$85.00
- GB/T 6138.1-2007Subland twist drills for holes prior to tapping screw threads$85.00
- GB/T 6138.2-1997Subland twist drills for holes prior to tapping screw threads. Part 1: The types and dimensions for subland twist drills with Morse shanks$169.00
- GB/T 6138.2-2007Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of subland twist drills with Morse taper shanks$85.00
- GB/T 6139-1985Subland twist drills with taper shanks for holes prior to tapping screw threads$109.00
- GB/T 6139-1997Subland twist drills--Technical specifications$109.00
- GB/T 6139-2007Subland twist drills - Technical specifications$109.00
- GB/T 6140-1985Fountain pen$165.00
- GB/T 6140-1995Fountain pen$165.00
- GB/T 6144-1985Synthetic cutting fluids$135.00
- GB/T 6144-2010Synthetic cutting fluids$135.00
- GB/T 6145-1985Manganin and constantan precision resistance alloys$85.00
- GB/T 6145-1999Manganin and constantan alloy wires, sheet and rolled wires for precision electrical resistance$85.00
- GB/T 6145-2010Manganin and constantan alloy wires,sheet and rolled wires for precision electrical resistance$85.00
- GB/T 6146-1985Test method for resistivity of precision resistance alloys$105.00
- GB/T 6146-2010Test method for resistivity of precision resistance alloys$105.00
- GB/T 6147-1985Test method for thermoelectric power of precision resistance alloys$195.00
- GB/T 6147-2005Test method for thermoelectric power of precision resistance alloys$195.00
- GB/T 6147-2025Test method for thermoelectric power of precision resistance alloys$195.00
- GB/T 6148-1985Test method for temperature-resistance coefficient of precision resistance alloys$195.00
- GB/T 6148-2005Test method for temperature-resistance coefficient of precision resistance alloys$195.00
- GB/T 6148-2025Test method for temperature-resistance coefficient of precision resistance alloys$195.00
- GB/T 6149-1985New constantan resistance alloy$225.00
- GB/T 6149-2010New constantan resistance alloy$225.00
- GB/T 6150.1-1985Methods for chemical analysis of tungsten concentrates--The ammonium tungstate igniting gravimetric method for the determination of tungsten trioxide content$180.00
- GB/T 6150.1-2008Methods for chemical analysis of tungsten concentrates - Determination of tungsten trioxide content - The ammonium tungstate igniting gravimetric method$180.00
- GB/T 6150.1-2023Methods for chemical analysis of tungsten concentrates—Part 1: Determination of tungsten trioxide content—Ammonium tungstate igniting gravimetric method$180.00
- GB/T 6150.10-1985Methods for chemical analysis of tungsten concentrates--The thiocyanate photometric method for the determination of molybdenum content$210.00
- GB/T 6150.10-2008Methods for chemical analysis of tungsten concentrates - Determination of lead content - Flame atomic absorption spectrometric method$210.00
- GB/T 6150.10-2023Methods for chemical analysis of tungsten concentrates—Part 10: Determination of lead content—Hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry$210.00
- GB/T 6150.11-1985Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric method for the determination of copper content$240.00
- GB/T 6150.11-2008Methods for chemical analysis of tungsten concentrates - Determination of zinc content - Flame atomic absorption spectrometric method$85.00
- GB/T 6150.11-2026Methods for chemical analysis of tungsten concentrates - Part 11: Determination of impurity element contents - Inductively coupled plasma atomic emission spectrometry$240.00
- GB/T 6150.12-1985Methods for chemical analysis of tungsten concentrates--The hydrochloric acid-sodium chloride supporting electrolyte polarographic method for the determination of lead content$210.00
- GB/T 6150.12-2008Methods for chemical analysis of tungsten concentrates - Determination of silicon dioxide content - The silicon molybdenum blue spectrophotometry and the gravimetry$210.00
- GB/T 6150.12-2023Methods for chemical analysis of tungsten concentrates—Part 12: Determination of silicon dioxide content—Silicomolybdenum blue spectrophotometry and gravimetry$210.00
- GB/T 6150.13-1985Methods for chemical analysis of tungsten concentrates--The ammonium hydroxide-ammonium chloride supporting electrolyte polarographic method for the determination of zinc content$225.00
- GB/T 6150.13-2008Methods for chemical analysis of tungsten concentrates - Determination of arsenic content - Hydride reduction atomic absorption spectrometry and the silver diethyldithiocarbamate (DDTC-Ag) photometry$225.00
- GB/T 6150.13-2022Methods for chemical analysis of tungsten concentrates—Part 13: Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate (DDTC-Ag) spectrophotometry$225.00
- GB/T 6150.14-1985Methods for chemical analysis of tungsten concentrates--The molybdenum blue photometric method for the determination of silicon dioxide content$105.00
