Search GB/T
500 GB/T standards in English, from GB/T 9941-1988 to GB/T 10178-1988, in code order.
- GB/T 9941-1988High speed tool steel sheets and plates--Technical requirements$125.00
- GB/T 9941-2009High speed tool steel sheets and plates$125.00
- GB/T 9942-1988High speed tool steel forged bars with large section--Technical requirements$79.00
- GB/T 9943-1988High speed tool steel bars--Technical requirements$330.00
- GB/T 9943-2008High-speed tool steels$330.00
- GB/T 9943-2025High-speed tool steels$330.00
- GB/T 9944-1988Stainless steel wire ropes$470.00
- GB/T 9944-2002Stainless steel wire ropes$470.00
- GB/T 9944-2015Stainless Steel Wire Ropes$105.00
- GB/T 9944-2025Stainless-steel wire ropes$470.00
- GB/T 9945-1988Bulb flat steel for shipbuilding$255.00
- GB/T 9945-2001Hot-rolled bulb flat steel$255.00
- GB/T 9945-2012Hot-rolled bulb flats$255.00
- GB/T 9945-2025Hot-rolled bulb flats$255.00
- GB/T 9946-1988Dimensions, shape, weight and tolerances for hot-rolled L-sectional steel$79.00
- GB/T 9948-2013Seamless steel tubes for petroleum cracking$470.00
- GB/T 9948-2025Seamless steel tubes and pipes for petrochemical and chemical facilities$470.00
- GB/T 9950-1988Data communication--37 pin and 9 pin DTE/DCE interface connectors and pin assignments$265.00
- GB/T 9950-2008Information technology - Data communication. 37-pole DTE/DCE interface connector and contact number assignments$265.00
- GB/T 9951-1988Data communication--34pin DTE/DCE interface connector and pin assignments$265.00
- GB/T 9951-2008Information technology - Telecommunication and information exchange between systems. 34 pin DTE/DCE interface connector mateability dimensions and contact number assignments$265.00
- GB/T 9952-1988Data communication--15 pin DTE/DCE interface connector and pin assignments$265.00
- GB/T 9952-2008Information technology - Data communication. 15-pole DTE/DCE interface connector and contact number assignment$265.00
- GB/T 9953-1999Immersion suits$90.00
- GB/T 9953-2026Immersion suits$255.00
- GB/T 9956-1988Standard for quality of black carp fry and fingerling$145.00
- GB/T 9956-2011Fry and fingerling of black carp$145.00
- GB/T 9959.1-1988Fresh and frozen pork, halves$55.00
- GB/T 9959.1-2019Fresh and frozen pork and pig by-products—Part 1: Demi-carcass pork$105.00
- GB/T 9959.2-1988Fresh and frozen pork, halves, skinless$165.00
- GB/T 9959.2-2008Fresh and frozen pork lean, cuts$165.00
- GB/T 9959.2-2026Fresh and frozen pork and pig by-products - Part 2: Pork lean cuts$165.00
- GB/T 9959.3-1988Frozen pork, parts$145.00
- GB/T 9959.3-2019Fresh and frozen pork and pig by-products—Part 3: Pork cuts$145.00
- GB/T 9959.4-1988Frozen pork muscle, cuts$145.00
- GB/T 9959.4-2019Fresh and frozen pork and pig by-products—Part 4: Pig by-products$145.00
- GB/T 9960-1988Fresh and frozen beef, quarters$125.00
- GB/T 9960-2008Fresh and frozen beef,quarters$125.00
- GB/T 9961-1988Fresh and frozen mutton, whole carcasses$165.00
- GB/T 9961-2008Fresh and frozen mutton carcass$165.00
- GB/T 9961-2026Fresh and frozen sheep meat$165.00
- GB/T 9963-1998Tempered glass$125.00
- GB/T 9966.1-1988Test methods for natural facing stones--Dry, wet and after freezing test methods for compressive strength$10.00
- GB/T 9966.1-2001Test methods for natural facing stones - Part 1: Dry, wet and after freezing test methods for compressive strength$90.00
- GB/T 9966.1-2020Test methods for natural stone—Part 1:Determination of dry,wet and after freezing compressive strength$90.00
- GB/T 9966.10-2021Test methods for natural stone—Part 10: Determination of resistance to shaking for individual stone anchoragest$70.00
- GB/T 9966.11-2021Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock$95.00
- GB/T 9966.12-2021Test methods for natural stone—Part 12:Determination of static elastic modulus$105.00
- GB/T 9966.13-2021Test methods for natural stone—Part 13: Determination of water absorption coefficient by capillarity$90.00
- GB/T 9966.14-2021Test methods for natural stone—Part 14: Determination of rupture energy$90.00
- GB/T 9966.15-2021Test methods for natural stone—Part 15: Determination of resistance ageing by salt mist$90.00
- GB/T 9966.16-2021Test methods for natural stone—Part 16: Determination of linear thermal expansion coefficient$90.00
- GB/T 9966.17-2021Test methods for natural stone—Part 17: Determination of resistance to salt crystallization$85.00
- GB/T 9966.18-2021Test methods for natural stone—Part 18: Petrographic examination$85.00
- GB/T 9966.2-1988Test methods for natural facing stones--Test method for flexural strength$165.00
- GB/T 9966.2-2001Test methods for natural facing stones - Part 2: Dry and wet test method for flexural strength$150.00
- GB/T 9966.2-2020Test methods for natural stone—Part 2:Determination of dry,wet and after freezing flexural strength$150.00
- GB/T 9966.3-1988Test methods for natural facing stones--Test methods for bulk density, true density, true porosity and water absorption$25.00
- GB/T 9966.3-2001Test methods for natural facing stones -- Part 3: Test methods for bulk density, true density, true porosity and water absorption$75.00
- GB/T 9966.3-2020Test methods for natural stone - Part 3:Determination of water absorption,bulk density,true density and true porosity$150.00
- GB/T 9966.4-1988Test methods for natural facing stones--Test method for abrasion resistance$165.00
- GB/T 9966.4-2001Test methods for natural facing stones - Part 4: Test method for abrasion resistance$150.00
- GB/T 9966.4-2020Test methods for natural stone—Part 4:Determination of abrasion resistance$150.00
- GB/T 9966.5-1988Test methods for natural facing stones--Test method for specular gloss$10.00
- GB/T 9966.5-2001Test methods for natural facing stones - Part 5: Test method for shore hardness$90.00
- GB/T 9966.5-2020Test methods for natural stone—Part 5:Determination of hardness$90.00
- GB/T 9966.6-1988Test methods for natural facing stones--Test method for acid resistance$10.00
- GB/T 9966.6-2001Test methods for natural facing stones - Part 6: Test method for acid resistance$90.00
- GB/T 9966.6-2020Test methods for natural stone—Part 6:Determination of acid resistance$90.00
- GB/T 9966.7-2001Test methods for natural facing stones - Part 7: Test method for strength of individual stoned anchorages$150.00
- GB/T 9966.7-2020Test methods for natural stone—Part 7:Determination of strength for individual stone anchorages$150.00
