GB/T 22678-2008Electric saber saws (English PDF)

Foreword

The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee on Power Tools (CAS/T C68) centralized. This standard is drafted by: Yangzhou Power Tools Co., Ltd., Shanghai Electric Tool Research Institute. The main drafters of this standard. Wang Yue, Liu Jiang, Libang Association. Electric saws and knives

1 Scope

GB/T 22678-2008 is the Chinese national standard on electric saber saws, in the field of manufacturing engineering. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 31 December 2008 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 October 2009. Classification: ICS 25.140.20, CCS K64. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This standard specifies the basic parameters of electric saws, type, technical requirements, test methods and inspection rules and other requirements. This standard applies to general environmental conditions, wood, metal, plastic, rubber and similar materials, sheet and tube, straight line sawing The single-phase AC and DC series motor or hand-held power saws (hereinafter referred to as saber saws). This standard also applies to electronic speed saws and knives. This standard does not apply to jigsaw, Portable electric sawing machine and cordless reciprocating saw.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB 755-2008 rotating motor fixed and performance ( IEC 60034-1.2004, IDT)

GB 1002 Household and similar single-phase plugs and socket type, basic parameters and dimensions

GB 2099.1 plugs and sockets for household and similar purposes - Part 1. General Requirements ( GB 2099.1-2008,

IEC 60884-1. 2006, E3.1, MOD)

GB/T 2900.28-2007 Electrotechnical terminology - Power Tools The first part of the

GB 3883.1-2005 Safety hand-held power tools. General requirements (

IEC 60745-1.2003, Ed3.2, IDT) The second part of the

GB 3883.11-2005 Safety hand-held power tools. reciprocating saws (jig saw, saber saws) special requirements (

IEC 60745-2-11.2003, Ed.2, \u200b\u200bIDT)

GB 4343.1-2003 Electromagnetic compatibility appliances, electric tools and similar apparatus - Part 1. Emission (IEC /CISPR14-1.2000, IDT)

GB/T 4583-2007 Measurement of noise power tools - Engineering method ( ISO 3744.1994, NEQ)

GB/T 5013.4-2008 rated voltage of 450/750V and below rubber insulated cables Part 4. Cords and flexible cables ( IEC 60245-4.2004, IDT)

GB/T 5023.5-2008 rated voltage of 450/750V and below PVC insulated cables Part 5. Flexible cables (cords) ( IEC 60227-5.2003, IDT)

3 Parameters and type

3.1 Basic parameters The basic parameters of the saw blade shall comply with the requirements of Table 1.