- GB/T 6150.14-2008Methods for chemical analysis of tungsten concentrates - Determination of manganese content - The ammonium ferrous sulfate volumetric method and flame atomic absorption spectrometric method$105.00
- GB/T 6150.15-1985Methods for chemical analysis of tungsten concentrates--The silver diethyldithiocarbamate photometric method for the determination of arsenic content$210.00
- GB/T 6150.15-2008Methods for chemical analysis of tungsten concentrates - Determination of bismuth content - Flame atomic absorption spectrometric method$210.00
- GB/T 6150.15-2023Methods for chemical analysis of tungsten concentrates—Part 15: Determination of bismuth content—Hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry$210.00
- GB/T 6150.16-1985Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric method for the determination of manganese content$225.00
- GB/T 6150.16-2009Methods for chemical analysis of tungsten concentrates - Determination of iron content - The sulfosalicylic acid spectrophotometry$85.00
- GB/T 6150.16-2026Methods for chemical analysis of tungsten concentrates - Part 16: Determination of iron, manganese, silicon, calcium and tungsten contents - X-ray fluorescence spectrometry$225.00
- GB/T 6150.17-1985Methods for chemical analysis of tungsten concentrates--The semi-xylenol orange photometric method for the determination of bismuth content$210.00
- GB/T 6150.17-2008Methods for chemical analysis of tungsten concentrates - Determination of antimony content - Hydride reduction atomic absorption spectrometry$210.00
- GB/T 6150.17-2022Methods for chemical analysis of tungsten concentrates—Part 17: Determination of antimony content—Atomic fluorescence spectrometry$210.00
- GB/T 6150.18-1985Methods for chemical analysis of tungsten concentrates--The sulphosalicylic acid photometric method for the determination of iron content$150.00
- GB/T 6150.18-2023Methods for chemical analysis of tungsten concentrates—Part 18: Determination of barium content—Inductively coupled plasma atomic emission spectrometry$150.00
- GB/T 6150.19-1985Methods for chemical analysis of tungsten concentrates--The 2- (5-bromo-pyridylazo)-5-diethylaminophenol photometric method for the determination of antimony content$255.00
- GB/T 6150.19-2025Methods for chemical analysis of tungsten concentrates - Part 19: Determination of fluoride content - Ion selective electrode method$255.00
- GB/T 6150.2-1985Methods for chemical analysis of tungsten concentrates--The potassium iodate volumetric method for the determination of tin content$240.00
- GB/T 6150.2-2008Methods for chemical analysis of tungsten concentrates - Determination of tin content - The potassium iodate volumetric and hydrogenate atomic absorption spectrometry$240.00
- GB/T 6150.2-2022Methods for chemical analysis of tungsten concentrates—Part 2: Determination of tin content—Potassium iodate titrimetry and inductively coupled plasma atomic emission spectrometry$240.00
- GB/T 6150.20-2025Methods for chemical analysis of tungsten concentrates — Part 20: Determination of mercury content — Solid sampling and direct mercury analysis method$255.00
- GB/T 6150.3-1985Methods for chemical analysis of tungsten concentrates--The salicylfluorone-tetradecyl pyridine chloride photometric method for the determination of tin content$245.00
- GB/T 6150.3-2009Methods for chemical analysis of tungsten concentrates - Determination of phosphorus content - The phosphorus molybdenum yellow spectrophotometry$245.00
- GB/T 6150.3-2023Methods for chemical analysis of tungsten concentrates—Part 3: Determination of phosphorus content—The phosphorus molybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry$245.00
- GB/T 6150.4-1985Methods for chemical analysis of tungsten concentrates--The molybdenum yellow photometric method for the determination of phosphorus content$210.00
- GB/T 6150.4-2008Methods for chemical analysis of tungsten concentrates - Determination of sulfur content - The high frequency-infrared absorption method$210.00
- GB/T 6150.4-2023Methods for chemical analysis of tungsten concentrates—Part 4: Determination of sulfur content—High frequency-infrared absorption method and combustion-iodometric method$210.00
- GB/T 6150.5-1985Methods for chemical analysis of tungsten concentrates--The barium sulfate gravimetric method for the determination of sulfur content$105.00
- GB/T 6150.5-2008Methods for chemical analysis of tungsten concentrates - Determination of calcium content - EDTA volumetric method and flame atomic absorption spectrometric method$105.00
- GB/T 6150.6-1985Methods for chemical analysis of tungsten concentrates--The EDTA volumetric method for the determination of calcium content$150.00
- GB/T 6150.6-2008Methods for chemical analysis of tungsten concentrates - Determination hygroscopic moisture content - Gravimetric method$150.00
- GB/T 6150.6-2023Methods for chemical analysis of tungsten concentrates—Part 6: Determination of moisture content—Gravimetric method$150.00