- GB/T 9966.8-2001Test methods for natural facing stones - Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference$145.00
- GB/T 9966.8-2008Test methods for natural facing stones - Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference$145.00
- GB/T 9966.8-2025Test methods for natural stone — Part 8: Determination of test for structural performance of dimension stone cladding systems by uniform static pressure difference$145.00
- GB/T 9966.9-2021Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency$105.00
- GB/T 9967-1988Neodymium metal$90.00
- GB/T 9967-2001Neodymium metal$90.00
- GB/T 9967-2010Neodymium metal$90.00
- GB/T 9967-2025Neodymium metal$90.00
- GB/T 9969-2008General principles for preparation of instructions for use of industrial products$85.00
- GB/T 9971-1988Pure iron for raw material$145.00
- GB/T 9971-2004Pure iron for raw material$145.00
- GB/T 9971-2017Pure iron raw material$145.00
- GB/T 9973-1988Test method for the permeability of carbon materials$225.00
- GB/T 9973-2006Test method for permeability of carbon materials$225.00
- GB/T 9973-2025Test methods for permeability of carbon materials$225.00
- GB/T 9977-1988The terms of coking products$255.00
- GB/T 9977-2008The terms of coking products$255.00
- GB/T 9978-1988Fire-resistance tests--Elements of building construction$85.00
- GB/T 9978-1999Fire-resistance tests--Elements of building construction$105.00
- GB/T 9978.1-2008Fire-resistance tests -- Elements of building construction -- Part 1: General requirements$125.00
- GB/T 9978.10-2026Fire resistance tests of building elements - Part 10: Specific requirements for structural systems$300.00
- GB/T 9978.2-2019Fire Resistance Tests -- Elements of building construction -- Part 2: Guidance on measuring uniformity of furnace exposure on test samples$195.00
- GB/T 9978.3-2008Fire-resistance tests of building elements - Part 3: Guide to application of test methods and results$285.00
- GB/T 9978.3-2026Fire-resistance tests of building elements - Part 3: Guide to application of test methods and results$360.00
- GB/T 9978.4-2008Fire-resistance tests -- Elements of building construction -- Part 4: Specific requirements for loadbearing vertical separating elements$225.00
- GB/T 9978.5-2008Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements$135.00
- GB/T 9978.6-2008Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams$185.00
- GB/T 9978.7-2008Fire-resistance tests -- Elements of building construction -- Part 7: Specific requirements for columns$165.00
- GB/T 9978.8-2008Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-loadbearing vertical separating elements$55.00
- GB/T 9978.9-2008Fire-resistance tests -- Elements of building construction -- Part 9: Specific requirements for non-loadbearing ceiling elements$225.00
- GB/T 9979-1988Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures$90.00
- GB/T 9979-2005Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures$90.00
- GB/T 9981-2012Hygienic specifications of rural residence$165.00
- GB/T 9981-2025Hygienic specification for rural residential buildings$165.00
- GB/T 9983-1988Industrial sodium tripolyphosphate$90.00
- GB/T 9983-2004Industrial sodium tripolyphosphate$85.00
- GB/T 9983-2026Industrial sodium tripolyphosphate$90.00
- GB/T 9984-2008Test methods for industrial sodium tripolyphosphate$405.00
- GB/T 9984-2026Test methods for industrial sodium tripolyphosphate$255.00
- GB/T 9984.1-1988The measurement of whiteness for industrial sodium tripolyphosphate (including foodstuffs)$205.00
- GB/T 9984.1-2004Test methods for industrial sodium tripolyphosphate$205.00
- GB/T 9984.10-1988Sodium tripolyphosphate for industrial use (including foodstuffs)--Determination of oxides of nitrogen content--3, 4-Xylenol spectrophotometric method$79.00
- GB/T 9984.10-2004Sodium tripolyphosphate for industrial use (including foodstuffs) - Determination of oxides of nitrogen content-3, 4-Xylenol spectrophotometric method$135.00
- GB/T 9984.11-1988Sodium tripolyphosphate for industrial use--Determination of I type content$79.00
- GB/T 9984.11-2004Sodium tripolyphosphate for industrial use - Determination of I type content$205.00
- GB/T 9984.2-1988Sodium tripolyphosphate for industrial use--Determination of total phosphorus pentoxide content--Quinoline phosphomolybdate qravimetric method$79.00
- GB/T 9984.2-2004Sodium tripolyphosphate for industrial use - Determination of total phosphorus (v) oxide content - Quinoline phosphomolybdate gravimetric method$55.00
- GB/T 9984.3-1988Sodium tripolyphosphate for industrial use--Separation by ion exchange chromatography and determination of the different phosphate forme$79.00
- GB/T 9984.3-2004Sodium tripolyphosphate for industrial use - Separation by ion exchange chromatography and determination of the different phosphate forms$285.00
- GB/T 9984.4-1988Sodium tripolyphosphate for industrial use--Determination of insoluble matter in water$79.00
- GB/T 9984.4-2004Sodium tripolyphosphate for industrial use - Determination of matter insoluble in water$165.00
- GB/T 9984.5-1988Sodium tripolyphosphate and sodium pyrophosphate for industrial use--Determination of loss ignition$79.00
- GB/T 9984.5-2004Sodium tripolyphosphate and Sodium pyrophosphate for industrial use - Determination of loss on ignition$165.00
- GB/T 9984.6-1988Determination of iron content in industrial sodium tripoly-phosphate--2, 2-bipyridyl spectrophotometric method$79.00
- GB/T 9984.6-2004Sodium tripolyphosphate for industrial use - Determination of iron content--2, 2-bipyridyl spectrophotometric method$165.00
- GB/T 9984.7-1988Sodium tripolyphosphate for industrial use--Masurement of pH potentiometric method$79.00
- GB/T 9984.7-2004Sodium tripolyphosphate for industrial use - Measurement of pH - Potentiometric method$165.00
- GB/T 9984.8-1988Determination of particle size for industrial use--Sodium tripotyphosphate$79.00
- GB/T 9984.8-2004Sodium tripolyphosphate for industrial use - Determination of particle size$165.00
- GB/T 9984.9-1988Industrial sodium tripolyphosphate determination of apparent density--Method by measuring the mass of a given volume$79.00
- GB/T 9984.9-2004Industrial sodium tripolyphosphate - Determination of apparent density - Method by measuring the mass of a given volume$245.00
- GB/T 9985-2000Detergents for hand dishwashing$150.00
- GB/T 9985-2022Detergents for hand dishwashing$150.00
- GB/T 9987-1988Terms of glass container manufacture$1,640.00
- GB/T 9987-2011Glass contains -- Manufacture -- Vocabulary$1,640.00
