Search GB/T
500 GB/T standards in English, from GB/T 8996-1988 to GB/T 9275-1988, in code order.
- GB/T 8996-1988Dimensions of sample planchets used in nuclear electronic instruments$79.00
- GB/T 8997-1988Calibration for alpha, beta surface contamination meters and monitors$135.00
- GB/T 8997-2008Calibration for alpha, beta and alpha/beta surface contamination meters and monitors$135.00
- GB/T 8998-1988Environmental thermoluminescence dosimeter and its usage$79.00
- GB/T 9001-1988Method of measurement on audio amplifier$1,260.00
- GB/T 9002-1996Vocabulary for audio, video and audiovisual equipment and systems$1,100.00
- GB/T 9002-2017Vocabulary for audio,video and audiovisual equipment and systems$1,100.00
- GB/T 9003-1988Methods of measurement for the fundamental characteristics of mixing console$135.00
- GB/T 9008-1988Terms of liquid chromatography--Liquid column chromatography and planar chromatography$560.00
- GB/T 9008-2007Terms of liquid chromatography - Liquid column chromatography and planar chromatography$560.00
- GB/T 9009-1998Formaldehyde solution for industrial use$315.00
- GB/T 9009-2011Formaldehyde solution for industrial use$315.00
- GB/T 9015-1988Hexamethylene-tetramine for industrial use$240.00
- GB/T 9015-1998Hexamethylenetetramine for industrial use$240.00
- GB/T 9015-2025Hexamethylenetetramine for industrial use$240.00
- GB/T 9016-1988Difluorochloromethane for tetrafluoroethylene production$79.00
- GB/T 9017-1988Trifluorochloromethane$79.00
- GB/T 9019-1988Nominal diameter of pressure vessel$175.00
- GB/T 9019-2001Nominal diameter of pressure vessels$75.00
- GB/T 9019-2015Nominal diameter for pressure vessels$75.00
- GB/T 9020-1988Visual-frequency coaxial connectors, Generic specification of$395.00
- GB/T 9025-1988Cabled distribution systems primarily intended for sound and television signals operating between30 MHz and 1 GHz. Electrical and mechanical matching values$85.00
- GB/T 9026-1988Performance requirements for marker beacon$85.00
- GB/T 9026-2000Performance requirements and test methods for marker beacon$85.00
- GB/T 9027-1988Performance requirements for non-directional raido beacon$85.00
- GB/T 9027-2000Performance requirements and test methodsfor non-directional radio beacon$85.00
- GB/T 9029-1988Method of measurement of speed fluctuations in sound recording and reproducing equipment$165.00
- GB/T 9029-2011Methods of the measurement of speed fluctuations in sound recording and reproducing equipment$165.00
- GB/T 9030-1988Performance requirements for shipborne radio direction finder$85.00
- GB/T 9031-1988Requirements for the interconnection and matching of household sound system equipment$105.00
- GB/T 9032-1988Performance requirements of pushbutton telephone with pulse$165.00
- GB/T 9033-1988Performance requirements of pushbutton dialer with pulse$165.00
- GB/T 9034-1988Performance requirements of pushbutton telephone with DTMF$165.00
- GB/T 9035-1988Performance requirements of pushbutton dialer with DTMF$165.00
- GB/T 9037.1-1988The specifications for photographic facsimile apparatus$245.00
- GB/T 9037.2-1988Measuring methods for photographic facsimile apparatus$245.00
- GB/T 9039-1988Technical condition for transmission measuring set 10kHz to 18. 6MHz$395.00
- GB/T 9040-1988General specifications for 4GHz 960 telephone channel/colour TV analog radio relay communication equipments$235.00
- GB/T 9043-1999General technical requirements of gas discharge tubes for the over-voltage protection of telecommunications installations$225.00
- GB/T 9043-2008technical requirements of gas discharge tubes for the over-voltage protection of telecommunications installations$225.00
- GB/T 9045-1988Determination of resolving power for photographic materials$195.00
- GB/T 9045-2006Photography -- Photographic materials -- Determination of ISO resolving power$195.00
- GB/T 9047-1988Six-track magnetic sound records on 70mm motion-picture release prints--Locations and dimensions$79.00
- GB/T 9048-1988Image area produced by 65mm and 70mm motion-picture camera aperture and maximum projectable image area on 70mm motion-picture prints. Positions and dimensions$79.00
- GB/T 9050-1988General specifications for 8GHz band microwave communication equipment used in analogue radio-relay systems$225.00
- GB/T 9056-1988Steel rulers$100.00
- GB/T 9056-2004Metal ruler$100.00
- GB/T 9057-1988Single-body inside micrometers$79.00
- GB/T 9058-1988Odd fluted micrometer$210.00
- GB/T 9058-2004Micrometer with prismatically arranged measuring faces$210.00
- GB/T 9058-2024Odd fluted micrometer$210.00
- GB/T 9059-1988Precision gear shaping machines--Testing of the accuracy$385.00
- GB/T 9061-1988General specifications for metal-cutting machine tools$360.00
- GB/T 9061-2006General specifications for metal-cutting machine tools$360.00
- GB/T 9061-2025Metal-cutting machine tools - General specifications$360.00
- GB/T 9062-1988Side and face milling cutters with double alternate helical teeth with carbide tips$125.00
- GB/T 9062-2006Side and face milling cutters with double alternate helical teeth with carbide tips$125.00
- GB/T 9065.1-1988Hydraulic fluid power--Hose connector--Connecting dimension - Part 1: Flare type$355.00
- GB/T 9065.1-2015Hydraulic hose fittings -- Part 1: Hose fittings with O-ring face seal ends$355.00
- GB/T 9065.2-1988Hydraulic fluid power--Hose connector--Connecting dimension - Part 2: Insert type$360.00
- GB/T 9065.2-2010Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with 24-degreecone connector ends$360.00
- GB/T 9065.2-2025Connections for hydraulic fluid power - Hose fittings - Part 2: 24° cone connectors$360.00
- GB/T 9065.3-1988Hydraulic fluid power. Hose connector. Connecting dimension - Part 3: Welding or quick-action type$360.00
- GB/T 9065.3-2020Chinese standard$460.00
- GB/T 9065.3-2026Connections for hydraulic fluid power - Hose fittings - Part 3: Flange ends$360.00
- GB/T 9065.4-2020Connections for hydraulic fluid power--Hose fittings - Part 4: Stud ends$210.00
- GB/T 9065.5-2010Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with 37-degreedegree flared ends$225.00
