Search GB/T
500 GB/T standards in English, from GB/T 915-2010 to GB/T 1303-1977, in code order.
- GB/T 915-2010Bismuth$145.00
- GB/T 917-2009Mark rules of highway route and number of national trunk highway$584.00
- GB/T 917-2017Chinese standard$420.00
- GB/T 917-2026Mark rules of highway route and number of national trunk highway$584.00
- GB/T 918.1-1989Classification and code for road vehicles. Motor vehicle$79.00
- GB/T 918.2-1989Classification and code for road vehicles. Non-motor vehicle$79.00
- GB/T 919-1994Code for highway classification$165.00
- GB/T 919-2002Code for highway classification$165.00
- GB/T 920-1989Code for classification and type of highway pavement$180.00
- GB/T 920-2002Code for classification and type of highway pavement$180.00
- GB/T 920-2023Code for highway pavement classification and type$180.00
- GB/T 921-1986Round wire circlips$104.00
- GB/T 922-1986Specifications for wood screws$164.00
- GB/T 923-1988Acorn nuts$125.00
- GB/T 923-2009Acorn hexagon nuts$125.00
- GB/T 925-1988Self-locking nuts, hexagon light$79.00
- GB/T 927-1988Self-locking nuts, hexagonal sphere$79.00
- GB/T 929-1988Self-locking nuts, single lug$165.00
- GB/T 930-1988Self-locking nuts, two lug$165.00
- GB/T 931-1988Self-locking nuts, angle$165.00
- GB/T 932-1988Self-locking nuts, single lug, sealing$165.00
- GB/T 933-1988Self-locking nuts, two lug, sealing$165.00
- GB/T 934-1989Methods for measuring meteorological conditions in the hot work environment$79.00
- GB/T 934-2008Methods for measuring meteorological conditions in the hot work environment$165.00
- GB/T 936-1989Colour TV receiver--Colour temperature of white point--Reference white and ittolerance$135.00
- GB/T 936-2008Color display chromaticity coordinates of white balance point and its tolerance$135.00
- GB/T 937-1988Self-locking nuts, floating, Gang channel$165.00
- GB/T 938-1988Self-locking nuts$165.00
- GB/T 939-1988Boots for self-locking nuts, single lug$165.00
- GB/T 940-1988Boots for self-locking nuts, two lug$165.00
- GB/T 943-1988Procurement specification for self-locking nuts$395.00
- GB/T 944.1-1985Cross recesses for screws$115.00
- GB/T 945-1976Screws, cross recessed, thin raised cheese head$165.00
- GB/T 946-1988Slotted raised cheese head with shoulder$79.00
- GB/T 947-1988Slotted large raised cheese head screws$79.00
- GB/T 948-1988Slotted countersunk head screws with waisted shank$79.00
- GB/T 949-1988Slotted raised countersunk head screws with waisted shank$79.00
- GB/T 950-1986Cross recessed round head wood screws$45.00
- GB/T 951-1986Cross recessed countersunk head wood screws$124.00
- GB/T 952-1986Cross recessed raised countersunk head wood screws$124.00
- GB/T 953-1988Double end studs (clamping type). Product grade C$35.00
- GB/T 954-1986120 degree countersunk head rivets$45.00
- GB/T 955-1987Wave spring washers$79.00
- GB/T 956.1-1987Countersunk external toothed lock washers$65.00
- GB/T 956.2-1987Countersunk serrated external toothed lock washers$65.00
- GB/T 956.3-2017Conical spring washers$85.00
- GB/T 958-1989Geological symbols used for regional geological maps$3,665.00
- GB/T 958-2015Geological legends used for regional geological maps$3,665.00
- GB/T 959.1-1986Specifications for ring. Circlips$95.00
- GB/T 959.1-2017Specifications for retaining rings—Circlips$95.00
- GB/T 959.2-1986Specifications for ring. Round wire snap rings$65.00
- GB/T 959.3-1986Specifications for ring. Cutting rings$65.00
- GB/T 960-1986Grip rings$25.00
- GB/T 961-1988Spacers for self-locking nuts, single lug$165.00
- GB/T 962-1988Spacers for self-locking nuts, twolug$165.00
- GB/T 963-1988Spacers for self-locking nuts, angle$165.00
- GB/T 967-1994Nut taps$85.00
- GB/T 967-2008Nut taps$85.00
- GB/T 968-1994Manufacturing tolerances on the threaded portion of taps$105.00
- GB/T 968-2007Manufacturing tolerances on the threaded of portion taps$105.00
- GB/T 969-1994Technical specifications for taps$109.00
- GB/T 969-2007Technical specification for taps$109.00
- GB/T 970.1-1994The types and dimensions for circular screwing dies$229.00
- GB/T 970.1-2008Circular screwing dies -- Part 1: The types and dimensions for circular screwing dies and die stocks$229.00
- GB/T 970.2-1994Technical specifications for cirular screwing dies$85.00
- GB/T 970.2-2008Circular screwing dies - Part 2: Technical specifications$85.00
- GB/T 970.3-1994Die stocks--interchangeability dimensions$169.00
- GB/T 971-1994Thread rolling cylindrical dies$105.00
- GB/T 971-2008thread rolling cylindrical dies$105.00
- GB/T 972-1994Thread rolling flat dies$105.00
- GB/T 972-2008Thread rolling flat dies$105.00
- GB/T 973-1976Screws,cross recessed,oval head$105.00
- GB/T 974-1976Screws, cross recessed, 120 degree raised countersunk head$165.00
- GB/T 975-1986Pipe type rivets$79.00
- GB/T 983-1995Stainless steel covered electrodes$135.00
- GB/T 983-2012Covered electrodes for manual metal arc welding of stainless and heat-resisting steels$135.00
- GB/T 984-1985Covered electrodes for hardfacing$145.00
- GB/T 984-2001Hard facing electrodes for shielded metal arc welding$315.00
- GB/T 985-1988Basic forms and sizes of weld grooves for gas welding manual arc welding and gas--Shielded arc welding$79.00
- GB/T 985.1-2008Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding$50.00
- GB/T 985.2-2008Recommended joint preparation for submerged arc welding$35.00
