GB/T 6185.1-2016Prevailing torque type all-metal hexagon nuts, style 2 (English PDF)

Foreword

This Part of GB/T 6185 is one national standard of "Prevailing torque type

hexagon nuts" series. This series includes.

- GB/T 889.1, Prevailing torque type hexagon nuts (with non-metallic insert),

style 1;

- GB/T 889.2, Prevailing torque type hexagon nuts (with non-metallic insert),

Style 1--Fine pitch thread;

- GB/T 6172.2, Prevailing torque type hexagon thin nuts (with non-metallic

insert);

- GB/T 6182, Prevailing torque type hexagon nuts (with non-metallic insert),

style 2;

- GB/T 6183.1, Prevailing torque type hexagon nuts with flange (with non-

metallic insert), style 2;

- GB/T 6183.2, Prevailing torque type hexagon nuts with flange (with non-

metallic insert) with fine pitch thread;

- GB/T 6184, Prevailing torque type all-metal hexagon nuts, style 1;

- GB/T 6185.1, Prevailing torque type hexagon nuts with flange (with non-

metallic insert), style 2;

- GB/T 6185.2, Prevailing torque type all-metal hexagon nuts with flange,

style 2 - Fine pitch thread;

- GB/T 6187.1, Type 2 all-metal hexagon nuts with flange;

- GB/T 6187.2, Prevailing torque type all-metal hexagon nuts with flange

with fine pitch thread.

This Part is the first part of GB/T 6185.

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This Standard replaces GB/T 6185.1-2000 Prevailing torque type all-metal

hexagon nuts, style 2. Compared with GB/T 6185.1-2000, the main technical

changes are as follows.

- deleted "If other technical requirements are required,... select among

(such as GB/T 3098.9 and GB/T 3103.1)" (Clause 1 of Edition 2000);

- unified reference thread standards as GB/T 193, GB/T 9145 (Clause 2);

Prevailing torque type all-metal hexagon nuts, style 2

1 Scope

This Part of GB/T 6185 specifies type sizes, technical conditions and marks of

prevailing torque type all-metal hexagon nuts, style 2.

This Standard is applicable to prevailing torque type all-metal hexagon nuts,

style 2 of which thread sizes are M5 ~ M36, performance grades are 5, 8, 10

and 12, the product grades are A and B. Grade A is used for nuts of which D <=

16 mm; Grade B is used for nuts of which D > 16 mm.

NOTE In addition to mw and hmax, this nut equals to GB/T 6175 nut.

2 Normative references

The following referenced documents are indispensable for the application of

this document. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any

amendments) applies.

GB/T 90.1, Fasteners--Acceptance inspection (GB/T 90.1-2002, ISO

3269.2000, IDT);

GB/T 90.2, Fasteners--Marking and packaging;

GB/T 193, General purpose metric screw threads - General plan (GB/T 193-

2003, ISO 261.1998, MOD);

GB/T 1237, Designation system for fasteners (GB/T 1237-2000, eqv ISO

8991.1986);

GB/T 3098.2, Mechanical properties of fasteners - Nuts (GB/T 3098.2-2015,

ISO 898-2.2012, MOD);

GB/T 3098.9, Mechanical properties of fasteners - Prevailing torque type

steel nuts (GB/T 3098.9-2010, ISO 2320.2008, IDT);

GB/T 3103.1, Tolerances for fasteners- Bolts, screws and nuts (GB/T 3103.1-

2002, idt ISO 4759-1.2000);

GB/T 5267.1, Fasteners - Electroplated Coatings (GB/T 5267.1-2002, ISO

4042.1999, IDT);

......