- GB/T 9065.6-2020Connections for hydraulic fluid power--Hose fittings - Part 6: 60° cone ends$210.00
- GB/T 9068-1988Determination of sound power levels for noise emitted by heating,ventilating and air conditioning equipments. Engineering method$165.00
- GB/T 9068-2025Determination of sound power levels of refrigeration and air-conditioning equipment - Sound pressure methods$485.00
- GB/T 9069-1988Determination of sound power level for noise emitted by reciprocating pump--Engineering method$285.00
- GB/T 9069-2008Determination of sound power level for noise emitted by reciprocating pump - Engineering method$285.00
- GB/T 9072-1988Silk fabric for electric insulation$205.00
- GB/T 9074.1-1988Cross recessed pan head screw and plain washer assemblies$165.00
- GB/T 9074.1-2002Bolt or screw and washer assemblies with plain washers$125.00
- GB/T 9074.1-2018Bolt or screw and washer assemblies with plain washers$125.00
- GB/T 9074.10-1988Cross recessed raised countersunkhead screw and countersunk external toothed lock washer assemblies$79.00
- GB/T 9074.11-1988Cross recessed hexagon bolt with indentation and plain washer assemblies$79.00
- GB/T 9074.12-1988Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies$79.00
- GB/T 9074.13-1988Cross recessed hexagon bolt with indentation��single coil lock washer and plain washer assemblies$79.00
- GB/T 9074.15-1988Hexagon head bolt and single coil spring lock washer assemblies$79.00
- GB/T 9074.16-1988Hexagon head bolt and serrated lock washer external teeth assemblies$79.00
- GB/T 9074.17-1988Hexagon head bolt��single coil spring lock washer and plain washer assemblies$79.00
- GB/T 9074.18-1988Cross recessed pan head tapping screw and plain washer assemblies$165.00
- GB/T 9074.18-2002Tapping screw and washer assemblies with plain washers$75.00
- GB/T 9074.18-2017Tapping screw and washer assemblies with plain washers$75.00
- GB/T 9074.2-1988Cross recessed pan head screw andserrated lock washer external teeth assemblies$79.00
- GB/T 9074.20-1988Cross recessed hexagon head tapping sorew with indentation and plain washer assemblies$85.00
- GB/T 9074.20-2004Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers$85.00
- GB/T 9074.21-1988Cross recessed hexagon head tapping screw with indentation and large plain washer assemblies$79.00
- GB/T 9074.26-1988Single coil spring lock washer for assembly$65.00
- GB/T 9074.27-1988Serrated lock washer external teeth for assembly$65.00
- GB/T 9074.28-1988Countersunk external toothed lock washer for assembly$65.00
- GB/T 9074.3-1988Cross recessed pan head screw and single coil spring lock washer assemblies$79.00
- GB/T 9074.31-2017Conical spring washers for assemblies$75.00
- GB/T 9074.32-2017Bolt or screw and washer assemblies with conical spring washers$75.00
- GB/T 9074.4-1988Cross recessed pan head screw, single coil spring lock washer and plain washer assemblies$79.00
- GB/T 9074.5-1988Cross recessed small pan head screw and small plain washer assemblies$85.00
- GB/T 9074.5-2004Cross recessed small pan head screw andwasher assemblies with plain washers$85.00
- GB/T 9074.6-1988Cress recessed small pan head serew and big plain washer assemblies$79.00
- GB/T 9074.7-1988Cross recessed small pan head screw and single coil spring lock washer assemblies$79.00
- GB/T 9074.8-1988Cross recessed small pan headscrew, single coil spring lock washer and plain washer assemblies$55.00
- GB/T 9074.9-1988Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies$79.00
- GB/T 9075-2008Code for examination and discard of ropes for ropeway$165.00
- GB/T 9079-1988Determination of the smoke and dust of industrialkiln and furnace$79.00
- GB/T 9080-1988General technical requirements for railway signal DC neutral relays$105.00
- GB/T 9081-1988Dispensing gasoline pumps, piston type, electric$530.00
- GB/T 9081-1998Fuel dispensers for motor vehicles$225.00
- GB/T 9081-2001Fuel dispensers for motor vehicles$530.00
- GB/T 9081-2008Fuel dispensers for motor vehicles$530.00
- GB/T 9081-2023Fuel dispensers for motor vehicles$530.00
- GB/T 9082.1-1988Aluminium tubes used for wickless gravity heat pipes$300.00
- GB/T 9082.1-2011Wickless heat pipes$150.00
- GB/T 9082.1-2026Wickless heat pipes$300.00
- GB/T 9082.2-1988Wickless aluminium gravity heat pipes$255.00
- GB/T 9082.2-2011Heat pipes with wick inside$210.00
- GB/T 9082.2-2026Heat pipes with an internal wick$255.00
- GB/T 9086-1988The white ceramic standard plate for colorimetry and photometry$120.00
- GB/T 9086-2007The white standard plate for colorimetry and photometry$85.00
- GB/T 9086-2026White standard plates for colorimetry and photometry$120.00
- GB/T 9087-1988The white powdered standard plate for colorimetry and photometry$79.00
- GB/T 9088-1988Types organization method for electric tools$195.00
- GB/T 9088-2008Organization method for electric tools$195.00
- GB/T 9089.1-1988Electrical installations for outdoor sites under heavy conditions--Terms and definitions$240.00
- GB/T 9089.1-2008Electrical installations for outdoor Sites under heavy conditions - Part 1: Scope and definitions$240.00
- GB/T 9089.1-2021Electrical installations for outdoor sites under heavy conditions—Part 1: Vocabulary$240.00
- GB/T 9089.2-1988Electrical installations for outdoor sites under heavy conditions--General protection requirements$455.00
- GB/T 9089.2-2008Electrical installations for outdoor Sites under heavy conditions - Part 2: General protection requirements$455.00
- GB/T 9089.3-1991Electrical installations for outdoor sites under heavy conditions--General requirements for equipment and ancillaries$360.00
- GB/T 9089.3-2008Electrical installations for outdoor sites under heavy conditions - Part 3: General requirements for equipment and ancillaries$360.00
- GB/T 9089.3-2023Electrical installations for outdoor sites under heavy conditions—Part 3: General requirements for equipment and ancillaries$360.00
- GB/T 9089.4-1992Electrical installations for outdoor sites under heavy conditions. Repuirements for the installation$1,927.00
