Valid

GB/T 879.5-2018Spring-type straight pins -- Coiled -- Light duty (English PDF)

弹性圆柱销卷制轻型

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for GB/T 879.5-2018 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

July 1, 2019

Scope

GB/T 879.5-2018 is the English-translated version of 弹性圆柱销卷制轻型.

GB/T 879.5-2018 is the Chinese standard "Spring-type straight pins -- Coiled -- Light duty". Its scope clause reads: This part of GB/T 879 specifies the type dimensions, applications, technical conditions and markings of rolled, lightweight elastomeric pins.

This part is applicable to nominal diameter d1=1.5mm~8mm, steel, austenitic and martensitic stainless steel, rolled and lightly loaded Elastic cylindrical pin. Its clauses include type size.

Found what you need?

Document preview — GB/T 879.5-2018

National Standard of the People's Republic of China

ICS: 21.060.10
Classification: J 13
Replacing: GB/T 879.5-2000

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
1 Scope
2 Normative references
3 type size

1 Scope

This part of GB/T 879 specifies the type dimensions, applications, technical conditions and markings of rolled, lightweight elastomeric pins.

This part is applicable to nominal diameter d1=1.5mm~8mm, steel, austenitic and martensitic stainless steel, rolled and lightly loaded

Elastic cylindrical pin.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 90.1 fastener acceptance inspection (GB/T 90.1-2002, idtISO 3269.2000)

GB/T 90.2 Fastener Marking and Packaging

GB/T 1237 fastener marking method (GB/T 1237-2000, eqvISO 8991.1986)

GB/T 1800.2 Geometrical Product Specifications (GPS) Limits and fits Part 2. Standard tolerance classes and

Table (GB/T 1800.2-2009, ISO 286-2. 1988, MOD)

GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1. Test methods (GB/T 4340.1-2009, ISO 6507-

1.2005, MOD)

GB/T 5267.1 Fastener Plating (GB/T 5267.1-2002, ISO 4042.1999, IDT)

GB/T 5267.2 fastener non-electrolytic zinc sheet coating (GB/T 5267.2-2002, ISO 10683.2000, IDT)

GB/T 5267.4 fastener surface treatment corrosion-resistant stainless steel passivation treatment (GB/T 5267.4-2009, ISO 16048.2003,

IDT)

GB/T 11376 metal phosphate conversion film (GB/T 11376-1997, eqvISO 9717.1990)

GB/T 13683 pin shear test method (GB/T 13683-1992, eqvISO 8749. 1986)

GB/T 15519 chemical conversion film steel black oxide film specification and test method (GB/T 15519-2002, ISO 11408.

1999, MOD)

3 type size

The type and size of the pin are shown in Figure 1 and Table 1.

a Squeeze the chamfer at both ends.

figure 1 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 286 · ISO 6507 · ISO 4042.1999 · ISO 10683.2000 · ISO 16048.2003 · ISO 11408

How to Download GB/T 879.5-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.