GB/T 9102-2016Nylon 6 dipped tyre cord fabric (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 9102-2003 "nylon 6 tire dipping cord fabric". Compared with GB/T 9102-2003, in addition to editorial repair Change, the main technical changes in this standard are as follows.

--- This standard covers all contents of FZ/T 55001-2012 "Nylon 6 dipped tire curtain fabric" --- range from the original "apply to the cord fabric line density and the number of shares of 2100dtex/2,1870dtex/2,1400dtex/3, 1400dtex/2,930dtex/2 and other specifications woven nylon 6 cord fabric, other organizations specifications of the nylon 6 dipped cord cloth also Can refer to the use of "changed to" for manufacturing force tires, battery tires, motorcycle tires, oblique tires, engineering tires used nylon 6 dip Curtains. (See Chapter 1, Chapter 1 of the 2003 edition);

- Added normative reference documents (see Chapter 2);

In the product classification, 700 dtex, 930 dtex, 1170 dtex, 1400 dtex, 1870 dtex, 700 dtex x 2,1170 dtex x 2, 1870 dtex x 3, 2100 dtex x 3 varieties (see Chapter 4);

In the table 1 organization specifications, the original standard in the warp density, weft density, width of the central value for the specific value, modified to warp density, Weft density, width is replaced by M, and both supply and demand are negotiated (see Chapter 5, 5.2 of 2003);

Increased by 700 dtex, 930 dtex, 1170 dtex, 1400 dtex, 1870 dtex, 700 dtex x 2,1170 dtex x 2, 1870dtex × 3,2100dtex × 3 varieties of performance assessment indicators (see Chapter 6);

--- B products, adjust the coefficient of variation of the strong torsion, the elongation at fixed load, the elongation at break, the elongation at break, the dry heat Shrinkage, twist index (see Table 3, 2003 Table 2);

- - -.2003 edition of 6.1.1 "standard atmospheric conditions according to GB 6529-1986 in the test with the standard temperature standard three-level atmosphere, The temperature of the sample (20 ± 2) °C, relative humidity of 62% to 68% of the conditions under the humidity control and test. "To" balance " Piece. nylon 6 dipped cord fabric sample in the drying cylinder balance 20h ~ 24h "." Test standard atmospheric conditions. temperature (20 ± 2) ° C, relative humidity (65 ± 4)% "(see 7.1.1.1.1.7.1.2.2, 2003 6.1.1);

--- Tensile properties and moisture content of the project detection method The original standard in a specific test method modified to directly refer to the relevant national standards (See Chapter 7, Chapter 6 of the 2003 edition).

1 Scope

This standard specifies the terms and definitions of nylon 6 dipped cord fabric, product classification, product organization specifications, technical requirements, test Law, inspection rules and signs, packaging, transportation, storage requirements.

This standard applies to the manufacture of tire tires, battery tires, motorcycle tires, oblique tires, engineering tires used nylon 6 dipped cord fabric. other Can refer to use.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 2942 Determination of static adhesive strength of vulcanized rubber and fiber cords - Extraction method Textiles - Properties and test terms for textile and textile materials - Part 1. Fibers and yarns GB/T Textiles - Properties and test terms for textile and textile materials - Part 2. Fabrics GB/T Textiles - Properties and test terms for textile and textile materials - Part 3. General purpose GB/T Textiles - Chemical fibers - Part 1. Generic names GB/T Textiles - Chemical fibers - Part 3. Test terminology GB/T

GB/T 4666 Textiles - Determination of length and width of fabrics Determination of width of woven fabrics

GB/T 4667-1995 Determination of woven fabric density

GB/T 4668-1995 Test method for moisture resistance of chemical fiber GB/T 6503

GB/T 6682 Analytical laboratory water specifications and test methods Representation and Judgment of Numerical Correction Rule and Limit Value of

GB/T 8170 Test method for linear density of chemical fiber filament

GB/T 14343 Test method for tensile properties of chemical fiber filaments GB/T 14344

3 Terms and definitions

GB/T 3291.1, GB/T 3291.2, GB/T 3291.3, GB/T 4146.1 and GB/T 4146.3 and the following terms and The definitions apply to this document.