Valid

JB/T 9609-2013Magnetic drills (English PDF)

磁座钻

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 9609-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 9609-2013 is the English-translated version of 磁座钻.

JB/T 9609-2013 is a recommended standard of the Chinese machinery industry for magnetic drills. It fixes their types and basic parameters, the technical requirements they must satisfy, the test methods and the inspection rules, along with the further requirements that accompany them.

The tools it addresses are drills held on a metal surface by a direct-current magnetic base and used under ordinary environmental conditions. Among the standards it quotes are GB 1002-2008, GB 2099.1-2008, GB 3883.6-2012, GB 4343.1-2009, GB 13960.1-2008 and GB 19212.1-2008.

It replaces JB/T 9609-1999; its Chinese classification is K64 and its international classification 25.140.20.

Found what you need?

Document preview — JB/T 9609-2013

National Standard of the People's Republic of China

ICS
25.140.20
Replacing
JB/T 9609-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 9609-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 9609-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for magnetic drills. It fixes their types and basic parameters, the technical requirements they must satisfy, the test methods and the inspection rules, along with the further requirements that accompany them. The tools it addresses are drills held on a metal surface by a direct-current magnetic base and used under ordinary environmental conditions. Among the standards it quotes are GB 1002-2008, GB 2099.1-2008, GB 3883.6-2012, GB 4343.1-2009, GB 13960.1-2008 and GB 19212.1-2008. It replaces JB/T 9609-1999; its Chinese classification is K64 and its international classification 25.140.20.

JB/T 9609-2013 falls under ICS 25.140.20, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 1002-2008 — [GB/T 1002-2008] Single phase plugs and socket-outlets for household and similar purposes. Types, basic parameters and dimensions [Quasi-Official / Academic version - translated by Chinese Institute]

GB 1003-2008 — Three phases plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions

GB 2099.1-2008 — Plugs and socket-outlets for household and similar purposes - Part 1: General requirements

GB 3883.6-2012 — Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for drills and impact drills

GB 4343.1-2009 — Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

GB/T 4583-2007 — Measurement of noise emitted by electric tools - Engineering method

GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables

GB/T 5023.5-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 5: Flexible cables (cords)

GB/T 9088-2008 — Organization method for electric tools

GB/T 11918-2001 — Industrial plugs and sockets and couplers - Part 1: General requirements

GB 13960.1-2008 — Safety of transportable motor operated electric tools - Part 1: General requirements

GB 17625.1-2012 — Electromagnetic compatibility - Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)

GB 17625.2-2007 — [GB/T 17625.2-2007] Electromagnetic compatibility (EMC) -- Limits -- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <=16 A per phase and not subject to conditional conn

GB 19212.1-2008 — Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests

GB 19212.7-2012 — Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 7: Particular requirements and test for safety isolating transformers and power supply units incorporating saftey isolating transformers

ISO 7010-

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 9609-1999 (earlier edition)

Standards on related subjects:

GB/T 4343.2-2020 — Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity

GB/T 3883.311-2019 — Safety of motor-operated hand-held, transportable and garden tools -- Part 311: Particular requirements for transportable cut-off machines

GB/T 3787-2017 — Technical safety code for management, operation, inspection and maintenance of hand-held motor-operated electric tools

JB/T 9604-2013 — Internal wiring connectors for electric tools

JB/T 9603-2013 — Blades for electric planers

JB/T 9601-2013 — Balance Accuracy and Process Rule of Single-phase Series Motor Rotor for Electric Tools

6 Classification and status

International classification (ICS): 25.140.20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 7010-

Editions of JB/T 9609

EditionTitleRevisionStatus
JB/T 9609-2013Magnetic drillscurrent editionCurrent
JB/T 9609-1999Magnetic drillsprevious editionSuperseded

This page sells the current edition, JB/T 9609-2013. Earlier editions are listed for reference only.

How to Download JB/T 9609-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 9609-2013

$339.00