- GB/T 985.3-2008Recommended joint preparation for gas-shield arc welding on aluminium and its alloys$95.00
- GB/T 985.4-2008Recommended joint preparation for welding on clad steels$129.00
- GB/T 986-1988Basic forms and sizes of weld grooves for submerged arc welding$79.00
- GB/T 987-1991Rubber--Measurement of vulcanization characteristics with the oscillating disc curemeter$169.00
- GB/T 988-1991Beit conveyor pulleys--Basic parameters and dimensions$169.00
- GB/T 990-1991Belt conveyor iidlers--Basic parameters and dimensions$169.00
- GB/T 997-1981Symbols for types of construction and mounting arrangements of rotating electrical machinery$205.00
- GB/T 997-2003Classification of types of construction and mounting arrangements for rotating electrical machines (IM code)$360.00
- GB/T 997-2008Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)$360.00
- GB/T 997-2022Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines$360.00
- GB/T 999-1988Voltage ratings of D. C electric traction system$150.00
- GB/T 999-2008Voltage ratings of D.C. electric traction system$150.00
- GB/T 999-2021Voltage ratings of DC electric traction system$150.00
- GB/T 1000-2016Dimensions and characteristics of pin insulators of ceramic for high-voltage overhead lines$205.00
- GB/T 1000.2-1988Pin insulators of ceramic material for high voltage overhead lines--Dimensions and characteristics$79.00
- GB/T 1001.1-2003Insulators for overhead lines with a nominal voltage above 1000V- Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria$680.00
- GB/T 1001.1-2021Insulators for overhead lines with a nominal voltage above 1 000V - Part 1: Ceramic or glass insulator units for a. c. systems - Definitions, test methods and acceptance criteria$680.00
- GB/T 1001.2-2010Insulators for overhead lines with a nominal voltage above 1000V -- Part 2: Insulator strings and insulator sets for a.c. systems -- Definitions, test methods and acceptance criteria$165.00
- GB/T 1002-2008Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions$200.00
- GB/T 1002-2021Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions$200.00
- GB/T 1003-1980Types, basic parameters and dimensions of three phase plugs and sockets$10.00
- GB/T 1003-2016Three phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and dimensions$205.00
- GB/T 1006-1967Types, fundamental parameters and dimensions of holders for incandescent lamps$205.00
- GB/T 1007-1976Small hexagon medium thin nuts$165.00
- GB/T 1008-1989General terminology of machining tooling$405.00
- GB/T 1008-2008General terminology of machining tooling$405.00
- GB/T 1009-1978Nuts special technical conditions$165.00
- GB/T 1011-1986Truss head rivets$124.00
- GB/T 1012-1986120 degree oval countersunk rivets$124.00
- GB/T 1013-1986Cone head semi-tubular rivets$124.00
- GB/T 1014-1986Truss head semi-tubular rivets$104.00
- GB/T 1015-1986Countersunk head semi-tubular rivets$104.00
- GB/T 1016-1986Headless rivets$124.00
- GB/T 1017-1978Rivet special technical conditions$165.00
- GB/T 1019-1989General requirements for packings of household electrical appliances$65.00
- GB/T 1019-2008General requirements for the package of household and similar electrical appliances$65.00
- GB/T 1020-1989Test methods for electro-slag remelting furnaces$55.00
- GB/T 1021-1976Lock washers with angular upturn tab perpendicular to the lug$165.00
- GB/T 1022-1976Lock washers with angular upturn tab in line to the lug$165.00
- GB/T 1023-1976Lock washers with angular upturn tab perpendicular to the external tab$165.00
- GB/T 1024-1976Lock washers with angular upturn tab in line to the external tab$165.00
- GB/T 1028-1989Terms, classfication, grade of waste heat in industry and calculating method of quantity of waste heat resources$115.00
- GB/T 1028-2000Terms, classification, grade of waste heat in industry and calculating method of quanity of waste heat resources$115.00
- GB/T 1028-2018Industrial surplus energy resources evaluation methods$115.00
- GB/T 1029-1993Test procedures for three-phase synchronous machines$1,199.00
- GB/T 1029-2005Test procedures for three-phase synchronous machines$1,199.00
- GB/T 1029-2021Test procedures for three-phase synchronous machines$1,199.00
- GB/T 1030-1988Inner sphere washers$169.00
- GB/T 1031-1995Surface ronghness parameters and their values$35.00
- GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values$35.00
- GB/T 1032-1985Test procedure for three-phase induction motors$850.00
- GB/T 1032-2005Three-phase asynchronous motor test methods$850.00
- GB/T 1032-2012Test procedures for three-phase induction motors$850.00
- GB/T 1032-2023Test methods for three-phase asynchronous motors$850.00
- GB/T 1033-1986Test method for density and relative density of plastics$79.00
- GB/T 1033.1-2008Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method$85.00
- GB/T 1033.2-2010Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method$155.00
- GB/T 1033.3-2010Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pycnometer method$105.00
- GB/T 1034-1986Test method for water absorption of plastics$135.00
- GB/T 1034-1998Plastics--Determination of water absorption$135.00
- GB/T 1034-2008Plastics -- Determination of water absorption$135.00
- GB/T 1035-1970Test method for thermostability of plastics (Martin)$165.00
- GB/T 1036-1989Determination for coefficient of linear expansion of plastics$55.00
