GB/T 10107.1-2012Cycloidal drives - Part 1: Basic terminology (English PDF)
摆线针轮行星传动 第1部分：基本术语
Open the GB/T 10107.1-2012 preview as PDF
This is a limited preview
Buy now to download the full PDF (43 pages)
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
September 3, 2012
Implementation date
March 1, 2013
Scope
GB/T 10107.1-2012 is the English-translated version of 摆线针轮行星传动 第1部分：基本术语.
GB/T 10107.1-2012 is the Chinese national standard on cycloidal drives - part 1: basic terminology, in the field of mechanical systems and components. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 3 September 2012 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 March 2013. Classification: ICS 21.120, CCS J19. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Document preview — GB/T 10107.1-2012
National Standard of the People's Republic of China
- ICS
- 21.120
- Classification
- J19
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- ForewordIII
- 1 Scope1
- 2 Terms and definitions1
- 3 Cycloid [gear] round18
- 4-pin [gear] round32
- 5 Cycloid planetary gear set37
- Index40
Foreword
GB/T 10107 "cycloid planetary transmission" includes the following three parts.
--- Part 1. Basic terminology;
--- Part 2. graphical method;
--- Part 3. Symbols of geometrical data.
This is Part 1 GB/T 10107 in.
Rules in this section in accordance with GB/T 1.1-2009 given draft.
This Part replaces GB/T 10107.1-1988 "Cycloid drive basic terminology." This part of GB/T 10107.1-
Compared to 1988, in addition to editorial amendments, the main changes are the following.
--- Adding new terms and definitions (see 2.1.1.4, 2.1.1.5, 2.1.1.6, 2.4.2.5, 2.4.2.6, 5.1.2.2, 5.1.2.3);
--- Increased synonyms part of the term (see 2.1.3.5, 3.2.1.7, 3.2.2.8, 3.3.2.7, 4.2.1.1, 4.2.2.1, 4.3.1.1, 4.3.2.1);
--- Complement and extend the definition of the term minority content (see 2.1.1.2, 2.1.1.3);
--- Adjusted increase in the content of Chapter 5;
--- Improvement of standards of the section, subsection titles (see 3.1, 3.1.1, 3.1.2, 4.1, 4.1.1);
--- Adjusted Synonyms part of the term (see 2.1.1, 2.1.1.3, 2.1.3.5, 2.4.2.2, 2.4.2.3, 2.4.2.4,
3.2.1.7, 3.2.2.8, 3.3.2.7, 4.2.1.1, 4.2.2.1, 4.3.1.1, 4.3.2.1).
This section is proposed and managed by the China Machinery Industry Federation.
This part of the main drafting unit. Hebei University, Tianjin Petrochemical General Machinery Research Institute.
Participated in the drafting of this section. Tianjin reducer Plant Co., Ltd., Shanghai slowdown Machinery Co., Ltd., Jiangsu Stallone reducer shares
1 Scope
This section GB/T 10107 provisions of the basic terminology and standard definitions cycloidal gear and pin gear planetary drive.
This section GB/T 10107 applies to Cycloid Drive.
Remaining clauses in the full document
- 2 Terms and definitions
- 2.1 Kinematics defined kinematicdefinitions
- 3 Cycloid [gear] round
- 5 Cycloid planetary gear set
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 43 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 10107.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 10107.1-2012 | Cycloidal drives - Part 1: Basic terminology | current edition | Current |
| GB/T 10107.1-1988 | Basic terminology of cycloidal drives | previous edition | Superseded |
This page sells the current edition, GB/T 10107.1-2012. Earlier editions are listed for reference only.
How to Buy GB/T 10107.1-2012
- 1Add to cart. Click the "Buy GB/T 10107.1-2012" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10107.2-2012 — Cycloidal drives - Part 2: Representation of drawings
GB/T 10107.3-2012 — Cycloidal drives - Part 3: Symbols of geometrical data
GB/T 47310-2026 — Determination of total silicon, aluminium, iron, potassium, sodium, calcium, magnesium, manganese, phosphorus, titanium and sulfur in soil - Monochromatic excitation energy dispersive X-ray fluorescence spectrometry
Secure payment via Stripe
Payments accepted
GB/T 10107.1-2012
$710.00