- GB/T 9089.4-2008Electrical installations for outdoor sites under heavy conditions -- Part 4: Requirements for the installation$85.00
- GB/T 9089.4-2026Electrical installations for outdoor sites under heavy conditions - Part 4: Requirements for the installation$1,927.00
- GB/T 9089.5-2008Electrical installations for outdoor sites under heavy conditions - Part 5: Operating requirements$150.00
- GB/T 9090-1988Standard capacitors$105.00
- GB/T 9091-1988Inductive voltage dividers$205.00
- GB/T 9091-2008Inductive voltage dividers$205.00
- GB/T 9092-1988Automatic switches for metering and load control$315.00
- GB/T 9092-1998Time switch for tariff and load control$265.00
- GB/T 9093-1988Stabilized supply apparatus for measurement$1,124.00
- GB/T 9094-1988Fluid power systems and components--Cylinders--Identification code for mounting dimensions and mounting types$890.00
- GB/T 9094-2006Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types$890.00
- GB/T 9094-2020Fluid power systems and components. Identification code for cylinders mounting dimensions and mounting types$890.00
- GB/T 9095-1988Measurement on the carburizing or nitro-caburizing harden case depth of sintering iron-based material$85.00
- GB/T 9095-2008Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth$85.00
- GB/T 9096-1988Sintered metals materials, excluding hardmetals--Impact test method$145.00
- GB/T 9096-2002Sintered metal materials, excluding hard metals - Impact test method$145.00
- GB/T 9096-2025Sintered metal materials, excluding hardmetals — Charpy impact test method$145.00
- GB/T 9097-2016Sintered metal materials, excluding hard metals -- Determination of apparent hardness and microhardness$185.00
- GB/T 9097.1-1988Sintered metal materials, excluding hardmetals--Determination of apparent hardness--Part 1: Materials of essentially uniform section hardness$85.00
- GB/T 9097.1-2002Sintered metal materials, excluding hard metals -- Determination of apparent hardness and microhardness$85.00
- GB/T 9098-1988Hermetic motor--Compressors for refrigerators$390.00
- GB/T 9098-1996Hermetic motor-compressors for refrigerators$390.00
- GB/T 9098-2008Hermetic motor-compressors for refrigerators$75.00
- GB/T 9098-2021Hermetic motor-compressors for refrigerators$390.00
- GB/T 9101-1988Nylon 66 dipped tyre cord fabric$105.00
- GB/T 9101-2002Nylon 66 dipped tyre cord fabric$205.00
- GB/T 9101-2017Polyamide 66 dipped tyre cord fabric$205.00
- GB/T 9101-2026Polyamide 66 dipped tyre cord fabric$255.00
- GB/T 9102-1988Nylon 6 dipped tyre cord fabric$145.00
- GB/T 9102-2003Nylon 6 dipped tyre cord fabric$235.00
- GB/T 9102-2016Nylon 6 dipped tyre cord fabric$235.00
- GB/T 9103-1988Industrial stearic acids$95.00
- GB/T 9103-2013Industrial stearic acids$95.00
- GB/T 9104-2008Test methods for industrial stearic acids$125.00
- GB/T 9104-2022Test methods for industrial stearic acids$240.00
- GB/T 9104.1-1988The test methods for industrial stearic acids--Determination of iodine value$79.00
- GB/T 9104.2-1988The test methods for industrial stearic acids--Determination of saponification value$79.00
- GB/T 9104.3-1988The test methods for industrial stearic acids--Determination of acid value$79.00
- GB/T 9104.4-1988The test methods for industrial stearic acids--Determination of colour$79.00
- GB/T 9104.5-1988The test methods for industrial stearic acids--Determination of titer$79.00
- GB/T 9104.6-1988The test methods for industrial stearic acids--Determination of water content$79.00
- GB/T 9104.7-1988The test methods for industrial stearic acids--Determination of inorganic acid$79.00
- GB/T 9104.8-1988The test methods for industrial stearic acids--Determination of ash$79.00
- GB/T 9104.9-1988The test methods for industrial stearic acids--Determination of components$79.00
- GB/T 9105-1988Glass blanks of photochromic spectacle lens$240.00
- GB/T 9105-2023Uncut finished spectacle lenses—Photochromic lenses$240.00
- GB/T 9106-2001Packaging containers -- Two-piece can -- Part 1: Aluminum easy open end and aluminum can$105.00
- GB/T 9106.1-2009Packaging containers - Aluminum easy open end and aluminum two-piece can$165.00
- GB/T 9106.1-2019Packaging containers—Two-piece can—Part 1: Aluminum easy open end and aluminum can$165.00
- GB/T 9106.2-2019Packaging containers—Two-piece can—Part 2: Aluminum easy open end and steel can$205.00
- GB/T 9107-1988Refined, cotton$515.00
- GB/T 9107-1999Refined cotton$515.00
- GB/T 9107-2023Refined cotton$515.00
- GB/T 9109.1-1988Dynamic measurement of crude oil--General principles$195.00
- GB/T 9109.1-2010Dynamic measurement of crude oil - General principles$195.00
- GB/T 9109.1-2016Dynamic measurement of petroleum and liquid petroleum products—Part 1: General principls$195.00
- GB/T 9109.2-1988Dynamic measurement of crude oil--The technical requirement of displacement meter installation$155.00
- GB/T 9109.2-2014Dynamic measurement of petroleum and liquid petroleum products—Part 2: Technical requirements of meter installation$155.00
- GB/T 9109.3-1988Dynamic measurement of crude oil--The technical stipulations of installation for fixed pipe provers$315.00
- GB/T 9109.3-2014Dynamic measurement of petroleum and liquid petroleum products—Part 3: Technical requirements of installation for pipe prover$315.00
- GB/T 9109.4-1988Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover$79.00
- GB/T 9109.5-1988Dynamic measurement of crude oil--Calculation of oil quantities$515.00
- GB/T 9109.5-2009Petroleum and liquid petroleum products - Calculation of oil quantities - Dynamic measurement$515.00
- GB/T 9109.5-2017Petroleum and liquid petroleum products dynamic measurement -- Part 5: Calculation of oil quantities$475.00
- GB/T 9109.5-2025Dynamic measurement of petroleum and liquid petroleum products — Part 5: Calculation of oil quantities$515.00
- GB/T 9110-1988Crude oil vertical metal tank measurement. Method of calculation of quantities$334.00
- GB/T 9111-1988Testing method of mulberry silkworm cocoon (dried cocoon)$415.00
- GB/T 9111-2006The methods of mulberry silkworm dried cocoons$415.00
- GB/T 9111-2015The methods of mulberry silkworm dried cocoons$415.00