- GB/T 1036-2008Test method for coefficient of linear thermal expansion of plastics between 30 Celsius and 30 Celsius with a vitreous silica dilatometer$55.00
- GB/T 1037-1988Test method for water vapor transmission of plastic film and sheet. Cup method$150.00
- GB/T 1037-2021Test method for water vapor transmission of plastic film and sheet - Desiccant method and water method$150.00
- GB/T 1038-1970Test method for gas permeability of plastic film$95.00
- GB/T 1038-2000Plastics. Film and sheeting. Determination of gas transmission. Differential-pressure method$95.00
- GB/T 1038.2-2022Plastics - Film and sheeting - Determination of gas-transmission rate - Part 2: Equal-pressure methods$240.00
- GB/T 1039-1992Plastics--General rules for the test method of mechanical properties$169.00
- GB/T 1040-1992Plastics-Determination of tensile properties$169.00
- GB/T 1040.1-2006Plastics - Determination of tensile properties - Part 1: General principles$420.00
- GB/T 1040.1-2018Plastics - Determination of tensile properties - Part 1: General principles$420.00
- GB/T 1040.1-2025Plastics - Determination of tensile properties - Part 1: General principles$420.00
- GB/T 1040.2-2006Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic$225.00
- GB/T 1040.2-2022Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics$225.00
- GB/T 1040.3-2006Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets$25.00
- GB/T 1040.3-2026Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets$210.00
- GB/T 1040.4-2006Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites$75.00
- GB/T 1040.4-2026Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites$450.00
- GB/T 1040.5-2008Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites$75.00
- GB/T 1041-1992Plastics--Determination of compressive properties$195.00
- GB/T 1041-2008Plastics -- Determination of compressive properties$195.00
- GB/T 1043-1993Plastics Determination of charpy impact strength of rigid materials$169.00
- GB/T 1043.1-2008Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test$135.00
- GB/T 1043.2-2018Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test$295.00
- GB/T 1047-1995Nominal size for pipe components$65.00
- GB/T 1047-2005Pipework components - Definition and selection of DN (nominal size)$65.00
- GB/T 1047-2019Pipework components - Definition and selection of nominal size$65.00
- GB/T 1048-1990Nominal pressure for pipe components$75.00
- GB/T 1048-2005Pipework components - Definition and selection of PN$75.00
- GB/T 1048-2019Pipework components - Definition and selection of nominal pressure$75.00
- GB/T 1094.1-2013Power transformers-Part 1: General$710.00
- GB/T 1094.10-2003Power transformers - Part 1 0: Determination of sound levels$650.00
- GB/T 1094.10-2022Power transformers - Part 10: Determination of sound levels$650.00
- GB/T 1094.101-2008Power transformers - Part 10.1: Determination of sound levels - Application guide$455.00
- GB/T 1094.11-2007Power transformers - Part 11: Dry-type transformers$620.00
- GB/T 1094.11-2022Power transformers—Part 11: Dry-type transformers$620.00
- GB/T 1094.12-2013Power transformers -- Part 12: Loading guide for dry-type power transformers$435.00
- GB/T 1094.14-2022Power transformer - Part 14: Liquid-immersed power transformer using high-temperature insulation materials$620.00
- GB/T 1094.15-2020Power transformers - Part 15: Gas-filled power transformers$355.00
- GB/T 1094.16-2013Power transformers - Part 16: Transformers for wind turbine applications$390.00
- GB/T 1094.16-2025Power transformers - Part 16: Transformers for wind turbine applications$390.00
- GB/T 1094.18-2016Power transformers -- Part 18: Measurement of frequency response$510.00
- GB/T 1094.23-2019Power transformers -- Part 23: DC magnetic bias suppression devices$520.00
- GB/T 1094.3-2003Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air$470.00
- GB/T 1094.3-2017Power transformers -- Part 3: Insulation levels, dielectric tests and external clearances in air$470.00
- GB/T 1094.4-2005Power transformers -- Part 4: Guide to the lightning impulse and switching impulse testing -- Power transformers and reactors$385.00
- GB/T 1094.6-2011Power transformers -- Part 6: Reactors$1,400.00
- GB/T 1094.7-2008Power transformers - Part 7: Loading guide for oil-immersed power transformers$235.00
- GB/T 1094.7-2024Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers$1,100.00
- GB/T 1095-1979Parallel keys--Dimensions of cross sections and keyways$85.00
- GB/T 1095-2003Square and Rectangular keyways$85.00
- GB/T 1096-1979Plain parallel keys--Types and dimensions$55.00
- GB/T 1096-2003Square and rectangular keys$55.00
- GB/T 1097-1979Feather keys--Types and dimensions$40.00
- GB/T 1097-2003Square and rectangular keys$40.00
- GB/T 1098-1979Semi-circular (Woodruff) keys--Dimensions of cross sections and keyways$100.00
- GB/T 1098-2003Woodruff keyways$100.00
- GB/T 1099.1-2003Woodruff keys -- Normal form$85.00
- GB/T 1103.3-2005Cotton - Naturally coloured upland cotton$255.00
- GB/T 1103.3-2024Cotton - Part 3:Natural color upland cotton$255.00
- GB/T 1109-1985End mills with short morse taper shank$79.00
- GB/T 1109-2004End mills with shot Morse taper shank$165.00
- GB/T 1112-2012Slot drills$145.00
- GB/T 1112.1-1997Slot drills$169.00
- GB/T 1112.2-1997Slot drills. Part 2: Milling cutters with Morse taper shanks. Dimensions$169.00
- GB/T 1112.3-1997Slot drills. Part 3: Technical specifications$169.00
- GB/T 1114-2016Shell end mills$85.00