- GB/T 9988-1988Test method for alkali resistance of porcelain enamels$70.00
- GB/T 9988-2025Test method for alkali resistance of porcelain enamels$255.00
- GB/T 9989-1988Vitreous and porcelain enamels--Determination of resistance to citric acid at room temperature$70.00
- GB/T 9989-2005Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature$70.00
- GB/T 9989.1-2015Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature$145.00
- GB/T 9989.2-2015Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours$235.00
- GB/T 9989.2-2025Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours$300.00
- GB/T 9989.3-2015Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel$205.00
- GB/T 9989.3-2025Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle$360.00
- GB/T 9989.4-2015Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel$205.00
- GB/T 9989.5-2015Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 5: Determination of resistance to chemical corrosion in closed systems$205.00
- GB/T 9994-2008Conventional moisture regains of textiles$115.00
- GB/T 9994-2018Conventional moisture regains of textile materials$115.00
- GB/T 9995-1988Determination of moisture content and moisture regain of textile--Oven-drying method$85.00
- GB/T 9995-1997Determination of moisture content and moisture regain of textile. Oven-drying method$85.00
- GB/T 9996-1988Determination of appearance quality of yarns made of cotton or man-made fibres, or their blends by winding on the black board$85.00
- GB/T 9996-2001Inspection of appearance quality of yarns made of cotton, man-made fibres and their blends wound on blackboard - Part 1: Comprehensive assessment$85.00
- GB/T 9996.1-2008Inspection of appearance quality of yarns made of cotton, man-made fibres and their blends wound on blackboard - Part 1: Comprehensive assessment$210.00
- GB/T 9996.1-2026Inspection of the appearance quality of cotton, man-made fibre and blended yarns wound on a blackboard — Part 1: Comprehensive assessment$195.00
- GB/T 9996.2-2008Determination of appearance quality of yarns made of cotton or man-made fibers,or their blends by winding on the black board - Part 2: individual assessment$265.00
- GB/T 9996.2-2026Inspection of the appearance quality of cotton, man-made fibre and blended yarns wound on a blackboard — Part 2: Individual assessment$255.00
- GB/T 9997-1988Man-made fibres--Determination of breaking strength and elongation of individual fibres$249.00
- GB/T 9998-1988Xining wool$125.00
- GB/T 9998-2006Xining wool$125.00
- GB/T 9999-1988China standard serial numbering (CSSN)$105.00
- GB/T 9999-2001China standard serial number -- Part 1: China serial number$105.00
- GB/T 9999.1-2018China standard serial number—Part 1: China serial number$295.00
- GB/T 9999.2-2018China standard serial number -- Part 2: ISSN$295.00
- GB/T 9999.2-2026China standard serial number - Part 2: ISSN$420.00
- GB/T 10000-1988[GB 10000-88] Human dimensions of Chinese adults$465.00
- GB/T 10000-2023Human dimensions of Chinese adults$465.00
- GB/T 10001.1-2000Public information graphical symbols for use on sign--Part 1: Common symbols$600.00
- GB/T 10001.1-2006Signs with graphic symbols for public information - Part 1: Common symbols$600.00
- GB/T 10001.1-2012Public information graphical symbols - Part 1: General symbols$135.00
- GB/T 10001.10-2007Logo Public information graphical symbols - Part 10: Railway passenger service symbol$549.00
- GB/T 10001.10-2014Public information graphical symbols for use on sign - Part 10: General symbols$235.00
- GB/T 10001.2-2002Public information graphical symbols for use on sign - Part 2: Symbols for touring facilities and services$390.00
- GB/T 10001.2-2006Public information graphical symbols for use on sign - Part 2: Symbols for tourism and entertainment$390.00
- GB/T 10001.2-2021Public information graphical symbols - Part 2: Symbols for tourism and entertainment$390.00
- GB/T 10001.3-2004Logo Public information graphical symbols - Part 3: Passenger and freight$420.00
- GB/T 10001.3-2011Public information graphical symbols for use on sign - Part 3: Symbols for passenger and cargo transport$420.00
- GB/T 10001.3-2021Public information graphical symbols - Part 3: Symbols for passenger and cargo transport$420.00
- GB/T 10001.4-2003Signs with graphic symbols for public information - Part 4: sports symbols$330.00
- GB/T 10001.4-2007Signs with graphic symbols for public information - Part 4: Symbols for recreation sport$330.00
- GB/T 10001.4-2009Public information graphical symbols for use on sign - Part 4: Symbols for recreation sport$330.00
- GB/T 10001.4-2021Public information graphical symbols - Part 4: Symbols for recreation sport$330.00
- GB/T 10001.5-2006Public information graphical symbols for use on sign - Part 5: Symbols for shopping$360.00
- GB/T 10001.5-2021Public information graphical symbols - Part 5: Symbols for shopping$360.00
- GB/T 10001.6-2006Public information graphical symbols for use on sign - Part 6: Symbols for medical treatment and health care$360.00
- GB/T 10001.6-2021Public information graphical symbols - Part 6: Symbols for medical treatment and health care$360.00
- GB/T 10001.7-2021Public information graphical symbols - Part 7: Symbols for office and teaching$150.00
- GB/T 10001.8-2023Public information graphical symbols - Part 8: Symbols for behavioral indicators$330.00
- GB/T 10001.9-2008Public information graphical symbols for use on sign - Part 9: Symbols for accessible facilities$210.00
- GB/T 10001.9-2021Public information graphical symbols - Part 9: Symbols for accessible facilities$210.00
- GB/T 10002.1-1996Unplasticized polyvinyl chloride (PVC-U) pipe for water supply$485.00
- GB/T 10002.1-2006Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply$85.00
- GB/T 10002.1-2023Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply$485.00
- GB/T 10002.2-1988Unplasticized polyvinyl chloride (PVC-U) fitting for water supply$515.00
- GB/T 10002.2-2003Fittings made of unplasticized poly (vinyl chloride) (PVC-U) for water supply$515.00
- GB/T 10002.2-2023Unplasticized poly (vinyl chloride) (PVC-U) fittings for water supply$515.00
- GB/T 10002.3-1996Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems$255.00
- GB/T 10002.3-2011Valves made of unplasticized poly (vinyl chloride) (PVC-U) for water supply$255.00
- GB/T 10003-1996Biaxially oriented polypropylene plain film$315.00