- GB/T 9112-1988Types for steel pipe flanges$225.00
- GB/T 9112-2000Steel pipe flanges$225.00
- GB/T 9112-2010Types and parameters for steel pipe flanges$195.00
- GB/T 9113-2010Integral steel pipe flanges$205.00
- GB/T 9113.1-1988Integral steel pipe flanges with flat face for PN1. 6 MPa (16 bar)$165.00
- GB/T 9113.1-2000Integral steel pipe flanges$175.00
- GB/T 9113.2-1988Integral steel pipe flanges with flat face for PN 2. 0$165.00
- GB/T 9113.2-2000Integral steel pipe flanges with male and female face$285.00
- GB/T 9113.3-1988Integral steel pipe flanges with raised face for PN1. 6 MPa (16 bar)$285.00
- GB/T 9113.3-2000Integral steel pipe flanges with tongue and groove face$285.00
- GB/T 9113.4-1988Integral steel pipe flanges with raised face for PN2. 5 MPa (25 bar)$165.00
- GB/T 9113.4-2000Integral steel pipe flanges with ring-joint face$165.00
- GB/T 9114-2000Hubbed screwed steel pipe flanges with raised face$435.00
- GB/T 9114-2010Hubbed screwed steel pipe flanges$135.00
- GB/T 9114.1-1988Hubbed screwed steel pipe flanges$165.00
- GB/T 9115-2010Steel pipe welding neck flanges$165.00
- GB/T 9115.1-1988Steel pipe welding neck flanges with flat face for PN 0. 25MPa (2. 5 bar)$285.00
- GB/T 9115.1-2000Steel pipe welding neck flanges with flat face or raised face$285.00
- GB/T 9115.2-1988Steel pipe welding neck flanges with flat face for PN 0. 6MPa (6 bar)$165.00
- GB/T 9115.2-2000Steel pipe welding neck flanges with male and female face$165.00
- GB/T 9115.3-1988Steel pipe welding neck flanges with flat face for PN1. 0MPa (10 bar)$165.00
- GB/T 9115.3-2000Steel pipe welding neck flanges with tongue and groove face$165.00
- GB/T 9115.4-1988Steel pipe welding neck flanges with flatface for PN1. 0MPa (10 bar)$85.00
- GB/T 9115.4-2000Steel pipe welding neck flanges with ring-joint face$85.00
- GB/T 9116-2010Hubbed slip-on-welding steel pipe flanges$215.00
- GB/T 9116.1-1988Hubbed slip-on-welding steel pipe flanges with flat face for PN 1. 0MPa (10 bar)$195.00
- GB/T 9116.1-2000Hubbed slip-on-welding steel pipe flanges$195.00
- GB/T 9116.2-1988Hubbed slip-on-welding steel pipe flanges with flat face for PN 1. 6 MPa (16 bar)$115.00
- GB/T 9116.2-2000Hubbed slip-on-welding steel pipe flanges with male and female face$115.00
- GB/T 9116.3-1988Hubbed slip-on-welding steel pipe flanges with flat face for PN 2. 0MPa (20 bar)$115.00
- GB/T 9116.3-2000Hubbed slip-on-welding steel pipe flanges with tongue and groove face$115.00
- GB/T 9116.4-1988Hubbed slip-on-welding steel pipe flanges with raised face for PN 1. 0MPa (10 bar)$85.00
- GB/T 9116.4-2000Hubbed slip-on-welding steel pipe flanges with ring-joint face$85.00
- GB/T 9117-2010Hubbed socket welding steel pipe flanges$195.00
- GB/T 9117.1-1988Hubbed socked welding steel pipe flanges with flat face for PN 2. 0MPa (20 bar)$55.00
- GB/T 9117.1-2000Hubbed socket welding steel pipe flanges$55.00
- GB/T 9117.2-1988Hubbed socket welding steel pipe flanges with raised face for PN 2. 0MPa (20 bar)$55.00
- GB/T 9117.2-2000Hubbed socket welding steel pipe flanges with male and female face$55.00
- GB/T 9117.3-1988Hubbed socket welding steel pipe flanges with raised face for PN 5. 0MPa (50 bar)$55.00
- GB/T 9117.3-2000Hubbed socket welding steel pipe flanges with tongue and groove face$55.00
- GB/T 9117.4-1988Hubbed socket welding steel pipe flanges with raised face for PN 10. 0MPa (100 bar)$169.00
- GB/T 9117.4-2000Hubbed socket welding steel pipe flanges with ring-joint face$135.00
- GB/T 9118-2010Loose hubbed steel pipe flanges with welding neck collar$165.00
- GB/T 9118.1-1988Loose hubbed steel pipe flanges with welding neck collar with raised face for PN 2. 0MPa (20 bar)$105.00
- GB/T 9118.1-2000Loose hubbed steel pipe flanges with welding neck collar with raised face$105.00
- GB/T 9118.2-1988Loose hubbed steel pipe flanges with welding neck collar with raised face for PN 5. 0MPa (50 bar)$85.00
- GB/T 9118.2-2000Loose hubbed steel pipe flanges with welding neck collar with ring-joint face$85.00
- GB/T 9119-2000Slip-on-welding plate steel pipe flanges with flate face or raised face$105.00
- GB/T 9119-2010Slip-on-welding plate steel pipe flanges$105.00
- GB/T 9119.1-1988Slip-on-welding plate steel pipe flanges$165.00
- GB/T 9120-2010Loose plate steel pipe flanges with weld-neck collar and with weld ring neck$285.00
- GB/T 9120.1-1988Loose plate steel pipe flanges with welding neck collar with raised face for PN 2. 5MPa (25 bar)$205.00
- GB/T 9120.1-2000Loose plate steel pipe flanges with weld-neck collar and with weld ring neck$205.00
- GB/T 9120.2-1988Loose plate steel pipe flanges with welding neck collar with raised face for PN 4. 0MPa (40 bar)$165.00
- GB/T 9120.2-2000Loose plate steel pipe flanges with welding neck collar with male and female face$165.00
- GB/T 9120.3-1988Loose plate steel pipe flanges with welding neck collar with male and female face for PN2. 5MPa (25 bar)$165.00
- GB/T 9120.3-2000Loose plate steel pipe flanges with welding neck collar with tongue and groove face$165.00
- GB/T 9121-2010Loose plate steel pipe flanges with weld-on collar$165.00
- GB/T 9121.1-1988Loose plate steel pipe flanges with weld-on collar with raised face for PN 1. 6MPa (16 bar)$85.00
- GB/T 9121.1-2000Loose plate steel pipe flanges with weld-on collar with raised face$85.00
- GB/T 9121.2-1988Loose plate steel pipe flanges with weld-on collar with raised face for PN 1. 0MPa (10 bar)$55.00
- GB/T 9121.2-2000Loose plate steel pipe flanges with weld-on collar with male and female face$55.00
- GB/T 9121.3-1988Loose plate steel pipe flanges with weld-on collar with raised face for PN 1. 6MPa (16 bar)$55.00
- GB/T 9121.3-2000Loose plate steel pipe flanges with weld-on collar with tongue and groove face$55.00
- GB/T 9122-2000Loose plate steel pipe flanges with lapped end$85.00
- GB/T 9122-2010Loose plate steel pipe flanges with lapped pipe end and pressed collar pressed collar with long neck$165.00
- GB/T 9123-2010Steel pipe blank flanges$325.00
- GB/T 9123.1-1988Steel pipe blank flanges with flat face PN 0. 25MPa (2. 5 bar)$175.00
- GB/T 9123.1-2000Steel pipe blank flanges with flat face or raised face$175.00