- GB/T 1114.1-1998Shell end mills. Part 1: Dimensions$169.00
- GB/T 1114.2-1998Shell end mills. Part 2: Tachnical specifications$169.00
- GB/T 1115-1985Cylindrical cutters$169.00
- GB/T 1115-2022Cylindrical cutters$150.00
- GB/T 1115.1-2002Cylindrical cutters - Part 1: The types and dimensions$85.00
- GB/T 1115.2-2002Cylindrical cutters - Part 2: The technical specifications$85.00
- GB/T 1117-1985Side and face milling cutter with straight teeth$79.00
- GB/T 1118-1985Side and face milling cutters with double alternate helix$79.00
- GB/T 1119.1-2002Flat relived tooth slotting cutters -- Part 1: The types and dimensions$85.00
- GB/T 1119.2-2002Flat relieved tooth slotting cutters--Part 2:The technical specifications$85.00
- GB/T 1124.1-1996Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters$109.00
- GB/T 1124.1-2007Convex and concave milling cutters -- Part 1: The types and dimensions$109.00
- GB/T 1124.2-1996Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters$109.00
- GB/T 1124.2-2007Convex and concave milling cutters - Part 2: Technical specifications$109.00
- GB/T 1124.3-1996Convex and concave milling cutters technical specifications$169.00
- GB/T 1127-1997Cutters for woodruff keyseats$225.00
- GB/T 1127-2007Woodruff key seat cutters$225.00
- GB/T 1127-2023Woodruff keyseat cutters$225.00
- GB/T 1131-1984Hand reamers$79.00
- GB/T 1131.1-2004Hand reamers -- Part 1: Types and dimensions$140.00
- GB/T 1131.2-2004Hand reamers--Part 2:Technical conditions$84.00
- GB/T 1132-1984Machine reamers with parallel shanks$145.00
- GB/T 1132-2004Machine chucking reamers with parallel shanks or Morse taper shanks$145.00
- GB/T 1132-2017Machine chucking reamers with cylindrical shanks and Morse taper shanks$145.00
- GB/T 1133-1984Machine reamers with Morse taper shanks$79.00
- GB/T 1134-1984Machine reamers with edge inclination Morse taper shanks$145.00
- GB/T 1134-2004Machine reamers with edge inclination with Morse taper shanks$145.00
- GB/T 1134-2008Machine reamers with edge inclination$145.00
- GB/T 1135-1984Shell machine reamers$215.00
- GB/T 1135-2004Shell machine reamers and arbors$215.00
- GB/T 1139-1984Morse and metric taper reamers with parallel shanks$95.00
- GB/T 1139-2004Morse and metric taper reamers$95.00
- GB/T 1139-2017Morse and metric taper reamers$95.00
- GB/T 1140-1984Morse and metric taper reamers with Morse taper shanks$79.00
- GB/T 1141-1984Core drills with Morse taper shanks$79.00
- GB/T 1142-1984Shell drills$145.00
- GB/T 1142-2004Shell drill$145.00
- GB/T 1143-1984Countersinks with Morse taper shanks for angles 60, 90 and 120 degree inclusive$65.00
- GB/T 1143-2004Morse taper shank countersinks for angles 60-degreeand 90-degree, 120-degreeinclusive$65.00
- GB/T 1144-1987Straight-sided spline--Dimensions, tolerances and verification$85.00
- GB/T 1144-2001Straight-sided spline - Dimensions, tolerances and verification$105.00
- GB/T 1146-1989Level$225.00
- GB/T 1146-2009Bubble$225.00
- GB/T 1147-1987Small and medium power internal combustion engines - Part 1: General technical specifications$414.00
- GB/T 1147.1-2007Small and medium power internal combustion engines - Part 1: General requirements$360.00
- GB/T 1147.1-2017Small and medium power internal combustion engines - Part 1: General requirements [including 2018XG1]$360.00
- GB/T 1147.1-2025Small and medium power internal combustion engines - Part 1: General technical specifications$360.00
- GB/T 1147.2-2007Small and medium power internal combustion engines - Part 2: Test methods$500.00
- GB/T 1147.2-2017Small and medium power internal combustion engines - Part 2: Test methods$500.00
- GB/T 1147.2-2025Small and medium power internal combustion engines - Part 2:Test methods$500.00
- GB/T 1148-1993Aluminium piston. Reciprocating internal combustionengines. Technical specifications$470.00
- GB/T 1148-2010Internal combustion engines - Aluminium pistons - Specifications$115.00
- GB/T 1148-2024Internal combustion engines - Aluminium pistons$470.00
- GB/T 1149.1-1994Internal combustion engines--Piston rings--General specifications$265.00
- GB/T 1149.1-2008Internal combustion engines -- Piston rings -- Part 1: General specifications$265.00
- GB/T 1149.10-2013Internal combustion engines -- Piston rings -- Part 10: Keystone rings made of steel$435.00
- GB/T 1149.11-2010Internal combustion engines - Piston rings - Part 11: Half keystone rings made of cast iron$420.00
- GB/T 1149.11-2023Internal combustion engines - Piston rings - Part 11: Half keystone rings made of cast iron$420.00
- GB/T 1149.12-2013Internal combustion engines - Piston rings - Part 12: Half keystone rings made of steel$420.00
- GB/T 1149.12-2023Internal combustion engines - Piston rings - Part 12: Half keystone rings made of steel$420.00
- GB/T 1149.13-2008Internal combustion engines -- Piston rings -- Part 13: Oil control rings$175.00
- GB/T 1149.14-2008Internal combustion engines -- Piston rings -- Part 14: Coil-spring-loaded oil control rings$710.00
- GB/T 1149.15-2017Internal combustion engines -- Piston rings -- Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron$415.00
- GB/T 1149.16-2015Internal combustion engines -- Piston rings -- Part 16: Expander/segment oil-control rings$235.00
- GB/T 1149.17-2023Internal combustion engines - Piston rings - Part 17: Coil-spring-loaded oil control rings made of steel$455.00
- GB/T 1149.2-1994Internal combustion engines--Piston rings--Vocabulary$315.00