- GB/T 6150.7-1985Methods for chemical analysis of tungsten concentrates--The atomic absorption spectrophotometric method for the determination of calcium content$135.00
- GB/T 6150.7-2008Methods for chemical analysis of tungsten concentrates - Determination of tantalum content and niobium content - Inductively coupled plasma emission spectrometry and spectrophotometry$135.00
- GB/T 6150.8-1985Methods for chemical analysis of tungsten concentrates--The gravimetric method for the determination hygroscopic moisture content$150.00
- GB/T 6150.8-2009Methods for chemical analysis of tungsten concentrates - Determination of molybdenum content - The thiocyanate spectrophotometry$150.00
- GB/T 6150.8-2023Methods for chemical analysis of tungsten concentrates—Part 8: Determination of molybdenum content—Thiocyante spectrophotometry method$150.00
- GB/T 6150.9-1985Methods for chemical analysis of tungsten concentrates--The chlorosulphophenol S photometric method for the determination niobium content--The butylrhodamine B extraction photometric method for the determinati$85.00
- GB/T 6150.9-2009Methods for chemical analysis of tungsten concentrates - Determination of copper content - Flame atomic absorption spectrometry$85.00
- GB/T 6151-1985Textiles--Tests for colour fastness--General principles$85.00
- GB/T 6151-1997Textiles. Tests for colour fastness. General principle of testing$85.00
- GB/T 6151-2016Textiles -- Tests for colour fastness -- General principles of testing$85.00
- GB/T 6152-1985Textiles--Testing method for colour fastness to hot pressing (iron)$35.00
- GB/T 6152-1997Textiles. Tests for colour fastness. Colour fastness to hot pressing$35.00
- GB/T 6154-1985Carbon materials--Determination of the bulk density$79.00
- GB/T 6155-1985Carbon materials--Determination of the true density$165.00
- GB/T 6155-2008Carbon materials - Determination of the true density or porosity$85.00
- GB/T 6156-1985Carbon materials--Determination of the true porosity$79.00
- GB/T 6159.1-1985Micrographics--Vocabulary section 1: General terms$135.00
- GB/T 6159.1-2003Micrographics - Vocabulary - Part 1: General terms$135.00
- GB/T 6159.1-2014Micrographics -- Vocabulary -- Part 1: General terms$135.00
- GB/T 6159.10-2006Micrographics -- Vocabulary -- Part 10: Index$345.00
- GB/T 6159.2-1985Micrographics--Vocabulary section 4: Materials and packaging$165.00
- GB/T 6159.2-2011Micrographics -- Vocabulary -- Part 2: Image positions and methods of recording$165.00
- GB/T 6159.22-2000Micrographics - Vocabulary and methods of recording the second part of the image$85.00
- GB/T 6159.3-1994Micrographics--Vocabulary--Section 3: Film processing$115.00
- GB/T 6159.3-2003Micrographics - Vocabulary - Part 3: film processing$115.00
- GB/T 6159.3-2014Micrographics -- Vocabulary -- Part 3: Film processing$115.00
- GB/T 6159.4-1994Micrographics--Vocabulary Part 06: Equipment$135.00
- GB/T 6159.4-2003Micrographics - Vocabulary - Part 4: Materials and packaging$195.00
- GB/T 6159.4-2014Micrographics -- Vocabulary -- Part 4: Materials and packaging$195.00
- GB/T 6159.5-2000Micrographics - Vocabulary fifth part of the image quality, readability, and check$195.00
- GB/T 6159.5-2011Micrographics -- Vocabulary -- Part 5: Quality of images, legibility, inspection$195.00
- GB/T 6159.6-2003Micrographics -- Vocabulary -- Part 6: Equipment$225.00
- GB/T 6159.7-2000Micrographics - Vocabulary - Part VII Computer micrographics$135.00
- GB/T 6159.7-2011Micrographics -- Vocabulary -- Part 7: Computer micrographics$135.00
- GB/T 6159.8-2003Micrographics -- Vocabulary -- Part 8: Use$165.00
- GB/T 6160-1995Micrographics--Density of the first generation silver-gelatin microforms$85.00
- GB/T 6160-2003Micrographics -- First generation silver-gelatine microforms of source documents -- Density specifications and method of measurement$85.00
- GB/T 6161-1994Micrographics--Test chart No. 2--Description and use in microfilming$105.00
- GB/T 6161-2008Micrographics -- ISO resolution test chart No.2 -- Description and use$105.00
- GB/T 6163-1985Methods of measurement on radio receivers for FM broadcast transmissions$890.00
- GB/T 6163-2011Methods of measurement on radio receivers for FM broadcast transmissions$890.00
- GB/T 6163.9-2000Methods of measurement on radio receivers for various classes of emission. Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception$135.00
- GB/T 6165-1985Methods for testing the performance of high efficiency particulate air filter--Penetration and resistance$650.00
- GB/T 6165-2008Test method of the performance of high efficiency particulate air filter - Efficiency and resistance$650.00
- GB/T 6165-2021Test method of the performance of high efficiency particulate air filter—Efficiency and resistance$650.00
- GB/T 6166-1985Methods for testing the performance of high efficiency filter media--Penetration and resistance$415.00
- GB/T 6167-2007Methods for testing the performance of airborne particle counter$205.00
