GB/T 6202-2019Wide belt sanding machine (English PDF)
宽带式砂光机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6202-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 6202-2019 is the English-translated version of 宽带式砂光机.
GB/T 6202-2019 is the Chinese standard "Wide belt sanding machine". Its scope clause reads: This standard specifies the main parameters, requirements, inspection rules and signs, packaging and storage of broadband sanding machines.
This standard applies to the decorative laminate of solid wood panels, wood and non-wood panels and their components, inorganic lightweight panels, thermosetting resins.
Wide-band sander (hereinafter referred to as sander) for grinding of sheet metal and sheet metal. Its clauses include sketch.
Found what you need?
Document preview — GB/T 6202-2019
National Standard of the People's Republic of China
- ICS
- 79.120.10
- Classification
- B 97
- Replacing
- GB/T 6202-2000
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the main parameters, requirements, inspection rules and signs, packaging and storage of broadband sanding machines.
This standard applies to the decorative laminate of solid wood panels, wood and non-wood panels and their components, inorganic lightweight panels, thermosetting resins.
Wide-band sander (hereinafter referred to as sander) for grinding of sheet metal and sheet metal.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 1184 Shape and position tolerances without tolerance values
GB/T 1958-2017 Geometrical Product Specification (GPS) Geometric Tolerance Detection and Verification
GB 2894 safety signs and guidelines for their use
GB/T 3280 stainless steel cold rolled steel plate and strip
General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components
GB/T 4237 stainless steel hot rolled steel sheet and strip
GB/T 4897 Particleboard
GB/T 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 7251.1 Low-voltage switchgear and control equipment - Part 1. General
GB/T 7932 Pneumatic pairing system and its components general rules and safety requirements
GB/T 9061 General technical requirements for metal cutting machine tools
GB/T 9239.1 Mechanical vibration constant (rigid) rotor balance quality requirements - Part 1
GB/T 11718 medium density fiberboard
GB/T 13306 signage
General technical conditions for GB/T 13384 mechanical and electrical product packaging
General technical conditions for safety protection of GB 15760 metal cutting machine tools
GB/T 18262 General technical conditions for wood-based panel machinery
GB/T 18514 Wood-based panel machinery safety rules
JB/T 5000.3 General technical requirements for heavy machinery - Part 3. Welding parts
JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method
3 sketch
3.1
The structure of the single-side sander (work bench) is shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 6202
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6202-2019 | Wide belt sanding machine | current edition | Current |
| GB/T 6202-2000 | Wide belt sanding machine | previous edition | Superseded |
This page sells the current edition, GB/T 6202-2019. Earlier editions are listed for reference only.
How to Download GB/T 6202-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6202-2019
$235.00