- GB/T 1149.2-2010Internal combustion engines -- Piston rings -- Part 2: Vocabulary$315.00
- GB/T 1149.3-1992Internal combustion engines. Piston rings. Scraper rings$65.00
- GB/T 1149.3-2010Internal combustion engines -- Piston rings -- Part 3: Material specifications$65.00
- GB/T 1149.4-1994Internal combustion engines--Piston rings--Quality requirements$270.00
- GB/T 1149.4-2008Internal combustion engines - Piston rings - Part 4: Quality requirements$270.00
- GB/T 1149.4-2021Internal combustion engines - Piston rings - Part 4: Quality requirements$270.00
- GB/T 1149.5-1992Internal combustion engines. Piston rings. Oil control rings$265.00
- GB/T 1149.5-2008Internal combustion engines -- Piston rings -- Part 5: Inspection measuring principles$265.00
- GB/T 1149.6-1994Internal combustion engines--Piston rings--Inspection measuring principles$465.00
- GB/T 1149.6-2008Internal combustion engines - Piston rings - Part 6: Scraper rings made of cast iron$465.00
- GB/T 1149.6-2021Internal combustion engines - Piston rings - Part 6: Scraper rings made of cast iron$465.00
- GB/T 1149.7-1994Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings$405.00
- GB/T 1149.7-2010Internal combustion engines -- Piston rings -- Part 7: Rectangular rings made of cast iron$405.00
- GB/T 1149.8-2008Internal combustion engines - Piston rings - Part 8: Rectangular rings made of steel$390.00
- GB/T 1149.8-2022Internal combustion engines - Piston rings - Part 8: Rectangular rings made of steel$390.00
- GB/T 1149.9-2008Internal combustion engines -- Piston rings -- Part 9: Keystone rings made of cast iron$315.00
- GB/T 1150-1993Internal combustion engines-Cait iron wet type cylin-der liner-Specification$155.00
- GB/T 1150-2010Internal combustion engines - Cast iron wet cylinder liners - Specifications$155.00
- GB/T 1151-1993Internal combustion engines. Main and connecting bearings. Specification$240.00
- GB/T 1151-2012Internal combustion engines - Main and connecting rod bearings - Specifications$240.00
- GB/T 1151-2023Internal combustion engines - Main and connecting rod bearings - Specifications$240.00
- GB/T 1156-1979Sleeve type drip-feed lubricating cups--Types and dimensions$85.00
- GB/T 1156-2011Sleeve type drip-feed lubricating cups$85.00
- GB/T 1167-1996The threads for transition fit$105.00
- GB/T 1168-1976Studs--Technical requirements$165.00
- GB/T 1171-1996Classical V-belts for general use$125.00
- GB/T 1171-2006Classical V-belt for general drive$125.00
- GB/T 1171-2017Classical V-belt for general drive$125.00
- GB/T 1172-1974Conversion table of hardness and tensile strength of ferrous metals$135.00
- GB/T 1172-1999Conversion of hardness and strength for ferrous metal$135.00
- GB/T 1173-1995Casting aluminium alloys$75.00
- GB/T 1173-2013Casting aluminum alloy$75.00
- GB/T 1174-1992Cast bearing metals$270.00
- GB/T 1174-2022Cast bearing alloy$270.00
- GB/T 1175-1974Cast zinc alloys$95.00
- GB/T 1175-1997Casting zinc alloys$95.00
- GB/T 1175-2018Casting zinc alloys$95.00
- GB/T 1176-1987Specification for cast copper alloys$75.00
- GB/T 1176-2013Casting copper and copper alloys$75.00
- GB/T 1177-1991Casting magnesium alloys$125.00
- GB/T 1177-2018Casting magnesium alloys$125.00
- GB/T 1179-1983Aluminium stranded conductors and aluminium conductors, steel-reinforced$830.00
- GB/T 1179-1999Round wire concentric lay overhead electrical stranded conductors$830.00
- GB/T 1179-2008Round wire concentric lay overhead electrical stranded conductors$830.00
- GB/T 1179-2017Round wire concentric lay overhead electrical stranded conductors$830.00
- GB/T 1181-1974Screw threads, interference fits, for mating threads in aluminum$85.00
- GB/T 1181-1998The interference-fit threads$85.00
- GB/T 1182-1996Geometrical tolerancing--Generalities, definitions, indications on drawings$1,390.00
- GB/T 1182-2008Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out$1,390.00
- GB/T 1182-2018Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out$1,390.00
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications$75.00
- GB/T 1185-1989Surface Imperfections of optical elements$315.00
- GB/T 1185-2006Surface imperfections of optical elements$315.00
- GB/T 1186-1992Rubber hose for compressed air (up to 2. 5 MPa)$145.00
- GB/T 1186-2007Rubber hose, textile-reinforced, for compressed air - Specification$145.00
- GB/T 1186-2016Rubber hoses, textile-reinforced, for compressed air -- Specification$145.00
- GB/T 1190-1991Off-the-road tyres$85.00
- GB/T 1190-2001Technical specification of earth-mover tyres$85.00
- GB/T 1190-2009Technical specification of earth-mover tyres$85.00
- GB/T 1190-2018Technical specification of earth-mover tyres$85.00
- GB/T 1192-1991Agricultural tyres$65.00
- GB/T 1192-1999Agricultural tyres$65.00
- GB/T 1192-2008Technical specification of agricultural tyres$65.00
- GB/T 1192-2017Technical specification of agricultural tyres$65.00
- GB/T 1196-1993Unalloyed aluminium ingots for remelting$135.00
- GB/T 1196-2002Unalloyed aluminium ingots for remelting$135.00
- GB/T 1196-2008Unalloyed aluminium ingots for remelting$135.00
- GB/T 1196-2017Unalloyed aluminium ingots for remelting$135.00
- GB/T 1196-2023Unalloyed aluminium ingots for remelting$135.00
- GB/T 1197-1975Unalloyed aluminum ingots for wires$165.00
- GB/T 1198-1975Methods for chemical analysis of aluminum$165.00
- GB/T 1202-1987Crude scale paraffin wax$120.00
