GB/T 9088-2008Organization method for electric tools (English PDF)

Foreword

Since the implementation of this standard replaces GB/T 9088-1988 "power tool model designation." This standard and GB/T 9088-1988 compared to the major technical modifications include.

In Table 1, the power tool to delete the name of the category and class railway, increase gardening; metal cutting reciprocating saw increases class, beveling machine, song Wire saw, miter - Combined Saw; increase in a sand mold type grinders, bench grinders, vertical disc grinder, disc grinder vertical reciprocating sander Or polishing machine, trackless irregular circular motion sanding machine or polishing machine; assembly class adds impact wrench; increasing insertion forest type circular saw, Thickness planing, radial arm saws, planer; farming class Remove electric grass trimmer, electric mower; road construction category increased diamond drilling, plug-in concrete vibrator Actuators, sleepers hammer, attached concrete vibrator, stone cutting machine, diamond drills with water supply; increase coal mining drill class; gardening grass increase Scissors, scissors type grass shears, pruning machines, pruning shears, lawn trimmers, lawn edge trimmers, lawn edge trimmers, lawn loose sand, lawn mower, Masking mowers, walk-controlled mower, rotary mower, sickle mower rod, flail mowers, hover mowers, hand-held Formula gardening blowers, handheld gardening blowing smoke dual-use machine, hand-held gardening sucking machine, drum mowers, lawn scarifiers; Other categories Increases strapping, rust remover, sternum saws.

Delete Chapter 3 of this standard included power tools and components, design units can be prepared in principle to this standard model to make recommendations to the Model management unit application. Change. 3.3 "The standard models are not included in the preparation, design units power tools and assembly can refer to the Standards " Due to changes in current affiliations and administrative relations, GB/T 9088-1988 Appendix A A. 1 was changed to "national standard power tools Associate Technical Committee shall be responsible for the management of the power tool model. "

Appendix A of this standard is an informative annex The standard proposed by China Electrical Equipment Industrial Association.

1 Scope

This standard specifies the handheld and portable electric tools (hereinafter referred to as tool) and its model designation of the principle components. Where power tools Model and its components, adjustment shall be specified in this standard A (informative) power tool model application procedures Appendix, by the design unit to the power tool A model management unit application, issued after the effective tenor.

2 Definitions