GB/T 6135.1-2008Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank (English PDF)
直柄麻花钻 第1部分：粗直柄小麻花钻的型式和尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6135.1-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 4, 2008
Implementation date
April 1, 2009
Scope
GB/T 6135.1-2008 is the English-translated version of 直柄麻花钻 第1部分：粗直柄小麻花钻的型式和尺寸.
GB/T 6135.1-2008 is the Chinese standard "Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank".
Its scope clause reads: GB/T 6135 This section provides a crude little twist straight shank types and dimensions. This section applies to a diameter of 0.10mm ~ 0.35mm thick straight shank twist drill small. Its clauses include symbol; type and size.
Found what you need?
Document preview — GB/T 6135.1-2008
National Standard of the People's Republic of China
- ICS
- 25.100.30
- Classification
- J 41
- Replacing
- GB/T 6135.1-1996
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
GB/T 6135 This section provides a crude little twist straight shank types and dimensions.
This section applies to a diameter of 0.10mm ~ 0.35mm thick straight shank twist drill small.
2 Symbol
3 type and size
Small 3.1 coarse straight shank twist drill types and dimensions specified in Figure 1 and Table 1, respectively.
Figure 1
Table 1 millimeters h7
± 1 js15 min h8
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 6135.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6135.1-2008 | Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank | current edition | Current |
| GB/T 6135.1-1996 | Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank | previous edition | Superseded |
This page sells the current edition, GB/T 6135.1-2008. Earlier editions are listed for reference only.
How to Download GB/T 6135.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6135.2-2008 — Parallel shank twist drills -- Part 2: The types and dimensions for parallel shank stub series twist drills and parallel shank jobber series twist drills
GB/T 6135.3-2008 — Parallel shank twist drills -- Part 3: The types and dimensions for parallel shank long series twist drills
GB/T 6135.4-2008 — Parallel shank twist drills -- Part 4: The types and dimensions for extra-long parallel shank twist drills
Secure payment via Stripe
Payments accepted
GB/T 6135.1-2008
$75.00