- GB/T 10003-2008Biaxially oriented polypropylene(BOPP) film for general use$165.00
- GB/T 10003-2026Biaxially oriented polypropylene (BOPP) film$315.00
- GB/T 10004-1998Laminated retort film and pouch$360.00
- GB/T 10004-2008Plastic laminated films & pouches for packaging dry lamination & extrusion lamination$75.00
- GB/T 10004-2026Plastic/Plastic laminated films and pouches for packaging$360.00
- GB/T 10005-1998Biaxially oriented polypropylene laminated polyethylene (BOPP/LDPE) films and pouches$105.00
- GB/T 10006-1988Plastics. Film and sheeting. Determination of the coefficients of friction$135.00
- GB/T 10006-2021Plastics - Film and sheeting - Determination of the coefficients of friction$135.00
- GB/T 10007-1988Cellular plastics--Determination of shear strength of rigid materials$180.00
- GB/T 10007-2008Rigid cellular plastics - Determination of shear properties$125.00
- GB/T 10007-2026Rigid cellular plastics - Determination of shear properties$180.00
- GB/T 10009-1988Acrylonitrile-butadiene-styrene (ABS) plastics extrusion plates$85.00
- GB/T 10009-2026Acrylonitrile-butadiene-styrene (ABS) plastic extruded sheets$120.00
- GB/T 10010-2009Plasticized polyvinyl chloride(PVC) tubing for medical uses$150.00
- GB/T 10010-2026Plasticized polyvinyl chloride tubing for medical use$120.00
- GB/T 10016-1988Tree seed storage$684.00
- GB/T 10020-1988Adding machines. Layout of function keyboard$49.00
- GB/T 10021-1988Office machines. Basic arrangement for the alphanumeric section of keyboards operated with both hands$90.00
- GB/T 10022.1-1998Information technology. Picture coding. Part 1: Identification$135.00
- GB/T 10022.2-1996Information technology. Picture coding methods. Part 2: Procedure for registration$100.00
- GB/T 10029-2000Bluntnose black bream$145.00
- GB/T 10029-2010Bluntnose black bream$145.00
- GB/T 10030-1988Standards for quality of blunt head bream fry and fingerling$195.00
- GB/T 10030-2006Blunt snout bream fry and fingerling$195.00
- GB/T 10030-2026Bluntnose black bream - Broodstock, fry and fingerlings$195.00
- GB/T 10042-1988Clutch--Terminology$135.00
- GB/T 10042-2003Clutch - Terminology$385.00
- GB/T 10042-2017Clutch vocabulary$385.00
- GB/T 10043-1988Clutch--Classification$175.00
- GB/T 10043-2003Clutch - Classification$195.00
- GB/T 10043-2017Clutch classification$195.00
- GB/T 10044-1988Covered electrodes and welding rods for welding cast iron$285.00
- GB/T 10044-2006Welding electrodes and rods for cast iron$285.00
- GB/T 10044-2022Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron$285.00
- GB/T 10045-1988Carbon steel flux cored wires for arc welding$205.00
- GB/T 10045-2001Carbon steel flux cored electrodes for arc welding$165.00
- GB/T 10045-2018Tubular cored electrodes for non-alloy and fine grain steels$165.00
- GB/T 10046-1988Silver brazing filler metals$580.00
- GB/T 10046-2000Silver filler metals for brazing$580.00
- GB/T 10046-2008Silver brazing filler metals$580.00
- GB/T 10046-2018Silver brazing filler metals$580.00
- GB/T 10047-1988Camera$325.00
- GB/T 10047.1-2005Camera - Part 1: Civil miniature camera$135.00
- GB/T 10050-1988Optics and optical instruments--Reference wavelengths$85.00
- GB/T 10050-2009Optics and optical instruments -- Reference wavelengths$85.00
- GB/T 10051.1-1988Lifting hooks--Mechanical properties, lifting capacities, stresses and materials$135.00
- GB/T 10051.1-2010Lifting hooks -- Part 1: Mechanical properties, lifting capacities, stresses and materials$135.00
- GB/T 10051.10-2010Lifting hooks -- Part 10: Hook nuts$165.00
- GB/T 10051.11-2010Lifting hooks -- Part 11: Securing plates for hook nuts$105.00
- GB/T 10051.12-2010Lifting hooks -- Part 12: Safety latch for lifting hook$165.00
- GB/T 10051.13-2010Lifting hooks -- Part 13: Technical conditions for laminated hooks$85.00
- GB/T 10051.14-2010Lifting hooks -- Part 14: Inspection of laminated hooks in service$85.00
- GB/T 10051.15-2010Lifting hooks - Part 15: Laminated hooks with point$105.00
- GB/T 10051.2-1988Lifting hooks--Technical conditions of shank hook$105.00
- GB/T 10051.2-2010Lifting hooks -- Part 2: Technical conditions for forged hooks$105.00
- GB/T 10051.3-2010Lifting hooks -- Part 3: Inspection of forged hooks in service$105.00
- GB/T 10051.4-1988Lifting hooks--Blanks of shank hook with point$165.00
- GB/T 10051.4-2010Lifting hooks -- Part 4: Blanks of shank hook with point$165.00
- GB/T 10051.5-1988Lifting hooks--Shank hooks with point$165.00
- GB/T 10051.5-2010Lifting hooks -- Part 5: Shank hooks with point$165.00
- GB/T 10051.6-2010Lifting hooks -- Part 6: Blanks of ramshorn shank hooks$165.00
- GB/T 10051.7-2010Lifting hooks -- Part 7: Ramshorn shank hooks$145.00
- GB/T 10051.8-2010Lifting hooks -- Part 8: Blanks of cross pieces for hooks$145.00
- GB/T 10051.9-2010Lifting hooks -- Part 9: Cross pieces$165.00
- GB/T 10052-1996Building hoist--Classification$165.00
- GB/T 10054-1996Building hoist--Specification$435.00
- GB/T 10054-2005Builders' hoists for goods -- Part 1: Hoists with accessible platforms$435.00
- GB/T 10054.1-2014Builder's hoists for goods - Part 1: Hoists with accessible carriers$530.00
- GB/T 10054.1-2021Builders' hoists for goods - Part 1: Hoists with accessible platforms$530.00
- GB/T 10056-1996Building hoist--Testing method$510.00
- GB/T 10058-1997Specification for lifts$225.00
- GB/T 10058-2009Specification for electric lifts$225.00
- GB/T 10058-2023Specification for electric lifts$225.00
- GB/T 10059-1997Lifts--Testing methods$455.00
- GB/T 10059-2009Electric lifts - Testing methods$455.00
- GB/T 10059-2023Testing methods for electric lifts$455.00
- GB/T 10060-2011Code for acceptance of electric lifts installation$300.00
- GB/T 10060-2023Code for installation acceptance of electric lifts$300.00
- GB/T 10061-1988Screen plants--Codification for designating perforations$195.00
- GB/T 10061-2008Screen plants -- Codification for designating perforations$195.00
- GB/T 10062.1-2003Calculation of load capacity of bevel gear -- Part 1: Introduction and general influence factors$505.00
- GB/T 10062.2-2003Calculation of load capacity of bevel gear -- Part 2: Calculation of surface durability (pitting)$195.00
- GB/T 10062.3-2003Calculation of load capacity of bevel gear -- Part 3: Calculation of tooth root strength$355.00
- GB/T 10063-1988Simplified methods for the calculation of load capacity of involute cylindrical gears for general machines$475.00
- GB/T 10064-1988Methods of test for the determination of the insulation resistance of solid insulating materials$280.00
