GB/T 4365-2003Electrotechnical terminology -- Electromagnetic compatibility (English PDF)

Foreword

This Standard is identical to the principles of international standard (IEC

60050(161).1990 "International Electrotechnical Vocabulary - Chapter 161.

Electromagnetic compatibility" and its Amendment 1.1997 and Amendment

2.1998); and revises GB/T 4365-1995 "Terminology for electromagnetic

compatibility" (eqv IEC 60050(161).1990). A total of 30 entries are revised.

This Standard has a total of 192 entries. According to the results of the

consultation BETWEEN the High and New Technology Department of

Standardization Administration of the PRC AND National Technical Committee

79 on Radio Jamming of Standardization Administration of China, for the

treatment method in IEC 60050-713.1998 "International Electrotechnical

Vocabulary (IEV) - Part 713.Radiocommunications. transmitters, receivers,

networks and operation" (which has been identically converted to national

standard GB/T 2900.54-2002) developed by IEC TC1 for the modified clauses

of 17 terms of IEC 60050-161 "International Electrotechnical Vocabulary -

Chapter 161.Electromagnetic compatibility", the definition of the corresponding

entry in GB/T 2900.54-2002 is adopted and added in the form of a note to the

definition of the related term in this Standard. After IEC 60050-161 is modified,

this Standard will be modified accordingly.

This Standard, according to the requirements of GB/T 1.1-2000, makes a few

editorial changes. The term number is consistent with IEC 60050(161).1990.

Appendix A and Appendix B of this Standard are informative appendices.

This Standard, from the date of implementation, replaces GB/T 4365-1995

"Terminology for electromagnetic compatibility".

This Standard was proposed by National Technical Committee 79 on Radio

Jamming of Standardization Administration of China.

This Standard shall be under the jurisdiction of National Technical Committee

79 on Radio Jamming of Standardization Administration of China and China

National Technical Committee for Electrotechnical Terminology Standardization.

Responsible drafting organization of this Standard. Shanghai Electrical

Apparatus Research Institute.

Participating drafting organizations of this Standard. State Grid Wuhan High

Voltage Research Institute, China Academy of Machinery Science and

Technology.

Main drafters of this Standard. Gong Zeng, Yang Ziyou, Lang Weichuan, Yang

Electrotechnical terminology –

Electromagnetic compatibility

1 Scope

This Standard specifies the terminology for electromagnetic compatibility in

terms of basic concepts, disturbance waveforms, interference control

measurements, equipment classification, receiver and transmitter, power

controls and supply network impedances, and voltage change and flicker.

This Standard applies to the preparation of various standards and other

technical literature on electromagnetic compatibility.

2 Terminology for electromagnetic compatibility