- GB/T 9123.2-1988Steel pipe blank flanges with flat face for PN 0. 6MPa (6 bar)$85.00
- GB/T 9123.2-2000Steel pipe blank flanges with male and female face$85.00
- GB/T 9123.3-1988Steel pipe blank flanges with flat face for PN 1. 0MPa (10 bar)$85.00
- GB/T 9123.3-2000Steel pipe blank flanges with ring-joint face$85.00
- GB/T 9123.4-1988Steel pipe blank flanges with flat face for PN 1. 6MPa (16 bar)$55.00
- GB/T 9123.4-2000Concrete Test Hammer$55.00
- GB/T 9124-1988Butt-welding ends for steel pipe flanges$405.00
- GB/T 9124-2000Specification for steel pipe flanges$495.00
- GB/T 9124-2010Specification for steel pipe flanges$405.00
- GB/T 9124.1-2019Steel pipe flanges -- Part 1: PN designated$1,100.00
- GB/T 9124.2-2019Steel pipe flanges -- Part 2: Class designated$2,010.00
- GB/T 9125-1988Specification for steel pipe flanges$175.00
- GB/T 9125-2003Fasteners for pipe flange joints$175.00
- GB/T 9125-2010Fasteners for pipe flange joints$105.00
- GB/T 9125.1-2020Fasteners for steel pipe flange joints—Part 1:PN designated$850.00
- GB/T 9125.2-2020Fasteners for steel pipe flange joints—Part 2: Class designated$385.00
- GB/T 9126-2003Pipe flange with non-metallic flat gasket size$85.00
- GB/T 9126-2008Non-metallic flat gaskets for pipe flanges - Part 1: PN designated$135.00
- GB/T 9126.1-1988Asbestes rubber gaskets for steel pipe flanges with full face$169.00
- GB/T 9126.2-1988Asbestes rubber gaskets for steel pipe flanges with raised face$169.00
- GB/T 9127-1988Tussah silk fabrics$115.00
- GB/T 9127-2007Tussah silk fabrics$115.00
- GB/T 9127-2017Tuassah silk fabrics$115.00
- GB/T 9128-2003Metallic ring joint gaskets for steel pipe flanges - Part 1: PN designated$85.00
- GB/T 9128.1-1988Octagonal metallic ring gaskets for steel pipe flanges joints$165.00
- GB/T 9128.2-1988Oval metallic ring gaskets for steel pipe flange joint$165.00
- GB/T 9129-1988Specification for asbestes rubber gasket for steel pipe flanges$105.00
- GB/T 9129-2003Specifications of Non-metallic flat gaskets for pipe flanges$95.00
- GB/T 9130-1988Specification for metallic ring gasket for steel pipe flanges joint$79.00
- GB/T 9130-2007Specification of metallic ring-joint gaskets for steel pipe flanges$95.00
- GB/T 9138-1988Concrete Test Hammer$205.00
- GB/T 9138-2015Rebound test hammer$205.00
- GB/T 9139-2008Hydraulic excavators - Technical specifications$100.00
- GB/T 9139-2018Earth-moving machinery - Hydraulic excavators - Technical specifications$100.00
- GB/T 9139.1-1988Earth-moving machinery -- Hydraulic excavators -- Technical specifications$95.00
- GB/T 9139.2-1996Hydraulic excavators--Technical specifications$85.00
- GB/T 9140-1996Hydraulic excavators--Construction and performance$470.00
- GB/T 9141-1988Hydraulic excavators--Testing method of structure strength$435.00
- GB/T 9142-1988Concrete mixers--Specification$590.00
- GB/T 9142-2000Concrete mixers$590.00
- GB/T 9142-2021Building construction machinery and equipment - Concrete mixers$590.00
- GB/T 9143-1988Quality standard of coal for fixed-bed gas producer at atmospheric pressure$165.00
- GB/T 9143-2001Specification of coals for atmospheric fixed-bed gas producer [including MODIFICATION 1]$165.00
- GB/T 9143-2008Specifications of coal for atmospheric fixed-bed gasifier$165.00
- GB/T 9143-2021Commercial coal quality—Coal for fixed-bed gasification$165.00
- GB/T 9144-1988General purpose screw threads--Selected sizes for commercial screws, bolts and nuts$195.00
- GB/T 9144-2003General purpose metric screw threads - Preferable plan$195.00
- GB/T 9144-2025General purpose metric screw threads - Preferable plan$195.00
- GB/T 9145-1988General purpose screw threads--Limits of sizes for commercial bolt and nut threads--Medium quality$105.00
- GB/T 9145-2003General purpose metric screw threads -- Limits of sizes for the screw threads of medium quality and preferable plan$105.00
- GB/T 9146-1988General purpose screw threads--Limits of sizes for commercial bolt and nut threads--Coarse quality$89.00
- GB/T 9146-2003General purpose metric screw threads--Limits of sizes for the screw threads of coarse quality and preferable plan$89.00
- GB/T 9149-1988General specification for magnetic particle clutch$195.00
- GB/T 9149-2008General specification for magnetic particle clutch$195.00
- GB/T 9151-1988Terms of drilling engineering$1,565.00
- GB/T 9155-1988Hollow shaped steel door$79.00
- GB/T 9156-1988Solid shaped steel door$79.00
- GB/T 9158-1988Mechanical test methods windows$275.00
- GB/T 9158-2015Test methods of mechanics performance for windows and doors in building$275.00
- GB/T 9160.1-2006Rolling bearings - Accessories - Part 1: Tapered sleeves$505.00
- GB/T 9160.1-2017Rolling bearings - Accessories - Part 1: Adapter sleeve assemblies and withdrawal sleeves$505.00
- GB/T 9160.2-2005Rolling bearings-Accessories-Locknuts and locking devices$245.00
- GB/T 9160.2-2006Rolling bearings - Accessories - Part 2: Locknuts and locking devices$245.00
- GB/T 9160.2-2017Rolling bearings -- Accessories -- Part 2: Locknuts and locking devices$245.00
- GB/T 9161-1988Spherical plain bearing rod ends--Boundary dimensions$85.00
- GB/T 9161-2001Spherical plain bearings -- Spherical plain bearings rod ends$85.00
- GB/T 9162-1990Spherical plain thrust bearings-Boundary dimensions$15.00
- GB/T 9162-2001Spherical plain bearings -- Thrust spherical plain bearings$15.00
- GB/T 9163-1990Spherical plain radial bearings, joint type-Boundary dimensions$105.00
- GB/T 9163-2001Spherical plain bearings -- Radial spherical plain bearings$105.00
- GB/T 9164-1990Angular contact spherical plain bearings-Boundary dimensions$55.00
- GB/T 9164-2001Spherical plain bearings -- Angular contact radial spherical plain bearings$55.00
- GB/T 9165-1988Open front mechanical power presses--Testing of the accuracy$165.00
- GB/T 9166-1988Four-column hydraulic presses--Testing of the accuracy$135.00
- GB/T 9166-2009Four-column hydraulic press - Testing of the accuracy$135.00
- GB/T 9167-1988Spline hobbing machines--Testing of the accuracy$195.00
- GB/T 9167-2003Spline hobbing machines - Testing of the accuracy$455.00
