HG/T 2580-2022Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (English PDF)
橡胶或塑料涂覆织物拉伸强度和拉断伸长率的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2580-2022 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2022
Implementation date
April 1, 2023
Scope
HG/T 2580-2022 is the English-translated version of 橡胶或塑料涂覆织物拉伸强度和拉断伸长率的测定.
HG/T 2580-2022 is the Chinese chemical industry standard covering rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break.
It was issued on 20 October 2022 and has been in force since 1 April 2023, replacing HG/T 2580-2008. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2022 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — HG/T 2580-2022
National Standard of the People's Republic of China
- Replacing
- HG/T 2580-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 2580-2022 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 October 2022 and has been in force since 1 April 2023.
It replaces the earlier edition HG/T 2580-2008, HG/T 2580-1994.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
HG/T 2580-2022 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,854 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
HG/T 2580-2008 (earlier edition)
HG/T 2580-1994 (earlier edition)
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 2582-2022 — Rubber- or plastics-coated fabrics - Determination of resistance to water penetration
HG/T 2581.1-2022 — Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear method
HG/T 2577-2014 — Rubber or plastics elevator belts
5 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB 46311-2025Protective clothing - Protective clothing against rain for occupational use
- QC/T 1225-2025Curtain side semi-trailer
- NB/T 11434.1-2023Paste filling in coal mine - Part 1: Technical requirements of goaf isolation in fully mechanized mining face
- GB 41731-2022Marine inflatable lifejacket
- GB/T 39834-2021Technical requirement of fully mechanized bag filling mining with paste
- GB/T 21482-2019Ships and marine technology - Pneumatic rubber fenders
Similar standards
Editions of HG/T 2580
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2580-2022 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break | current edition | Current |
| HG/T 2580-2008 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break | previous edition | Superseded |
This page sells the current edition, HG/T 2580-2022. Earlier editions are listed for reference only.
How to Download HG/T 2580-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2580-2022
$255.00