- GB/T 10064-2006Methods of test for the determination of the insulation resistance of solid insulating materials$105.00
- GB/T 10065-1988Gassing of insulating liquids under electrical stress and ionization$255.00
- GB/T 10065-2007Gassing of insulating liquids under electrical stress and ionization$255.00
- GB/T 10066.1-1988Test methods for electroheat installations--General$455.00
- GB/T 10066.1-2004Test methods for electro-heat installations - Part 1: General$455.00
- GB/T 10066.1-2019Test methods for electroheating and electromagnetic processing installations -- Part 1: General$455.00
- GB/T 10066.10-2005Test methods for electro-heat installations -- Part 10: Direct arc furnaces$195.00
- GB/T 10066.11-2005Test methods for electro-heat installations - Part 11: Submerged-arc furnaces$195.00
- GB/T 10066.11-2016Test methods for electroheat installations -- Part 11: Submerged-arc furnaces$195.00
- GB/T 10066.12-2006Test methods for electro-heat installations - Part 12: Infrared heating installations$360.00
- GB/T 10066.12-2020Test methods for electroheating installations - Part 12: Infrared electroheating installations$360.00
- GB/T 10066.2-1988Test methods for electroheat installations--Induction channel furnaces$240.00
- GB/T 10066.2-2004Electric equipment test methods - Part 2: induction channel furnace$240.00
- GB/T 10066.2-2019Test methods for electroheating and electromagnetic processing installations -- Part 2: Direct arc furnaces$240.00
- GB/T 10066.3-1988Test methods for electroheat installations--Coreless induction furnaces$225.00
- GB/T 10066.3-2004Electric equipment test methods - Part 3: coreless induction furnace$225.00
- GB/T 10066.3-2014Test methods for electroheat installations -- Part 3: Induction channel furnaces and induction crucible furnace$225.00
- GB/T 10066.31-2007Test methods for electro-heat installations -- Part 31: High-frequency induction heating installation -- Test methods for the determination of power output of the generator$185.00
- GB/T 10066.32-2021Test methods for electroheating and electromagnetic processing installations - Part 32: Induction through-heating installations$435.00
- GB/T 10066.4-1988Test methods for electroheat installations--Indirect resistance furnaces$225.00
- GB/T 10066.4-2004Test methods for electro-heat installations -- Part 4: Indirect resistances furnaces$225.00
- GB/T 10066.5-2014Test methods for electroheat installations -- Part 5: Plasma equipment for electroheat and electrochemical applications$275.00
- GB/T 10066.6-2008Test methods for electro-heat installations - Part 6: Industrial microwave heating installations-test methods for the determination of power output$240.00
- GB/T 10066.6-2018Test methods for electroheating and electromagnetic processing installations -- Part 6: Test methods for the determination of power output of industrial microwave heating installations$240.00
- GB/T 10066.7-2004Electric equipment electric equipment test methods - Part 7: electron gun$135.00
- GB/T 10066.7-2009Test methods for electro-heat installations -- Part 7: Electro-heating installation with electron guns$135.00
- GB/T 10066.8-2006Test methods for electro-heat installations -- Part 8: Electroslag remelting furnaces$270.00
- GB/T 10066.8-2026Test methods for electroheat and electromagnetic processing installations - Part 8: Electroslag remelting furnaces$255.00
- GB/T 10066.9-2008Test methods for electro-heat installations -- Part 9: The determination of power output for High-frequency dielectric heating installation$155.00
- GB/T 10067.1-1988Basic specifications for electroheat installations--General$235.00
- GB/T 10067.1-2005Basic specifications for electro-heat installations - Part 1: General$235.00
- GB/T 10067.1-2019Basic specifications for electroheating and electromagnetic processing installations - Part 1: General$235.00
- GB/T 10067.101-2023Basic specifications for electroheating and electromagnetic processing installations - Part 101: General requirements for vacuum electroheating and electromagnetic processing installations$490.00
- GB/T 10067.2-1988Basic specifications for electroheat installations--Steelmaking arc furnaces$105.00
- GB/T 10067.2-2005Basic specifications for electroheat installations Part 2:Arc electroheat installations$105.00
- GB/T 10067.21-2015Basic specifications for electroheat installations - Part 21: Large capacity electric arc furnace using alternating current$235.00
- GB/T 10067.3-1988Basic specifications for electroheat installations--Induction electroheat installations$185.00
- GB/T 10067.3-2005Basic specifications for electro-heat installations - Part 3: Induction electro-heat installations$185.00
- GB/T 10067.3-2015Basic specifications for electroheat installations - Part 3: Induction electroheat installation$185.00
- GB/T 10067.31-2013Basic specifications for electroheat installations - Part 31: Medium frequency coreless induction furnace$195.00
- GB/T 10067.32-2013Basic specifications for electroheat installations - Part 32: A set of medium frequency coreless induction furnaces with a voltage type frequency converter$195.00
- GB/T 10067.33-2014Basic specifications for electroheat installations-Part 33: Mains frequency induction crucible furnace for melting copper$205.00
- GB/T 10067.34-2015Basic specifications for electroheat installations - Part 34: Transistor type high frequency induction heating installation$235.00
- GB/T 10067.35-2015Basic specifications for electroheat installations - Part 35: Medium frequency vacuum induction melting furnace$205.00
- GB/T 10067.36-2021Basic specification for electroheating and electromagnetic processing installations - Part 36: Induction through-heating installations$240.00
- GB/T 10067.37-2024Basic specifications for electroheating and electromagnetic processing installations - Part 37: Superconducting direct current induction through-heating installations$325.00
- GB/T 10067.4-1988Basic specifications for electroheat installations--Indirect resistance furnaces$105.00
- GB/T 10067.4-2005Basic specifications for electroheat installations Part 4:Indirect resistance furnaces$105.00
- GB/T 10067.41-2013Basic specifications for electroheat installations - Part 41: Mesh belt resistance heating unit$195.00
- GB/T 10067.410-2014Basic specifications for electroheat installations-Part 410: Single crystal growing furnace$205.00