- GB/T 9167-2025Spline hobbing machines - Testing of the accuracy$455.00
- GB/T 9168-1988Petroleum products--Determination of distillation at reduced pressures$545.00
- GB/T 9168-1997Petroleum products. Determination of distillation at reduced pressure$545.00
- GB/T 9168-2025Determination of distillation range of petroleum products — Vacuum distillation method$545.00
- GB/T 9169-1988Jet fuels--Determination of thermal oxidation stability--JFTOT method$345.00
- GB/T 9169-2010Standard test method for thermal oxidation stability of aviation turbine fuels - JFTOT procedure$345.00
- GB/T 9169-2023Standard test method for thermal oxidation stability of aviation turbine fuels$345.00
- GB/T 9170-1988Lubricating oils and fueloils. Determination of total nitrogen. Modified Kjeldahl method$194.00
- GB/T 9171-1988Engine oil. Determination of borderline pumping temperature$85.00
- GB/T 9172-1988Grades of basket-fired green tea for scenting$325.00
- GB/T 9174-1988General specification for transport packages of general cargo$75.00
- GB/T 9174-2008General specification for transport packages of general cargo$75.00
- GB/T 9176-2006Mulberry silkworm dried cocoons$105.00
- GB/T 9176-2016Mulberry silkworm dried cocoons$105.00
- GB/T 9177-1988General technical specification of uacuum packaging machine and uacuum-gas flushing packaging machine$125.00
- GB/T 9177-2004Vacuum packaging machine and vacuum-gas flushing packaging machine$125.00
- GB/T 9178-1988Terminology for integrated circuits$2,102.00
- GB/T 9185-1996Photography 135-Size film and magazine--Specification$375.00
- GB/T 9185-2003Photography. 135-size film and magazine - Specifications$375.00
- GB/T 9193-2005Audible and visual alarm signals and identification marks on ships$300.00
- GB/T 9193-2025Acoustic and optical alarm signals and identifying indications in ships$300.00
- GB/T 9195-1988Terms of products for architectural and sanitary ceramics$485.00
- GB/T 9195-1999Classification and terms of ceramic tiles and ceramic sanitary wares$485.00
- GB/T 9195-2011Classification and terms of building and sanitary ceramic$485.00
- GB/T 9195-2023Terms and classification of building and sanitary ceramics$485.00
- GB/T 9204-2008Dead centre$105.00
- GB/T 9204.1-1988Dead centre--Parameter$165.00
- GB/T 9204.2-1988Dead centre--Testing of the accuracy$10.00
- GB/T 9204.3-1988Dead centre--Specification$165.00
- GB/T 9205-1988Insterted blade gear hobs$145.00
- GB/T 9205-2005Insterted blade gear hobs$145.00
- GB/T 9206-1988Cylindrical hardmetal burrs$79.00
- GB/T 9207-1988Cylindrical round- (ball-) nose hardmetal burrs$79.00
- GB/T 9208-1988Spherical hardmetal burrs$79.00
- GB/T 9209-1988Oval hardmetal burrs$79.00
- GB/T 9210-1988Arch round- (ball) nose hardmetal burrs$79.00
- GB/T 9211-1988Arch pointed-nose hardmetal burrs$79.00
- GB/T 9212-1988Flame hardmetal burrs$79.00
- GB/T 9213-198860 Degree and 90 Degree cone hardmetal burrs$79.00
- GB/T 9214-1988Conical round- (ball-) nose hardmetal burrs$79.00
- GB/T 9215-1988Conical pointed-nose hardmetal burrs$79.00
- GB/T 9216-1988Inverted cone hardmetal burrs$79.00
- GB/T 9217-1988Hardmetal burrs--Technical specifications$79.00
- GB/T 9217.1-2005Hardmetal burrs -- Part 1: General specifications$135.00
- GB/T 9217.10-2005Hardmetal burrs -- Part 10: Conical round-(ball-) nose burrs (style L)$79.00
- GB/T 9217.11-2005Hardmetal burrs -- Part 11: Conical pointed-nose burrs (style M)$79.00
- GB/T 9217.12-2005Hardmetal burrs -- Part 12: Inverted cone burrs (style N)$79.00
- GB/T 9217.2-2005Hardmetal burrs -- Part 2: Cylindrical burrs (style A)$79.00
- GB/T 9217.3-2005Hardmetal burrs -- Part 3: Cylindrical round-(ball-)nose burrs (style C)$79.00
- GB/T 9217.4-2005Hardmetal burrs -- Part 4: Spherical burrs (style D)$79.00
- GB/T 9217.5-2005Hardmetal burrs -- Part 5: Oval burrs (style E)$79.00
- GB/T 9217.6-2005Hardmetal burrs -- Part 6: Arch round-(ball-)nose burrs (style F)$79.00
- GB/T 9217.7-2005Hardmetal burrs -- Part 7: Arch pointed-nose burrs (style G)$79.00
- GB/T 9217.8-2005Hardmetal burrs -- Part 8: Flame burrs (style H)$65.00
- GB/T 9217.9-2005Hardmetal burrs -- Part 9: 60-degreeand 90-degreecone burrs (styles J and K)$79.00
- GB/T 9218-1988Reels for 35mm motion picture projectors--Dimensions$109.00
- GB/T 9218-2005Reels for 35mm motion picture projectors -- Dimensions$109.00
- GB/T 9221-1988Preservatively-treated sleeper$79.00
- GB/T 9222-1988Strength calculation of pressure parts for watertube boilers$485.00
- GB/T 9222-2008Strength calculation of pressure parts for water tube boilers$535.00
- GB/T 9224-1988D. C. periodmeters-characteristics and test methods$255.00
- GB/T 9224-1998D.C.Periodmeters$255.00
- GB/T 9224-2025DC periodmeters$255.00
- GB/T 9225-1988General principles of reliability analysis of nuclear reactor protection systems$1,250.00
- GB/T 9225-1999General principles of reliability analysis for nuclear power plant safety systems$1,250.00
- GB/T 9225-2022Application guidelines of reliability analysis in nuclear power generating station systems and other nuclear facilities$1,250.00
- GB/T 9226-1988Certification of standardized radioactive sources$25.00
- GB/T 9229-1988Radioactive materials. Packagings. Tests for contents leakage and radiation leakage$55.00
- GB/T 9230-1995Direct-reading electroscope-typeradiation dosimetric meters Part 2: Chargers$169.00
- GB/T 9234-1988Technical condition for power reciprocating pump$295.00
- GB/T 9234-1997Power reciprocating pump$295.00
- GB/T 9234-2008Power reciprocating pump$295.00
- GB/T 9234-2018Power reciprocating pump$295.00
- GB/T 9237-1988General technical code for refrigerating plants$1,535.00
- GB/T 9237-2017[Including 2019XG1, 2020XG2] Refrigerating systems and heat pumps -- Safety and environmental requirements$1,535.00
- GB/T 9238-1998Symbols for balancing machines and associated instrumentation$435.00
- GB/T 9238-2010Symbols for balancing machines and associated instrumentation$435.00
- GB/T 9239-1988Balance quality of rigid rotors--Determination of permissible residual unbalance$285.00
- GB/T 9239.1-2006Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances$105.00
