Valid

HG/T 4074-2008Rubber sealing membranes for gas holders (English PDF)

贮气柜用橡胶密封膜

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4074-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 23, 2008

Implementation date

October 1, 2008

Scope

HG/T 4074-2008 is the English-translated version of 贮气柜用橡胶密封膜.

HG/T 4074-2008 is the Chinese chemical industry standard for the rubber sealing membranes used in gas holders. It sets the requirements, the inspection rules and the test methods for the sealing membrane, with provisions for marking, packaging, transport and storage.

It covers membranes for gas holders of design pressure not above 6 kPa in metallurgy, petrochemicals, town gas schemes and sewage treatment, where the stored gas may be coke oven gas, converter gas, blast furnace gas, refinery off-gas, associated oilfield gas, mine gas, biogas or natural gas.

Sealing membranes built on an interwoven substrate are excluded. The tests follow GB/T 528-1998, GB/T 531-1999, GB/T 1682-1994, GB/T 3512-2001 and HG/T 2580-1994. Issued on 23 April 2008, it has applied since 1 October 2008.

Found what you need?

Document preview — HG/T 4074-2008

National Standard of the People's Republic of China

ICS
83.140.50

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 4074-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese chemical industry standard for the rubber sealing membranes used in gas holders. It sets the requirements, the inspection rules and the test methods for the sealing membrane, with provisions for marking, packaging, transport and storage. It covers membranes for gas holders of design pressure not above 6 kPa in metallurgy, petrochemicals, town gas schemes and sewage treatment, where the stored gas may be coke oven gas, converter gas, blast furnace gas, refinery off-gas, associated oilfield gas, mine gas, biogas or natural gas. Sealing membranes built on an interwoven substrate are excluded. The tests follow GB/T 528-1998, GB/T 531-1999, GB/T 1682-1994, GB/T 3512-2001 and HG/T 2580-1994.

HG/T 4074-2008 falls under ICS 83.140.50, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528-1998 — Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties [including MODIFICATION 1]

GB/T 531-1999 — Rubber--Determination of indentation hardness by means of pocket hardness meters

GB/T 1682-1994 — Rubber, vulcanized--Determination of low-temperature brittleness (single test piece method)

GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids

GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method

GB/T 7762-2003 — Rubber - Vulcanized or thermoplastic - Resistance to ozone cracking - Static strain test

GB/T 9101-2002 — Nylon 66 dipped tyre cord fabric

GB/T 9102-2003 — Nylon 6 dipped tyre cord fabric

HG/T 2580-1994 — Rubber or plastic coated fabrics tensile strength and elongation at break

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 3672.1-2025 — Tolerances for rubber products - Part 1: Dimensional tolerances

HG/T 4622-2014 — Rubber compounds for seals used for dimethyl ether

GB/T 5721-1993 — General rules of identification, packaging, transportation and storage for rubber sealing products

HG/T 6183-2023 — Ductile iron pipe interface anti-slip and anti-loosening rubber sealing ring

HG/T 6181-2023 — Rubber gaskets for engine oil pans

HG/T 4116-2023 — Rubber gaskets for drum washing machine viewing windows

6 Classification and status

International classification (ICS): 83.140.50

Chinese Standard Classification (CCS): G 43

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4074-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4074-2008

$135.00