- GB/T 10067.411-2014Basic specifications for electroheat installations-Part 411: Electroheat bath furnace$235.00
- GB/T 10067.412-2015Basic specifications for electroheat installations - Part 412: Box-type quenching furnaces$235.00
- GB/T 10067.413-2015Basic specifications for electroheat installations - Part 413: Resistance furnaces using in the experiments$235.00
- GB/T 10067.414-2018Basic specification for electroheating and electromagnetic processing installations - Part 414: Industrial gem furnace$205.00
- GB/T 10067.415-2018Basic specifications for electroheating installations - Part 415: Aluminum annealing furnace$205.00
- GB/T 10067.416-2019Basic specifications for electroheating and electromagnetic processing installations - Part 416: Polysilicon ingot furnace$205.00
- GB/T 10067.417-2023Basic specifications for electroheating and electromagnetic processing installations - Part 417:Silicon carbide crystal growth installations$285.00
- GB/T 10067.42-2013Basic specifications for electroheat installations - Part 42: Pusher resistance heating unit$195.00
- GB/T 10067.43-2014Basic specifications for electroheat installations-Part 43: Forced convection pit resistance furnaces$235.00
- GB/T 10067.44-2014Basic specifications for electroheat installations-Part 44: Box-type resistance furnaces$225.00
- GB/T 10067.45-2014Basic specifications for electroheat installations-Part 45: Vacuum quenching furnace$205.00
- GB/T 10067.46-2014Basic specifications for electroheat installations-Part 46: Resistance bell furnace$235.00
- GB/T 10067.47-2014Basic specifications for electroheat installations-Part 47: Vacuum heat treatment and brazing furnace$235.00
- GB/T 10067.48-2014Basic specifications for electroheat installations-Part 48: Bogie hearth resistance furnaces$235.00
- GB/T 10067.49-2014Basic specifications for electroheat installations-Part 49: Natural convection pit resistance furnaces$235.00
- GB/T 10067.5-1993Basic specifications for electroheat installations. High frequency dielectric heating installations$165.00
- GB/T 10067.6-2023Basic specifications for electroheating and electromagnetic processing installations - Part 6: Industrial microwave heating installations$380.00
- GB/T 10067.8-2016Basic specifications for electroheat installations - Part 8: Electroslag remelting furnaces$145.00
- GB/T 10068-2008Mechanical vibration of electrical machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration$185.00
- GB/T 10068-2020Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity$185.00
- GB/T 10069.1-1988Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise$125.00
- GB/T 10069.1-2006Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines$125.00
- GB/T 10069.2-1988Measurement of dirborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise$169.00
- GB/T 10069.3-2008Measurement of noise emitted by rotating electrical machines and determination of noise limits - Part 3: Noise limits$360.00
- GB/T 10069.3-2024Measurement of airborne noise emitted by rotating electrical machines and the noise limits - Part 3: Noise limits$360.00
- GB/T 10071-1988Measurement method of environmental vibrationof urban area$139.00
- GB/T 10072-1988Specifications of electronic flash equipments for photograph$249.00
- GB/T 10072-2003Specifications of electronic flash equipment for photograph$255.00
- GB/T 10072-2025Specifications of electronic flash equipments for photograph$255.00
- GB/T 10073-1996Methods of evaluation for image quality of electrostatic copies [including MODIFICATION 1]$210.00
- GB/T 10073-2008Methods of evaluation for image quality of electrostatic copes$210.00
- GB/T 10073-2021Methods of evaluation for image quality of electrostatic copies$210.00
- GB/T 10077-1988Maximum outside size and capacity series for lithium battery$300.00
- GB/T 10077-2008Classification, designation nomenclature and basic specifications for lithium primary batteries$165.00
- GB/T 10077-2026Classification, designation and basic characteristics of lithium primary batteries$300.00
- GB/T 10079-1988Enclosed single-stage reciprocating refrigerant compressors$235.00
- GB/T 10079-2001Single stage reciprocating refrigerant compressors$235.00
- GB/T 10079-2018Single-stage reciprocating refrigerant compressor (unit)$235.00
- GB/T 10081-1988Straight-sided internal spline--Length series$90.00
- GB/T 10081-2005Straight-sided internal splines Length series$90.00
- GB/T 10082-1988Technical requirements of heavy duty railway motor trolley$390.00
- GB/T 10082-1996Technical requirements of heavy duty railway motor trolley$390.00
- GB/T 10082-2010Technical requirements of heavy duty railway motor trolley [including MODIFICATION 1]$390.00
- GB/T 10082-2024Rail car - Heavy-duty rail motor car$390.00
- GB/T 10084-1988Vibration and shock-methods for analysis and presentation of data$79.00
- GB/T 10085-1988Basic parameters of cylindrical worm gears$235.00
- GB/T 10085-2018Basic paramaters of cylindrical worm gears$235.00
- GB/T 10086-1988Terminology and symbols for cylindrical worm and wormwheel$80.00
- GB/T 10086-2018Symbols for cylindrical worm and wormwheel$80.00
- GB/T 10086-2026Cylindrical worms and worm wheels—Designations, basic profiles and drawing requirements$255.00
- GB/T 10087-1988Basic tooth profile of cylindrical worm$75.00
- GB/T 10087-2018Basic tooth profile of cylindrical worm$75.00
- GB/T 10088-1988Module and diameter of cylindrical worm$55.00
- GB/T 10088-2018Module and diameter of cylindrical worm$55.00
- GB/T 10089-1988Accuracy of cylindrical worm and wormwheel$355.00
- GB/T 10089-2018Accuracy of cylindrical worm and wormwheel$355.00
- GB/T 10090-1988Basic parameters for cylindrical gear units$79.00
- GB/T 10091.1-1995Tabular layouts of article characteristics. Definitions and principles$255.00
- GB/T 10091.1-2025Tabular layouts of article characteristic - Part 1: Definitions and principles$255.00
- GB/T 10092-1988Multiple comparison for test results$355.00
- GB/T 10092-2009Statistical interpretation of data - Multiple comparison for test results$355.00
- GB/T 10093-1988Probabilistic limit states design (Normal-Normal mode)$105.00
- GB/T 10093-2009Probabilistic limit states design(Normal-Normal mode)$105.00
- GB/T 10094-1988The confidence interval of quantile Xp for normal distribution$620.00
- GB/T 10094-2009The confidence limits of quantile and coefficient of variation for normal distribution$620.00
- GB/T 10095.1-2001Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth$500.00