- GB/T 9239.1-2026Mechanical vibration—Rotor balancing—Part 1:Introduction$420.00
- GB/T 9239.11-2025Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour$420.00
- GB/T 9239.12-2021Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour$480.00
- GB/T 9239.13-2023Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors$330.00
- GB/T 9239.14-2017Mechanical vibration -- Rotor balancing -- Part 14: Procedures for assessing balance errors$195.00
- GB/T 9239.2-2006Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 2: Balance errors$470.00
- GB/T 9239.2-2025Mechanical vibration - Rotor balancing - Part 2: Vocabulary$470.00
- GB/T 9239.21-2019Mechanical vibration -- Rotor balancing -- Part 21: Description and evaluation of balancing machines$470.00
- GB/T 9239.23-2022Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines$345.00
- GB/T 9239.31-2023Mechanical vibration - Rotor balancing - Part 31: Susceptibility and sensitivity of machines to unbalance$345.00
- GB/T 9239.32-2017Mechanical vibration -- Rotor balancing -- Part 32: Shaft and fitment key convention$195.00
- GB/T 9246-1996Microscopes--Oculars (eyepieces)$300.00
- GB/T 9246-2008Microscopes - Oculars(eyepieces)$135.00
- GB/T 9246-2026Microscopes - Oculars (eyepieces)$300.00
- GB/T 9247-1996Microscope--Condensers$135.00
- GB/T 9247-2008Microscopes - Condensers$135.00
- GB/T 9248-1988Methods of evaluating the performance of flowmeters for incompressidle fluids$225.00
- GB/T 9248-2008Methods of evaluating the performance of flowmeters for incompressible fluids$225.00
- GB/T 9249-1988Self-balance recorders and indicators for use in industerial-process measurement and control systems$145.00
- GB/T 9249-2008Self-balance recorders and indicators for use in industrial-process measurement and conrol systems$145.00
- GB/T 9251-1988Method for hydraulic test of gas cylinders$240.00
- GB/T 9251-1997Method for hydraulic test of gas cylinders$240.00
- GB/T 9251-2011Methods for hydrostatic test of gas cylinders$240.00
- GB/T 9251-2022Methods for hydrostatic test of gas cylinders$240.00
- GB/T 9252-1988Method for cycling test of gas cylinders$125.00
- GB/T 9252-2001Method for cycling test of gas cylinders$125.00
- GB/T 9252-2017Method for pressure cycling test of gas cylinders$125.00
- GB/T 9253-2022Petroleum and natural gas industries—Threading, gauging and thread inspection of casing, tubing, and line pipe threads$1,775.00
- GB/T 9253.1-1988Threads on rotary shouldered connections for petroleum industry$169.00
- GB/T 9253.1-1999Threads on rotary shouldered connections for petroleum industry$169.00
- GB/T 9253.2-1988Oil casing thread$169.00
- GB/T 9253.2-1999Petroleum and natural gas industries. Threading, gauging, and thread inspection of casing, tubing and line pipe threads$169.00
- GB/T 9253.2-2017Petroleum and natural gas industries - Threading, gauging and thread inspection of casing, tubing, and line pipe threads$1,850.00
- GB/T 9253.8-1995Drill pipe threads$245.00
- GB/T 9253.9-1995Drill pipe thread gauges$115.00
- GB/T 9254-2008Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement$135.00
- GB/T 9254.1-2021Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements$1,130.00
- GB/T 9254.2-2021Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 2: Immunity requirements$1,000.00
- GB/T 9258.1-2000Coated abrasives. Grain size analysis. Part 1: Grain size distribution test$105.00
- GB/T 9258.2-2000Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220$195.00
- GB/T 9258.2-2008Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220$195.00
- GB/T 9258.2-2025Coated abrasives - Determination and designation of grain size distribution - Part 2: Macrogrit sizes P12 to P220$195.00
- GB/T 9258.3-2000Coated abrasives. Grain size analysis. Part 3: Determination of grain size distribution of microgrits P240 to P2500$300.00
- GB/T 9258.3-2017Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2 500$300.00
- GB/T 9258.3-2025Coated abrasives - Determination and designation of grain size distribution - Part 3: Microgrit sizes P240 to P5000$300.00
- GB/T 9259-1988Terminology of emission spectochemical analysis$1,320.00
- GB/T 9260-1988General specification for boottopping paint on ships$105.00
- GB/T 9260-2008Boottopping paint for ship$105.00
- GB/T 9261-1988General specification for deck paint$90.00
- GB/T 9261-2008Deck paint$90.00
- GB/T 9262-1988General specification for hold paint$95.00
- GB/T 9262-2008Cargo hold paint for ship$95.00
- GB/T 9263-1988Determination of slip resistance of antislip deck paint$85.00
- GB/T 9263-2020Determination of slip resistance of anti-skid coatings$85.00
- GB/T 9264-1988Determination of sagging of paint$175.00
- GB/T 9264-2012Paints and varnishes - Evaluation of sag resistance$175.00
- GB/T 9265-1988Determination for alkali resistance of film of architectural paints and coatings$75.00
- GB/T 9265-2009Determination for alkali resistance of film of - Architectural paints and coatings$75.00
- GB/T 9266-1988Determination of scrub resistance of film of architectural paints and coatings$55.00
- GB/T 9266-2009Determination of scrub resistance of film of architectural paints and coatings$55.00
- GB/T 9267-1988Determination of minimium film-forming temperature of emulsion for latex paints$85.00
- GB/T 9267-2008Emulsions for coatings and polymer dispersions for coatings and plastics -- Determination of white point temperature and minimum film-forming temperature$85.00
- GB/T 9268-1988Determination of freeze-thaw resistance of latex and emulsion paints$70.00
- GB/T 9268-2008Determination of freeze-thaw resistance of latex and emulsion paints$70.00
- GB/T 9269-1988Determination of viscosity of architectural paints and coatings--Stormer viscosimeter method$225.00
- GB/T 9269-2009Determination of viscosity of paints and coatings - Stormer viscosimeter method$225.00
- GB/T 9270-1988Determination of contrast ratio of light coloured paints (using polyester film)$79.00
- GB/T 9271-1988Paints and varnishes--Standard panels for testing$195.00
- GB/T 9271-2008Paints and varnishes standard panels for testing$195.00
