GB/T 9262-2008Cargo hold paint for ship (English PDF)

Foreword

This standard replaces GB/T 9262-1988 "General technical conditions hold paint." The main technical differences between standard compared with GB/T 9262-1988 as follows.

--- Name to Marine hold paint;

--- Increased the classification of products;

--- Increases in the container status and application of the requirements;

--- Changed the adhesion test method;

--- Improved salt spray resistance requirements;

--- Product testing into the factory inspection and type testing. The standard proposed by China Petroleum and Chemical Industry Association.

1 Scope

This standard specifies the requirements for marine cargo hold paint, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to dry cargo ships and tanks of steel parts with protective paint.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB 190 packaging and marking of dangerous goods

GB/T 191 Packaging - Pictorial signs (GB/T 191-2000, eqv ISO 780:1997)

GB/T 1728 film, putties drying time assay

GB/T 1731 Determination of film flexibility

GB/T 1732 Determination of impact resistance of film

GB/T 1766 Paints and varnish coating aging rating method

GB/T 1768 Paints and varnishes - Determination of abrasion resistance of rubber rotating wheel method (GB/T 1768-2006, ISO 7784-2. 1997, IDT)

GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (GB/T 1771-2007, ISO 7253:1996, IDT)

GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling (GB/T 3186-2006, ISO 15528:2000, IDT)

GB/T 5210-2006 Paints and varnishes - Pull - off adhesion test (ISO 4624:2002, IDT)

GB/T 6748 Marine rust

GB/T 9271 Paints and varnishes - Standard panels for (GB/T 9271-2008, ISO 1514:2004, MOD)

GB/T 9278 paint sample conditioning and testing temperature and humidity (GB/T 9278-2008, ISO 3270. 1984, Paints andvarnishesandtheirraw materials-Temperaturesandhumiditiesforconditioningandtesting, IDT)

GB/T 9750 product packaging and marking paint

GB/T 13491 General Paint Pack

HG/T 2458 coating product testing, transportation and storage General People's Republic of China Food Sanitation Law (1995)

Category 3 Marine hold paint type I and II, I type is a single-component paint, II type two-component paint.

4 Requirements

4.2 loading bulk grain foods, should be made of "People's Republic of China Food Sanitation Law" hold paint [1995] in the relevant regulations.

4.3 The product should comply with the requirements of Table 1.