GB/T 10066.32-2021Test methods for electroheating and electromagnetic processing installations - Part 32: Induction through-heating installations (English PDF)
电热和电磁处理装置的试验方法 第32部分：感应透热装置
This is a limited preview
Buy now to download the full PDF (51 pages)
Need quotation for your management?
Get a formal quotation for GB/T 10066.32-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
May 21, 2021
Implementation date
December 1, 2021
Scope
GB/T 10066.32-2021 is the English-translated version of 电热和电磁处理装置的试验方法 第32部分：感应透热装置.
GB/T 10066.32-2021 is the Chinese standard "Test methods for electroheating and electromagnetic processing installations - Part 32: Induction through-heating installations".
Its scope clause reads: This document describes the test procedures, test conditions and test methods for determining the main performance parameters and operating characteristics of induction diathermy devices.
This document is applicable to the working frequency of low frequency, power frequency or intermediate frequency (up to 100kHz), for subsequent hot forming (such as forging, extrusion and rolling) Etc.)
The induction heating device that performs overall or partial heat transfer of metal blanks or workpieces can also be used for induction heating devices for heat treatment and other purposes.
Installation and reference for superconducting DC induction diathermy device. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 10066.32-2021
National Standard of the People's Republic of China
- Classification
- K 61
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements for tests and test conditions
- 5 Comparison of equipment or devices
- 6 Basic measurement and workload
- 7 Numerical simulation
- 8 Test item
- 9 Test method
- Appendix A (Informative) Energy Efficiency Evaluation
- Appendix B (Informative) Visual illustration of energy efficiency related situations
- Appendix C (informative) Energy recovery rate
- Appendix D (informative) Energy use assessment
- Appendix AA (Normative) Diagrams of symbols and definitions related to the main circuit of induction diathermy equipment
- Appendix BB (informative) Symbols used in this document
- Appendix CC (Normative) Determination of Blank Temperature Uniformity deltathetab
- References
1 Scope
This document describes the test procedures, test conditions and test methods for determining the main performance parameters and operating characteristics of induction diathermy devices.
This document is applicable to the working frequency of low frequency, power frequency or intermediate frequency (up to 100kHz), for subsequent hot forming (such as forging, extrusion and rolling)
Etc.) The induction heating device that performs overall or partial heat transfer of metal blanks or workpieces can also be used for induction heating devices for heat treatment and other purposes.
Installation and reference for superconducting DC induction diathermy device.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
This chapter of GB/T 10066.1-2019 is applicable, but supplemented as follows.
supplement.
GB/T 5959.1-2019 Safety of Electric Heating and Electromagnetic Processing Equipment Part 1.General Requirements (IEC 60519-1.2015,
IDT)
GB 5959.3-2008 Safety of electric heating devices Part 3.Special features for induction and conductive heating devices and induction melting devices
Requirements (IEC 60519-3.2005, IDT)
GB/T 10066.1-2019 Test methods for electric heating and electromagnetic treatment devices Part 1.General parts (IEC 60398.2015,
MOD)
3 Terms and definitions
The following terms and definitions defined in GB/T 10066.1-2019 apply to this document.
Note 101.For the following terms and definitions related to certain components and electrical parameters of the main circuit of induction diathermy equipment, see also the diagram in Appendix AA. symbol
For instructions, see Appendix BB.
3.101 Induction through-heating instalation
A complete set of equipment consisting of induction diathermy equipment and electrical and mechanical auxiliary equipment required for its operation and use.
Note. Electrical ancillary equipment includes all electrical components of the main circuit of induction diathermy equipment, power supply circuits and control systems of mechanical ancillary equipment. Mechanical accessories
The equipment includes the blank loading and unloading and conveying mechanism and its power equipment and water cooling system.
3.102 Induction through-heating equipment
It is composed of one or more heating inductors and their supporting frames (cabinet), and water and electricity connections, etc., for induction heating and heat preservation of the blank equipment.
GB/T 37752.1 | GB/T 5959.41 | GB/T 31137 | GB/T 10066.12 | GB/T 10066.2 | GB/T 10066.1 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 51 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 10066.1-2019Test methods for electroheating and electromagnetic processing installations -- Part 1: General
- GB/T 5959.1-2019Safety in installations for electroheating and electromagnetic processing -- Part 1: General requirements
- GB 5959.3-2008Safety in electro-heat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations
IEC 60519 · IEC 60398.2015
How to Download GB/T 10066.32-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5959.3-2008 — Safety in electro-heat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations
GB/T 10066.1-2019 — Test methods for electroheating and electromagnetic processing installations -- Part 1: General
GB/T 5959.1-2019 — Safety in installations for electroheating and electromagnetic processing -- Part 1: General requirements
Secure payment via Stripe
Payments accepted
GB/T 10066.32-2021
$435.00