JB/T 5343-2013Electric self-tapping screwdrivers (English PDF)
电动自攻螺丝刀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5343-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 5343-2013 is the English-translated version of 电动自攻螺丝刀.
Electric self-tapping screwdrivers are the tools covered by JB/T 5343-2013, a recommended standard of the Chinese machinery industry. It fixes the basic parameters and the type of the screwdriver and gives the technical requirements, the test methods, the inspection rules, the signs and packaging, and the provisions on warranty and accessories.
Use under general environmental conditions is the field it addresses. The standard carries Chinese classification K64 and international classification 25.140.20, and the Ministry of Industry and Information Technology issued it.
It quotes GB 755, GB 1002, GB 2099.1, GB 3883.1, GB 3883.2, GB 4343.1, GB/T 4583, GB/T 5013.4, GB/T 5023.5, GB/T 9088, GB/T 11918, GB 17625.1 and GB 17625.2. It supersedes JB/T 5343-1999.
Found what you need?
Document preview — JB/T 5343-2013
National Standard of the People's Republic of China
- ICS
- 25.140.20
- Replacing
- JB/T 5343-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 5343-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 5343-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Electric self-tapping screwdrivers are the tools covered by JB/T 5343-2013, a recommended standard of the Chinese machinery industry. It fixes the basic parameters and the type of the screwdriver and gives the technical requirements, the test methods, the inspection rules, the signs and packaging, and the provisions on warranty and accessories. Use under general environmental conditions is the field it addresses. The standard carries Chinese classification K64 and international classification 25.140.20, and the Ministry of Industry and Information Technology issued it. It quotes GB 755, GB 1002, GB 2099.1, GB 3883.1, GB 3883.2, GB 4343.1, GB/T 4583, GB/T 5013.4, GB/T 5023.5, GB/T 9088, GB/T 11918, GB 17625.1 and GB 17625.2. It supersedes JB/T 5343-1999.
JB/T 5343-2013 falls under ICS 25.140.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB 1002-2008 — [GB/T 1002-2008] Single phase plugs and socket-outlets for household and similar purposes. Types, basic parameters and dimensions [Quasi-Official / Academic version - translated by Chinese Institute]
GB 2099.1-2008 — Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
GB 3883.1-2008 — Safety of hand-held motor-operated electric tools - Part 1: General requirements
GB 3883.2-2012 — Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches
GB 4343.1-2009 — Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
GB/T 4583-2007 — Measurement of noise emitted by electric tools - Engineering method
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.5-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 5: Flexible cables (cords)
GB/T 9088-2008 — Organization method for electric tools
GB/T 11918-2001 — Industrial plugs and sockets and couplers - Part 1: General requirements
GB 17625.1-2012 — Electromagnetic compatibility - Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
GB 17625.2-2007 — [GB/T 17625.2-2007] Electromagnetic compatibility (EMC) -- Limits -- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <=16 A per phase and not subject to conditional conn
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5343-1999 (earlier edition)
Standards on related subjects:
GB/T 4343.2-2020 — Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity
GB/T 3883.311-2019 — Safety of motor-operated hand-held, transportable and garden tools -- Part 311: Particular requirements for transportable cut-off machines
GB/T 3787-2017 — Technical safety code for management, operation, inspection and maintenance of hand-held motor-operated electric tools
JB/T 5353-2013 — Electric tools - Guidelines for insulation treatment
JB/T 5334-2013 — Electric pipe threader
JB/T 5333-2013 — Wet electric polishers
6 Classification and status
International classification (ICS): 25.140.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB 1002-2008Single Phase Plugs and Socket-outlets for Household and Similar Purposes - Types, Basic Parameters and Dimensions
- GB 2099.1-2008Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
- GB 3883.1-2008Safety of hand-held motor-operated electric tools -- Part 1: General requirements
- GB 3883.2-2012Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches
- GB 4343.1-2009Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
Similar standards
Editions of JB/T 5343
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5343-2013 | Electric self-tapping screwdrivers | current edition | Current |
| JB/T 5343-1999 | Electric self-tapping screwdrivers | previous edition | Superseded |
This page sells the current edition, JB/T 5343-2013. Earlier editions are listed for reference only.
How to Download JB/T 5343-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 1002-2008 — [GB/T 1002-2008] Single phase plugs and socket-outlets for household and similar purposes. Types, basic parameters and dimensions [Quasi-Official / Academic version - translated by Chinese Institute]
GB 17625.1-2012 — Electromagnetic compatibility - Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
GB 17625.2-2007 — [GB/T 17625.2-2007] Electromagnetic compatibility (EMC) -- Limits -- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <=16 A per phase and not subject to conditional conn
JB/T 5343-2013
$319.00