- GB/T 1202-2016Scale paraffin wax$120.00
- GB/T 1202-2025Scale paraffin wax$120.00
- GB/T 1204-1975Chamfers for optical parts$165.00
- GB/T 1205-1975Minimum thicknesses in rim and centre of lens$165.00
- GB/T 1209-1986Cutter bars for agricultural machinery$145.00
- GB/T 1209-2002Agricultural machinery -- Cutter bars -- Part 1: Assembly$145.00
- GB/T 1209.1-2009Agricultural machinery - Cutter bars - Part 1: Assembly$225.00
- GB/T 1209.2-2009Agricultural machinery - Cutter bars - Part 2:Guard$165.00
- GB/T 1209.3-2009Agricultural machinery - Cutter bars - Part 3:Knife sections, ledger plates and knife backs$135.00
- GB/T 1209.4-2009Agricultural machinery - Cutter bars - Part 4: Knife clips$165.00
- GB/T 1209.5-2009Agricultural machinery - Cutter bars - Part 5: Wearing plates$125.00
- GB/T 1214.1-1996The specification for callipers of vernier type$169.00
- GB/T 1214.2-1996The vernier callipers for callipers of vernier type$169.00
- GB/T 1214.3-1996The high gauge for callipers of vernier type$169.00
- GB/T 1214.4-1996The depth gauge for callipers of vernier type$169.00
- GB/T 1216-1985Micrometers$125.00
- GB/T 1216-2004External micrometer$125.00
- GB/T 1216-2018External micrometer$125.00
- GB/T 1217-1986Gear tooth micrometers$150.00
- GB/T 1217-2004Micrometer for measuring root tangent lengths of gear teeth$150.00
- GB/T 1217-2022Micrometer for measuring root tangent lengths of gear teeth$150.00
- GB/T 1218-1987Depth micrometers$145.00
- GB/T 1218-2004Depth micrometer$145.00
- GB/T 1218-2018Depth micrometer$145.00
- GB/T 1219-1985Dial gauges$105.00
- GB/T 1219-2000Geometrical product specification-Dimensional measuring instruments: Dial gauges-Design and metrological requirements$105.00
- GB/T 1219-2008Dial gauges$105.00
- GB/T 1220-1992Stainless steel bars$105.00
- GB/T 1220-2007Stainless steel bars$105.00
- GB/T 1221-1992Heat-resisting steel bars$125.00
- GB/T 1221-2007Heat-resistant steel bars$125.00
- GB/T 1222-1984Spring steels$365.00
- GB/T 1222-2007Spring steels$365.00
- GB/T 1222-2016Spring Steels$125.00
- GB/T 1222-2025Spring Steels$365.00
- GB/T 1224-1976General terms and signs for geometrical optics$540.00
- GB/T 1224-1999Vocabulary and character for geometrical optics$540.00
- GB/T 1224-2016Vocabulary and character for geometrical optics$540.00
- GB/T 1226-1986General pressure gauges$255.00
- GB/T 1226-2001General pressure gauge$235.00
- GB/T 1226-2010General pressure gauge$235.00
- GB/T 1226-2017General pressure gauge$235.00
- GB/T 1227-1986Accurate pressure gauges$165.00
- GB/T 1227-2002Accurate pressure gauge$205.00
- GB/T 1227-2010Accurate pressure gauge$205.00
- GB/T 1227-2017Accurate pressure gauge$205.00
- GB/T 1228-1991High strength bolts with large hexagon head for steel structures$35.00
- GB/T 1228-2006High strength bolts with large hexagon head for steel structures$35.00
- GB/T 1229-1991High strength large hexagon nuts for steel structures$55.00
- GB/T 1229-2006High strength large hexagon nuts for steel structures$55.00
- GB/T 1230-1991High strength plain washers for steel structures$55.00
- GB/T 1230-2006High strength plain washers for steel structures$55.00
- GB/T 1231-1991Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures$315.00
- GB/T 1231-2006Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures$315.00
- GB/T 1231-2024High strength bolts with large hexagon head assemblies for steel structures$315.00
- GB/T 1232.1-2000Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of mooney viscosity$215.00
- GB/T 1232.1-2016Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity$215.00
- GB/T 1232.2-2025Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2: Determinations of pre-vulcanization characteristics$255.00
- GB/T 1232.3-2021Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR$95.00
- GB/T 1232.4-2017Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate$125.00
- GB/T 1233-1992Rubber, unvulcanized--Determination of prevulcanization characteristics--Shearing disk method$105.00
- GB/T 1233-2008Rubber, unvulcanized -- Determinations of pre-vulcanization characteristic using a shearing disc viscometer$105.00
- GB/T 1234-1995High resistance alloys for electrical heating$255.00
- GB/T 1234-2012High resistance alloys for electrical heating$255.00
- GB/T 1236-1985Test methods of aerodynamic performance for fans$2,550.00
- GB/T 1236-2000Industrial fans. Performance testing using standardized airways$2,550.00
- GB/T 1236-2017Industrial fan -- Performance testing using standardized airways$2,550.00
- GB/T 1237-1988Designation system for fasteners$55.00
- GB/T 1237-2000Designation system for fasteners$55.00
- GB/T 1239.1-1989Cold coiled helical tension springs--Technical specifications$135.00
- GB/T 1239.1-2009Cold coiled helical springs - Technical specifications - Part 1: Extension springs$135.00
- GB/T 1239.2-1989Cold coiled helical compressions springs - Technical specifications$85.00
- GB/T 1239.2-2009Cold coiled helical springs technical specifications - Part 2: Compressions spring$85.00
- GB/T 1239.3-1989Cold coiled helical torsion springs--Technical specifications$135.00
- GB/T 1239.3-2009Cold coiled helical springs technical specifiations - Part 3: Torsion spring$135.00
- GB/T 1239.4-1989Hot coiled helical springs--Technical specifications$79.00
- GB/T 1239.6-1992Design of helical springs$169.00
- GB/T 1240-1976Photo-templates gauge$249.00
