GB/T 2624.4-2006Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (English PDF)

GB/T 2624.4-2006 is the English-translated version of 用安装在圆形截面管道中的差压装置测量满管流体流量 第4部分:文丘里管.

GB/T 2624.4-2006 is the Chinese standard "Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes".

Its scope clause reads: This part of GB/T 2624 specifies the geometry and method of use (installation and operating conditions) of Venturi tubes when they are inserted in a conduit running full to determine the flowrate of the fluid flowing in the conduit.

This part of GB/T 2624 also provides background information for calculating the flowrate and is applicable in conjunction with the requirements given in GB/T 2624.1.

This part of GB/T 2624 is applicable only to Venturi tubes in which the flow remains subsonic throughout the measuring section and where the fluid can be considered as single-phase.

In addition, each of these devices can only be used within specified limits of pipe size, roughness, diameter ratio and Reynolds number. This part of GB/T 2624 is not applicable to the measurement of pulsating flow.

It does not cover the use of Venturi tubes in pipes sized less than 50 mm or more than 1 200 mm, or where the pipe Reynolds numbers are below 2x105. This part of GB/T 2624 deals with the three types of classical Venturi tubes: a) cast; b) machined; c) rough welded sheet-iron.

A Venturi tube is a device which consists of a convergent inlet connected to a cylindrical throat which is in turn connected to a conical expanding section called the “divergent”.

The differences between the values of the uncertainty of the discharge coefficient for the three types of classical Venturi tube show, on the one hand, the number of results available for each type of classical Venturi tube and, on the other hand, the more or less precise definition of the geometric profile.

The values are based on data collected many years ago. Venturi nozzles (and other nozzles) are dealt with in GB/T 2624.3.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 40 pages — is available in the English PDF.

1. 1

   Add to cart

   Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

2. 2

   Checkout

   Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

3. 3

   Instant delivery (0–9 sec)

   Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

4. 4

   Invoice included

   A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.