GB/T 9260-2008Boottopping paint for ship (English PDF)

1 Scope

This standard specifies the waterline marine paint requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to the outer surface of the ship hull between the load water line and light load waterline waterline paint, does not apply to water having an antifouling effect

Line paint.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (excluding corrections) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 1727 General Film Preparation

GB/T 1728-1979 paint, putty film drying time assay

GB/T 1765-1979 Determination of resistance to humidity, salt spray, weather resistance (artificial acceleration) Preparation of the film

GB/T 1766 Paints and varnish coating aging rating method

GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (GB/T 1771-2007, ISO 7253.1996, IDT)

GB/T 1865-1997 Paints and varnishes - Artificial weathering and exposure to artificial radiation (xenon arc radiation filtered) (Eqv ISO 11341.1994)

GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling (GB/T 3186-2006, ISO 15528.2000, IDT)

GB/T 5210-2006 Paints and varnishes - Pull - off adhesion test (ISO 4624.2002, IDT)

GB/T 6748 Marine rust

GB/T 9271 Paints and varnishes - Standard panels for (GB/T 9271-2008, ISO 1514.2004, MOD)

GB/T 9274-1988 Paints and varnishes - determination of resistance to liquids (eqv ISO 2812. 1974)

GB/T 9276-1996 Test method for exposure to natural weathering coating (eqv ISO 2810)

GB/T 9278 paint sample conditioning and testing temperature and humidity (GB/T 9278-2008, ISO 3270. 1984, Paintsand varnishesandtheirrawmaterials-Temperaturesandhumiditiesforconditioningandtesting, IDT)

GB/T 9750 product packaging and marking paint

GB/T 10834 Determination ship paint salt water brine and hot salt water immersion method

GB/T 13491-1992 General Paint Pack

GB/T 14522-1993 machinery and industrial products for plastics, paints, rubber artificial climate accelerated test methods

GB/T 20624.1-2006 Paints and varnishes - Rapid - deformation (impact resistance) tests - Part 1. Falling-weight test (large red

Head) (ISO 6272-1.2002, IDT)

HG/T 2458-1993 coatings inspection, transport and storage General

3 Requirements

Products should meet the requirements of Table 1, supporting the primer should be consistent with GB/T 6748 "marine rust" requirements.