- GB/T 10095.1-2008Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth$500.00
- GB/T 10095.1-2022Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth$500.00
- GB/T 10095.2-2001Cylindrical gears-system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information$300.00
- GB/T 10095.2-2008Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information$300.00
- GB/T 10095.2-2023Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations$300.00
- GB/T 10096-1988Accuracy of rack$79.00
- GB/T 10097-1988Worsted and woollen cards--Width of cylinder and widthon the wire$169.00
- GB/T 10097-2003Textile machinery and accessories - Worsted and woollen cards - Width of cylinder and width on the wire$25.00
- GB/T 10098-1988The specification of marine gearbox for medium speed diesel engine$165.00
- GB/T 10101-1988Buoy shackle$225.00
- GB/T 10102-1988Shipbuilding. Shipborne barges, series 3. Ventilation system. Principal mating dimensions$79.00
- GB/T 10103-1988Ships wire nippers for topping lifts$79.00
- GB/T 10104-1995Marine magnetic compass of class B general specifications$255.00
- GB/T 10104-2011Marine magnetic compass of class B$255.00
- GB/T 10107.1-1988Basic terminology of cycloidal drives$620.00
- GB/T 10107.1-2012Cycloidal drives - Part 1: Basic terminology$620.00
- GB/T 10107.2-1988Representation of drawings for cycloidal drives$145.00
- GB/T 10107.2-2012Cycloidal drives - Part 2: Representation of drawings$145.00
- GB/T 10107.3-1988Symbols of geometrical data for cycloidal drives$75.00
- GB/T 10107.3-2012Cycloidal drives - Part 3: Symbols of geometrical data$75.00
- GB/T 10108-1988Silk fabrics for export$165.00
- GB/T 10108-2008Mulberry silk fabrics for export$165.00
- GB/T 10109-1988Synthetic filament yarn fabrics for export$165.00
- GB/T 10110-1988Grey kimono silk for export$119.00
- GB/T 10111-1988Methods for random sampling by utilizing dices of random number$355.00
- GB/T 10111-2008Generation of random numbers and procedures applied to sampling inspection for product quality$355.00
- GB/T 10112-1988Principles and methods of terminology$570.00
- GB/T 10112-1999Terminology work. Principles and methods$570.00
- GB/T 10112-2019Terminology work - Principles and methods$570.00
- GB/T 10113-1988Definition of common terms used in classification and coding$105.00
- GB/T 10113-2003Definition of common terms used in classification and coding$105.00
- GB/T 10114-1988Rules for the code representation of administrative divisions under counties$55.00
- GB/T 10114-2003Rules for the code representation of administrative divisions under counties$55.00
- GB/T 10115-1988Fresh cocoon of tussah$145.00
- GB/T 10115-2008Tussah fresh cocoon$145.00
- GB/T 10115-2024Tussah fresh cocoon$145.00
- GB/T 10116-1988Ammonium paratungstate$85.00
- GB/T 10116-2007Ammonium paratungstate$85.00
- GB/T 10117-1988High purity antimonium$135.00
- GB/T 10117-2009High purity antimonium$135.00
- GB/T 10117-2021High purity antimonium$135.00
- GB/T 10118-1988High purity gallium$185.00
- GB/T 10118-2009High purity gallium$185.00
- GB/T 10118-2023High purity gallium$185.00
- GB/T 10119-1988Copper-zinc alloys--Determination of dezincification corrosion resistance$145.00
- GB/T 10119-2008Determination of dezincification corrosion resistance of brass$145.00
- GB/T 10120-1996Metallic materials--Stress relaxation test$255.00
- GB/T 10120-2013Metallic materials -- Tensile stress relaxation -- Method of test$255.00
- GB/T 10121-1988Steel products--Method for magnetic particle inspection of tower sample$135.00
- GB/T 10121-2008Steel products-Method for magnetic particle inspection of tower sample$135.00
- GB/T 10122-1988Iron ores(sinter and pellets). Sampling and sample preparation for physical testing$79.00
- GB/T 10123-1988Metal--Terms and definition of corrosion and protection$485.00
- GB/T 10123-2001Corrosion of metals and alloys - Basic terms and definitions$485.00
- GB/T 10123-2022Corrosion of metals and alloys - Vocabulary$485.00
- GB/T 10125-1988Corrosion tests in artificial atmosphere--Salt spray tests (SS tests)$330.00
- GB/T 10125-1997Corrosion tests in artificial atmospheres--Salt spray tests$330.00
- GB/T 10125-2012Corrosion tests in artificial atmospheres - Salt spray tests$330.00
- GB/T 10125-2021Corrosion tests in artificial atmospheres - Salt spray tests$330.00
- GB/T 10126-1988Fe-Cr-Ni alloys--Stress corrosion test in high temperature water$169.00
- GB/T 10126-2002Fe-Cr-Ni alloys - Stress corrosion test in high temperature water$105.00
- GB/T 10127-1988Stainless steels--Method of ferric chloride crevice corrosion test$240.00
- GB/T 10127-2002Corrosion of metals and alloys - Test method for crevice corrosion$125.00
- GB/T 10127-2026Corrosion of metals and alloys - Test method for crevice corrosion$240.00
- GB/T 10128-1988Metallic materials--Torsion test at room temperature$300.00
- GB/T 10128-2007Metallic materials - Torsion test at ambient temperature$85.00
- GB/T 10128-2026Metallic materials - Torsion test at ambient temperature$300.00
- GB/T 10129-1988Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies$295.00
- GB/T 10129-2019Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies$295.00
- GB/T 10130-1988Electrode paste$169.00
- GB/T 10131-1988Mn-Nb-Fe Alloy$79.00
- GB/T 10149-1988Terminology and symbol for medical X-ray equipment$235.00
- GB/T 10151-2008Medical diagnostic X-ray equipment - Specifications for high voltage cable plugs and sockets$125.00
- GB/T 10155-1988Stereomicroscope$79.00
- GB/T 10156-1988Specification for leveler$345.00
- GB/T 10156-1997Leveller$345.00
- GB/T 10156-2009Level$345.00
- GB/T 10157-1988Test method for noise emitted by copying machine$79.00
- GB/T 10159-1995Piano$105.00
- GB/T 10159-2002Piano$450.00
- GB/T 10159-2008Piano$450.00
- GB/T 10159-2015Piano$450.00
- GB/T 10159-2023Piano$450.00
- GB/T 10160-1995Test methods of locking force and opening force for medical use forceps$165.00
- GB/T 10162-1988Method of determination for pulling force of clamping of medical forceps$79.00
- GB/T 10168-1988Backhoe loader--Terminology$420.00
- GB/T 10168-2008Earth-moving machinery - Backhoe loaders - Definitions and commercial specifications$420.00
- GB/T 10168-2020Earth-moving machinery--Backhoe loaders--Terminology and commercial specifications$420.00
- GB/T 10169-1988Backhoe loader--Classification$169.00
- GB/T 10170-1988Backhoe loader--Specification$185.00
- GB/T 10170-2010Backhoe loader - Technical specifications [including MODIFICATION 1]$185.00