- GB/T 9272-1988Determination of volume of dry coating (non-volatile matter) in a given volume of liquid coating$185.00
- GB/T 9272-2007Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating$185.00
- GB/T 9273-1988Print-free test of film$124.00
- GB/T 9274-1988Paints and varnishes - Determination of resistance to liquids$85.00
- GB/T 9275-1988Paints and varnishes--Buchholz indentation test$115.00
All GB/T ranges
- GB/T 1.1-1993 – GB/T 245-2016
- GB/T 246-1982 – GB/T 601-2002
- GB/T 601-2016 – GB/T 915-1995
- GB/T 915-2010 – GB/T 1303-1977
- GB/T 1303.1-1998 – GB/T 1617-1989
- GB/T 1617-2002 – GB/T 1927.9-2021
- GB/T 1928-1991 – GB/T 2399-2003
- GB/T 2399-2014 – GB/T 2590.6-1981
- GB/T 2590.7-1981 – GB/T 2900.17-1994
- GB/T 2900.17-2009 – GB/T 3048.4-1994
- GB/T 3048.4-2007 – GB/T 3280-1992
- GB/T 3280-2007 – GB/T 3533.2-1984
- GB/T 3533.2-2017 – GB/T 3789.14-1991
- GB/T 3789.15-1991 – GB/T 3903.6-2017
- GB/T 3903.6-2024 – GB/T 4148-1993
- GB/T 4148-2003 – GB/T 4334-2008
- GB/T 4334-2020 – GB/T 4649-2008
- GB/T 4649-2018 – GB/T 4752-1984
- GB/T 4752-2002 – GB/T 4955-1997
- GB/T 4955-2005 – GB/T 5033-1985
- GB/T 5034-1985 – GB/T 5169.8-1985
- GB/T 5169.9-1993 – GB/T 5340.3-2006
- GB/T 5341-1985 – GB/T 5585.1-2005
- GB/T 5585.1-2018 – GB/T 5824-2008
- GB/T 5824-2021 – GB/T 6102.2-1985
- GB/T 6102.2-2009 – GB/T 6323.4-1994
- GB/T 6323.5-1994 – GB/T 6553-2014
- GB/T 6553-2024 – GB/T 6742-2007
- GB/T 6743-1986 – GB/T 6988.6-1993
- GB/T 6989-1986 – GB/T 7284-1998
- GB/T 7284-2016 – GB/T 7596-2000
- GB/T 7596-2008 – GB/T 7739.6-2021
- GB/T 7739.7-2007 – GB/T 8059.2-1987
- GB/T 8059.2-1995 – GB/T 8303-1987
- GB/T 8303-2002 – GB/T 8638.1-1988
- GB/T 8638.10-1988 – GB/T 8995-2026
- GB/T 8996-1988 – GB/T 9275-1988
- GB/T 9275-2008 – GB/T 9652.1-1997
- GB/T 9652.1-2007 – GB/T 9938-2013
- GB/T 9941-1988 – GB/T 10178-1988
- GB/T 10178-2006 – GB/T 10512-1989
- GB/T 10512-2008 – GB/T 10870-1989
- GB/T 10870-2001 – GB/T 11168-2009
- GB/T 11170-1989 – GB/T 11464-2013
- GB/T 11465-1989 – GB/T 11896-1989
- GB/T 11897-1989 – GB/T 12196-1990
- GB/T 12197-1990 – GB/T 12510-2015
- GB/T 12511-1990 – GB/T 12690.6-2017
- GB/T 12690.7-1990 – GB/T 12959-2008
- GB/T 12959-2024 – GB/T 13210-2024
- GB/T 13211-1991 – GB/T 13459-1992
- GB/T 13459-2008 – GB/T 13663.2-2018
- GB/T 13663.3-2018 – GB/T 13869-2008
- GB/T 13869-2017 – GB/T 14074.2-1993
- GB/T 14074.3-1993 – GB/T 14328.4-1993
- GB/T 14329-2008 – GB/T 14506.15-1993
- GB/T 14506.15-2010 – GB/T 14684-2011
- GB/T 14684-2022 – GB/T 14926.21-1994
- GB/T 14926.21-2001 – GB/T 15079.3-1994
- GB/T 15079.4-1994 – GB/T 15328-1994
- GB/T 15328-2009 – GB/T 15590-1995
- GB/T 15590-2008 – GB/T 15806-1995
- GB/T 15806-2006 – GB/T 16085-1995
- GB/T 16086-1995 – GB/T 16478.4-1996
- GB/T 16478.5-1996 – GB/T 16674.2-2016
- GB/T 16674.3-2023 – GB/T 16895.1-2008
- GB/T 16895.10-2001 – GB/T 17149.4-1997
- GB/T 17149.5-1997 – GB/T 17367-1998
- GB/T 17368-1998 – GB/T 17607-1998
- GB/T 17608-1998 – GB/T 17783-1999
- GB/T 17783-2019 – GB/T 17980.143-2004
- GB/T 17980.144-2004 – GB/T 18122-2000
- GB/T 18123-2000 – GB/T 18311.2-2026
- GB/T 18311.20-2007 – GB/T 18508-2001
- GB/T 18508-2014 – GB/T 18779.3-2023
- GB/T 18779.4-2020 – GB/T 18932.11-2002
- GB/T 18932.12-2002 – GB/T 19208-2003
- GB/T 19208-2008 – GB/T 19449.4-2013
- GB/T 19450-2004 – GB/T 19699-2023
- GB/T 19700-2005 – GB/T 19952-2005
- GB/T 19953-2005 – GB/T 20168-2006
- GB/T 20168-2017 – GB/T 20443-2006
- GB/T 20444-2006 – GB/T 20736-2006
- GB/T 20736-2025 – GB/T 20975.15-2008
- GB/T 20975.15-2020 – GB/T 21283.5-2008
- GB/T 21283.6-2015 – GB/T 21623-2008
- GB/T 21624-2008 – GB/T 21930-2008
- GB/T 21931.1-2008 – GB/T 22260-2023
- GB/T 22261-2008 – GB/T 22527-2008
- GB/T 22528-2008 – GB/T 22838.2-2009
- GB/T 22838.3-2009 – GB/T 23274.7-2009
- GB/T 23274.8-2009 – GB/T 23576-2024
- GB/T 23577-2009 – GB/T 23901.1-2009
- GB/T 23901.1-2019 – GB/T 24301-2009
- GB/T 24302-2009 – GB/T 24639-2009
- GB/T 24640-2009 – GB/T 24975.3-2010
- GB/T 24975.4-2010 – GB/T 25271-2010
- GB/T 25272-2010 – GB/T 25707-2010
- GB/T 25707-2025 – GB/T 26052-2010
- GB/T 26052-2022 – GB/T 26412-2010
- GB/T 26413-2010 – GB/T 26803.1-2011
- GB/T 26803.2-2011 – GB/T 27534.2-2025
- GB/T 27534.3-2011 – GB/T 27919-2011
- GB/T 27920.1-2011 – GB/T 28410-2012
- GB/T 28410-2025 – GB/T 28819-2023
- GB/T 28821-2012 – GB/T 29229-2012
- GB/T 29230.1-2012 – GB/T 29618.1-2013
- GB/T 29618.1-2017 – GB/T 30095-2013
- GB/T 30096-2013 – GB/T 30420.1-2013
- GB/T 30420.2-2019 – GB/T 30845.2-2021
- GB/T 30846-2014 – GB/T 31230.3-2014
- GB/T 31230.4-2014 – GB/T 31586.2-2015
- GB/T 31587-2015 – GB/T 32065.8-2020
- GB/T 32065.9-2019 – GB/T 32413-2015
- GB/T 32414-2015 – GB/T 32800.5-2023
- GB/T 32800.6-2023 – GB/T 33162-2016
- GB/T 33163-2016 – GB/T 33525-2025
- GB/T 33526-2017 – GB/T 33887-2017
- GB/T 33888-2017 – GB/T 34308.2-2017
- GB/T 34308.3-2017 – GB/T 34690.7-2017
- GB/T 34690.8-2017 – GB/T 35111-2017
- GB/T 35112-2017 – GB/T 35521-2017
- GB/T 35522-2017 – GB/T 35966-2018
- GB/T 35967-2018 – GB/T 36410.4-2018
- GB/T 36410.5-2018 – GB/T 36818-2018
- GB/T 36819-2018 – GB/T 37270.2-2018
- GB/T 37270.3-2018 – GB/T 37721-2019
- GB/T 37722-2019 – GB/T 38136-2019
- GB/T 38137-2019 – GB/T 38593-2020
- GB/T 38594-2020 – GB/T 39039-2020
- GB/T 39040-2020 – GB/T 39493-2020
- GB/T 39494-2020 – GB/T 39914-2021
- GB/T 39915-2021 – GB/T 40392-2021
- GB/T 40393-2021 – GB/T 40837-2021
- GB/T 40838-2021 – GB/T 41329-2022
- GB/T 41330-2022 – GB/T 41805-2022
- GB/T 41806-2022 – GB/T 42272-2022
- GB/T 42273-2022 – GB/T 42890-2023
- GB/T 42891-2023 – GB/T 43448-2023
- GB/T 43449-2023 – GB/T 44014-2024
- GB/T 44020-2024 – GB/T 44596-2024
- GB/T 44597-2024 – GB/T 45169-2025
- GB/T 45170-2024 – GB/T 45677-2025
- GB/T 45678-2025 – GB/T 46128-2025
- GB/T 46129-2025 – GB/T 46594-2026
- GB/T 46595-2025 – GB/T 47055-2026
- GB/T 47056-2026 – GB/T 47534-2026
- GB/T 47535-2026 – GB/T 48000.3-2026
- GB/T 48000.4-2026 – GB/T 48446-2026
- GB/T 48447-2026 – GB/T 51013-2014
- GB/T 51015-2014 – GB/T 30685-2024
- GB/T 30819-2024 – GB/T 43746.3-2024
- GB/T 43753.1-2024 – GB/T 9914.2-2013