- GB/T 6167-2026Test methods for the performance of airborne particle counters$300.00
- GB/T 6167.1-1985Test methods for the performance of airborne particle counter$205.00
- GB/T 6167.2-1985Methods for testing the performance of dust particle counter--Particle concentration$55.00
- GB/T 6170-1986Hexagon nuts, style 1--Product grades A and B$35.00
- GB/T 6170-2000Hexagon nuts, style 1$35.00
- GB/T 6170-2015Hexagon nuts, style 1$35.00
- GB/T 6171-1986Hexagon nuts, style 1--Fine pitch thread--Product grades A and B$35.00
- GB/T 6171-2000Hexagon nuts, style J, with fine pitch thread$35.00
- GB/T 6171-2016Hexagon nuts, style 1 -- Fine pitch thread$35.00
- GB/T 6172.1-2000Hexagon thin nuts (chamfered)$75.00
- GB/T 6172.1-2016Hexagon thin nuts (chamfered)$75.00
- GB/T 6172.2-2000Prevailing torque type hexagon thin nuts (with non-metallic insert)$75.00
- GB/T 6172.2-2016Prevailing torque type hexagon thin nuts (with non-metallic insert)$75.00
- GB/T 6173-1986Hexagon thin nuts--Fine pitch thread--Product grades A and B$35.00
- GB/T 6173-2000Hexagon thin nuts (chamfered) with fine pitch thread$35.00
- GB/T 6173-2015Hexagon thin nuts -- Fine pitch thread$35.00
- GB/T 6174-1986Hexagon thin nuts--Product grade B--Unchamfered$75.00
- GB/T 6174-2000Hexagon thin nuts (unchamfered)$75.00
- GB/T 6174-2016Hexagon thin nuts -- Unchamfered$75.00
- GB/T 6175-1986Hexagon nuts, style 2--Product grades A and B$75.00
- GB/T 6175-2000Hexagon nuts, style 2$75.00
- GB/T 6175-2016Hexagon nuts, style 2$75.00
- GB/T 6176-1986Hexagon nuts, style 2--Fine pitch thread--Product grades A and B$50.00
- GB/T 6176-2000Hexagon nuts, style 2, with fine pitch thread$50.00
- GB/T 6176-2016Hexagon nuts, style2 -- Fine pitch thread$50.00
- GB/T 6177.1-2000Hexagon nuts with flange$75.00
- GB/T 6177.1-2016Hexagon nuts with flange, style 2$75.00
- GB/T 6177.2-2000Hexagon nuts with flange. Fine pitch thread$75.00
- GB/T 6177.2-2016Hexagon nuts with flange, style 2 -- Fine pitch thread$75.00
- GB/T 6178-1986Hexagon slotted and castle nuts, style 1. Product grades A and B$79.00
- GB/T 6179-1986Hexagon slotted nuts, style 1. Product grade C$79.00
- GB/T 6180-1986Hexagon slotted and castle nuts, style 2. Product grades A and B$79.00
- GB/T 6181-1986Hexagon thin slotted nuts. Product grades A and B$79.00
- GB/T 6182-1986Prevailing torque type hexagon nuts (with non-metallic insert), style 2$75.00
- GB/T 6182-2000Prevailing torque type hexagon nuts (with non-metallic insert), style 2$75.00
- GB/T 6182-2010Prevailing torque type hexagon nuts (with non-metallic insert), style 2$75.00
- GB/T 6182-2016Prevailing torque type hexagon nuts (with non-metallic insert), style 2$75.00
- GB/T 6183.1-2000Prevailing torque type hexagon nuts with flange (with non-metallic insert)$75.00
- GB/T 6183.1-2016Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2$75.00
- GB/T 6183.2-2000Prevailing torque type hexagon nuts with flange (with non-metallic insert) with fine pitch thread$75.00
- GB/T 6183.2-2016Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 -- Fine pitch thread$75.00
- GB/T 6184-1986Prevailing torque type all-metal hexagon nuts, style 1$45.00
- GB/T 6184-2000Prevailing torque type all-metal hexagon nuts, style 1$45.00
- GB/T 6185.1-2000Prevailing torque type all-metal hexagon nuts, style 2$75.00
- GB/T 6185.1-2016Prevailing torque type all-metal hexagon nuts, style 2$75.00
- GB/T 6185.2-2000Prevailing torque type all-metal hexagon nuts, style 2, with fine pitch thread$75.00
- GB/T 6185.2-2016Prevailing torque type all-metal hexagon nuts, style 2 -- Fine pitch thread$75.00
- GB/T 6186-1986Prevailing torque type all-metal hexagon nuts, style 2--Property class 9$85.00
- GB/T 6186-2000Prevailing torque type all-metal hexagon nuts,style 2-Property class 9$85.00
- GB/T 6187.1-2000Prevailing torque type all-metal hexagon nuts with flange$105.00
- GB/T 6187.1-2016Prevailing torque type all-metal hexagon nuts with flange, style 2$105.00
- GB/T 6187.2-2000Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread$75.00
- GB/T 6187.2-2016Prevailing torque type all-metal hexagon nuts with flange, style 2 -- Fine pitch thread$75.00
- GB/T 6188-1986Hexagon lobular for fasteners--Type T$125.00
- GB/T 6188-2000Hexalobular internal driving feature for bolts and screws$125.00
- GB/T 6188-2008Hexalobular internal driving feature for bolts and screws$125.00
- GB/T 6188-2017Hexalobular internal driving feature for bolts and screws$125.00
- GB/T 6189-1986Hexagon lobular for fasteners. Type E$125.00
- GB/T 6190-1986Hexagon lobular socket head cap screws--Property class 4. 8$79.00
- GB/T 6191-1986Hexagon lobular socket head cap screws--Property class 8. 8$79.00
- GB/T 6192-1986Jew-ear fungus$145.00
- GB/T 6192-2008Auricularia auricular$145.00
- GB/T 6192-2019Wood ear$145.00
- GB/T 6194-1986Determination of soluble sugar in vegetable and fruit$79.00
- GB/T 6195-1986Determination of vitamin C in vegetables and fruits (2, 6-dechloro-indophenol titration method)$115.00