- GB/T 10170-2021Earth-moving machinery - Backhoe loader - Technical specifications$185.00
- GB/T 10171-1988Concrete batching plant--Classification$590.00
- GB/T 10171-2005Concrete mixing plant (tower)$590.00
- GB/T 10171-2016Building construction machinery and equipment - Concrete mixing plant(tower)$590.00
- GB/T 10172-1988Concrete batching plant--Specification$79.00
- GB/T 10173-1988Gear hobbing machines--Parameters$165.00
- GB/T 10175-1988Earth moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load$169.00
- GB/T 10175.1-2008Earth moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load$235.00
- GB/T 10175.2-2008Earth moving machinery -- Loaders and backhoe loaders -- Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height$125.00
- GB/T 10178-1988Site testing of fans$700.00
All GB/T ranges
- GB/T 1.1-1993 – GB/T 245-2016
- GB/T 246-1982 – GB/T 601-2002
- GB/T 601-2016 – GB/T 915-1995
- GB/T 915-2010 – GB/T 1303-1977
- GB/T 1303.1-1998 – GB/T 1617-1989
- GB/T 1617-2002 – GB/T 1927.9-2021
- GB/T 1928-1991 – GB/T 2399-2003
- GB/T 2399-2014 – GB/T 2590.6-1981
- GB/T 2590.7-1981 – GB/T 2900.17-1994
- GB/T 2900.17-2009 – GB/T 3048.4-1994
- GB/T 3048.4-2007 – GB/T 3280-1992
- GB/T 3280-2007 – GB/T 3533.2-1984
- GB/T 3533.2-2017 – GB/T 3789.14-1991
- GB/T 3789.15-1991 – GB/T 3903.6-2017
- GB/T 3903.6-2024 – GB/T 4148-1993
- GB/T 4148-2003 – GB/T 4334-2008
- GB/T 4334-2020 – GB/T 4649-2008
- GB/T 4649-2018 – GB/T 4752-1984
- GB/T 4752-2002 – GB/T 4955-1997
- GB/T 4955-2005 – GB/T 5033-1985
- GB/T 5034-1985 – GB/T 5169.8-1985
- GB/T 5169.9-1993 – GB/T 5340.3-2006
- GB/T 5341-1985 – GB/T 5585.1-2005
- GB/T 5585.1-2018 – GB/T 5824-2008
- GB/T 5824-2021 – GB/T 6102.2-1985
- GB/T 6102.2-2009 – GB/T 6323.4-1994
- GB/T 6323.5-1994 – GB/T 6553-2014
- GB/T 6553-2024 – GB/T 6742-2007
- GB/T 6743-1986 – GB/T 6988.6-1993
- GB/T 6989-1986 – GB/T 7284-1998
- GB/T 7284-2016 – GB/T 7596-2000
- GB/T 7596-2008 – GB/T 7739.6-2021
- GB/T 7739.7-2007 – GB/T 8059.2-1987
- GB/T 8059.2-1995 – GB/T 8303-1987
- GB/T 8303-2002 – GB/T 8638.1-1988
- GB/T 8638.10-1988 – GB/T 8995-2026
- GB/T 8996-1988 – GB/T 9275-1988
- GB/T 9275-2008 – GB/T 9652.1-1997
- GB/T 9652.1-2007 – GB/T 9938-2013
- GB/T 9941-1988 – GB/T 10178-1988
- GB/T 10178-2006 – GB/T 10512-1989
- GB/T 10512-2008 – GB/T 10870-1989
- GB/T 10870-2001 – GB/T 11168-2009
- GB/T 11170-1989 – GB/T 11464-2013
- GB/T 11465-1989 – GB/T 11896-1989
- GB/T 11897-1989 – GB/T 12196-1990
- GB/T 12197-1990 – GB/T 12510-2015
- GB/T 12511-1990 – GB/T 12690.6-2017
- GB/T 12690.7-1990 – GB/T 12959-2008
- GB/T 12959-2024 – GB/T 13210-2024
- GB/T 13211-1991 – GB/T 13459-1992
- GB/T 13459-2008 – GB/T 13663.2-2018
- GB/T 13663.3-2018 – GB/T 13869-2008
- GB/T 13869-2017 – GB/T 14074.2-1993
- GB/T 14074.3-1993 – GB/T 14328.4-1993
- GB/T 14329-2008 – GB/T 14506.15-1993
- GB/T 14506.15-2010 – GB/T 14684-2011
- GB/T 14684-2022 – GB/T 14926.21-1994
- GB/T 14926.21-2001 – GB/T 15079.3-1994
- GB/T 15079.4-1994 – GB/T 15328-1994
- GB/T 15328-2009 – GB/T 15590-1995
- GB/T 15590-2008 – GB/T 15806-1995
- GB/T 15806-2006 – GB/T 16085-1995
- GB/T 16086-1995 – GB/T 16478.4-1996
- GB/T 16478.5-1996 – GB/T 16674.2-2016
- GB/T 16674.3-2023 – GB/T 16895.1-2008
- GB/T 16895.10-2001 – GB/T 17149.4-1997
- GB/T 17149.5-1997 – GB/T 17367-1998
- GB/T 17368-1998 – GB/T 17607-1998
- GB/T 17608-1998 – GB/T 17783-1999
- GB/T 17783-2019 – GB/T 17980.143-2004
- GB/T 17980.144-2004 – GB/T 18122-2000
- GB/T 18123-2000 – GB/T 18311.2-2026
- GB/T 18311.20-2007 – GB/T 18508-2001
- GB/T 18508-2014 – GB/T 18779.3-2023
- GB/T 18779.4-2020 – GB/T 18932.11-2002
- GB/T 18932.12-2002 – GB/T 19208-2003
- GB/T 19208-2008 – GB/T 19449.4-2013
- GB/T 19450-2004 – GB/T 19699-2023
- GB/T 19700-2005 – GB/T 19952-2005
- GB/T 19953-2005 – GB/T 20168-2006
- GB/T 20168-2017 – GB/T 20443-2006
- GB/T 20444-2006 – GB/T 20736-2006
- GB/T 20736-2025 – GB/T 20975.15-2008
- GB/T 20975.15-2020 – GB/T 21283.5-2008
- GB/T 21283.6-2015 – GB/T 21623-2008
- GB/T 21624-2008 – GB/T 21930-2008
- GB/T 21931.1-2008 – GB/T 22260-2023
- GB/T 22261-2008 – GB/T 22527-2008
- GB/T 22528-2008 – GB/T 22838.2-2009
- GB/T 22838.3-2009 – GB/T 23274.7-2009
- GB/T 23274.8-2009 – GB/T 23576-2024
- GB/T 23577-2009 – GB/T 23901.1-2009
- GB/T 23901.1-2019 – GB/T 24301-2009
- GB/T 24302-2009 – GB/T 24639-2009
- GB/T 24640-2009 – GB/T 24975.3-2010
- GB/T 24975.4-2010 – GB/T 25271-2010
- GB/T 25272-2010 – GB/T 25707-2010
- GB/T 25707-2025 – GB/T 26052-2010
- GB/T 26052-2022 – GB/T 26412-2010
- GB/T 26413-2010 – GB/T 26803.1-2011
- GB/T 26803.2-2011 – GB/T 27534.2-2025
- GB/T 27534.3-2011 – GB/T 27919-2011
- GB/T 27920.1-2011 – GB/T 28410-2012
- GB/T 28410-2025 – GB/T 28819-2023
- GB/T 28821-2012 – GB/T 29229-2012
- GB/T 29230.1-2012 – GB/T 29618.1-2013
- GB/T 29618.1-2017 – GB/T 30095-2013
- GB/T 30096-2013 – GB/T 30420.1-2013
- GB/T 30420.2-2019 – GB/T 30845.2-2021
- GB/T 30846-2014 – GB/T 31230.3-2014
- GB/T 31230.4-2014 – GB/T 31586.2-2015
- GB/T 31587-2015 – GB/T 32065.8-2020
- GB/T 32065.9-2019 – GB/T 32413-2015
- GB/T 32414-2015 – GB/T 32800.5-2023
- GB/T 32800.6-2023 – GB/T 33162-2016
- GB/T 33163-2016 – GB/T 33525-2025
- GB/T 33526-2017 – GB/T 33887-2017
- GB/T 33888-2017 – GB/T 34308.2-2017
- GB/T 34308.3-2017 – GB/T 34690.7-2017
- GB/T 34690.8-2017 – GB/T 35111-2017
- GB/T 35112-2017 – GB/T 35521-2017
- GB/T 35522-2017 – GB/T 35966-2018
- GB/T 35967-2018 – GB/T 36410.4-2018
- GB/T 36410.5-2018 – GB/T 36818-2018
- GB/T 36819-2018 – GB/T 37270.2-2018
- GB/T 37270.3-2018 – GB/T 37721-2019
- GB/T 37722-2019 – GB/T 38136-2019
- GB/T 38137-2019 – GB/T 38593-2020
- GB/T 38594-2020 – GB/T 39039-2020
- GB/T 39040-2020 – GB/T 39493-2020
- GB/T 39494-2020 – GB/T 39914-2021
- GB/T 39915-2021 – GB/T 40392-2021
- GB/T 40393-2021 – GB/T 40837-2021
- GB/T 40838-2021 – GB/T 41329-2022
- GB/T 41330-2022 – GB/T 41805-2022
- GB/T 41806-2022 – GB/T 42272-2022
- GB/T 42273-2022 – GB/T 42890-2023
- GB/T 42891-2023 – GB/T 43448-2023
- GB/T 43449-2023 – GB/T 44014-2024
- GB/T 44020-2024 – GB/T 44596-2024
- GB/T 44597-2024 – GB/T 45169-2025
- GB/T 45170-2024 – GB/T 45677-2025
- GB/T 45678-2025 – GB/T 46128-2025
- GB/T 46129-2025 – GB/T 46594-2026
- GB/T 46595-2025 – GB/T 47055-2026
- GB/T 47056-2026 – GB/T 47534-2026
- GB/T 47535-2026 – GB/T 48000.3-2026
- GB/T 48000.4-2026 – GB/T 48446-2026
- GB/T 48447-2026 – GB/T 51013-2014
- GB/T 51015-2014 – GB/T 30685-2024
- GB/T 30819-2024 – GB/T 43746.3-2024
- GB/T 43753.1-2024 – GB/T 9914.2-2013