GB/T 6113.103-2021Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbances power (English PDF)

Foreword

This document is drafted in accordance with GB/T 1.1-2020 "Directives for

standardization - Part 1: Rules for the structure and drafting of standardizing

documents".

GB/T(Z) 6113 "Specification for radio disturbance and immunity measuring

apparatus and methods" is the basic standard of electromagnetic compatibility.

This document is Part 1-3 of GB/T(Z) 6113. GB/T(Z) 6113 has issued the

following parts:

Part 1: Radio disturbance and immunity measuring apparatus

- Part 1-1: Radio disturbance and immunity measuring apparatus -

Measuring apparatus;

- Part 1-2: Radio disturbance and immunity measuring apparatus -

Coupling devices for conducted disturbance measurements;

- Part 1-3: Radio disturbance and immunity measuring apparatus -

Ancillary equipment - Disturbances power;

- Part 1-4: Radio disturbance and immunity measuring apparatus -

Antennas and test sites for radiated disturbance measurements;

- Part 1-5: Radio disturbance and immunity measuring apparatus -

Antenna calibration sites and reference test sites for 5 MHz to 18 GHz;

- Part 1-6: Radio disturbance and immunity measuring apparatus - EMC

antenna calibration.

Part 2: Methods of measurement of disturbances and immunity

- Part 2-1: Methods of measurement of disturbances and immunity -

Conducted disturbance measurements;

- Part 2-2: Methods of measurement of disturbances and immunity -

Measurement of disturbance power;

- Part 2-3: Methods of measurement of disturbances and immunity -

Radiated disturbance measurements;

- Part 2-4: Methods of measurement of disturbances and immunity -

Immunity measurements;

- Part 2-5: In situ measurements of disturbing emissions produced by

physically large equipment.

Part 3: CISPR technical reports

- Part 3: CISPR technical reports.

Part 4: Uncertainties, statistics and limit modelling

- Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in

standardized EMC tests;

- Part 4-2: Uncertainties, statistics and limit modelling - Measurement

instrumentation uncertainty;

- Part 4-3: Uncertainties, statistics and limit modelling - Statistical

considerations in the determination of EMC compliance of mass-

produced products;

- Part 4-4: Uncertainties, statistics and limit modelling - Statistics of

complaints and a model for the calculation of limits;

- Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the

use of alternative test methods.

This document replaces GB/T 6113.103-2008 "Specification for radio

disturbance and immunity measuring apparatus and methods - Part 1-3: Radio

disturbance and immunity measuring apparatus - Ancillary equipment -

Disturbances power". Compared with GB/T 6113.103-2008, in addition to

structural adjustments and editorial changes, the main technical changes are

as follows:

- Update the normative references (see Clause 2; Clause 2 of the 2008

edition);

- Delete the abbreviation "reference conversion factor" (see 3.2 of the 2008

edition);

- Delete the content related to the "reference device method" (see 4.3 of the

2008 edition);

- Modify Figures B.3 and B.4 (see Annex B; Annex B of the 2008 edition);

- Add Figure B.5b) (see Annex B).

This document, using translation method, is identical to CISPR 16-1-3:2016

"Specification for radio disturbance and immunity measuring apparatus and

methods - Part 1-3: Radio disturbance and immunity measuring apparatus -

Ancillary equipment - Disturbance power".

China's documents which have a consistent correspondence with the

international documents normatively referenced in this document are as follows:

- GB/T 6113.102-2018 Specification for radio disturbance and immunity

measuring apparatus and methods - Part 1-2: Radio disturbance and

immunity measuring apparatus - Coupling devices for conducted

disturbance measurements (CISPR 16-1-2:2014, IDT)

- GB/T 6113.202-2018 Specification for radio disturbance and immunity

measuring apparatus and methods - Part 2-2: Methods of measurement of

disturbances and immunity - Measurement of disturbance power (CISPR

16-2-2:2010, IDT)

- GB/T 6113.402-2018 Specification for radio disturbance and immunity

measuring apparatus and methods - Part 4-2: Uncertainties, statistics and

limit modelling - Measurement instrumentation uncertainty (CISPR 16-4-

2:2014, IDT)

The following editorial change has been made to this document:

- In order to facilitate the reader's citation, change the CISPR NSA in the

international standard B.2.1.1 to reference to the GB/T 6113.104-2016 NSA

requirements and include it in Clause 2.

Attention is drawn to the possibility that some of the elements of this document

may be the subject of patent rights. The issuing authority of this document shall

not be held responsible for identifying any or all such patent rights.

This document was proposed by and shall be under the jurisdiction of National

Technical Committee 79 on Radio Interference of Standardization

Administration of China (SAC/TC 79).

Drafting organizations of this document: China Electronics Standardization

Institute; Suzhou 3ctest Electronic Co., Ltd.; National Institute of Metrology,

China; Xiamen H-noble Scientific Instruments Co., Ltd.; Beijing Zhinan

Technology Co., Ltd.; China National Accreditation Service for Conformity

Assessment; China Household Electric Appliance Research Institute; The Fifth

Electronics Research Institute of the Ministry of Industry and Information

Technology; Southeast University; Beijing TIRT Technology Service Co., Ltd.;

ATS Technology Limited.; Dalian Inspection Research Institute of Product

Quality Co., Ltd.; Jiangsu Electronic Information Product Quality Supervision &

Inspection Institute; GZ CHANGEN Electronic Technology Co., Ltd.; Zhejiang

Noyetec Technology Co., Ltd.; China Automotive Engineering Research

Institute Co., Ltd.; CEPREI Calibration & Testing Center; Ningbo Customs

Technology Center; Jiangsu Institute of Metrology; CVC Certification & Testing

Co., Ltd.; Guangdong CQC South China Testing Technology Co., Ltd.;

Specification for radio disturbance and immunity

measuring apparatus and methods - Part 1-3: Radio

disturbance and immunity measuring apparatus -

Ancillary equipment - Disturbances power

1 Scope

This document specifies the characteristics and calibration of the absorbing

clamp for the measurement of radio disturbance power in the frequency range

30 MHz to 1 GHz.

2 Normative references

The contents of the following documents, through normative references in this

text, constitute indispensable provisions of this document. Among them, for

dated references, only the edition corresponding to that date applies to this

document. For undated references, the latest edition (including all amendments)

applies to this document.

GB/T 4365-2003 Electrotechnical terminology - Electromagnetic

compatibility [IEC 60050(161):1990+A1:1997+A2:1998, IDT]

GB/T 6113.104-2016 Specification for radio disturbance and immunity

measuring apparatus and methods - Part 1-4: Radio disturbance and

immunity measuring apparatus - Antennas and test sites for radiated

disturbance measurements (CISPR 16-1-4:2012, IDT)

CISPR 16-1-2:2003 Specification for radio disturbance and immunity

measuring apparatus and methods - Part 1-2: Radio disturbance and

immunity measuring apparatus - Ancillary equipment - Conducted

disturbances

CISPR 16-2-2:2003 Specification for radio disturbance and immunity

measuring apparatus and methods - Part 2-2: Methods of measurement of

disturbances and immunity - Measurement of disturbance power

CISPR 16-4-2 Specification for radio disturbance and immunity measuring

apparatus and methods - Part 4-2: Uncertainties, statistics and limit

modelling - Measurement instrumentation uncertainty

......