- GB/T 6197-2000Veneer roller dryer$240.00
- GB/T 6197-2024Wood based panel machinery—Veneer dryer$240.00
- GB/T 6199-1986Parameters of the veneer wire net dryers$135.00
- GB/T 6199-2000Veneer net-belt dryer$135.00
- GB/T 6202-2000General specifications for wide belt sanders$235.00
- GB/T 6202-2019Wide belt sanding machine$235.00
- GB/T 6206-1986Blank detail specification for black and white picture tubes$145.00
- GB/T 6206-2015Blank detail specification for black and white picture tubes$145.00
- GB/T 6207-1986Blank detail specification for oscilloscope tubes and indicator tubes$285.00
- GB/T 6208-1995Filler metal for soft soldering and brazing--Designation$165.00
- GB/T 6217-1986Blank detail specification for ambient-rated bipolar transistors for low and high-frequency amplification$300.00
- GB/T 6217-1998Discrete semiconductor devices - Blank detail specification for low power bipolar transistors$195.00
- GB/T 6217-2026Discrete semiconductor devices - Blank detail specification for low power bipolar transistors$300.00
- GB/T 6218-1996Blank detail specification for bipolar transistors for switching applications$165.00
- GB/T 6219-1986Blank detail specification for single-gate field-effect transistors up to 5W and 1GHz$195.00
- GB/T 6219-1998Semiconductor devices Discrete devices. Part 8: Field-effect transistors. Section One. Blank detail specification for singe-gate field-effect transistors up to 5W and 1GHz$195.00
- GB/T 6223-1997Self-inhalation filter type particles respirator$169.00
- GB/T 6224.1-1986Test method for total inward leakage of filtering particle respirator$79.00
- GB/T 6224.2-1986Test method for filter efficiency of filtering particle respirator$79.00
- GB/T 6224.3-1986Test method for the dead space of filtering particle respirator$79.00
- GB/T 6224.4-1986Test method for airflow resistance of respiration of filtering particle respirator$79.00
- GB/T 6229-1995Methods of test for walking tractor$435.00
- GB/T 6229-2007Test methods for walking tractors$435.00
- GB/T 6232-1986Tractors and machinery for agriculture and forestry wheel fixing on hub--Dimensional characteristics$85.00
- GB/T 6232-1998Tractors and machinery for agriculture and forestry. Wheel-to-hub fixing dimensions$85.00
- GB/T 6232-2021Tractors and machinery for agriculture and forestry - Wheel-to-hub fixing dimensions$85.00
- GB/T 6235-1997Agricultural tractors--Operatorseating accommodation--Dimensions$95.00
- GB/T 6235-2004Agricultural tractors -- Operator seating accommodation -- Dimensions$95.00
- GB/T 6236-1986Agricultural tractors--Operatorseat index point$115.00
- GB/T 6236-2008Tractors and machinery for agricultural and forestry -- Seat index point$115.00
- GB/T 6238-1986Agricultural tractors--Access, exit and the operatorworkplace--Dimensions$195.00
- GB/T 6238-2004Agricultural tractors - Operator workplace, access and exit - Dimensions$195.00
- GB/T 6238-2025Agricultural tractors - Operator workplace, access and exit - Dimensions$195.00
- GB/T 6242-1986Method of test for potato planters$105.00
- GB/T 6242-2006Equipment for planting -- Potato planters -- Method of testing$105.00
- GB/T 6243-1986Method of test for rice transplanter$175.00
- GB/T 6243-2003Test method of rice transplanter$175.00
- GB/T 6243-2017Rice transplanter—Test method$175.00
- GB/T 6244-1986The general chassis of fire fighting vehicles series, types, basic parameters and technical requirements$79.00
- GB/T 6247-1986Terminology of rock drilling machines and pneumatric tools$405.00
- GB/T 6247-2004Rock drilling machines and portable power tools -- Terminology -- Part 1: Rock drilling machines, pneumatic tools and machines$405.00
- GB/T 6247.1-2013Rock drilling machines and portable power tools -- Terminology -- Part 1: Rock drilling machines, pneumatic tools and machines$830.00
- GB/T 6247.2-2013Rock drilling machines and portable power tools -- Terminology -- Part 2: Hydraulic tools$375.00
- GB/T 6247.3-2013Rock drilling machines and portable power tools—Terminology—Part 3: Accessories,parts and mechanism$315.00
- GB/T 6247.4-2013Rock drilling machines and portable power tools -- Terminology -- Part 4: Performance test$435.00
- GB/T 6250-1986Terms for liquid crystal displays$79.00
- GB/T 6251-1986Dimensioning of outline and rule of terminals alignment for liquid crystal displays$285.00
- GB/T 6252-1986Type specification for variable tuning capacitors type A in electronic equipments$304.00
- GB/T 6253-1986Type specification for variable trimmer capacitors type B in electronic equipments$264.00
- GB/T 6254-1986Type specification for variable preset capacitors. Type C in electronic equipments$234.00
- GB/T 6255-1986Generic specification for space-charge controlled tubes$209.00
- GB/T 6255-2001General specification for space-charge controlled tubes$125.00
- GB/T 6256-1986Blank detail specification forindustrial heating triodes$245.00
- GB/T 6256-2026Blank detail specification for industrial heating triodes$195.00