- GB/T 1241-1983Marine forged steel male thread stop and check valves$35.00
- GB/T 1241-2008Marine forged steel male thread stop-check valves$35.00
- GB/T 1242-1989Panel-mounted electrical indicating and measuring instruments--Boundary and mounting dimensions$105.00
- GB/T 1242-2000Dimensions for panel mounted indicating and recording electrical measuring instruments$105.00
- GB/T 1243-1997Short pitch transmission precision roller chains and chain wheels$510.00
- GB/T 1243-2006Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets$510.00
- GB/T 1243-2024Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets$510.00
- GB/T 1246-1976Railway turn out number series$169.00
- GB/T 1250-1989Rules for expression and judgement of limiting values$79.00
- GB/T 1251.1-2008Ergonomics -- Danger signals for public and work areas -- Auditory danger$235.00
- GB/T 1251.2-2006Ergonomics -- Visual danger signals -- General requirements design and testing$105.00
- GB/T 1251.3-2008Ergonomics -- System of auditory and visual danger and information signals$145.00
- GB/T 1252-1989Graphical symbols--Arrows and their use$79.00
- GB/T 1263-1986Chemical reagents--Disodium hydrogen phosphate dodecahydrote$125.00
- GB/T 1263-2006Chemical reagents -- Disodium hydrogen phosphate dodecahydrate$125.00
- GB/T 1264-1984Chemical reagent--Sodium fluoride$85.00
- GB/T 1264-1997Chemical reagent--Sodium fluoride$85.00
- GB/T 1265-1977Chemical reagents--Sodium bromide$145.00
- GB/T 1265-2003Chemical reagent--Sodium bromide$145.00
- GB/T 1266-1986Chemical reagents--Sodium chloride$105.00
- GB/T 1266-2006Chemical reagents -- Sodium chloride$105.00
- GB/T 1267-1977Chemical reagents--Sodium dihydrogen phosphate$145.00
- GB/T 1267-1999Chemical reagent-- Sodium dihydrogen phosphate, dihydrate$145.00
- GB/T 1267-2011Chemical reagent - Sodium dihydrogen phosphate dihydrate$145.00
- GB/T 1268-1984Chemical reagent--Sodium thiocyanate$125.00
- GB/T 1268-1998Chemical reagent. Sodium thiocyanate$125.00
- GB/T 1270-1996Chemical reagent. Cobalt (Ⅲ) chloride hexahydrate$150.00
- GB/T 1270-2023Chemical reagent—Cobalt(II) chloride hexahydrate$150.00
- GB/T 1271-1994Chemical reagent. Potassium fluoride dihydrate$135.00
- GB/T 1271-2011Chemical reagent - Potassium fluoride dihydrate$135.00
- GB/T 1272-1988Chemical reagent--Potassium iodide$165.00
- GB/T 1272-2007Chemical reagent -- Potassium iodide$165.00
- GB/T 1273-1988Chemical reagent--Potassium hexacyanoferrate (2) trihydrate$85.00
- GB/T 1273-2008Chemical reagent -- Potassium hexacyanoferrate (��) trihydrate$85.00
- GB/T 1274-1993Chemical reagents. Potassium dihydrogen phosphate$85.00
- GB/T 1274-2011Chemical reagents -- Potassium dihydrogen phosphate$85.00
- GB/T 1275-1994Chemical reagent. Aluminium potassium sulfate dodecahydrate$169.00
- GB/T 1276-1984Chemical reagent--Ammonium fluoride$125.00
- GB/T 1276-1999Chemical reagent. Ammonium fluoride$125.00
- GB/T 1277-1994Chemical reagent. Ammonium bromide$169.00
- GB/T 1278-1994Chemical reagent.Ammonium hydrogen difluoride$109.00
- GB/T 1279-1989Chemical reagent--Ammonium iron (3) sulfate dodecahydrate$125.00
- GB/T 1279-2008Chemical reagent -- Ammonium iron (��) sulfate dodecahydrate$125.00
- GB/T 1281-1993Chemical reagents. Bromine$85.00
- GB/T 1281-2011Chemical reagent -- Bromine$85.00
- GB/T 1282-1996Chemical reagent. Phosphoric acid$95.00
- GB/T 1282-2013Chemical reagent -- Phosphoric acid$95.00
- GB/T 1285-1994Chemical reagent--Cadmium chloride$125.00
- GB/T 1287-1994Chemical reagent. Nickel sulfate hexahydrate$169.00
- GB/T 1288-1992Chemical reagent--Potassium sodium tartrate tetrahydrate$255.00
- GB/T 1288-2011Chemical reagent - Potassium sodium tartrate tetrahydrate$255.00
- GB/T 1288-2024Chemical reagent - Potassium sodium tartrate tetrahydrate$255.00
- GB/T 1289-1994Chemical reagent. Sodium oxalate$105.00
- GB/T 1289-2022Chemical reagent - Sodium oxalate$105.00
- GB/T 1291-1988Chemical reagent--Potassium hydrogen phthalate$85.00
- GB/T 1291-2008Chemical reagent -- Potassium hydrogen phthalate$85.00
- GB/T 1292-1986Chemical reagents--Ammonium acetate$125.00
- GB/T 1292-2008Chemical reagent -- Ammonium acetate$125.00
- GB/T 1293-1989Chemical reagent--1, 10-Phenanthroline$79.00
- GB/T 1294-1993Chemical reagents. Tartaric acid$105.00
- GB/T 1294-2008Chemical reagent -- L(+)-Tartaric acid$105.00
- GB/T 1295-1993Chemical reagent. DL-Alanine$169.00
- GB/T 1296-1992Chemical reagent L-Cystine$169.00
- GB/T 1297-1993Chemical reagent. L-cysteine hydrochloride anhydrous$169.00
- GB/T 1298-1986Carbon tool steels--Technical requirements$85.00
- GB/T 1298-2008Carbon tool steels$85.00
- GB/T 1299-1985Alloy tool steels--Technical requirements$815.00
- GB/T 1299-2000Alloy tool steels$815.00
- GB/T 1299-2014Tool and mould steels$815.00
- GB/T 1299-2025Tool and mould steels$815.00
- GB/T 1301-1994Rock drilling equipment. Hollow drill steels in bar form$255.00
- GB/T 1301-2008Hollow drill steels for rock drilling$145.00
- GB/T 1301-2025Hollow drill steels for rock drilling$255.00
- GB/T 1303-1977Industrial rigid laminated sheets based on thermosetting reins for electrical purposes -- Part 1: Definitions, designations and general requirements$129.00
All GB/T ranges
- GB/T 1.1-1993 – GB/T 245-2016
- GB/T 246-1982 – GB/T 601-2002
- GB/T 601-2016 – GB/T 915-1995
- GB/T 915-2010 – GB/T 1303-1977
- GB/T 1303.1-1998 – GB/T 1617-1989
- GB/T 1617-2002 – GB/T 1927.9-2021
- GB/T 1928-1991 – GB/T 2399-2003
