GB/T 6316-2008Vernier, dial and digital indicating gear tooth callipers (English PDF)
游标、带表和数显齿厚卡尺
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6316-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 2, 2008
Implementation date
July 1, 2008
Scope
GB/T 6316-2008 is the English-translated version of 游标、带表和数显齿厚卡尺.
GB/T 6316-2008 is the Chinese standard "Vernier, dial and digital indicating gear tooth callipers".
Its scope clause reads: This standard specifies the vernier caliper tooth thickness, tooth thickness caliper tooth thickness caliper digital display of terms and definitions, forms and basic parameters with tables, requirements, Test conditions, test methods, test methods, marking and packaging.
This standard applies to the value of indexing/resolution of 0.01mm and 0.02mm, measuring gear modulus in the range of (1 ~ 16) mm, (1 ~ 26) mm, (5 ~ 32) mm and (15 ~ 55) mm thick tooth vernier caliper with digital display table tooth thickness caliper tooth thickness caliper (hereinafter referred to as "Tooth thickness caliper"). Its clauses include terms and definitions; form and basic parameters.
Found what you need?
Document preview — GB/T 6316-2008
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Classification
- J 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 form and basic parameters
1 Scope
This standard specifies the vernier caliper tooth thickness, tooth thickness caliper tooth thickness caliper digital display of terms and definitions, forms and basic parameters with tables, requirements,
Test conditions, test methods, test methods, marking and packaging.
This standard applies to the value of indexing/resolution of 0.01mm and 0.02mm, measuring gear modulus in the range of (1 ~ 16) mm, (1 ~ 26) mm, (5 ~ 32) mm and (15 ~ 55) mm thick tooth vernier caliper with digital display table tooth thickness caliper tooth thickness caliper (hereinafter referred to as
"Tooth thickness caliper").
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1800.1-1997 Limits and fits - Bases - Part 1. Vocabulary
GB/T 2423.3-1993 electric and electronic products environmental testing procedures Test Ca. Damp heat test method (eqv IEC 60068-2-3. 1984)
GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT)
GB 4208-1993 housing protection (IP Code) (eqv IEC 529. 1989)
GB/T 17163 dimensional measuring instruments - Basic terminology
GB/T 17164 dimensional measuring instruments - Product terms
GB/T 17626.2-1998 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.1995,
IDT)
GB/T 17626.3-1998 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-
3.1995, IDT)
3 Terms and Definitions
GB/T 1800.1-1997, GB/T 17163 and GB/T 17164 and established in the following terms and definitions apply to this standard.
3.1
When the tooth thickness caliper digital display normal values foot frame relative to the maximum moving speed of the main scale.
3.2
The technical specifications, rules for error tooth thickness caliper prescribed limits.
Note. The tolerance limit can not be less than the digital differential (resolution) or vernier scale interval.
4 form and basic parameters
4.1
tooth thickness caliper in the form shown in Figure 1. Illustration illustration purposes only and does not indicate a detailed structure.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 6316-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6316-2008
$105.00