- GB/T 6257-1986Blank detail specification for small power transmitting tubes of anode dissipation up to 1kW$145.00
- GB/T 6257-2015Blank detail specification for transmitting tubes$145.00
- GB/T 6258-1986Blank detail specification for disk seal power tubes$285.00
- GB/T 6261-1986Fixed capacitors for use in electronic equipment Part 5: Sectional specification--Fixed mica dielectric direct current capacitors with a rated voltage not exceeding 3000V$255.00
- GB/T 6261-1998Fixed capacitors for use in electronic equipment. Part 5: Sectional specification Fixed mica dielectric d.c.capacitors with a rated voltage not exceeding 3000V Selection of methods of test and general requirements$255.00
- GB/T 6262-1986Fixed capacitors for use in electronic equipment Part 5: Blank detail specification--Fixed mica dielectric capacitors Assessment level E$135.00
- GB/T 6262-1998Fixed capacitors for use in electronic equipment. Part 5: Blank detail specification Fixed mica dielectric d.c.capacitors with a rated voltage not exceeding 3000V Assessment level E$135.00
- GB/T 6269-1986Specifications for Brinell hardness testers$169.00
- GB/T 6270-1986Standard blocks of Brinell hardness$169.00
- GB/T 6274-1986Fertilizer--Terms and definitions$560.00
- GB/T 6274-1997Fertilizers and soil conditioners. Vocabulary$560.00
- GB/T 6274-2016Fertilizers and soil conditioners - Vocabulary$560.00
- GB/T 6274-2025Fertilizers, soil conditioners and beneficial substances - Vocabulary$560.00
- GB/T 6275-1986Ammonium hydrogen carbonate for industrial use$79.00
- GB/T 6276.1-1986Ammonium hydrogen carbonate for industrial use--Determination of total alkalinity--Volumetric method$105.00
- GB/T 6276.1-2008Determination of ammonium hydrogen carbonate for industrial use -- Part 1: Ammonium hydrogen carbonate content -- Acid-base method$105.00
- GB/T 6276.2-1986Ammonium hydrogen carbonate for industrial use--Determination of chloride content--Potentiometric method$105.00
- GB/T 6276.2-2010Determination of ammonium hydrogen carbonate for industrial use -- Part 2: Chloride content -- Potentiometric titration method$105.00
- GB/T 6276.3-1986Ammonium hydrogen carbonate for industrial use--Determination sulphide content--Visible turbidimetric method$105.00
- GB/T 6276.3-2010Determination of ammonium hydrogen carbonate for industrial use -- Part 3: Sulphide content -- Visible turbidimetric method$105.00
- GB/T 6276.4-1986Ammonium hydrogen carbonate for industrial use--Determination sulphate content--Visible turbidimetric method$105.00
- GB/T 6276.4-2010Determination of ammonium hydrogen carbonate for industrial use -- Part 4: Sulphate content -- Visible turbidimetric method$105.00
- GB/T 6276.5-1986Ammonium hydrogen carbonate for industrial use--Determination of ash content--Gravimetric method$105.00
- GB/T 6276.5-2010Determination of ammonium hydrogen carbonate for industrial use -- Part 5: Ash content -- Gravimetric method$105.00
- GB/T 6276.6-1986Ammonium hydrogen carbonate for industrial use--Determination of iron content--O-phenanthroline spectrophotometric method$105.00
- GB/T 6276.6-2010Determination of ammonium hydrogen carbonate for industrial use -- Part 6: Iron content -- O-phenathroline spectrophotometric method$105.00
- GB/T 6276.7-1986Ammonium hydrogen carbonate for industrial use--Determination of arsenic content--Silver diethyl dithiocarbamate photometric method$105.00
- GB/T 6276.7-2010Determination of ammonium hydrogen carbonate for industrial use-Part 7:Arsenic content-Silver diethyl dithiocarbamate photometric method$105.00
- GB/T 6276.8-1986Ammonium hydrogen carbonate for industrial use--Determination of arsenic content--Gutzeit method$105.00
- GB/T 6276.8-2010Determination of ammonium hydrogen carbonate for industrial use-Part 8:Arsenic content-Gutzeit method$105.00
- GB/T 6276.9-1986Ammonium hydrogen carbonate for industrial use--Determination of heavy metal content--Visible turbidimetric method$105.00
- GB/T 6276.9-2010Determination of ammonium hydrogen carbonate for industrial use -- Part 9: Health metal content -- Visible turbidimetric method$105.00
- GB/T 6277-1986Methods of measurement for television transmitters$740.00
- GB/T 6278-1986Simulated programme signal$75.00
- GB/T 6278-2012Simulated programme signal$75.00
- GB/T 6282-1986Interface parameters of the 25 to 1000MHz land mobile telecommunication network connecting to public telecommunication network through subscriber lines$65.00
- GB/T 6283-1986Chemical products--Determination of water--Karl Fischer method (general method)$75.00
- GB/T 6283-2008Chemical products -- Determination of water Karl-Fischer method (general method)$75.00
- GB/T 6284-1986Chemical products for industrial use--General method for determination of water content--Gravimetric method$95.00
- GB/T 6284-2006Chemical products for industrial use - General method for determination of water content - The loss of mass on drying method$95.00
