GB/T 1149.16-2015Internal combustion engines -- Piston rings -- Part 16: Expander/segment oil-control rings (English PDF)
内燃机 活塞环 第16部分:钢带组合油环
This is a limited preview
Buy now to download the full PDF (10 pages)
Need quotation for your management?
Get a formal quotation for GB/T 1149.16-2015 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
July 1, 2016
Scope
GB/T 1149.16-2015 is the English-translated version of 内燃机 活塞环 第16部分:钢带组合油环.
GB/T 1149.16-2015 — This section GB/T 1149 specifies the basic dimensions characteristic strip combination oil ring, does not require the complete product description (as piston rings Different manufacturers, collar structures are different, specific design details as mutually agreed by the manufacturer and the customer).
This section applies to a cylinder diameter from 40mm ~ 125mm steel group of reciprocating internal combustion engines for road vehicles and other purposes with Combined oil ring, piston ring compressor working under similar conditions may also refer to use.
Found what you need?
Document preview — GB/T 1149.16-2015
National Standard of the People's Republic of China
- ICS
- 27.020
- Classification
- J 92
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Symbols and Abbreviations
Foreword
GB/T 1149 "Piston Ring" is divided into 16 parts.
--- Part 1. General rules;
--- Part 2. Terminology;
--- Part 3. Material specifications;
--- Part 4. Quality requirements;
--- Part 5. Test methods;
--- Part 6. Cast wiper;
--- Part 7. rectangular cast iron ring;
--- Part 8. rectangular steel ring;
--- Part 9. trapezoidal cast iron ring;
--- Part 10. trapezoidal steel ring;
--- Part 11. Cast iron wedge ring;
--- Part 12. wedge-shaped steel ring;
--- Part 13. Oil ring;
--- Part 14. Spiral spring supporting oil ring;
--- Part 15. Cast iron spiral stays reed thin oil ring;
--- Part 16. strip combination oil ring.
This section GB/T 1149 Part 16.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 6627:2011 "Piston Ring strip combination oil ring." Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 1149.5-2008 internal combustion engine piston rings - Part 5. Test method (ISO 6621-2:2003, IDT);
--- GB/T 1149.3-2010 Piston Ring Part 3. Material specifications (ISO 6621-3:2000, IDT);
--- GB/T 1149.1-2008 internal combustion engine piston rings - Part 1. General rules (ISO 6621-4:2003, IDT);
--- GB/T 1149.14-2008 Piston Ring Part 14. Spiral spring supporting oil ring (ISO 6626. 1989, IDT).
This part is proposed by China Machinery Industry Federation.
This part of the internal combustion engine by the National Standardization Technical Committee (SAC/TC177) centralized.
1 Scope
This section GB/T 1149 specifies the basic dimensions characteristic strip combination oil ring, does not require the complete product description (as piston rings Different manufacturers, collar structures are different, specific design details as mutually agreed by the manufacturer and the customer).
This section applies to a cylinder diameter from 40mm ~ 125mm steel group of reciprocating internal combustion engines for road vehicles and other purposes with Combined oil ring, piston ring compressor working under similar conditions may also refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 6621-2 Piston Ring Part 2. Test methods (Internalcombustionengines-Pistonrings-Part 2. Inspectionmeasuringprinciples) ISO 6621-3 combustion engine piston rings - Part 3. Material specifications (Internalcombustionengines-Pistonrings-Part 3. Materialspecifications) ISO 6621-4 Piston Ring Part 4. General rules (Internalcombustionengines-Pistonrings-Part 4. Generalspecifications) ISO 6626 Internal Combustion Engine Piston oil ring spiral spring stays (Internalcombustionengines-Pistonrings-Coil-spring-loadedoilcontrolrings)
3 Symbols and Abbreviations
Symbols and abbreviations used in this section are shown in Table 1.
Table 1 Symbols and Abbreviations
Symbols Acronyms Description a1 blade ring radial thickness a8 collar radial thickness between the blade ring a9 collar radial thickness a11 combination ring radial thickness a14 collar boss thickness a combination of ring diameter d1 basic (basic diameter) h1 basic ring ring assembly high h24 blade ring contact surface height
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 6621 · ISO 6626
How to Download GB/T 1149.16-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1149.17-2023 — Internal combustion engines - Piston rings - Part 17: Coil-spring-loaded oil control rings made of steel
GB/T 1149.15-2017 — Internal combustion engines -- Piston rings -- Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron
GB/T 1149.14-2008 — Internal combustion engines -- Piston rings -- Part 14: Coil-spring-loaded oil control rings
GB/T 1149.16-2015
$235.00