- GB/T 2399-2014 – GB/T 2590.6-1981
- GB/T 2590.7-1981 – GB/T 2900.17-1994
- GB/T 2900.17-2009 – GB/T 3048.4-1994
- GB/T 3048.4-2007 – GB/T 3280-1992
- GB/T 3280-2007 – GB/T 3533.2-1984
- GB/T 3533.2-2017 – GB/T 3789.14-1991
- GB/T 3789.15-1991 – GB/T 3903.6-2017
- GB/T 3903.6-2024 – GB/T 4148-1993
- GB/T 4148-2003 – GB/T 4334-2008
- GB/T 4334-2020 – GB/T 4649-2008
- GB/T 4649-2018 – GB/T 4752-1984
- GB/T 4752-2002 – GB/T 4955-1997
- GB/T 4955-2005 – GB/T 5033-1985
- GB/T 5034-1985 – GB/T 5169.8-1985
- GB/T 5169.9-1993 – GB/T 5340.3-2006
- GB/T 5341-1985 – GB/T 5585.1-2005
- GB/T 5585.1-2018 – GB/T 5824-2008
- GB/T 5824-2021 – GB/T 6102.2-1985
- GB/T 6102.2-2009 – GB/T 6323.4-1994
- GB/T 6323.5-1994 – GB/T 6553-2014
- GB/T 6553-2024 – GB/T 6742-2007
- GB/T 6743-1986 – GB/T 6988.6-1993
- GB/T 6989-1986 – GB/T 7284-1998
- GB/T 7284-2016 – GB/T 7596-2000
- GB/T 7596-2008 – GB/T 7739.6-2021
- GB/T 7739.7-2007 – GB/T 8059.2-1987
- GB/T 8059.2-1995 – GB/T 8303-1987
- GB/T 8303-2002 – GB/T 8638.1-1988
- GB/T 8638.10-1988 – GB/T 8995-2026
- GB/T 8996-1988 – GB/T 9275-1988
- GB/T 9275-2008 – GB/T 9652.1-1997
- GB/T 9652.1-2007 – GB/T 9938-2013
- GB/T 9941-1988 – GB/T 10178-1988
- GB/T 10178-2006 – GB/T 10512-1989
- GB/T 10512-2008 – GB/T 10870-1989
- GB/T 10870-2001 – GB/T 11168-2009
- GB/T 11170-1989 – GB/T 11464-2013
- GB/T 11465-1989 – GB/T 11896-1989
- GB/T 11897-1989 – GB/T 12196-1990
- GB/T 12197-1990 – GB/T 12510-2015
- GB/T 12511-1990 – GB/T 12690.6-2017
- GB/T 12690.7-1990 – GB/T 12959-2008
- GB/T 12959-2024 – GB/T 13210-2024
- GB/T 13211-1991 – GB/T 13459-1992
- GB/T 13459-2008 – GB/T 13663.2-2018
- GB/T 13663.3-2018 – GB/T 13869-2008
- GB/T 13869-2017 – GB/T 14074.2-1993
- GB/T 14074.3-1993 – GB/T 14328.4-1993
- GB/T 14329-2008 – GB/T 14506.15-1993
- GB/T 14506.15-2010 – GB/T 14684-2011
- GB/T 14684-2022 – GB/T 14926.21-1994
- GB/T 14926.21-2001 – GB/T 15079.3-1994
- GB/T 15079.4-1994 – GB/T 15328-1994
- GB/T 15328-2009 – GB/T 15590-1995
- GB/T 15590-2008 – GB/T 15806-1995
- GB/T 15806-2006 – GB/T 16085-1995
- GB/T 16086-1995 – GB/T 16478.4-1996
- GB/T 16478.5-1996 – GB/T 16674.2-2016
- GB/T 16674.3-2023 – GB/T 16895.1-2008
- GB/T 16895.10-2001 – GB/T 17149.4-1997
- GB/T 17149.5-1997 – GB/T 17367-1998
- GB/T 17368-1998 – GB/T 17607-1998
- GB/T 17608-1998 – GB/T 17783-1999
- GB/T 17783-2019 – GB/T 17980.143-2004
- GB/T 17980.144-2004 – GB/T 18122-2000
- GB/T 18123-2000 – GB/T 18311.2-2026
- GB/T 18311.20-2007 – GB/T 18508-2001
- GB/T 18508-2014 – GB/T 18779.3-2023
- GB/T 18779.4-2020 – GB/T 18932.11-2002
- GB/T 18932.12-2002 – GB/T 19208-2003
- GB/T 19208-2008 – GB/T 19449.4-2013
- GB/T 19450-2004 – GB/T 19699-2023
- GB/T 19700-2005 – GB/T 19952-2005
- GB/T 19953-2005 – GB/T 20168-2006
- GB/T 20168-2017 – GB/T 20443-2006
- GB/T 20444-2006 – GB/T 20736-2006
- GB/T 20736-2025 – GB/T 20975.15-2008
- GB/T 20975.15-2020 – GB/T 21283.5-2008
- GB/T 21283.6-2015 – GB/T 21623-2008
- GB/T 21624-2008 – GB/T 21930-2008
- GB/T 21931.1-2008 – GB/T 22260-2023
- GB/T 22261-2008 – GB/T 22527-2008
- GB/T 22528-2008 – GB/T 22838.2-2009
- GB/T 22838.3-2009 – GB/T 23274.7-2009
- GB/T 23274.8-2009 – GB/T 23576-2024
- GB/T 23577-2009 – GB/T 23901.1-2009
- GB/T 23901.1-2019 – GB/T 24301-2009
- GB/T 24302-2009 – GB/T 24639-2009
- GB/T 24640-2009 – GB/T 24975.3-2010
- GB/T 24975.4-2010 – GB/T 25271-2010
- GB/T 25272-2010 – GB/T 25707-2010
- GB/T 25707-2025 – GB/T 26052-2010
- GB/T 26052-2022 – GB/T 26412-2010
- GB/T 26413-2010 – GB/T 26803.1-2011
- GB/T 26803.2-2011 – GB/T 27534.2-2025
- GB/T 27534.3-2011 – GB/T 27919-2011
- GB/T 27920.1-2011 – GB/T 28410-2012
- GB/T 28410-2025 – GB/T 28819-2023
- GB/T 28821-2012 – GB/T 29229-2012
- GB/T 29230.1-2012 – GB/T 29618.1-2013
- GB/T 29618.1-2017 – GB/T 30095-2013
- GB/T 30096-2013 – GB/T 30420.1-2013
- GB/T 30420.2-2019 – GB/T 30845.2-2021
- GB/T 30846-2014 – GB/T 31230.3-2014
- GB/T 31230.4-2014 – GB/T 31586.2-2015
- GB/T 31587-2015 – GB/T 32065.8-2020
- GB/T 32065.9-2019 – GB/T 32413-2015
- GB/T 32414-2015 – GB/T 32800.5-2023
- GB/T 32800.6-2023 – GB/T 33162-2016
- GB/T 33163-2016 – GB/T 33525-2025
- GB/T 33526-2017 – GB/T 33887-2017
- GB/T 33888-2017 – GB/T 34308.2-2017
- GB/T 34308.3-2017 – GB/T 34690.7-2017
- GB/T 34690.8-2017 – GB/T 35111-2017
- GB/T 35112-2017 – GB/T 35521-2017
- GB/T 35522-2017 – GB/T 35966-2018
- GB/T 35967-2018 – GB/T 36410.4-2018
- GB/T 36410.5-2018 – GB/T 36818-2018
- GB/T 36819-2018 – GB/T 37270.2-2018
- GB/T 37270.3-2018 – GB/T 37721-2019
- GB/T 37722-2019 – GB/T 38136-2019
- GB/T 38137-2019 – GB/T 38593-2020
- GB/T 38594-2020 – GB/T 39039-2020
- GB/T 39040-2020 – GB/T 39493-2020
- GB/T 39494-2020 – GB/T 39914-2021
- GB/T 39915-2021 – GB/T 40392-2021
- GB/T 40393-2021 – GB/T 40837-2021
- GB/T 40838-2021 – GB/T 41329-2022
- GB/T 41330-2022 – GB/T 41805-2022
- GB/T 41806-2022 – GB/T 42272-2022
- GB/T 42273-2022 – GB/T 42890-2023
- GB/T 42891-2023 – GB/T 43448-2023
- GB/T 43449-2023 – GB/T 44014-2024
- GB/T 44020-2024 – GB/T 44596-2024
- GB/T 44597-2024 – GB/T 45169-2025
- GB/T 45170-2024 – GB/T 45677-2025
- GB/T 45678-2025 – GB/T 46128-2025
- GB/T 46129-2025 – GB/T 46594-2026
- GB/T 46595-2025 – GB/T 47055-2026
- GB/T 47056-2026 – GB/T 47534-2026
- GB/T 47535-2026 – GB/T 48000.3-2026
- GB/T 48000.4-2026 – GB/T 48446-2026
- GB/T 48447-2026 – GB/T 51013-2014
- GB/T 51015-2014 – GB/T 30685-2024
- GB/T 30819-2024 – GB/T 43746.3-2024
- GB/T 43753.1-2024 – GB/T 9914.2-2013