- GB/T 6285-1986Determination of trace oxygen in gases--Electrochemical method$145.00
- GB/T 6285-2003Determination of trace oxygen in gases - Electrochemical method$145.00
- GB/T 6285-2016Determination of trace oxygen in gases—Electrochemical method$145.00
- GB/T 6286-1986Determination of bulk density for molecular sieve$165.00
- GB/T 6286-2021Determination of bulk density for molecular sieve$165.00
- GB/T 6287-1986Determination of static adsorbed water for molecular sieve$150.00
- GB/T 6287-2021Determination of static adsorbed water for molecular sieve$150.00
- GB/T 6288-1986Determination of particle size for granular molecular sieve$150.00
- GB/T 6288-2021Determination of particle size for granular molecular sieve$150.00
- GB/T 6289-1986Pliers and nippers--Nomenclature$195.00
- GB/T 6289-1999Pliers and nippers--Nomenclature$195.00
- GB/T 6289-2013Pliers and nippers -- Nomenclature$195.00
- GB/T 6290-1986Pliers and nippers--General technical requirements$85.00
- GB/T 6290-1999Pliers and nippers--General technical requirements$85.00
- GB/T 6290-2013Pliers and nippers -- General technical requirements$85.00
- GB/T 6290-2026Nippers and cutting pliers - General technical specifications$255.00
- GB/T 6291-1986Pliers and nippers--Methods of test$195.00
- GB/T 6291-1999Pliers and nippers--Methods of test$195.00
- GB/T 6291-2013Pliers and nippers -- Methods of test$195.00
- GB/T 6296-1986Grey cast iron impact test$79.00
- GB/T 6297-1986Standard test method for differential thermal analysis of raw materials of domestic ceramic$169.00
- GB/T 6297-2002Standard test method for differential thermal analysis of row materials of ceramic$95.00
- GB/T 6298-1986Hull quality requirements for ferrocement ships$79.00
- GB/T 6300-1986Regulations for submission of the shipfinished documents$240.00
- GB/T 6300-2007Regulations for submission of the ship finished documents$240.00
- GB/T 6300-2025Regulations for the compilation and submission of a ship's finished documents$240.00
- GB/T 6301-1986Determination of fuel consumption rate for marine diesel engine$79.00
- GB/T 6302-1986Measurement of thermodynamics parameters for marine diesel engine$79.00
- GB/T 6303-1986Method of inspection for ship filter$79.00
- GB/T 6311-1986Long range dial gauges$79.00
- GB/T 6311-2004Long span dial gauges reading in 0. 01mm$85.00
- GB/T 6312-1986Tube micrometers$150.00
- GB/T 6312-2004Micrometer for measuring pipe wall thicknesses$150.00
- GB/T 6312-2022Micrometer for measuring pipe wall thicknesses$150.00
- GB/T 6313-1986Point micrometers$105.00
- GB/T 6313-2004Pointed contact micrometer with conical tips$105.00
- GB/T 6313-2018Pointed-contact micrometer with conical tips$105.00
- GB/T 6314-1986Three point internal micrometers$205.00
- GB/T 6314-2004Internal micrometer with three-point contact$205.00
- GB/T 6314-2018Internal micrometer with three-point contact$205.00
- GB/T 6315-1996Vernier universal bevel protractor$300.00
- GB/T 6315-2008Vernier, dial and digital display universal bevel protractors$300.00
- GB/T 6315-2025Vernier, dial and digital display universal bevel protractors$300.00
- GB/T 6316-1996Gear tooth vernier calipers$105.00
- GB/T 6316-2008Vernier, dial and digital indicating gear tooth callipers$105.00
- GB/T 6317-1993Dail calipers$325.00
- GB/T 6320-1986Mechanical dial comparators$85.00
- GB/T 6320-1997Mechanical dial comparators$85.00
- GB/T 6320-2008Mechanical dial comparators$85.00
- GB/T 6321-1986Spring-optical measuring heads, opticators$105.00
- GB/T 6321-2004Spring-optical measuring heads$105.00
- GB/T 6322-1986Types and dimensions of plain limit gauges$79.00
- GB/T 6323-2014Controllability and Stability Test Procedure for Automobile$475.00
- GB/T 6323.1-1994Controllability and stability test procedure for automobiles- Pylon course slalom test$354.00
- GB/T 6323.2-1994Controllability and stability test procedure for automobiles- Steering transient response test (Steering wheel angle step input)$135.00
- GB/T 6323.3-1994Controllability and stability test procedure for automobiles-Steering transient response test (Steering wheel angle pulse input)$249.00
- GB/T 6323.4-1994Controllability and stability test procedure for automobiles-Returnability test$105.00
All GB/T ranges
- GB/T 1.1-1993 – GB/T 245-2016
- GB/T 246-1982 – GB/T 601-2002
- GB/T 601-2016 – GB/T 915-1995
- GB/T 915-2010 – GB/T 1303-1977
- GB/T 1303.1-1998 – GB/T 1617-1989
- GB/T 1617-2002 – GB/T 1927.9-2021
- GB/T 1928-1991 – GB/T 2399-2003
- GB/T 2399-2014 – GB/T 2590.6-1981
- GB/T 2590.7-1981 – GB/T 2900.17-1994
- GB/T 2900.17-2009 – GB/T 3048.4-1994
- GB/T 3048.4-2007 – GB/T 3280-1992
- GB/T 3280-2007 – GB/T 3533.2-1984
- GB/T 3533.2-2017 – GB/T 3789.14-1991
- GB/T 3789.15-1991 – GB/T 3903.6-2017
- GB/T 3903.6-2024 – GB/T 4148-1993
- GB/T 4148-2003 – GB/T 4334-2008
- GB/T 4334-2020 – GB/T 4649-2008
- GB/T 4649-2018 – GB/T 4752-1984
- GB/T 4752-2002 – GB/T 4955-1997
- GB/T 4955-2005 – GB/T 5033-1985
- GB/T 5034-1985 – GB/T 5169.8-1985
- GB/T 5169.9-1993 – GB/T 5340.3-2006
- GB/T 5341-1985 – GB/T 5585.1-2005
- GB/T 5585.1-2018 – GB/T 5824-2008
- GB/T 5824-2021 – GB/T 6102.2-1985
- GB/T 6102.2-2009 – GB/T 6323.4-1994
- GB/T 6323.5-1994 – GB/T 6553-2014
- GB/T 6553-2024 – GB/T 6742-2007
- GB/T 6743-1986 – GB/T 6988.6-1993
- GB/T 6989-1986 – GB/T 7284-1998
- GB/T 7284-2016 – GB/T 7596-2000
- GB/T 7596-2008 – GB/T 7739.6-2021
- GB/T 7739.7-2007 – GB/T 8059.2-1987
- GB/T 8059.2-1995 – GB/T 8303-1987
- GB/T 8303-2002 – GB/T 8638.1-1988
- GB/T 8638.10-1988 – GB/T 8995-2026
- GB/T 8996-1988 – GB/T 9275-1988
- GB/T 9275-2008 – GB/T 9652.1-1997
- GB/T 9652.1-2007 – GB/T 9938-2013
- GB/T 9941-1988 – GB/T 10178-1988
- GB/T 10178-2006 – GB/T 10512-1989
- GB/T 10512-2008 – GB/T 10870-1989
- GB/T 10870-2001 – GB/T 11168-2009
- GB/T 11170-1989 – GB/T 11464-2013
- GB/T 11465-1989 – GB/T 11896-1989
- GB/T 11897-1989 – GB/T 12196-1990
- GB/T 12197-1990 – GB/T 12510-2015
- GB/T 12511-1990 – GB/T 12690.6-2017
- GB/T 12690.7-1990 – GB/T 12959-2008
- GB/T 12959-2024 – GB/T 13210-2024
- GB/T 13211-1991 – GB/T 13459-1992
- GB/T 13459-2008 – GB/T 13663.2-2018
- GB/T 13663.3-2018 – GB/T 13869-2008
- GB/T 13869-2017 – GB/T 14074.2-1993
- GB/T 14074.3-1993 – GB/T 14328.4-1993
- GB/T 14329-2008 – GB/T 14506.15-1993
- GB/T 14506.15-2010 – GB/T 14684-2011
- GB/T 14684-2022 – GB/T 14926.21-1994
- GB/T 14926.21-2001 – GB/T 15079.3-1994
- GB/T 15079.4-1994 – GB/T 15328-1994
- GB/T 15328-2009 – GB/T 15590-1995
- GB/T 15590-2008 – GB/T 15806-1995
- GB/T 15806-2006 – GB/T 16085-1995
- GB/T 16086-1995 – GB/T 16478.4-1996
- GB/T 16478.5-1996 – GB/T 16674.2-2016
- GB/T 16674.3-2023 – GB/T 16895.1-2008
- GB/T 16895.10-2001 – GB/T 17149.4-1997
- GB/T 17149.5-1997 – GB/T 17367-1998
- GB/T 17368-1998 – GB/T 17607-1998
- GB/T 17608-1998 – GB/T 17783-1999
- GB/T 17783-2019 – GB/T 17980.143-2004
- GB/T 17980.144-2004 – GB/T 18122-2000
- GB/T 18123-2000 – GB/T 18311.2-2026
- GB/T 18311.20-2007 – GB/T 18508-2001
- GB/T 18508-2014 – GB/T 18779.3-2023
- GB/T 18779.4-2020 – GB/T 18932.11-2002
- GB/T 18932.12-2002 – GB/T 19208-2003
- GB/T 19208-2008 – GB/T 19449.4-2013
- GB/T 19450-2004 – GB/T 19699-2023
- GB/T 19700-2005 – GB/T 19952-2005
- GB/T 19953-2005 – GB/T 20168-2006
- GB/T 20168-2017 – GB/T 20443-2006
- GB/T 20444-2006 – GB/T 20736-2006
- GB/T 20736-2025 – GB/T 20975.15-2008
- GB/T 20975.15-2020 – GB/T 21283.5-2008
- GB/T 21283.6-2015 – GB/T 21623-2008
- GB/T 21624-2008 – GB/T 21930-2008
- GB/T 21931.1-2008 – GB/T 22260-2023
- GB/T 22261-2008 – GB/T 22527-2008
- GB/T 22528-2008 – GB/T 22838.2-2009
- GB/T 22838.3-2009 – GB/T 23274.7-2009
- GB/T 23274.8-2009 – GB/T 23576-2024
- GB/T 23577-2009 – GB/T 23901.1-2009
- GB/T 23901.1-2019 – GB/T 24301-2009
- GB/T 24302-2009 – GB/T 24639-2009
- GB/T 24640-2009 – GB/T 24975.3-2010
- GB/T 24975.4-2010 – GB/T 25271-2010
- GB/T 25272-2010 – GB/T 25707-2010
- GB/T 25707-2025 – GB/T 26052-2010
- GB/T 26052-2022 – GB/T 26412-2010
- GB/T 26413-2010 – GB/T 26803.1-2011
- GB/T 26803.2-2011 – GB/T 27534.2-2025
- GB/T 27534.3-2011 – GB/T 27919-2011
- GB/T 27920.1-2011 – GB/T 28410-2012
- GB/T 28410-2025 – GB/T 28819-2023
- GB/T 28821-2012 – GB/T 29229-2012
- GB/T 29230.1-2012 – GB/T 29618.1-2013
- GB/T 29618.1-2017 – GB/T 30095-2013
- GB/T 30096-2013 – GB/T 30420.1-2013
- GB/T 30420.2-2019 – GB/T 30845.2-2021
- GB/T 30846-2014 – GB/T 31230.3-2014
- GB/T 31230.4-2014 – GB/T 31586.2-2015
- GB/T 31587-2015 – GB/T 32065.8-2020
- GB/T 32065.9-2019 – GB/T 32413-2015
- GB/T 32414-2015 – GB/T 32800.5-2023
- GB/T 32800.6-2023 – GB/T 33162-2016
- GB/T 33163-2016 – GB/T 33525-2025
- GB/T 33526-2017 – GB/T 33887-2017
- GB/T 33888-2017 – GB/T 34308.2-2017
- GB/T 34308.3-2017 – GB/T 34690.7-2017
- GB/T 34690.8-2017 – GB/T 35111-2017
- GB/T 35112-2017 – GB/T 35521-2017
- GB/T 35522-2017 – GB/T 35966-2018
- GB/T 35967-2018 – GB/T 36410.4-2018
- GB/T 36410.5-2018 – GB/T 36818-2018
- GB/T 36819-2018 – GB/T 37270.2-2018
- GB/T 37270.3-2018 – GB/T 37721-2019
- GB/T 37722-2019 – GB/T 38136-2019
- GB/T 38137-2019 – GB/T 38593-2020
- GB/T 38594-2020 – GB/T 39039-2020
- GB/T 39040-2020 – GB/T 39493-2020
- GB/T 39494-2020 – GB/T 39914-2021
- GB/T 39915-2021 – GB/T 40392-2021
- GB/T 40393-2021 – GB/T 40837-2021
- GB/T 40838-2021 – GB/T 41329-2022
- GB/T 41330-2022 – GB/T 41805-2022
- GB/T 41806-2022 – GB/T 42272-2022
- GB/T 42273-2022 – GB/T 42890-2023
- GB/T 42891-2023 – GB/T 43448-2023
- GB/T 43449-2023 – GB/T 44014-2024
- GB/T 44020-2024 – GB/T 44596-2024
- GB/T 44597-2024 – GB/T 45169-2025
- GB/T 45170-2024 – GB/T 45677-2025
- GB/T 45678-2025 – GB/T 46128-2025
- GB/T 46129-2025 – GB/T 46594-2026
- GB/T 46595-2025 – GB/T 47055-2026
- GB/T 47056-2026 – GB/T 47534-2026
- GB/T 47535-2026 – GB/T 48000.3-2026
- GB/T 48000.4-2026 – GB/T 48446-2026
- GB/T 48447-2026 – GB/T 51013-2014
- GB/T 51015-2014 – GB/T 30685-2024
- GB/T 30819-2024 – GB/T 43746.3-2024
- GB/T 43753.1-2024 – GB/T 9914.2-2013